Summary: This change configures Windows builds to build the complier-rt profile support library (clang_rt.profile-i386.lib). Windows API incompatibilities in the compiler-rt profile lib are also fixed.
Reviewers: davidxl, dnovillo
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D15830
llvm-svn: 256848
This is an initial version of the runtime cross-DSO CFI support
library.
It contains a number of FIXMEs, ex. it does not support the
diagnostic mode nor dlopen/dlclose, but it works and can be tested.
Diagnostic mode, in particular, would require some refactoring (we'd
like to gather all CFI hooks in the UBSan library into one function
so that we could easier pass the diagnostic information down to
__cfi_check). It will be implemented later.
Once the diagnostic mode is in, I plan to create a second test
configuration to run all existing tests in both modes. For now, this
patch includes only a few new cross-DSO tests.
llvm-svn: 255695
This patch enables the safestack for aarch64. The frontend already have
it enabled on all supported architectures and no adjustment is required
in llvm.
The compiler-rt adjustments are basically add on the cmake configuration
to enable the tests and fix the pagesize debug check by getting its
value at runtime (since aarch64 has multiple pagesize depending of
kernel configuration).
llvm-svn: 255345
Summary:
Rather than having to add new "experimental" options each time someone wants to work on bringing a sanitizer to a new platform, this patch makes options for all of them.
The default values for the options are set by the platform checks that would have enabled them, but they can be overridden on or off.
Reviewers: kubabrecka, samsonov
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D14846
llvm-svn: 255170
msse3 is a target dependent flag and must be guarded as check_cxx_compiler_flag()
checks only for compiler error messages and ignores warnings. Earlier COMPILER_RT_HAS_MSSE3_FLAG
is set to "TRUE" for all targets as clang emits warnings and the compilation spits unnecessary
warnings for non-X86 targets. This issue is fixed by coupling the flag with "-Werror"
Differential Revision: http://reviews.llvm.org/D15362
llvm-svn: 255165
This patch is by Simone Atzeni with portions by Adhemerval Zanella.
This contains the LLVM patches to enable the thread sanitizer for
PPC64, both big- and little-endian. Two different virtual memory
sizes are supported: Old kernels use a 44-bit address space, while
newer kernels require a 46-bit address space.
There are two companion patches that will be added shortly. There is
a Clang patch to actually turn on the use of the thread sanitizer for
PPC64. There is also a patch that I wrote to provide interceptor
support for setjmp/longjmp on PPC64.
Patch discussion at reviews.llvm.org/D12841.
llvm-svn: 255057
* Adds COMPILER_RT_EXTERNALIZE_DEBUGINFO option
* On Darwin this results in calling dsymutil and strip after linking
* This generates an error on non-darwin platforms, matching the LLVM behavior
llvm-svn: 254643
For OS X builds of compiler-rt, we run `darwin_test_archs` to determine which architectures can the toolchain target. This detection takes quite a long time, and the result is always the same (as long as you don't upgrade your OS, system headers or toolchain). Let's cache the result.
Differential Revision: http://reviews.llvm.org/D15179
llvm-svn: 254618
Second attempt to enable building ThreadSanitizer (and running tests) on OS X by default.
Differential Revision: http://reviews.llvm.org/D15109
llvm-svn: 254603
If the top-level cmake has a custom make specified through -DCMAKE_MAKE_PROGRAM
then this must be passed along to the sub-build processes in compiler-rt or the
build process will fail.
llvm-svn: 254509
Apparently check_c_compiler_flag isn't a thing everywhere. Not being
incredibly well-versed in cmake, I'm hoping that check_cxx_compiler_flag
serves a similar purpose. :)
llvm-svn: 253648
Turns out that there are some checks in the backend that change code generation for armv7 if you are building against an iOS sys root. For the macho_embedded builtins we really don't want that.
llvm-svn: 253064
We need to add -fPIC to the flags for the builtins in case PIC was turned off at a higher level. We also want to set ENABLE_PIC to Off when building the macho_embedded builtins so the top-level settings don't impact that build.
llvm-svn: 252966
Setting CMAKE_*_FLAGS isn't sufficient here because CMAKE_*_FLAGS_${CMAKE_BUILD_TYPE} can override the flags, and there is no way to safely clear that because it is a cached variable (<sarcasm> YAY! </sarcasm>).
llvm-svn: 252807
* Setting CMAKE_*_FLAGS_${BUILD_TYPE} isn't really needed since we're setting the same value everywhere
* functions sanitize variables differently from macros, darwin_add_embedded_builtin_libraries should be a macro otherwise it won't alter the variables.
llvm-svn: 252618
This commit reverts r252525. I was not really thinking about this fix properly. This doesn't work because it relys on try_compile checks which do a full compile & link. I'm going to put in a temporary solution as an interm step until we have a way to perform compiler checks without linking.
llvm-svn: 252569
Not making sure there are thin libraries results in some difficult to diagnose build failures. This check should make those build failures go away.
llvm-svn: 252527
Hi, this patch adds a CMake flag called `COMPILER_RT_ENABLE_TSAN_OSX`, which is off by default. If enabled, the build system will be building the OS X version of the TSan runtime library (called `libclang_rt.tsan_osx_dynamic.dylib`). I'll submit patches that fix OS X build errors shortly.
This is part of an effort to port TSan to OS X, and it's one the very first steps. Don't expect TSan on OS X to actually work or pass tests at this point.
llvm-svn: 251915
This patch add support for leak sanitizer for aarch64. Similar to
MIPS it uses a SizeClassAllocator32 due VMA constraints (aarch64
currently supports 39 and 42-bit VMA).
It also fixes the android build issue.
llvm-svn: 250898
This patch add support for leak sanitizer for aarch64. Similar to
MIPS it uses a SizeClassAllocator32 due VMA constraints (aarch64
currently supports 39 and 42-bit VMA).
llvm-svn: 249337
Summary: This ports functionality from the clang_macho_embedded.mk platform makefile over to CMake.
Reviewers: bogner, samsonov, bob.wilson
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D13226
llvm-svn: 248850
We don't want to filter out the builtins that are present in libSystem like we do for the normal builtins because kexts can't link libSystem, but we should filter out all the builtins that are generally not supported on the OS and architecture.
llvm-svn: 248756
For Darwin simulator platforms we shouldn't build the cc_kext builtins at all because they aren't applicable, and we should includ the simulator builtins as slices inside the main platform builtin library.
llvm-svn: 248751
This somehow worked with the build on Linux, but seems to fail on the buildbots.
Split the flags apart here as otherwise the two flags are treated as one, and
cause a compilation failure.
llvm-svn: 248654
This adds a new name for ARM32 (armhf). We now force that the default build for
ARM32 (arm) to be soft-float ABI. This has a corresponding clang change to look
for these names based on the floating point ABI. The functions are built
identically (the functions are marked as AAPCS, so the calling convention does
not change, as per the RTABI specification), however, the object file contains
attributes indicating the build configuration which the linker will ensure are
not mix and matched. We now built the appropriate named archive so that we can
link properly.
llvm-svn: 248648
Rename darwin_read_exclude_file to more generic darwin_read_list_from_file, and make it take the file path instead of constructing it so it can be reused more freely.
llvm-svn: 248635
OS and ARCH must be specified, but minimum version may not. Excluding the minimum version will only apply the filters for builtins not supported by the OS and OS-Arch pair.
llvm-svn: 248543
Summary: First pass at adding cc_kext_* builtin libraries. I need to cleanup and refactor the builtin filtering so that I can use it to filter the builtin symbols list, but this is the first step in the right direction.
Reviewers: bob.wilson, bogner, samsonov
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D13115
llvm-svn: 248443
Summary:
Building the builtins on Darwin platforms is a bit complicated. This is a first-pass implementation of the functionality from clang_darwin.mk into CMake.
When building the builtins on Darwin we have layers of blacklists that we apply based on platform, architecture, and minimum supported OS version.
Reviewers: bogner, filcab, bob.wilson, samsonov
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D13059
llvm-svn: 248383
This patch enabled msan for aarch64 with 39-bit VMA and 42-bit VMA.
As defined by lib/msan/msan.h the memory layout used is for 39-bit is:
00 0000 0000 - 40 0000 0000: invalid
40 0000 0000 - 43 0000 0000: shadow
43 0000 0000 - 46 0000 0000: origin
46 0000 0000 - 55 0000 0000: invalid
55 0000 0000 - 56 0000 0000: app (low)
56 0000 0000 - 70 0000 0000: invalid
70 0000 0000 - 80 0000 0000: app (high)
And for 42-bit VMA:
000 0000 0000 - 100 0000 0000: invalid
100 0000 0000 - 11b 0000 0000: shadow
11b 0000 0000 - 120 0000 0000: invalid
120 0000 0000 - 13b 0000 0000: origin
13b 0000 0000 - 2aa 0000 0000: invalid
2aa 0000 0000 - 2ab 0000 0000: app (low)
2ab 0000 0000 - 3f0 0000 0000: invalid
3f0 0000 0000 - 400 0000 0000: app (high)
Most of tests are passing with exception of:
* Linux/mallinfo.cc
* chained_origin_limits.cc
* dlerror.cc
* param_tls_limit.cc
* signal_stress_test.cc
* nonnull-arg.cpp
The 'Linux/mallinfo.cc' is due the fact AArch64 returns the sret in 'x8'
instead of default first argument 'x1'. So a function prototype that
aims to mimic (by using first argument as the return of function) won't
work. For GCC one can make a register alias (register var asm ("r8")), but
for clang it detects is an unused variable and generate wrong code.
The 'chained_origin_limits' is probably due a wrong code generation,
since it fails only when origin memory is used
(-fsanitize-memory-track-origins=2) and only in the returned code
(return buf[50]).
The 'signal_streess_test' and 'nonnull-arg' are due currently missing variadic
argument handling in memory sanitizer code instrumentation on LLVM side.
Both 'dlerror' and 'param_tls_test' are unknown failures that require
further investigation.
All the failures are XFAIL for aarch64 for now.
llvm-svn: 247809
Instead, assume we're going to target triple specified by
COMPILER_RT_DEFAULT_TARGET_TRIPLE and build runtimes for this triple
(and hope that the host compiler can target them).
This will help users that use cross-compiler on their host to build
Clang that would work on a different architecture. This will also come in
handy if one would want to configure several compiler-rt build trees on
the same host, using just-built Clang that can target many
architectures.
This doesn't change the behavior in the default build configuration.
llvm-svn: 247099
Summary:
I broke building the builtins with r245967. This fixes them on Linux and builds them properly for Darwin.
The old code could not be made to work on Darwin as a result of the refactoring of add_compiler_rt_runtime, so I had to rework the way they are built for Darwin. This solution is not ideal and will be fixed in subsequent commits. I just want to get this in so everything is working again.
Reviewers: samsonov, chh, compnerd, bogner
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D12500
llvm-svn: 246487
This patch adds support for tsan on aarch64-linux with 42-bit VMA
(current default config for 64K pagesize kernels). The support is
enabled by defining the SANITIZER_AARCH64_VMA to 42 at build time
for both clang/llvm and compiler-rt. The default VMA is 39 bits.
It also enabled tsan for previous supported VMA (39).
llvm-svn: 246330
Summary:
This is another step in a multi-step refactoring to move add_sanitizer_rt_symbols in the direction of other add_* functions in compiler-rt.
Changes to CMakeLists files are all minimal except ubsan which tests the new ARCHS loop.
Further cleanup patches will follow.
Reviewers: filcab, bogner, kubabrecka, zaks.anna, glider, samsonov
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D12410
llvm-svn: 246199
Summary: This is another step in a multi-step refactoring to move add_sanitizer_rt_symbols in the direction of other add_* functions in compiler-rt.
Reviewers: filcab, bogner, kubabrecka, zaks.anna, glider, samsonov
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D12409
llvm-svn: 246178
Summary: This is the first step in a multi-step refactoring to move add_sanitizer_rt_symbols in the direction of other add_* functions in compiler-rt.
Reviewers: filcab, bogner, kubabrecka, zaks.anna, glider, samsonov
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D12386
llvm-svn: 246102
Summary: This is one more step to allow us to eliminate platform-specific code from the library CMakeLists files. Subsequent patches will refactor all call sites to use this and other new features.
Reviewers: filcab, bogner, kubabrecka, zaks.anna, glider, samsonov
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D12339
llvm-svn: 246047
Summary: This refactoring moves much of the Apple-specific behavior into a function in AddCompilerRT. The next cleanup patch will remove more of the if(APPLE) checks in the outlying CMakeLists.
This patch adds a bunch of new functionality to add_compiler_rt_runtime so that the target names don't need to be reconstructed outside the call. It also updates some of the call sites to exercise the new functionality, but does not update all uses fully. Subsequent patches will further update call sites and move to using the new features.
Reviewers: filcab, bogner, kubabrecka, zaks.anna, glider, samsonov
Subscribers: beanz, rengolin, llvm-commits
Differential Revision: http://reviews.llvm.org/D12292
llvm-svn: 245970
Summary:
There are a number of issues with unit tests on Darwin. These patches address the following:
* Unit tests should be passed -arch (-m32/-m64 isn't sufficient)
* Unit tests should be passed ${DARWIN_osx_CFLAGS} because they're being built for OS X
* Test architectures should be filtered based on base system capabilities (i.e. don't try running x86_64h tests on pre-haswell hardware).
Reviewers: bogner, filcab, kubabrecka
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D12174
llvm-svn: 245580
Summary: This patch consolidates add_compiler_rt_osx_static_runtime and add_compiler_rt_darwin_dynamic_runtime into a single new function add_compiler_rt_darwin_runtime.
Reviewers: filcab, samsonov, bogner
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D12106
llvm-svn: 245317
Summary:
This is a reunification of three separate reviews D11073, D11082, D11083.
Having them separate was not constructive even though the patches were smaller because it led to fragmented conversations, and this is really all about one change.
This patch incorporates feedback from samsonov, and refactors the hacky darwin code out of the root CMakeLists.txt and int config-ix.cmake.
Reviewers: zaks.anna, bogner, kubabrecka, chandlerc, samsonov
Subscribers: jevinskie, filcab, llvm-commits
Differential Revision: http://reviews.llvm.org/D11820
llvm-svn: 244948
This patch enabled TSAN for aarch64 with 39-bit VMA layout. As defined by
tsan_platform.h the layout used is:
0000 4000 00 - 0200 0000 00: main binary
2000 0000 00 - 4000 0000 00: shadow memory
4000 0000 00 - 5000 0000 00: metainfo
5000 0000 00 - 6000 0000 00: -
6000 0000 00 - 6200 0000 00: traces
6200 0000 00 - 7d00 0000 00: -
7d00 0000 00 - 7e00 0000 00: heap
7e00 0000 00 - 7fff ffff ff: modules and main thread stack
Which gives it about 8GB for main binary, 4GB for heap and 8GB for
modules and main thread stack.
Most of tests are passing, with the exception of:
* ignore_lib0, ignore_lib1, ignore_lib3 due a kernel limitation for
no support to make mmap page non-executable.
* longjmp tests due missing specialized assembly routines.
These tests are xfail for now.
The only tsan issue still showing is:
rtl/TsanRtlTest/Posix.ThreadLocalAccesses
Which still required further investigation. The test is disable for
aarch64 for now.
llvm-svn: 244055
This patch enables asan for aarch64/linux. It marks it as 'unstable-release',
since some tests are failing due either kernel missing support of non-executable
pages in mmap or environment instability (infinite loop in juno reference
boards).
It sets decorate_proc_maps test to require stable-release, since the test expects
the shadow memory to not be executable and the support for aarch64 is only
added recently by Linux (da141706aea52c1a9 - 4.0).
It also XFAIL static_tls test for aarch64 linker may omit the __tls_get_addr call
as a TLS optimization.
llvm-svn: 244054
This patch enable DFSan for AArch64 (39-bit VMA). All tests are passing
but:
* test/dfsan/custom.cc
Due an invalid access in dl_iterate_phdr instrumentation (commenting out
this function make the testcase to pass). The test is XFAIL for aarch64
for now.
llvm-svn: 243688
Clang will not define __i686__, even when the target triple is i686,
without -march=i686.
With this patch, the compiler-rt build will successfully detect that
Clang can target i686.
The open_memstream.cc test is a little funny. Before my patch, it
was invoked with "-m32 -m64". To make it work after my -march
change, I had to add '-march=x86-64'.
Differential Revision: http://reviews.llvm.org/D11618
llvm-svn: 243604
Summary:
Although we assume that we can always target host triple, relax
this check to avoid failing at configure-time for cases when we are
not able to correctly infer/verify host triple for some reasons.
See http://llvm.org/bugs/show_bug.cgi?id=24222 for more details.
Reviewers: hans
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D11496
llvm-svn: 243170
Summary:
Exclude external libc++ builds from "all" target, so that they are only
build on demand, and are not installed together with LLVM/Clang.
Reviewers: hans
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D11252
llvm-svn: 242424
Summary:
This patch adds basic memory sanitizer support for PPC64. PR23219.
I have further patches ready to enable it in LLVM and Clang, and to fix
most of the many failing tests in check-msan.
Reviewers: kcc, willschm, samsonov, wschmidt, eugenis
Reviewed By: eugenis
Subscribers: wschmidt, llvm-commits
Differential Revision: http://reviews.llvm.org/D10648
llvm-svn: 240623
Summary:
Use CMake's cmake_parse_arguments() instead.
It's called in a slightly different way, but supports all our use cases.
It's in CMake 2.8.8, which is our minimum supported version.
CMake 3.0 doc (roughly the same. No direct link to 2.8.8 doc):
http://www.cmake.org/cmake/help/v3.0/module/CMakeParseArguments.html?highlight=cmake_parse_arguments
Since I was already changing these calls, I changed ARCH and LIB into
ARCHS and LIBS to make it more clear that they're lists of arguments.
Reviewers: eugenis, samsonov, beanz
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D10529
llvm-svn: 240120
This change makes cmake fail to even run on Darwin with errors
evaluating "$<TARGET_OBJECTS:RTInterception.x86_64>".
This reverts r239955
llvm-svn: 239985
This patch adds runtime support for the Safe Stack protection to compiler-rt
(see http://reviews.llvm.org/D6094 for the detailed description of the
Safe Stack).
This patch is our implementation of the safe stack on top of compiler-rt. The
patch adds basic runtime support for the safe stack to compiler-rt that
manages unsafe stack allocation/deallocation for each thread.
Original patch by Volodymyr Kuznetsov and others at the Dependable Systems
Lab at EPFL; updates and upstreaming by myself.
Differential Revision: http://reviews.llvm.org/D6096
llvm-svn: 239763
Summary:
This change takes darwin-specific goop that was scattered around CMakeLists files and spread between add_compiler_rt_object_library and add_compiler_rt_darwin_object_library and moves it all under add_compiler_rt_object_library.
The goal of this is to try to push platform handling as low in the utility functions as possible.
Reviewers: rnk, samsonov
Reviewed By: rnk, samsonov
Subscribers: rnk, rsmith, llvm-commits
Differential Revision: http://reviews.llvm.org/D10250
llvm-svn: 239498
lib/Target/AArch64/AArch64FrameLowering.cpp:370: virtual void llvm::AArch64FrameLowering::emitPrologue(llvm::MachineFunction&, llvm::MachineBasicBlock&) const: Assertion `!(NeedsRealignment && NumBytes==0) && "NumBytes should never be 0 when realignment is needed"' failed.
llvm-svn: 239352
This is done by creating a named shared memory region, unlinking it
and setting up a private (i.e. copy-on-write) mapping of that instead
of a regular anonymous mapping. I've experimented with regular
(sparse) files, but they can not be scaled to the size of MSan shadow
mapping, at least on Linux/X86_64 and ext3 fs.
Controlled by a common flag, decorate_proc_maps, disabled by default.
This patch has a few shortcomings:
* not all mappings are annotated, especially in TSan.
* our handling of memset() of shadow via mmap() puts small anonymous
mappings inside larger named mappings, which looks ugly and can, in
theory, hit the mapping number limit.
llvm-svn: 238621
Fix a trivial instance of CMP0054 that came up on llvmdev.
The other warnings were CMP0057, which is about using the same file as a
MAIN_DEPENDENCY multiple times. The old behavior hasn't been a problem
yet, so I silenced the warning and filed PR23595 to document the issue
if someone cares.
llvm-svn: 237808
Without the --target flag, clang uses the mips64 triple which selects the n64 abi. We need to add --target=mips-linux-gnu, so that clang can select the correct abi for mips32r2.
Reviewers: dsanders, kcc, samsonov
Subscribers: llvm-commits, mohit.bhakkad, jaydeep
Differential Revision: http://reviews.llvm.org/D9249
llvm-svn: 237675
Summary:
This will allow us to enable it on the buildbot (and then enable a
sanitizer buildbot).
The problem is that gcc for Mips does not accept -m32/-m64 like clang does.
We therefore need to use the nearest equivalent -mips32r2/-mips64r2. We must
also specify -mabi=64 in the -mips64r2 case since gcc's default ABI has
traditionally been N32 whereas clang's is N64.
Reviewers: sagar
Reviewed By: sagar
Subscribers: llvm-commits, samsonov, kcc, mohit.bhakkad, Anand.Takale, sagar
Differential Revision: http://reviews.llvm.org/D8892
llvm-svn: 235299
Summary:
Change the way we use ASan and UBSan together. Instead of keeping two
separate runtimes (libclang_rt.asan and libclang_rt.ubsan), embed UBSan
into ASan and get rid of libclang_rt.ubsan. If UBSan is not supported on
a platform, all UBSan sources are just compiled into dummy empty object
files. UBSan initialization code (e.g. flag parsing) is directly called
from ASan initialization, so we are able to enforce correct
initialization order.
This mirrors the approach we already use for ASan+LSan. This change
doesn't modify the way we use standalone UBSan.
Test Plan: regression test suite
Reviewers: kubabrecka, zaks.anna, rsmith, kcc
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D8646
llvm-svn: 233861
One test case is updated to allow for differences between power and other architectures in behavior when returning from main in certain instances
http://reviews.llvm.org/D8743
llvm-svn: 233813
Passing MSVC-style cflags to the gcc-style clang driver will almost
always end badly. Just translate a couple of simple flags used by the
base CMake cflags like /D, /U, and /O.
llvm-svn: 232219
This reverts commit r229665. It seems that the AArch64 ASAN tests, that
pass on all our internal machines, doesn't like the public buildbot.
Turning this off until we can investigate the public bot for a better
understanding.
llvm-svn: 229739
Prior to this change we built two identical runtimes, named "powerpc64"
and "powerpc64le", while their actual endianness matched the host
endianness.
llvm-svn: 228650
This reverts commit r227966, which turned ASAN on on AArhc64 and may be the
cause of the bots never finishing the check-all. I'll re-apply once we're
sure that bot can cope with it.
llvm-svn: 228023
This commit changes the strategy for building shared ASan runtime
and the way we test it:
- COMPILER_RT_BUILD_SHARED_ASAN CMake option is removed. We now
always build shared ASan runtime (it is the default on Android,
Windows and Mac, and not the default on Linux and FreeBSD).
- Platforms, which use static runtime by default now have
"check-asan-dynamic" testsuite. This testsuite contains instrumented
unit tests, and ASan lit tests, and runs them with shared ASan
runtime. This testsuite is *not* a part of "check-asan" and
*not* a part of "check-all", as adding 1000 more test cases, which
duplicate existing ones is costly. However, you're welcome to
add this command to your buildbot.
llvm-svn: 224470
When CMake builds a dynamic library on Windows, the .dll file's location is
determined by the RUNTIME_OUTPUT_DIRECTORY, which we were previously not
setting.
This means for example that clang_rt.asan_dynamic-i386.dll will get built
and installed in the same directory as the corresponding .lib file,
instead of being built in the bin/ directory and not installed at all.
Differential Revision: http://reviews.llvm.org/D6508
llvm-svn: 223387
Summary:
I don't know anything about profiling but it seems to work out of the
box on PowerPC64. At least "make check-profile" works.
A few tests needed tweaking because PowerPC64 IR declares main with
"define signext i32 @main" instead of just "define i32 @main".
This also fixes the asan asan_and_llvm_coverage_test test, which
compiles with -coverage so requires that a profiling version of
libclang_rt has been built.
Reviewers: dexonsmith, kcc, samsonov
Reviewed By: samsonov
Subscribers: samsonov, llvm-commits
Differential Revision: http://reviews.llvm.org/D6233
llvm-svn: 221877
objects with the powerpc64le name. i.e. asan-powerpc64le.a
This change allows those objects to be built.
Differential Revision: http://reviews.llvm.org/D6043
llvm-svn: 221356
C4146: 'unary minus operator applied to unsigned type, result still unsigned'
C4291: ''declaration' : no matching operator delete found; memory will not be freed if initialization throws an exception'
C4800: ''type' : forcing value to bool 'true' or 'false' (performance warning)'
llvm-svn: 220507
cmake/config-ix.cmake: Enabled building of asan for mipsel arch
test/asan/CMakeLists.txt: Enabled testing of asan for mipsel
Patch by Kumar Sukhani
Differential Revision: http://reviews.llvm.org/D5615
llvm-svn: 219496
Makes sure ARM bots don't run AArch64 and vice-versa, since not all
AArch64 systems can run AArch32 and no ARM hardware can run AArch64.
llvm-svn: 219304
Summary:
Changed cmake/config-ix.cmake to add support for different MIPS architectures: mips, mipsel, mips64, mips64el
In profile code there is no target based dependencies, so just enabling mips flag does the work.
Patch by Mohit Bhakkad
Reviewers: dsanders, void, petarj, kcc, samsonov
Reviewed By: samsonov
Subscribers: llvm-commits, farazs, kumarsukhani
Differential Revision: http://reviews.llvm.org/D4880
llvm-svn: 218866
This is needed so we can produce -i686- named libraries for
x86 Android (which is i686-linux-android).
An alternative solution would be keeping the "i386" name internally and
tweaking the OUTPUT_NAME of compiler-rt libraries.
llvm-svn: 218761
* Detect Android toolchain target arch and set correct runtime library name.
* Merged a lot of Android and non-Android code paths.
* Android is only supported in standalone build of compiler-rt now.
* Linking lsan-common in ASan-Android (makes lsan annotations work).
* Relying on -fsanitize=address linker flag when building tests (again,
unification with non-Android path).
* Runtime library moved from lib/asan to lib/linux.
llvm-svn: 218605
Changed files:
config-ix.cmake: Enabled UBSan for MIPS32
sanitizer_stacktrace.cc: Program counter for MIPS32 is four byte aligned
and a delay slot so subtracted PC by 8 for getting call site address.
cast-overflow.cpp: Added big endian support for this test case.
Patch by Sagar Thakur.
Differential Revision: http://reviews.llvm.org/D4881
llvm-svn: 218519
Summary:
The extra macro definition needs to go into COMPILER_RT_GTEST_CFLAGS
in order to be used for gtests on MSVC2012.
Test Plan: This is part of the fixes necessary for the ASAN tests to pass with MSVC2012.
Reviewers: timurrrr
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D5493
llvm-svn: 218464
Summary: This is copied from llvm/utils/unittest/CMakeLists.txt.
Test Plan: This partly enables building ASAN tests with MSVC2012.
Reviewers: timurrrr
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D5342
llvm-svn: 217762
a given platform in a top-level CMakeLists.txt to use it both
in lib/ and in test/ subdirectories. Move architecture/platform
checks to config-ix.
llvm-svn: 215247
for sanitizers to pass the C++ compilation and exe linking flags through
from the host CMake configuration. We pass the target flags afterward,
allowing them to trump flags as needed. This is particularly important
when the flags direct Clang, even the just-built-Clang, toward the
standard library, linker, and other tools to use.
llvm-svn: 208896
This change lets MSan rely on libcxx's own build system instead of manually
compiling its sources and setting up all the necessary compile flags. It would
also simplify compiling libcxx with another sanitizers (in particular, TSan).
The tricky part is to make sure libcxx is reconfigured/rebuilt when Clang or
MSan runtime library is changed. "clobber" step used in this patch works well
for me, but it's possible it would break for other configurations - will
watch the buildbots.
llvm-svn: 208451
Nathan Slingerland