The new domain construction algorithm now correctly models this test case (and
derives an empty run-time condition). Add this test case to ensure we do not
regress.
llvm-svn: 248669
When the whole SCoP is a non-affine region we need to use the
surrounding loop in the construction of the schedule as that is
the one that will be looked up after the schedule generation.
This fixes bug 24947
llvm-svn: 248667
When recovering multi-dimensional memory accesses, it may happen that different
accesses to the same base array are recovered with different dimensionality.
This patch ensures that the dimensionalities are unified by adding zero valued
dimensions to acesses with lower dimensionality. When starting to model
fixed-size arrays as multi-dimensional in 247906, this has not been taken
care of.
llvm-svn: 248662
There are three possible reasons to add a memory memory access: For explicit load and stores, for llvm::Value defs/uses, and to emulate PHI nodes (the latter two called implicit accesses). Previously MemoryAccess only stored IsPHI. Register accesses could be identified through the isScalar() method if it was no IsPHI. isScalar() determined the number of dimensions of the underlaying array, scalars represented by zero dimensions.
For the work on de-LICM, implicit accesses can have more than zero dimensions, making the distinction of isScalars() useless, hence now stored explicitly in the MemoryAccess. Instead, we replace it by isImplicit() and avoid the term scalar for zero-dimensional arrays as it might be confused with llvm::Value which are also often referred to as scalars (or alternatively, as registers).
No behavioral change intended, under the condition that it was impossible to create explicit accesses to zero-dimensional "arrays".
llvm-svn: 248616
This makes the intent of each created object clearer and allows to add more specific asserts. The bug fixed in r248535 has been discovered this way.
No functional change intended; everything should behave as before.
llvm-svn: 248603
This change addresses three issues:
- Read only scalars that enter a PHI node through an edge that comes from
outside the scop are not modeled any more, as such PHI nodes will always
be initialized to this initial value right before the SCoP is entered.
- For PHI nodes that depend on a scalar value that is defined outside the
scop, but where the scalar values is passed through an edge that itself
comes from a BB that is part of the region, we introduce in this basic
block a read of the out-of-scop value to ensure it's value is available
to write it into the PHI alloc location.
- Read only uses of scalars by PHI nodes are ignored in the general read only
handling code, as they are taken care of by the general PHI node modeling
code.
llvm-svn: 248535
After the merge of TempScopInfo into ScopInfo the analysis output
remained because of the existing unit tests. These remains are removed
and the units tests converted to match the equivalent output of
ScopInfo's analysis output. The unit tests are also moved into the
directory of ScopInfo tests.
Differential Revision: http://reviews.llvm.org/D13116
llvm-svn: 248485
Refactor all ISL-related cmake build instructions into its own
CMakeLists.txt and build as a separate library.
This is useful to apply ISL-related build flags to ISL only and not to
Polly's files. Also, it the separation of both projects becomes clearer.
Proposed name of the library is Polly_isl. It is not "isl" to avoid
mix-up with potentially installed libisl.{a|so}.
Tested configurations:
- Windows with cmake 3.2
- Ubuntu with cmake 3.0.2
- Ubuntu with cmake 3.0.2 BUILD_SHARED_LIBS on
- Ubuntu with cmake 2.8.12.2 (LLVM minimum version)
- Ubuntu out-of-LLVM-tree
Differential Revision: http://reviews.llvm.org/D12810
llvm-svn: 248484
A missing return statement that previously did not have a visibly negative
effect caused after some data-structure changes in r248024 multi-dimensional
accesses to be modeled both multi-dimensional as well as linearized. This
commit adds the missing return to avoid the incorrect double modeling as
well as the compile time increases it caused.
llvm-svn: 248171
If we encounter a <nsw> tagged AddRec for a loop we know the trip count of
that loop has to be bounded or the semantics is undefined anyway. Hence, we
only need to add unbounded assumptions if no such AddRec is known.
llvm-svn: 248128
So far we ignored the unbounded parts of the iteration domain, however
we need to assume they do not occure at all to remain sound if they do.
llvm-svn: 248126
We now add loop carried information during the second traversal of the
region instead of in a intermediate step in-between. This makes the
generation simpler, removes code and should even be faster.
llvm-svn: 248125
In order to allow multiple back edges we:
- compute the conditions under which each back edge is taken
- build the union over all these conditions, thus the condition that
any back edge is taken
- apply the same logic to the union we applied to a single back edge
llvm-svn: 248120
As we currently do not perform any optimizations that targets (or is
even aware) small trip counts we will skip them when we count the
loops in a region.
llvm-svn: 248119
All MemoryAccess objects will be owned by ScopInfo::AccFuncMap which
previously stored the IRAccess objects. Instead of creating new
MemoryAccess objects, the already created ones are reused, but their
order might be different now. Some fields of IRAccess and MemoryAccess
had the same meaning and are merged.
This is the last step of fusioning TempScopInfo.{h|cpp} and
ScopInfo.{h.cpp}. Some refactoring might still make sense.
Differential Revision: http://reviews.llvm.org/D12843
llvm-svn: 248024
In some cases instcombine introduces bitcasts that slightly obfuscate the
multi-dimensionality of an array. This patch teaches our fixed-size
delinearization how to look through bitcasts.
llvm-svn: 247928
This information is implicitly available through the multi-dimensionality of
memory accesses. This reduces compile time for 3mm from 430ms to 400ms and
should generally benefit compile time for cases where the assumed context
is complex.
llvm-svn: 247907
If the GEP instructions give us enough insights, model scalar accesses as
multi-dimensional (and generate the relevant run-time checks to ensure
correctness). This will allow us to simplify the dependence computation in
a subsequent commit.
llvm-svn: 247906
This will allow to generate non-wrap assumptions for integer expressions
that are part of the SCoP. We compare the common isl representation of
the expression with one computed with modulo semantic. For all parameter
combinations they are not equal we can have integer overflows.
The nsw flags are respected when the modulo representation is computed,
nuw and nw flags are ignored for now.
In order to not increase compile time to much, the non-wrap assumptions
are collected in a separate boundary context instead of the assumed
context. This helps compile time as the boundary context can become
complex and it is therefor not advised to use it in other operations
except runtime check generation. However, the assumed context is e.g.,
used to tighten dependences. While the boundary context might help to
tighten the assumed context it is doubtful that it will help in practice
(it does not effect lnt much) as the boundary (or no-wrap assumptions)
only restrict the very end of the possible value range of parameters.
PET uses a different approach to compute the no-wrap context, though lnt runs
have shown that this version performs slightly better for us.
llvm-svn: 247732
Due to the new domain generation, the SCoP keeps track of the domain
for all blocks, thus the SCEVAffinator can now work with blocks to avoid
duplication of the domains.
llvm-svn: 247731
Add polly-check-format as dependency of check-polly if clang-format is
available in the same build.
Differential Revision: http://reviews.llvm.org/D12850
llvm-svn: 247600
Summary:
Make clang-format run on each file independently using
add_custom_format (instead using a shell script in utils/). The targets
polly-{update|check}-format depend on these.
The primary motivation is to make them work on Windows, but also
improves them generally:
- Each file update/check can run in parallel (Although they do not take
long to run anyway)
- Implicit dependency on clang-format, so it recompiles if necessary
- polly-check-format shows the formatting difference if failing
Differential Revision: http://reviews.llvm.org/D12837
llvm-svn: 247581
At some point we build loop trip counts using this method. It was replaced by
a simpler trick that works only for affine (e.g., not modulo) constraints and
relies on the removal of unbounded parts. In order to allow modulo constrains
again we go back to the former, more accurate method.
llvm-svn: 247540
Summary:
TempScop is basically a holder for AccFuncMap, the dictionary from BasicBlocks to IRAccess lists. We move the list into polly::Scop and remove the polly::TempScop class.
There is one small change in behavior: If ScopInfo finds that its AssumedContext is impossible, it bails out by deleting the Scop object. The TempScop::print (invoked with opt -polly-scops -analyze) cannot print the AccFuncMap anymore as it would with a separate TempScop.
Differential Revision: http://reviews.llvm.org/D12803
llvm-svn: 247480
When compiling Polly without LLVM sources but with system-installed
LLVM, the build process would not honor the LLVM_ENABLE_ASSERTIONS
setting LLVM was compiled with, but effectively assume that it is
switched off when compiling. During unit-tests llvm-lit would still
query the LLVM_ENABLE_ASSERTIONS flag and enable tests which require
assertions. Even if enabled for LLVM, Polly does not output its debug
info and statistics in this this mode such that 7 tests fail.
To fix, we query llvm-config --assertion-mode and if on, enable
assertions as HandleLLVMOptions.cmake would do.
We cannot reliably use HandleLLVMOptions.cmake itself as the host's
LLVM build might have been built using automake and distributions
change file locations (e.g. Debian to
/usr/share/llvm-${VERSION}/cmake/HandleLLVMOptions.cmake).
llvm-svn: 247470
Michael Kruse