This causes things like assignment to refer to the '=' rather than the
LHS when attributing the store instruction, for example.
There were essentially 3 options for this:
* The beginning of an expression (this was the behavior prior to this
commit). This meant that stepping through subexpressions would bounce
around from subexpressions back to the start of the outer expression,
etc. (eg: x + y + z would go x, y, x, z, x (the repeated 'x's would be
where the actual addition occurred)).
* The end of an expression. This seems to be what GCC does /mostly/, and
certainly this for function calls. This has the advantage that
progress is always 'forwards' (never jumping backwards - except for
independent subexpressions if they're evaluated in interesting orders,
etc). "x + y + z" would go "x y z" with the additions occurring at y
and z after the respective loads.
The problem with this is that the user would still have to think
fairly hard about precedence to realize which subexpression is being
evaluated or which operator overload is being called in, say, an asan
backtrace.
* The preferred location or 'exprloc'. In this case you get sort of what
you'd expect, though it's a bit confusing in its own way due to going
'backwards'. In this case the locations would be: "x y + z +" in
lovely postfix arithmetic order. But this does mean that if the op+
were an operator overload, say, and in a backtrace, the backtrace will
point to the exact '+' that's being called, not to the end of one of
its operands.
(actually the operator overload case doesn't work yet for other reasons,
but that's being fixed - but this at least gets scalar/complex
assignments and other plain operators right)
llvm-svn: 227027
This workaround was to provide unique call sites to ensure LLVM's inline
debug info handling would properly unique two calls to the same function
on the same line. Instead, this has now been fixed in LLVM (r226736) and
the workaround here can be removed.
Originally committed in r176895, but this isn't a straight revert due to
all the changes since then. I just searched for anything ForcedColumn*
related and removed them.
We could test this - but it didn't strike me as terribly valuable once
we're no longer adding this workaround everything just works as expected
& it's no longer a special case to test for.
llvm-svn: 226738
The code setting the debug location being removed here was accidentally
leaking a location into the call to the non-static data member's ctor
call. Without it the call had no location and could cause assertion
failures if it was inlined. Now that it has a location (and a correct
one at that) this code should hopefully be no longer needed.
It's possible of course that other parts of the debug info are also
relying on the debug locations being set here to leak to where they're
needed - so we might see the same assertions again & will have to
investigate what the dependence was/is. But the chances are good that
any of those are debug info line table quality bugs we've just not found
yet anyway - so it'll be good to flush them out.
llvm-svn: 226383
Several pieces of code were relying on implicit debug location setting
which usually lead to incorrect line information anyway. So I've fixed
those (in r225955 and r225845) separately which should pave the way for
this commit to be cleanly reapplied.
The reason these implicit dependencies resulted in crashes with this
patch is that the debug location would no longer implicitly leak from
one place to another, but be set back to invalid. Once a call with
no/invalid location was emitted, if that call was ever inlined it could
produce invalid debugloc chains and assert during LLVM's codegen.
There may be further cases of such bugs in this patch - they're hard to
flush out with regression testing, so I'll keep an eye out for reports
and investigate/fix them ASAP if they come up.
Original commit message:
Reapply "DebugInfo: Generalize debug info location handling"
Originally committed in r224385 and reverted in r224441 due to concerns
this change might've introduced a crash. Turns out this change fixes the
crash introduced by one of my earlier more specific location handling
changes (those specific fixes are reverted by this patch, in favor of
the more general solution).
Recommitted in r224941 and reverted in r224970 after it caused a crash
when building compiler-rt. Looks to be due to this change zeroing out
the debug location when emitting default arguments (which were meant to
inherit their outer expression's location) thus creating call
instructions without locations - these create problems for inlining and
must not be created. That is fixed and tested in this version of the
change.
Original commit message:
This is a more scalable (fixed in mostly one place, rather than many
places that will need constant improvement/maintenance) solution to
several commits I've made recently to increase source fidelity for
subexpressions.
This resetting had to be done at the DebugLoc level (not the
SourceLocation level) to preserve scoping information (if the resetting
was done with CGDebugInfo::EmitLocation, it would've caused the tail end
of an expression's codegen to end up in a potentially different scope
than the start, even though it was at the same source location). The
drawback to this is that it might leave CGDebugInfo out of sync. Ideally
CGDebugInfo shouldn't have a duplicate sense of the current
SourceLocation, but for now it seems it does... - I don't think I'm
going to tackle removing that just now.
I expect this'll probably cause some more buildbot fallout & I'll
investigate that as it comes up.
Also these sort of improvements might be starting to show a weakness/bug
in LLVM's line table handling: we don't correctly emit is_stmt for
statements, we just put it on every line table entry. This means one
statement split over multiple lines appears as multiple 'statements' and
two statements on one line (without column info) are treated as one
statement.
I don't think we have any IR representation of statements that would
help us distinguish these cases and identify the beginning of each
statement - so that might be something we need to add (possibly to the
lexical scope chain - a scope for each statement). This does cause some
problems for GDB and possibly other DWARF consumers.
llvm-svn: 225956
This reverts commit r225000, r225021, r225083, r225086, r225090.
The root change (r225000) still has several issues where it's caused
calls to be emitted without debug locations. This causes assertion
failures if/when those calls are inlined.
I'll work up some test cases and fixes before recommitting this.
llvm-svn: 225555
PR22096 has several test cases that assert that look fairly different. I'm
adding one of those as an automated test, but when relanding the other cases
should probably be checked as well.
llvm-svn: 225361
r225000 generalized debug info line info handling for expressions such
that this code is no longer necessary.
This removes the last use of CGDebugInfo::getLocation, but not all the
uses of CGDebugInfo::CurLoc, which is still used internally in
CGDebugInfo. I'd like to do away with all of that & might succeed after
a few more patches.
llvm-svn: 225085
The optimization (that appears to have been here since the earliest
implementation (r50848) & has become more complicated over the years) to
avoid recreating the debugloc if it would be the same was out of date
because ApplyDebugLocation was not re-updating the CurLoc/PrevLoc. This
optimization doesn't look terribly beneficial/necessary, so I'm removing
it - if it turns up in benchmarks, I'm happy to reconsider/reimplement
this with justification, but for now it just seems to add
complexity/problems.
llvm-svn: 225083
Originally committed in r224385 and reverted in r224441 due to concerns
this change might've introduced a crash. Turns out this change fixes the
crash introduced by one of my earlier more specific location handling
changes (those specific fixes are reverted by this patch, in favor of
the more general solution).
Recommitted in r224941 and reverted in r224970 after it caused a crash
when building compiler-rt. Looks to be due to this change zeroing out
the debug location when emitting default arguments (which were meant to
inherit their outer expression's location) thus creating call
instructions without locations - these create problems for inlining and
must not be created. That is fixed and tested in this version of the
change.
Original commit message:
This is a more scalable (fixed in mostly one place, rather than many
places that will need constant improvement/maintenance) solution to
several commits I've made recently to increase source fidelity for
subexpressions.
This resetting had to be done at the DebugLoc level (not the
SourceLocation level) to preserve scoping information (if the resetting
was done with CGDebugInfo::EmitLocation, it would've caused the tail end
of an expression's codegen to end up in a potentially different scope
than the start, even though it was at the same source location). The
drawback to this is that it might leave CGDebugInfo out of sync. Ideally
CGDebugInfo shouldn't have a duplicate sense of the current
SourceLocation, but for now it seems it does... - I don't think I'm
going to tackle removing that just now.
I expect this'll probably cause some more buildbot fallout & I'll
investigate that as it comes up.
Also these sort of improvements might be starting to show a weakness/bug
in LLVM's line table handling: we don't correctly emit is_stmt for
statements, we just put it on every line table entry. This means one
statement split over multiple lines appears as multiple 'statements' and
two statements on one line (without column info) are treated as one
statement.
I don't think we have any IR representation of statements that would
help us distinguish these cases and identify the beginning of each
statement - so that might be something we need to add (possibly to the
lexical scope chain - a scope for each statement). This does cause some
problems for GDB and possibly other DWARF consumers.
llvm-svn: 225000
Originally committed in r224385 and reverted in r224441 due to concerns
this change might've introduced a crash. Turns out this change fixes the
crash introduced by one of my earlier more specific location handling
changes (those specific fixes are reverted by this patch, in favor of
the more general solution).
Original commit message:
This is a more scalable (fixed in mostly one place, rather than many
places that will need constant improvement/maintenance) solution to
several commits I've made recently to increase source fidelity for
subexpressions.
This resetting had to be done at the DebugLoc level (not the
SourceLocation level) to preserve scoping information (if the resetting
was done with CGDebugInfo::EmitLocation, it would've caused the tail end
of an expression's codegen to end up in a potentially different scope
than the start, even though it was at the same source location). The
drawback to this is that it might leave CGDebugInfo out of sync. Ideally
CGDebugInfo shouldn't have a duplicate sense of the current
SourceLocation, but for now it seems it does... - I don't think I'm
going to tackle removing that just now.
I expect this'll probably cause some more buildbot fallout & I'll
investigate that as it comes up.
Also these sort of improvements might be starting to show a weakness/bug
in LLVM's line table handling: we don't correctly emit is_stmt for
statements, we just put it on every line table entry. This means one
statement split over multiple lines appears as multiple 'statements' and
two statements on one line (without column info) are treated as one
statement.
I don't think we have any IR representation of statements that would
help us distinguish these cases and identify the beginning of each
statement - so that might be something we need to add (possibly to the
lexical scope chain - a scope for each statement). This does cause some
problems for GDB and possibly other DWARF consumers.
llvm-svn: 224941
This is a more scalable (fixed in mostly one place, rather than many
places that will need constant improvement/maintenance) solution to
several commits I've made recently to increase source fidelity for
subexpressions.
This resetting had to be done at the DebugLoc level (not the
SourceLocation level) to preserve scoping information (if the resetting
was done with CGDebugInfo::EmitLocation, it would've caused the tail end
of an expression's codegen to end up in a potentially different scope
than the start, even though it was at the same source location). The
drawback to this is that it might leave CGDebugInfo out of sync. Ideally
CGDebugInfo shouldn't have a duplicate sense of the current
SourceLocation, but for now it seems it does... - I don't think I'm
going to tackle removing that just now.
I expect this'll probably cause some more buildbot fallout & I'll
investigate that as it comes up.
Also these sort of improvements might be starting to show a weakness/bug
in LLVM's line table handling: we don't correctly emit is_stmt for
statements, we just put it on every line table entry. This means one
statement split over multiple lines appears as multiple 'statements' and
two statements on one line (without column info) are treated as one
statement.
I don't think we have any IR representation of statements that would
help us distinguish these cases and identify the beginning of each
statement - so that might be something we need to add (possibly to the
lexical scope chain - a scope for each statement). This does cause some
problems for GDB and possibly other DWARF consumers.
llvm-svn: 224385
When emitting nested block definitions, the insert-at-point variant of
DIBuilder::insertDeclare() could be called with the insertion point set
to the end-of-BasicBlock sentinel, causing the parent pointer of the
CallInst to be set to the intentionally bogus value of the sentinel.
Fixed by conditionally invoking the correct version of insertDeclare().
rdar://problem/19034882
llvm-svn: 222487
Currently this function would return nothing for functions or globals that
haven't seen a definition yet. Make it return a forward declaration that will
get RAUWed with the definition if one is seen at a later point. The strategy
used to implement this is similar to what's done for types: the forward
declarations are stored in a vector and post processed upon finilization to
perform the required RAUWs.
For now the only user of getDeclarationOrDefinition() is EmitUsingDecl(), thus
this patch allows to emit correct imported declarations even in the absence of
an actual definition of the imported entity.
(Another user will be the debug info generation for argument default values
that I need to resurect).
Differential Revision: http://reviews.llvm.org/D6173
llvm-svn: 222220
Most of the debug info emission is powered essentially from function
definitions - if we emit the definition of a function, we emit the types
of its parameters, the members of those types, and so on and so forth.
For types that aren't referenced even indirectly due to this - because
they only appear in temporary expressions, not in any named variable, we
need to explicitly emit/add them as is done here. This is not the only
case of such code, and we might want to consider handling "void
func(void*); ... func(new T());" (currently debug info for T is not
emitted) at some point, though GCC doesn't. There's a much broader
solution to these issues, but it's a lot of work for possibly marginal
gain (but might help us improve the default -fno-standalone-debug
behavior to be even more aggressive in some places). See the original
review thread for more details.
Patch by jyoti allur (jyoti.yalamanchili@gmail.com)!
Differential Revision: http://reviews.llvm.org/D2498
llvm-svn: 218390
Due to the possible presence of return-by-out parameters, using the LLVM
argument number count when numbering debug info arguments can end up
off-by-one. This could produce two arguments with the same number, which
would in turn cause LLVM to emit only one of those arguments (whichever
it found last) or assert (r215157).
llvm-svn: 215227
Reverting r208106 to reapply r208065 with a fix for the regression. The
issue was that the enum tried to be built even if the declaration hadn't
been constructed for debug info - presenting problems for enum templates
and typedefs of enums with names for linkage purposes.
Original commit message:
This regressed a little further 208055 though it was already a little
broken.
While the requiresCompleteType optimization should be implemented here.
Future (possibly near future) work.
llvm-svn: 208114
This regressed a little further 208055 though it was already a little
broken.
While the requiresCompleteType optimization should be implemented here.
Future (possibly near future) work.
llvm-svn: 208065
CGDebugInfo and DIBuilder were lax in their handling of temporary
MDNodes. All temporary nodes need to be deleted, which means they need
to be RAUW'd with a permanent node. This was not happening.
To ensure this, leverage DIBuilder's new ability to create both
permanent and temporary declarations. Ensure all temporary declarations
are RAUW'd, even with itself. (DIDescriptor::RAUW handles the case where
it is replaced with itself and creates a new, duplicate permanent node
to replace itself with)
This means that all temporary declarations must be added to the
ReplacementMap even if they're never upgraded to definitions - so move
the point of insertion into the map to the point of creation of the
declarations.
llvm-svn: 208055
This takes a different approach than the
completedType/requiresCompleteType work which relies on AST callbacks to
upgrade the type declaration to a definition. Instead, just defer
constructing the definition to the end of the translation unit.
This works because the definition is never needed by other debug info
(so far as I know), whereas the definition of a struct may be needed by
other debug info before the end of the translation unit (such as
emitting the definition of a member function which must refer to that
member function's declaration).
If we had a callback for whenever an IVar was added to an ObjC interface
we could use that, and remove the need for the ObjCInterfaceCache, which
might be nice. (also would need a callback for when it was more than
just a declaration so we could get properties, etc).
A side benefit is that we also don't need the CompletedTypeCache
anymore. Just rely on the declaration-ness of a type to decide whether
its definition is yet to be emitted.
There's still the PR19562 memory leak, but this should hopefully make
that a bit easier to approach.
llvm-svn: 208015
are not associated with any source lines.
Previously, if the Location of a Decl was empty, EmitFunctionStart would
just keep using CurLoc, which would sometimes be correct (e.g., thunks)
but in other cases would just point to a hilariously random location.
This patch fixes this by completely eliminating all uses of CurLoc from
EmitFunctionStart and rather have clients explicitly pass in a
SourceLocation for the function header and the function body.
rdar://problem/14985269
llvm-svn: 205999
sure that a debugger can find them when stepping through code,
for example from the included testcase:
12 int test_it() {
13 c = 1;
14 d = 2;
-> 15 a = 4;
16 return (c == 1);
17 }
18
(lldb) p a
(int) $0 = 2
(lldb) p c
(int) $1 = 2
(lldb) p d
(int) $2 = 2
and a, c, d are all part of the file static anonymous union:
static union {
int c;
int d;
union {
int a;
};
struct {
int b;
};
};
Fixes PR19221.
llvm-svn: 205952
We already got the type alias correct (though I've included a test case
here) since Clang represents that like any other typedef - but type
alias templates weren't being handled.
llvm-svn: 205691
We should only have this optimization fire when the explicit
instantiation definition would cause at least one member function to be
emitted, thus ensuring that even a compiler not performing this
optimization would still emit the full type information elsewhere.
But we should also pessimize output still by always emitting the
definition when the explicit instantiation definition appears so that at
some point in the future we can depend on that information even when no
code had to be emitted in that TU. (this shouldn't happen very often,
since people mostly use explicit spec decl/defs to reduce code size -
but perhaps one day they could use it to explicitly reduce debug info
size too)
This was worth about 2% for Clang and LLVM - so not a huge win, but a
win. It looks really great for simple STL programs (include <string> and
just declare a string - 14k -> 1.4k of .dwo)
llvm-svn: 202769
class and use it pervasively to restore debug locations.
Fixes an interaction between cleanup and EH that caused the location
to not be restored properly after emitting a landing pad.
rdar://problem/15208190
llvm-svn: 199444
C and C++ don't emit an extra lexical scope for the compound statement
that is the body of an Objective-C method.
rdar://problem/15010825
llvm-svn: 198699
GCC ToT doesn't do this & it's worth about 3.2% on Clang's DWO file size
with Clang. Some or all of this may be due to things like r190715 which
could have source fixes/improvements, but it's not clear that's the case
and that doesn't help other source bases.
llvm-svn: 190716
Debug info emission was tripping over an IRGen bug (fixed in r189996)
that was resulting in duplicate emission of static data members of class
templates in namespaces.
We could add more test coverage to debug info for this issue
specifically, but I think the underlying IRGen test is more targeted and
sufficient for the issue.
llvm-svn: 190001
Both functions will take a Type pointer instead of a Decl pointer. This helps
with follow-up type uniquing patches, which need the Type pointer to call
CXX mangler to generate unique identifiers.
No functionality change.
llvm-svn: 189519
This reverts commit r188687 (reverts r188642 (reverts 188600 (reverts
188576))).
With added test coverage & fix for -gline-tables-only.
Thanks Michael Gottesman for reverting this patch when it demonstrated
problems & providing a reproduction/details to help me track this down.
llvm-svn: 188739
This reverts commit r188642.
This change is causing LTO builds to cause our 16 GB machines to swap and OOM
all weekend. I am going to work with Dave Blaikie to resolve the issue.
Sorry Dave =(.
llvm-svn: 188687
This reverts commit r188600.
r188640/r188639 fixed the root cause of the crash-on-valid that r188600
originally introduced. This now appears to bootstrap debug clang
successfully to the best of my testing.
llvm-svn: 188642
Possible minor reduction in debug info & avoid some cases where creating
a context chain could lead to the type the context chain is being
created for, being created. (this is still possible with template
parameters - tests/fixes/improvements to follow)
llvm-svn: 188639
Rather than going through the whole getOrCreateType machinery to
manifest a type, cut straight to the implementation because we know we
have to do work.
While the previous implementation was sufficient for the two cases
(completeness and required completeness) we have already (the general
machinery could inspect the type for those attributes & go down the full
definition path), a pending change (to emit info for types when we emit
their vtables) won't have that luxury & we'll need to force the creation
rather than relying on the general purpose routine.
llvm-svn: 188486
inspired by CodegenFunction::LexicalScope.
- NoLocation temporarily turns off debug locations altogether.
This is useful for emitting instructions that should be
counted towards the function prologue.
- BuiltinLocation temporarily switches to an artificial debug location
that has a valid scope, but no line information. This is useful when
emitting compiler-generated helper functions that have no source
location associated with them.
llvm-svn: 186552
This just seems a bit tidier/more principled. Based on a patch provided
by Adrian - with the only minor tweak that it needed to use
"getTypeOrNull" rather than "getCompletedTypeOrNull" since we don't
store declarations in the CompletedTypes cache.
No intended functionality change.
llvm-svn: 184509
In an effort to make -flimit-debug-info more consistent I over-shot the
mark & made types used via typedefs never produce definitions in the
debug info (even if the type was used in a way that would require a
definition).
The fix for this is to do exactly what I was hoping to do at some point
- plumb the declaration/definition choice through the various layers of
"CreateType" in CGDebugInfo. In this way we can produce declarations
whenever they are sufficient & definitions otherwise - including when
qualifiers are used, for example (discovered in PR14467). This may not
be complete (there may be other types/situations where we need to
propagate the "declaration/definition" choice) but it lays the basic
foundation which we can enhance in future iterations.
llvm-svn: 183296
To make this more consistent with 'getOrCreateType' & clarify the
distinction between the two. The only thing I couldn't quite communicate
in the name is that getOrCreateTypeDeclaration may actually produce a
full definition (in -fno-limit-debug-info) but the point is to call it
whenever only a declaration is needed & the implementation can choose
whether to provide a declaration or definition.
(also, unfortunately, getOrCreateType can produce declarations too - we
should sure this up by making it not do that - any caller that can
tolerate a declaration should be calling getOrCreateTypeDeclaration
instead)
llvm-svn: 182674
This resolves the last of the PR14606 failures in the GDB 7.5 test
suite. (but there are still unresolved issues in the imported_decl case
- we need to implement optional/lazy decls for functions & variables
like we already do for types)
llvm-svn: 182329
This reverts commit r181947 (git d2990ce56a16050cac0d7937ec9919ff54c6df62 )
This addresses one of the two issues identified in r181947, ensuring
that types imported via using declarations only result in a declaration
being emitted for the type, not a definition. The second issue (emitting
using declarations that are unused) is hopefully an acceptable increase
as the real fix for this would be a bit difficult (probably at best we
could record which using directives were involved in lookups - but may
not have been the result of the lookup).
This also ensures that DW_TAG_imported_declarations (& directives) are
not emitted in line-tables-only mode as well as ensuring that typedefs
only require/emit declarations (rather than definitions) for referenced
types.
llvm-svn: 182231
This reverts commit r181393 (git 3923d6a87fe7b2c91cc4a7dbd90c4ec7e2316bcd).
This seems to be emitting too much extra debug info for two (known)
reasons:
* full class definitions are emitted when only declarations are expected
* unused using declarations still produce DW_TAG_imported_declarations
llvm-svn: 181947
Basic support is implemented here - it still doesn't account for
declared-but-not-defined variables or functions. It cannot handle out of
order (declared, 'using', then defined) cases for variables, but can
handle that for functions (& can handle declared, 'using'd, and not
defined at all cases for types).
llvm-svn: 181393
This reverts commit r178497 since the backend has been fixed.
Also add a test to ensure that we're emitting template information for unions.
llvm-svn: 178587
Generate forward declarations that are RAUW'd by finalize().
We thus avoid outputting the same type several times in multiple
stages of completion.
llvm-svn: 176820
This is in preparation for using this to construct the function type for
pointers to member functions to include the implicit/artificial 'this'
parameter in that case as well. (feedback from GDB indicates that this might be
all that's necessary to get it to behave well with Clang's pointer-to-member
function debug output)
llvm-svn: 171809
uncovered.
This required manually correcting all of the incorrect main-module
headers I could find, and running the new llvm/utils/sort_includes.py
script over the files.
I also manually added quite a few missing headers that were uncovered by
shuffling the order or moving headers up to be main-module-headers.
llvm-svn: 169237
in deciding a copy/dispose field is needed in a byref structure
and when generating the copy/dispose helpers. In certain
cases, these fields were being added but no copy/dispose was
being generated. This was uncovered in ARC, but not in MRR.
// rdar://12759433
llvm-svn: 168825
Author: Eric Christopher <echristo@apple.com>
Date: Thu Aug 16 23:50:46 2012 +0000
Add some caching here for the builtin types.
rdar://12117935
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@162066 91177308-0d34-0410-b5e6-96231b3b80d8
after fixing a thinko.
llvm-svn: 162243
This required moving the ctors for IntegerLiteral and FloatingLiteral out of
line which shouldn't change anything as they are usually called through Create
methods that are already out of line.
ASTContext::Deallocate has been a nop for a long time, drop it from ASTVector
and make it independent from ASTContext.h
Pass the StorageAllocator directly to AccessedEntity so it doesn't need to
have a definition of ASTContext around.
llvm-svn: 159718
"Add a completed/incomplete type difference. This allows us to have
partial types for contexts and forward decls while allowing us to
complete types later on for debug purposes.
This piggy-backs on the metadata replacement and rauw changes
for temporary nodes and takes advantage of the incremental
support I added in earlier. This allows us to, if we decide,
to limit adding methods and variables to structures in order
to limit the amount of debug information output into a .o file.
The caching is a bit complicated though so any thoughts on
untangling that are welcome."
with a fix:
- Remove all RAUW during type construction by adding stub versions
of types that we later complete.
and some TODOs:
- Add an RAUW cache for forward declared types so that we can replace
them at the end of compilation.
- Remove the code that updates on completed types because we no
longer need to have that happen. We emit incomplete types on
purpose and only want to know when we want to complete them.
llvm-svn: 150752
partial types for contexts and forward decls while allowing us to
complete types later on for debug purposes.
This piggy-backs on the metadata replacement and rauw changes
for temporary nodes and takes advantage of the incremental
support I added in earlier. This allows us to, if we decide,
to limit adding methods and variables to structures in order
to limit the amount of debug information output into a .o file.
The caching is a bit complicated though so any thoughts on
untangling that are welcome.
llvm-svn: 150631
declaration for the type then go ahead and use that, it's still smaller
than creating an all new derived type.
Part of rdar://10335756 and others.
llvm-svn: 146779
Start handling debug line and scope information better:
Migrate most of the location setting within the larger API in CGDebugInfo and
update a lot of callers.
Remove the existing file/scope change machinery in UpdateLineDirectiveRegion
and replace it with DILexicalBlockFile usage.
Finishes off the rest of rdar://10246360
after fixing a few bugs that were exposed in gdb testsuite testing.
llvm-svn: 141893
Migrate most of the location setting within the larger API in CGDebugInfo and
update a lot of callers.
Remove the existing file/scope change machinery in UpdateLineDirectiveRegion
and replace it with DILexicalBlockFile usage.
Finishes off the rest of rdar://10246360
llvm-svn: 141732
- Remodel Expr::EvaluateAsInt to behave like the other EvaluateAs* functions,
and add Expr::EvaluateKnownConstInt to capture the current fold-or-assert
behaviour.
- Factor out evaluation of bitfield bit widths.
- Fix a few places which would evaluate an expression twice: once to determine
whether it is a constant expression, then again to get the value.
llvm-svn: 141561
invocation function into the debug info. Rather than faking up a class,
which is tricky because of the custom layout we do, we just emit a struct
directly from the layout information we've already got.
Also, don't emit an unnecessarily parameter alloca for this "variable".
llvm-svn: 126255
- BlockDeclRefExprs always store VarDecls
- BDREs no longer store copy expressions
- BlockDecls now store a list of captured variables, information about
how they're captured, and a copy expression if necessary
With that in hand, change IR generation to use the captures data in
blocks instead of walking the block independently.
Additionally, optimize block layout by emitting fields in descending
alignment order, with a heuristic for filling in words when alignment
of the end of the block header is insufficient for the most aligned
field.
llvm-svn: 125005
In this experimental mode try avoiding debug info emission for classes as much as possible. The goal is to reduce size of produced debuginfo without reducing quality of debug info in general. This is a work in progress.
llvm-svn: 115188
not part of the IR, are not uniqued, and may be safely RAUW'd.
This replaces a variety of alternate mechanisms for achieving
the same effect.
llvm-svn: 111682
ObjCObjectType, which is basically just a pair of
one of {primitive-id, primitive-Class, user-defined @class}
with
a list of protocols.
An ObjCObjectPointerType is therefore just a pointer which always points to
one of these types (possibly sugared). ObjCInterfaceType is now just a kind
of ObjCObjectType which happens to not carry any protocols.
Alter a rather large number of use sites to use ObjCObjectType instead of
ObjCInterfaceType. Store an ObjCInterfaceType as a pointer on the decl rather
than hashing them in a FoldingSet. Remove some number of methods that are no
longer used, at least after this patch.
By simplifying ObjCObjectPointerType, we are now able to easily remove and apply
pointers to Objective-C types, which is crucial for a certain kind of ObjC++
metaprogramming common in WebKit.
llvm-svn: 103870
This fixes recent regressions reported by gdb testsuite.
Tighter verification of debug info generated by FE found these regressions.
Refactor code to extract line number and column number from SourceLocation.
llvm-svn: 103678
Adrian Prantl