compiler identification lines in test-cases.
(Doing so only because it's then easier to search for references which
are actually important and need fixing.)
llvm-svn: 351200
isl does not guarantee that set dimension ids will be preserved, so using them
to carry information is not a good idea. Furthermore, the loop information can
be derived without problem from the statement itself. As this even requires
less code than propagating loop information on set dimension ids, starting from
this commit we just derive the loop information in collectSurroundingLoops
directly from the IR.
Interestingly this also results in a couple of isl sets to take a simpler
representation.
llvm-svn: 326664
Without this simplification for a loop nest:
void foo(long n1_a, long n1_b, long n1_c, long n1_d,
long p1_b, long p1_c, long p1_d,
float A_1[][p1_b][p1_c][p1_d]) {
for (long i = 0; i < n1_a; i++)
for (long j = 0; j < n1_b; j++)
for (long k = 0; k < n1_c; k++)
for (long l = 0; l < n1_d; l++)
A_1[i][j][k][l] += i + j + k + l;
}
the assumption:
n1_a <= 0 or (n1_a > 0 and n1_b <= 0) or
(n1_a > 0 and n1_b > 0 and n1_c <= 0) or
(n1_a > 0 and n1_b > 0 and n1_c > 0 and n1_d <= 0) or
(n1_a > 0 and n1_b > 0 and n1_c > 0 and n1_d > 0 and
p1_b >= n1_b and p1_c >= n1_c and p1_d >= n1_d)
is taken rather than the simpler assumption:
p9_b >= n9_b and p9_c >= n9_c and p9_d >= n9_d.
The former is less strict, as it allows arbitrary values of p1_* in case, the
loop is not executed at all. However, in practice these precise constraints
explode when combined across different accesses and loops. For now it seems
to make more sense to take less precise, but more scalable constraints by
default. In case we find a practical example where more precise constraints
are needed, we can think about allowing such precise constraints in specific
situations where they help.
This change speeds up the new test case from taking very long (waited at least
a minute, but it probably takes a lot more) to below a second.
llvm-svn: 296456
Before this patch we bailed if a required invariant load was potentially
overwritten. However, now we will optimistically assume it is actually
invariant and, to this end, restrict the valid parameter space as well as the
execution context with regards to potential overwrites of the location.
llvm-svn: 270416
So far we bailed if a required invariant load was potentially overwritten in
the SCoP. From now on we will optimistically assume it is actually invariant
and, to this end, restrict the valid parameter space.
llvm-svn: 270060
Utilizing the record option for assumptions we can simplify the wrapping
assumption generation a lot. Additionally, we can now report locations
together with wrapping assumptions, though they might not be accurate yet.
llvm-svn: 266069
There are three reasons why we want to record assumptions first before we
add them to the assumed/invalid context:
1) If the SCoP is not profitable or otherwise invalid without the
assumed/invalid context we do not have to compute it.
2) Information about the context are gathered rather late in the SCoP
construction (basically after we know all parameters), thus the user
might see overly complicated assumptions to be taken while they would
have been simplified later on.
3) Currently we cannot take assumptions at any point but have to wait,
e.g., for the domain generation to finish. This makes wrapping
assumptions much more complicated as they need to be and it will
have a similar effect on "signed-unsigned" assumptions later.
llvm-svn: 266068
As a CFG is often structured we can simplify the steps performed during
domain generation. When we push domain information we can utilize the
information from a block A to build the domain of a block B, if A dominates B
and there is no loop backede on a path from A to B. When we pull domain
information we can use information from a block A to build the domain of a
block B if B post-dominates A. This patch implements both ideas and thereby
simplifies domains that were not simplified by isl. For the FINAL basic block
in test/ScopInfo/complex-successor-structure-3.ll we used to build a universe
set with 81 basic sets. Now it actually is represented as universe set.
While the initial idea to utilize the graph structure depended on the
dominator and post-dominator tree we can use the available region
information as a coarse grained replacement. To this end we push the
region entry domain to the region exit and pull it from the region
entry for the region exit if applicable.
With this patch we now successfully compile
External/SPEC/CINT2006/400_perlbench/400_perlbench
and
SingleSource/Benchmarks/Adobe-C++/loop_unroll.
Differential Revision: http://reviews.llvm.org/D18450
llvm-svn: 265285
These caused LNT failures due to new assertions when running with
-polly-position=before-vectorizer -polly-process-unprofitable for:
FAIL: clamscan.compile_time
FAIL: cjpeg.compile_time
FAIL: consumer-jpeg.compile_time
FAIL: shapes.compile_time
FAIL: clamscan.execution_time
FAIL: cjpeg.execution_time
FAIL: consumer-jpeg.execution_time
FAIL: shapes.execution_time
The failures have been introduced by r264782, but r264789 had to be reverted
as it depended on the earlier patch.
llvm-svn: 264885
As a CFG is often structured we can simplify the steps performed
during domain generation. When we push domain information we can
utilize the information from a block A to build the domain of a
block B, if A dominates B. When we pull domain information we can
use information from a block A to build the domain of a block B
if B post-dominates A. This patch implements both ideas and thereby
simplifies domains that were not simplified by isl. For the FINAL
basic block in
test/ScopInfo/complex-successor-structure-3.ll .
we used to build a universe set with 81 basic sets. Now it actually is
represented as universe set.
While the initial idea to utilize the graph structure depended on the
dominator and post-dominator tree we can use the available region
information as a coarse grained replacement. To this end we push the
region entry domain to the region exit and pull it from the region
entry for the region exit.
Differential Revision: http://reviews.llvm.org/D18450
llvm-svn: 264789
ISL can conclude additional conditions on parameters from restrictions
on loop variables. Such conditions persist when leaving the loop and the
loop variable is projected out. This results in a narrower domain for
exiting the loop than entering it and is logically impossible for
non-infinite loops.
We fix this by not adding a lower bound i>=0 when constructing BB
domains, but defer it to when also the upper bound it computed, which
was done redundantly even before this patch.
This reduces the number of LNT fails with -polly-process-unprofitable
-polly-position=before-vectorizer from 8 to 6.
llvm-svn: 264118
In order to speed up compile time and to avoid random timeouts we now
separately track assumptions and restrictions. In this context
assumptions describe parameter valuations we need and restrictions
describe parameter valuations we do not allow. During AST generation
we create a runtime check for both, whereas the one for the
restrictions is negated before a conjunction is build.
Except the In-Bounds assumptions we currently only track restrictions.
Differential Revision: http://reviews.llvm.org/D17247
llvm-svn: 262328
ISL 0.16 will change how sets are printed which breaks 117 unit tests
that text-compare printed sets. This patch re-formats most of these unit
tests using a script and small manual editing on top of that. When
actually updating ISL, most work is done by just re-running the script
to adapt to the changed output.
Some tests that compare IR and tests with single CHECK-lines that can be
easily updated manually are not included here.
The re-format script will also be committed afterwards. The per-test
formatter invocation command lines options will not be added in the near
future because it is ad hoc and would overwrite the manual edits.
Ideally it also shouldn't be required anymore because ISL's set printing
has become more stable in 0.16.
Differential Revision: http://reviews.llvm.org/D16095
llvm-svn: 257851
Call assumeNoOutOfBound only in updateDimensionality to process situations
when new dimensions are added and new bounds checks are required.
Contributed-by: Tobias Grosser, Gareev Roman
llvm-svn: 257170
Fangrui Song