It is a new function added to the llvm::Triple class to simplify the
checking if we are targeting android to clean up the confusion between
android being an OS or an environment.
llvm-svn: 250286
Summary: This was deprecated and removed.
Reviewers: clayborg
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D13463
llvm-svn: 249452
SUMMARY:
This patch includes:
1. Emulation of prologue/epilogue and branch instructions for microMIPS.
2. Setting up alternate disassembler (to be used for microMIPS).
So there will be two disassembler instances, one for microMIPS and other for MIPS.
Appropriate disassembler will be used based on the address class of instruction address.
3. Some of the branch instructions does not have fixed sized delay slot, that means delay slot instruction can be of 2-byte or 4-byte.
For this "m_next_inst_size" has been introduced which stores the size of next instruction (i.e size of delay slot instruction in case of branch).
This can be used wherever the size of next instruction is required.
4. A minor change to use mips32 register names instead of mips64 names.
Reviewers: clayborg, tberghammer
Subscribers: mohit.bhakkad, sagar, jaydeep, nitesh.jain, lldb-commits
Differential Revision: http://reviews.llvm.org/D13282
llvm-svn: 249381
"gcc" register numbers are now correctly referred to as "ehframe"
register numbers. In almost all cases, ehframe and dwarf register
numbers are identical (the one exception is i386 darwin where ehframe
regnums were incorrect).
The old "gdb" register numbers, which I incorrectly thought were
stabs register numbers, are now referred to as "Process Plugin"
register numbers. This is the register numbering scheme that the
remote process controller stub (lldb-server, gdbserver, core file
support, kdp server, remote jtag devices, etc) uses to refer to the
registers. The process plugin register numbers may not be contiguous
- there are remote jtag devices that have gaps in their register
numbering schemes.
I removed all of the enums for "gdb" register numbers that we had
in lldb - these were meaningless - and I put LLDB_INVALID_REGNUM
in all of the register tables for the Process Plugin regnum slot.
This change is almost entirely mechnical; the one actual change in
here is to ProcessGDBRemote.cpp's ParseRegisters() which parses the
qXfer:features:read:target.xml response. As it parses register
definitions from the xml, it will assign sequential numbers as the
eRegisterKindLLDB numbers (the lldb register numberings must be
sequential, without any gaps) and if the xml file specifies register
numbers, those will be used as the eRegisterKindProcessPlugin
register numbers (and those may have gaps). A J-Link jtag device's
target.xml does contain a gap in register numbers, and it only
specifies the register numbers for the registers after that gap.
The device supports many different ARM boards and probably selects
different part of its register file as appropriate.
http://reviews.llvm.org/D12791
<rdar://problem/22623262>
llvm-svn: 247741
Summary:
This doesn't exist in other LLVM projects any longer and doesn't
do anything.
Reviewers: chaoren, labath
Subscribers: emaste, tberghammer, lldb-commits, danalbert
Differential Revision: http://reviews.llvm.org/D12586
llvm-svn: 246749
Change the way EmulateInstruction::eContextPopRegisterOffStack handled
in UnwindAssemblyInstEmulation::WriteRegister to accomodate for
additional cases when eContextPopRegisterOffStack (pop PC/FLAGS).
llvm-svn: 245690
On ARM there is no difference petween a pop and a load instruction so
a register can be loaded multiple times during the function. Add check
to threat the load as a restore only if it do the restore from the
same location where the register was saved.
Differential revision: http://reviews.llvm.org/D11947
llvm-svn: 245546
This patch :
- Fixes offsets of all register sets for Mips.
- Adds MSA register set and FRE=1 mode support for FP register set.
- Separates lldb register numbers and register infos of freebsd/mips64 from linux/mips64.
- Re-orders the register numbers of all kinds for mips to be consistent with freebsd order of register numbers.
Reviewers: jaydeep, clayborg, jasonmolenda, ovyalov, emaste
Subscribers: tberghammer, ovyalov, emaste, mohit.bhakkad, nitesh.jain, bhushan
Differential: http://reviews.llvm.org/D10919
llvm-svn: 245217
SUMMARY:
Last 3bits of the watchpoint address are masked by the kernel. For example, n is
at 0x120010d00 and m is 0x120010d04. When a watchpoint is set at m, then watch
exception is generated even when n is read/written. To handle this case, instruction
at PC is emulated to find the base address of the load/store instruction. This address
is then appended to the description of the stop-info packet. Client then reads this
information to check whether the user has set a watchpoint on this address.
Reviewers: jingham, clayborg
Subscribers: nitesh.jain, mohit.bhakkad, sagar, bhushan and lldb-commits
Differential Revision: http://reviews.llvm.org/D11672
llvm-svn: 244864
This change :
- Fixes offsets of all register sets for Mips.
- Adds MSA register set and FRE=1 mode support for FP register set.
- Separates lldb register numbers and register infos of freebsd/mips64 from linux/mips64.
- Re-orders the register numbers of all kinds for mips to be consistent with freebsd order of register numbers.
- Eliminates ENABLE_128_BIT_SUPPORT and union ValueData from Scalar.cpp and uses llvm::APInt and llvm::APFloat for all integer and floating point types.
Reviewers : emaste, jaydeep, clayborg
Subscribers : emaste, mohit.bhakkad, nitesh.jain, bhushan
Differential : http://reviews.llvm.org/D10919
llvm-svn: 244308
Don't chane the CFI information when a conditional instruction
is emulated (eg.: popeq {r0, pc}) because the CFI for the next
instruction should be the same as the CFI for the current instruction.
Differential revision: http://reviews.llvm.org/D11258
llvm-svn: 242519
SUMMARY:
The patch detects MIPS application specific extensions (ASE) like micromips by reading
ELF header.e_flags and SHT_MIPS_ABIFLAGS section. MIPS triple does not contain ASE
information like micromips, mips16, DSP, MSA etc. These can be read from header.e_flags
or SHT_MIPS_ABIFLAGS section.
Reviewers: clayborg
Subscribers: mohit.bhakkad, sagar, lldb-commits
Differential Revision: http://reviews.llvm.org/D11133
llvm-svn: 242381
Summary: This aligns the library names used by the Makefile build to be the same as those create by the CMake build to make switching between the two easier. The only major difficulty was lldbHost which was one library in the CMake system and several in the Makefile system. Most of the other changes are trivial renames.
Reviewers: labath
Subscribers: emaste, tberghammer, lldb-commits
Differential Revision: http://reviews.llvm.org/D11154
llvm-svn: 242196
The emulation of the branches are required by the new stack
unwinding logic to reinstantiate the prologue at the right place.
Differential revision: http://reviews.llvm.org/D10702
llvm-svn: 240769
* Add and fix the emulation of several instruction.
* Disable frame pointer usage on Android.
* Specify return address register for the unwind plan instead of explict
tracking the value of RA.
* Replace prologue detection heuristics (unreliable in several cases)
with a logic to follow the branch instructions and restore the CFI
value based on them. The target address for a branch should have the
same CFI as the source address (if they are in the same function).
* Handle symbols in ELF files where the symbol size is not specified
with calcualting their size based on the next symbol (already done
in MachO files).
* Fix architecture in FuncUnwinders with filling up the inforamtion
missing from the object file with the architecture of the target.
* Add code to read register wehn the value is set to "IsSame" as it
meanse the value of a register in the parent frame is the same as the
value in the current frame.
Differential revision: http://reviews.llvm.org/D10447
llvm-svn: 240533
SUMMARY:
This patch implements
1. Emulation of MIPS32 branch instructions
2. Enable single-stepping for MIPS32 instructions
3. Correction in emulation of MIPS64 branch instructions with delay slot
4. Adjust breakpoint address when breakpoint is hit in a forbidden slot of compact branch instruction
Reviewers: clayborg
Subscribers: mohit.bhakkad, sagar, bhushan, lldb-commits, emaste, nitesh.jain
Differential Revision: http://reviews.llvm.org/D10596
llvm-svn: 240373
Patch by Jaydeep Patil
SUMMARY:
1. Added emulation of MIPS64 floating-point branch instructions
2. Updated GetRegisterInfo to recognize floating-point registers
3. Provided CPU information while creating createMCSubtargetInfo in disassembler
4. Bug fix in emulation of JIC and JIALC
5. Correct identification of breakpoint when set in a delay slot of a branch instruction
Reviewers: clayborg
Subscribers: bhushan, mohit.bhakkad, sagar, nitesh.jain, lldb-commits.
Differential Revision: http://reviews.llvm.org/D10355
llvm-svn: 239996
Summary:
Implementation of assembly profiler for MIPS32 using EmulateInstruction which currently scans only prologue/epilogue assembly instructions. It uses llvm::MCDisassembler to decode assembly instructions.
Reviewers: clayborg, jasonmolenda
Differential Revision: http://reviews.llvm.org/D9769
llvm-svn: 237420
Removed some unused variables, added some consts, changed some casts
to const_cast. I don't think any of these changes are very
controversial.
Differential Revision: http://reviews.llvm.org/D9674
llvm-svn: 237218
Patch by Jaydeep Patil
EmulateInstructionMIPS64 has been modified to use llvm::MCDisassembler instead of duplicating the decoding logic.
Added emulation of few branch instructions for software single stepping
Reviewers: clayborg, jasonmolenda
Subscribers: bhushan, mohit.bhakkad, sagar, lldb-commits.
Differential Revision: http://reviews.llvm.org/D9319
llvm-svn: 236411
The condition detection code is calculating the result of the condition
based on the first 3 bit of the condition and then negate it if the LSB
of the condition is set. It works for the normal conditions but 0b1110
and 0b1111 are special as both of them should evaluate to true
independently the value of CPSR. This CL removes the negating logic from
those cases.
Differential revision: http://reviews.llvm.org/D9219
llvm-svn: 235715
In the previous ordering some "blx <label>" instruction was recognised
as "b #imm24" instructions causing a failure in the instruction
emulator.
Differential revision: http://reviews.llvm.org/D9218
llvm-svn: 235714
Eugene Zelenko