This is a restricted version of the combine in `DAGCombiner::MatchLoadCombine`.
(See D27861)
This tries to recognize patterns like below (assuming a little-endian target):
```
s8* x = ...
s32 val = a[0] | (a[1] << 8) | (a[2] << 16) | (a[3] << 24)
->
s32 val = *((i32)a)
s8* x = ...
s32 val = a[3] | (a[2] << 8) | (a[1] << 16) | (a[0] << 24)
->
s32 val = BSWAP(*((s32)a))
```
(This patch also handles the big-endian target case as well, in which the first
example above has a BSWAP, and the second example above does not.)
To recognize the pattern, this searches from the last G_OR in the expression
tree.
E.g.
```
Reg Reg
\ /
OR_1 Reg
\ /
OR_2
\ Reg
.. /
Root
```
Each non-OR register in the tree is put in a list. Each register in the list is
then checked to see if it's an appropriate load + shift logic.
If every register is a load + potentially a shift, the combine checks if those
loads + shifts, when OR'd together, are equivalent to a wide load (possibly with
a BSWAP.)
To simplify things, this patch
(1) Only handles G_ZEXTLOADs (which appear to be the common case)
(2) Only works in a single MachineBasicBlock
(3) Only handles G_SHL as the bit twiddling to stick the small load into a
specific location
An IR example of this is here: https://godbolt.org/z/4sP9Pj (lifted from
test/CodeGen/AArch64/load-combine.ll)
At -Os on AArch64, this is a 0.5% code size improvement for CTMark/sqlite3,
and a 0.4% improvement for CTMark/7zip-benchmark.
Also fix a bug in `isPredecessor` which caused it to fail whenever `DefMI` was
the first instruction in the block.
Differential Revision: https://reviews.llvm.org/D94350
Add a triple for powerpcle-*-*.
This is a little-endian encoding of the 32-bit PowerPC ABI, useful in certain niche situations:
1) A loader such as the FreeBSD loader which will be loading a little endian kernel. This is required for PowerPC64LE to load properly in pseries VMs.
Such a loader is implemented as a freestanding ELF32 LSB binary.
2) Userspace emulation of a 32-bit LE architecture such as x86 on 64-bit hosts such as PowerPC64LE with tools like box86 requires having a 32-bit LE toolchain and library set, as they operate by translating only the main binary and switching to native code when making library calls.
3) The Void Linux for PowerPC project is experimenting with running an entire powerpcle userland.
Reviewed By: MaskRay
Differential Revision: https://reviews.llvm.org/D93918
This patch adds support for the fptoui.sat and fptosi.sat intrinsics,
which provide basically the same functionality as the existing fptoui
and fptosi instructions, but will saturate (or return 0 for NaN) on
values unrepresentable in the target type, instead of returning
poison. Related mailing list discussion can be found at:
https://groups.google.com/d/msg/llvm-dev/cgDFaBmCnDQ/CZAIMj4IBAAJ
The intrinsics have overloaded source and result type and support
vector operands:
i32 @llvm.fptoui.sat.i32.f32(float %f)
i100 @llvm.fptoui.sat.i100.f64(double %f)
<4 x i32> @llvm.fptoui.sat.v4i32.v4f16(half %f)
// etc
On the SelectionDAG layer two new ISD opcodes are added,
FP_TO_UINT_SAT and FP_TO_SINT_SAT. These opcodes have two operands
and one result. The second operand is an integer constant specifying
the scalar saturation width. The idea here is that initially the
second operand and the scalar width of the result type are the same,
but they may change during type legalization. For example:
i19 @llvm.fptsi.sat.i19.f32(float %f)
// builds
i19 fp_to_sint_sat f, 19
// type legalizes (through integer result promotion)
i32 fp_to_sint_sat f, 19
I went for this approach, because saturated conversion does not
compose well. There is no good way of "adjusting" a saturating
conversion to i32 into one to i19 short of saturating twice.
Specifying the saturation width separately allows directly saturating
to the correct width.
There are two baseline expansions for the fp_to_xint_sat opcodes. If
the integer bounds can be exactly represented in the float type and
fminnum/fmaxnum are legal, we can expand to something like:
f = fmaxnum f, FP(MIN)
f = fminnum f, FP(MAX)
i = fptoxi f
i = select f uo f, 0, i # unnecessary if unsigned as 0 = MIN
If the bounds cannot be exactly represented, we expand to something
like this instead:
i = fptoxi f
i = select f ult FP(MIN), MIN, i
i = select f ogt FP(MAX), MAX, i
i = select f uo f, 0, i # unnecessary if unsigned as 0 = MIN
It should be noted that this expansion assumes a non-trapping fptoxi.
Initial tests are for AArch64, x86_64 and ARM. This exercises all of
the scalar and vector legalization. ARM is included to test float
softening.
Original patch by @nikic and @ebevhan (based on D54696).
Differential Revision: https://reviews.llvm.org/D54749
The runtime library has two family library implementation for ppc_fp128 and fp128.
For IBM Long double(ppc_fp128), it is suffixed with 'l', i.e(sqrtl). For
IEEE Long double(fp128), it is suffixed with "ieee128" or "f128".
We miss to map several libcall for IEEE Long double.
Reviewed By: qiucf
Differential Revision: https://reviews.llvm.org/D91675
Sometimes people get minimal crash reports after a UBSAN incident. This change
tags each trap with an integer representing the kind of failure encountered,
which can aid in tracking down the root cause of the problem.
Add tests for this particular detail for x86 and arm (similar tests
already existed for x86_64 and aarch64).
The libssp implementation may be located in a separate DLL, and in
those cases, the references need to be in a .refptr stub, to avoid
needing to touch up code in the text section at runtime (which is
supported but inefficient for x86, and unsupported for arm).
Differential Revision: https://reviews.llvm.org/D92738
This patch implements out of line atomics for LSE deployment
mechanism. Details how it works can be found in llvm/docs/Atomics.rst
Options -moutline-atomics and -mno-outline-atomics to enable and disable it
were added to clang driver. This is clang and llvm part of out-of-line atomics
interface, library part is already supported by libgcc. Compiler-rt
support is provided in separate patch.
Differential Revision: https://reviews.llvm.org/D91157
Hook up legalizations for VECREDUCE_SEQ_FMUL. This is following up on the VECREDUCE_SEQ_FADD work from D90247.
Differential Revision: https://reviews.llvm.org/D90644
Add Legalization support for VECREDUCE_SEQ_FADD, so that we don't need to depend on ExpandReductionsPass.
Differential Revision: https://reviews.llvm.org/D90247
In certain places in llvm/lib/CodeGen we were relying upon the TypeSize
comparison operators when in fact the code was only ever expecting
either scalar values or fixed width vectors. I've changed some of these
places to use the equivalent scalar operator.
Differential Revision: https://reviews.llvm.org/D88482
This passes existing X86 test but I'm not sure if it handles all type
legalization cases it needs to.
Alternative to D89200
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D89222
I have introduced a new template PolySize class, where the template
parameter determines the type of quantity, i.e. for an element
count this is just an unsigned value. The ElementCount class is
now just a simple derivation of PolySize<unsigned>, whereas TypeSize
is more complicated because it still needs to contain the uint64_t
cast operator, since there are still many places in the code that
rely upon this implicit cast. As such the class also still needs
some of it's own operators.
I've tried to minimise the amount of code in the base PolySize
class, which led to a couple of changes:
1. In some places we were relying on '==' operator comparisons
between ElementCounts and the scalar value 1. I didn't put this
operator in the new PolySize class, and thought it was actually
clearer to use the isScalar() function instead.
2. I removed the isByteSized function and replaced it with calls
to isKnownMultipleOf(8).
I've also renamed NextPowerOf2 to be coefficientNextPowerOf2 so
that it's more consistent with coefficientDivideBy.
Differential Revision: https://reviews.llvm.org/D88409
When we know that a particular type is always going to be fixed
width we have so far been writing code like this:
getSizeInBits().getFixedSize()
Since we are doing this in quite a few places now it seems to make
sense to add a new helper function that allows us to replace
these calls with a single getFixedSizeInBits() call.
Differential Revision: https://reviews.llvm.org/D88649
After some recent upstream discussion we decided that it was best
to avoid having the / operator for both ElementCount and TypeSize,
since this could give the impression that these classes can be used
in the same way as basic integer integer types. However, division
for scalable types is a bit odd because we are only dividing the
minimum quantity by a value, as opposed to something like:
(MinSize * Vscale) / SomeValue
This is why when performing division it's important the caller
first establishes whether the operation makes sense, perhaps by
calling isKnownMultipleOf() prior to division. The caller must now
explictly call divideCoefficientBy() on the class to perform the
operation.
Differential Revision: https://reviews.llvm.org/D87700
An existing function Type::getScalarSizeInBits returns a uint64_t
instead of a TypeSize class because the caller is requesting a
scalar size, which cannot be scalable. This patch makes other
similar functions requesting a scalar size consistent with that,
thereby eliminating more than 1000 implicit TypeSize -> uint64_t
casts.
Differential revision: https://reviews.llvm.org/D87889
Clang emits (and (ctpop X), 1) for __builtin_parity. If ctpop
isn't natively supported by the target, this leads to poor codegen
due to the expansion of ctpop being more complex than what is needed
for parity.
This adds a DAG combine to convert the pattern to ISD::PARITY
before operation legalization. Type legalization is updated
to handled Expanding and Promoting this operation. If after type
legalization, CTPOP is supported for this type, LegalizeDAG will
turn it back into CTPOP+AND. Otherwise LegalizeDAG will emit a
series of shifts and xors followed by an AND with 1.
I've avoided vectors in this patch to avoid more legalization
complexity for this patch.
X86 previously had a custom DAG combiner for this. This is now
moved to Custom lowering for the new opcode. There is a minor
regression in vector-reduce-xor-bool.ll, but a follow up patch
can easily fix that.
Fixes PR47433
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D87209
This patch changes ElementCount so that the Min and Scalable
members are now private and can only be accessed via the get
functions getKnownMinValue() and isScalable(). In addition I've
added some other member functions for more commonly used operations.
Hopefully this makes the class more useful and will reduce the
need for calling getKnownMinValue().
Differential Revision: https://reviews.llvm.org/D86065
(Disabled under flag for the moment)
This is part of a larger project wherein we are finally integrating lowering of gc live operands with the register allocator. Today, we force spill all operands in SelectionDAG. The code to do so is distinctly non-optimal. The approach this patch is working towards is to instead lower the relocations directly into the MI form, and let the register allocator pick which ones get spilled and which stack slots they get spilled to. In terms of performance, the later part is actually more important as it avoids redundant shuffling of values between stack slots.
This particular change adds ISEL support to produce the variadic def STATEPOINT form required by the above. In particular, the first N are lowered to variadic tied def/use pairs. So new statepoint looks like this:
reloc1,reloc2,... = STATEPOINT ..., base1, derived1<tied-def0>, base2, derived2<tied-def1>, ...
N is limited by the maximal number of tied registers machine instruction can have (15 at the moment).
The current patch is restricted to handling relocations within a single basic block. Cross block relocations (e.g. invokes) are handled via the legacy mechanism. This restriction will be relaxed in future patches.
Patch By: dantrushin
Differential Revision: https://reviews.llvm.org/D81648
Added NextPowerOf2() routine to TypeSize and rewritten the code
in getVectorTypeBreakdown to avoid warnings being generated.
Differential Revision: https://reviews.llvm.org/D81578
Summary:
Note to downstream target maintainers: this might silently change the semantics of your code if you override `TargetLowering::allowsMemoryAccess` without marking it override.
This patch is part of a series to introduce an Alignment type.
See this thread for context: http://lists.llvm.org/pipermail/llvm-dev/2019-July/133851.html
See this patch for the introduction of the type: https://reviews.llvm.org/D64790
Reviewers: courbet
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D81379
Scalable vectors cannot use 'BUILD_VECTOR', so it is necessary to
properly split and widen scalable vectors when passing them
to CopyToReg/CopyFromReg.
This functionality is added to TargetLoweringBase::getVectorTypeBreakdown().
This patch only adds support for 'splitting' scalable vectors that
are a multiple of some legal type, e.g.
<vscale x 6 x i64> -> 3 x <vscale x 2 x i64>
Reviewers: efriedma, c-rhodes
Reviewed By: efriedma
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D80139
This patch updates TargetLoweringBase::computeRegisterProperties and
TargetLoweringBase::getTypeConversion to support scalable vectors,
and make the right calls on how to legalise them. These changes are required
to legalise both MVTs and EVTs.
Reviewers: efriedma, david-arm, ctetreau
Reviewed By: efriedma
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D80640
Current implementation of emitPatchpoint() is very inefficient:
for every FrameIndex operand if creates new MachineInstr with
that operand expanded and all other copied as is.
Since PATCHPOINT/STATEPOINT instructions may have *a lot* of
FrameIndex operands, we end up creating and erasing many
machine instructions. But we can do it in single pass, with only
one new machine instruction generated.
Reviewed By: reames
Differential Revision: https://reviews.llvm.org/D81181
This intrinsic implements IEEE-754 operation roundToIntegralTiesToEven,
and performs rounding to the nearest integer value, rounding halfway
cases to even. The intrinsic represents the missed case of IEEE-754
rounding operations and now llvm provides full support of the rounding
operations defined by the standard.
Differential Revision: https://reviews.llvm.org/D75670
Summary:
This patch handles illegal scalable types when lowering IR operations,
addressing several places where the value of isScalableVector() is
ignored.
For types such as <vscale x 8 x i32>, this means splitting the
operations. In this example, we would split it into two
operations of type <vscale x 4 x i32> for the low and high halves.
In cases such as <vscale x 2 x i32>, the elements in the vector
will be promoted. In this case they will be promoted to
i64 (with a vector of type <vscale x 2 x i64>)
Reviewers: sdesmalen, efriedma, huntergr
Reviewed By: efriedma
Subscribers: david-arm, tschuett, hiraditya, rkruppe, psnobl, cfe-commits, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D78812
Summary:
This is patch is part of a series to introduce an Alignment type.
See this thread for context: http://lists.llvm.org/pipermail/llvm-dev/2019-July/133851.html
See this patch for the introduction of the type: https://reviews.llvm.org/D64790
Reviewers: courbet
Subscribers: arsenm, dschuff, sdardis, nemanjai, jvesely, nhaehnle, sbc100, jgravelle-google, hiraditya, aheejin, kbarton, jrtc27, atanasyan, jfb, kerbowa, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D76925
Craig Topper