Summary:
The code that handles ISD:Register and ISD::CopyFromReg assumes
the target is amdgcn, so this is broken on r600. We don't
need this analysis on r600 anyway so we can safely move
it to SITargetLowering.
Reviewers: alex-t, arsenm, nhaehnle
Reviewed By: arsenm
Subscribers: msearles, kzhuravl, wdng, yaxunl, dstuttard, tpr, t-tye, llvm-commits
Differential Revision: https://reviews.llvm.org/D46298
llvm-svn: 334607
Summary:
They've been deprecated in favor of UADDO/ADDCARRY or USUBO/SUBCARRY for a while.
Target that uses these opcodes are changed in order to ensure their behavior doesn't change.
Reviewers: efriedma, craig.topper, dblaikie, bkramer
Subscribers: jholewinski, arsenm, jyknight, sdardis, nemanjai, nhaehnle, kbarton, fedor.sergeev, asb, rbar, johnrusso, simoncook, jordy.potman.lists, apazos, sabuasal, niosHD, jrtc27, zzheng, edward-jones, mgrang, atanasyan, llvm-commits
Differential Revision: https://reviews.llvm.org/D47422
llvm-svn: 333748
This usually results in better code. Fixes using
inline asm with short2, and also fixes having a different
ABI for function parameters between VI and gfx9.
Partially cleans up the mess used for lowering of the d16
operations. Making v4f16 legal will help clean this up more,
but this requires additional work.
llvm-svn: 332953
Summary:
MCTargetDesc/AMDGPUMCTargetDesc.h contains enums for all the instuction
and register defintions, which are huge so we only want to include
them where needed.
This will also make it easier if we want to split the R600 and GCN
definitions into separate tablegenerated files.
I was unable to remove AMDGPUMCTargetDesc.h from SIMachineFunctionInfo.h
because it uses some enums from the header to initialize default values
for the SIMachineFunction class, so I ended up having to remove includes of
SIMachineFunctionInfo.h from headers too.
Reviewers: arsenm, nhaehnle
Reviewed By: nhaehnle
Subscribers: MatzeB, kzhuravl, wdng, yaxunl, dstuttard, tpr, t-tye, javed.absar, llvm-commits
Differential Revision: https://reviews.llvm.org/D46272
llvm-svn: 332930
If a multiply is truncated, SimplifyDemandedBits
sometimes turns a zero_extend of the inputs into an
any_extend, which makes the known bits computation unhelpful.
Ignore these and compute known bits for the underlying value,
since we insert the correct extend type after.
llvm-svn: 331919
This is an extension of an existing combine to reduce wider
shls if the result fits in the final result type. This
introduces the same combine, but reduces the shift to a middle
sized type to avoid the slow 64-bit shift.
llvm-svn: 331916
If the truncate is only accessing the first element of the vector,
we can use the original source value.
This helps with some combine ordering issues after operations are
lowered to integer operations between bitcasts of build_vector.
In particular it stops unnecessarily materializing the unused
top half of a vector in some cases.
llvm-svn: 331909
We've been running doxygen with the autobrief option for a couple of
years now. This makes the \brief markers into our comments
redundant. Since they are a visual distraction and we don't want to
encourage more \brief markers in new code either, this patch removes
them all.
Patch produced by
for i in $(git grep -l '\\brief'); do perl -pi -e 's/\\brief //g' $i & done
Differential Revision: https://reviews.llvm.org/D46290
llvm-svn: 331272
Summary:
A change to use divergence analysis in the AMDGPU backend was getting formal
arguments incorrect (not tagged as divergent) unless they were VGPR0, VGPR1 or
VGPR2
For graphics shaders it is possible to have more than these passed in as VGPR
Modified the checking code to check for any VGPR registers passed in as formal
arguments.
Also, some intrinsics that are sources of divergence may have been lowered
during instruction selection and are missed on subsequent calls to
isSDNodeSourceOfDivergence - added the relevant AMDGPUISD checks as well.
Finally, the FunctionLoweringInfo tracks virtual registers that are live across
basic block boundaries. This is used to check for divergence of CopyFromRegister
registers using the DivergenceAnalysis analysis. For multiple blocks the lazily
evaluated inverted map VirtReg2Value was not cleared when the ValueMap map was.
Subscribers: arsenm, kzhuravl, wdng, nhaehnle, yaxunl, tpr, t-tye, llvm-commits
Differential Revision: https://reviews.llvm.org/D45372
Change-Id: I112f3bd6dfe0f62e63ce9b43b893982778e4bee3
llvm-svn: 330257
Summary:
This patch implements d16 support for image load, image store and image sample intrinsics.
Reviewers:
Matt, Brian.
Differential Revision:
https://reviews.llvm.org/D3991
llvm-svn: 322903
The object can't straddle the address space
wrap around, so I think it's OK to assume any
offsets added to the base object pointer can't
overflow. Similar logic already appears to be
applied in SelectionDAGBuilder when lowering
aggregate returns.
llvm-svn: 319272
AMDGPU backend errors with "unsupported call to function" upon
encountering a call to llvm.log{,10}.{f16,f32} intrinsics. This patch
adds custom lowering to avoid that error on both R600 and SI.
Reviewers: arsenm, jvesely
Subscribers: tstellar
Differential Revision: https://reviews.llvm.org/D29942
llvm-svn: 319025
This combine was already done in two places. The
generic combiner already has done this since
r217610, for adds (with a single use).
This one was added in r303641, and added support for handling
or as well. r313251 later added support to the generic
combine for or. It also turns out the isOrEquivalentToAdd
check is not necessary for this combine.
Additionally, we already reproduce this combine in yet
another place in the backend, although in that version
multiple uses of the add are still folded if it will
allow a fold into the addressing mode. That version needs
to be improved to understand ors though, as well as the
correct legal offsets for private.
llvm-svn: 317526
Old expansion was 20 VGPRs, 78 SGPRs and ~380 instructions.
This expansion is 11 VGPRs, 12 SGPRs and ~120 instructions.
Passes OpenCL conformance test_integer_ops quick_[u]long_math
Differential Revision: https://reviews.llvm.org/D38607
llvm-svn: 315081
Summary:
This commit adds comments on how the AMDPAL OS type overloads the
existing AMDGPU_ calling conventions used by Mesa, and adds a couple of
new ones.
Reviewers: arsenm, nhaehnle, dstuttard
Subscribers: mehdi_amini, kzhuravl, wdng, yaxunl, t-tye, llvm-commits
Differential Revision: https://reviews.llvm.org/D37752
llvm-svn: 314502
build_vector is a more useful canonical form when
pattern matching packed operations, so turn shift
into high element into a build_vector.
Should show no change for now.
llvm-svn: 312282
Includes a hack to fix the type selected for
the GlobalAddress of the function, which will be
fixed by changing the default datalayout to use
generic pointers for 0.
llvm-svn: 309732
The type needs to be casted back to the original argument type.
Fixes an assert that for some reason is only run when
using -debug.
Includes an additional combine to avoid test regressions
from having conversions mixed with multiple Assert[SZ]ext
nodes. On subtargets where i16 is legal, this was producing an i32
register with an i16 AssertZExt, truncated to i16 with another i8
AssertZExt.
t2: i32,ch = CopyFromReg t0, Register:i32 %vreg0
t3: i16 = truncate t2
t5: i16 = AssertZext t3, ValueType:ch:i8
t6: i8 = truncate t5
t7: i32 = zero_extend t6
llvm-svn: 308082
Intrinsic already existed for llvm.SI.tbuffer.store
Needed tbuffer.load and also re-implementing the intrinsic as llvm.amdgcn.tbuffer.*
Added CodeGen tests for the 2 new variants added.
Left the original llvm.SI.tbuffer.store implementation to avoid issues with existing code
Subscribers: arsenm, kzhuravl, wdng, nhaehnle, yaxunl, tony-tye, tpr
Differential Revision: https://reviews.llvm.org/D30687
llvm-svn: 306031
I did this a long time ago with a janky python script, but now
clang-format has built-in support for this. I fed clang-format every
line with a #include and let it re-sort things according to the precise
LLVM rules for include ordering baked into clang-format these days.
I've reverted a number of files where the results of sorting includes
isn't healthy. Either places where we have legacy code relying on
particular include ordering (where possible, I'll fix these separately)
or where we have particular formatting around #include lines that
I didn't want to disturb in this patch.
This patch is *entirely* mechanical. If you get merge conflicts or
anything, just ignore the changes in this patch and run clang-format
over your #include lines in the files.
Sorry for any noise here, but it is important to keep these things
stable. I was seeing an increasing number of patches with irrelevant
re-ordering of #include lines because clang-format was used. This patch
at least isolates that churn, makes it easy to skip when resolving
conflicts, and gets us to a clean baseline (again).
llvm-svn: 304787
Perform DAG combine:
and (srl x, c), mask => shl (bfe x, nb + c, mask >> nb), nb
Where nb is a number of trailing zeroes in mask.
It replaces two instructions with two and BFE is generally a more
expensive one. However this is only done if we are selecting a byte
or word at an aligned boundary which results in a proper SDWA
operand pattern. It is only done if SDWA is supported.
TODO: improve SDWA pass to actually convert this pattern. It is not
done now because we have an immediate in the instruction, which has
be moved into a VGPR.
Differential Revision: https://reviews.llvm.org/D33455
llvm-svn: 303681
shl (or|add x, c2), c1 => or|add (shl x, c1), (c2 << c1)
This allows to fold a constant into an address in some cases as
well as to eliminate second shift if the expression is used as
an address and second shift is a result of a GEP.
Differential Revision: https://reviews.llvm.org/D33432
llvm-svn: 303641
Turn expensive 64 bit shift into 32 bit if shift does not overflow int:
shl (ext x) => zext (shl x)
Differential Revision: https://reviews.llvm.org/D33367
llvm-svn: 303569
Partially implement callee-side for arguments and return values.
byval doesn't work properly, and most likely sret or other on-stack
return values most as well.
llvm-svn: 303308
This patch adds min/max population count, leading/trailing zero/one bit counting methods.
The min methods return answers based on bits that are known without considering unknown bits. The max methods give answers taking into account the largest count that unknown bits could give.
Differential Revision: https://reviews.llvm.org/D32931
llvm-svn: 302925
This adds routines for reseting KnownBits to unknown, making the value all zeros or all ones. It also adds methods for querying if the value is zero, all ones or unknown.
Differential Revision: https://reviews.llvm.org/D32637
llvm-svn: 302262
This patch replaces the separate APInts for KnownZero/KnownOne with a single KnownBits struct. This is similar to what was done to ValueTracking's version recently.
This is largely a mechanical transformation from KnownZero to Known.Zero.
Differential Revision: https://reviews.llvm.org/D32569
llvm-svn: 301620
Fixes traps in any block besides the entry block,
and fixes depending on a live-in physical register
by using a virtual register copy.
Also happens to stop emitting a nop in the case
debug trap is not supported.
llvm-svn: 301206
immediate operands.
This commit adds an AArch64 dag-combine that optimizes code generation
for logical instructions taking immediate operands. The optimization
uses demanded bits to change a logical instruction's immediate operand
so that the immediate can be folded into the immediate field of the
instruction.
This recommits r300932 and r300930, which was causing dag-combine to
loop forever. The problem was that optimizeLogicalImm was returning
true even when there was no change to the immediate node (which happened
when the immediate was all zeros or ones), which caused dag-combine to
push and pop the same node to the work list over and over again without
making any progress.
This commit fixes the bug by returning false early in optimizeLogicalImm
if the immediate is all zeros or ones. Also, it changes the code to
compare the immediate with 0 or Mask rather than calling
countPopulation.
rdar://problem/18231627
Differential Revision: https://reviews.llvm.org/D5591
llvm-svn: 301019
It seems that r300930 was creating an infinite loop in dag-combine when
compling the following file:
MultiSource/Benchmarks/MiBench/consumer-typeset/z21.c
llvm-svn: 300940
immediate operands.
This commit adds an AArch64 dag-combine that optimizes code generation
for logical instructions taking immediate operands. The optimization
uses demanded bits to change a logical instruction's immediate operand
so that the immediate can be folded into the immediate field of the
instruction.
This recommits r300913, which broke bots because I didn't fix a call to
ShrinkDemandedConstant in SIISelLowering.cpp after changing the APIs of
TargetLoweringOpt and TargetLowering.
rdar://problem/18231627
Differential Revision: https://reviews.llvm.org/D5591
llvm-svn: 300930
immediate operands.
This commit adds an AArch64 dag-combine that optimizes code generation
for logical instructions taking immediate operands. The optimization
uses demanded bits to change a logical instruction's immediate operand
so that the immediate can be folded into the immediate field of the
instruction.
rdar://problem/18231627
Differential Revision: https://reviews.llvm.org/D5591
llvm-svn: 300913
Add a new node to act as a fancy bitcast from f16 operations to
i32 that implicitly zero the high 16-bits of the result.
Alternatively could try making v2f16 legal and canonicalizing
on build_vectors.
llvm-svn: 299246
Currently ComputeNumSignBits returns the minimum number of sign bits for all elements of vector data, when we may only be interested in one/some of the elements.
This patch adds a DemandedElts argument that allows us to specify the elements we actually care about. The original ComputeNumSignBits implementation calls with a DemandedElts demanding all elements to match current behaviour. Scalar types set this to 1.
I've only added support for BUILD_VECTOR and EXTRACT_VECTOR_ELT so far, all others will default to demanding all elements but can be updated in due course.
Followup to D25691.
Differential Revision: https://reviews.llvm.org/D31311
llvm-svn: 299219
Follow up to D25691, this sets up the plumbing necessary to support vector demanded elements support in known bits calculations in target nodes.
Differential Revision: https://reviews.llvm.org/D31249
llvm-svn: 299201
As we introduced target triple environment amdgiz and amdgizcl, the address
space values are no longer enums. We have to decide the value by target triple.
The basic idea is to use struct AMDGPUAS to represent address space values.
For address space values which are not depend on target triple, use static
const members, so that they don't occupy extra memory space and is equivalent
to a compile time constant.
Since the struct is lightweight and cheap, it can be created on the fly at
the point of usage. Or it can be added as member to a pass and created at
the beginning of the run* function.
Differential Revision: https://reviews.llvm.org/D31284
llvm-svn: 298846
This is used for a specific type of return to a shader part's
epilog code. Rename to try avoiding confusion from a true
call's return.
llvm-svn: 298452
Move backend internal intrinsics along with the rest of the
normal intrinsics, and use the Intrinsic::getDeclaration
API instead of manually constructing the type list.
It's surprising this was working before. fdiv.fast had
the wrong number of parameters. The control flow intrinsic
declaration attributes were not being applied, and
their types were inconsistent. The actual IR use types
did not match the declaration, and were closer to the
types used for the patterns. The brcond lowering
was changing the types, so introduce new nodes for those.
llvm-svn: 298119
computeKnownBits didn't handle fp_to_fp16 to report
the high bits as 0. ARM maps the generic node to an instruction
that does not modify the high bits of the register, so introduce
a target node where the high bits are known 0.
llvm-svn: 297873
Change implementation to use max instead of add.
min/max/med3 do not flush denormals regardless of the mode,
so it is OK to use it whether or not they are enabled.
Also allow using clamp with f16, and use knowledge
of dx10_clamp.
llvm-svn: 295788
Recommiting after fixing X86 inc/dec chain bug.
* Simplify Consecutive Merge Store Candidate Search
Now that address aliasing is much less conservative, push through
simplified store merging search and chain alias analysis which only
checks for parallel stores through the chain subgraph. This is cleaner
as the separation of non-interfering loads/stores from the
store-merging logic.
When merging stores search up the chain through a single load, and
finds all possible stores by looking down from through a load and a
TokenFactor to all stores visited.
This improves the quality of the output SelectionDAG and the output
Codegen (save perhaps for some ARM cases where we correctly constructs
wider loads, but then promotes them to float operations which appear
but requires more expensive constant generation).
Some minor peephole optimizations to deal with improved SubDAG shapes (listed below)
Additional Minor Changes:
1. Finishes removing unused AliasLoad code
2. Unifies the chain aggregation in the merged stores across code
paths
3. Re-add the Store node to the worklist after calling
SimplifyDemandedBits.
4. Increase GatherAllAliasesMaxDepth from 6 to 18. That number is
arbitrary, but seems sufficient to not cause regressions in
tests.
5. Remove Chain dependencies of Memory operations on CopyfromReg
nodes as these are captured by data dependence
6. Forward loads-store values through tokenfactors containing
{CopyToReg,CopyFromReg} Values.
7. Peephole to convert buildvector of extract_vector_elt to
extract_subvector if possible (see
CodeGen/AArch64/store-merge.ll)
8. Store merging for the ARM target is restricted to 32-bit as
some in some contexts invalid 64-bit operations are being
generated. This can be removed once appropriate checks are
added.
This finishes the change Matt Arsenault started in r246307 and
jyknight's original patch.
Many tests required some changes as memory operations are now
reorderable, improving load-store forwarding. One test in
particular is worth noting:
CodeGen/PowerPC/ppc64-align-long-double.ll - Improved load-store
forwarding converts a load-store pair into a parallel store and
a memory-realized bitcast of the same value. However, because we
lose the sharing of the explicit and implicit store values we
must create another local store. A similar transformation
happens before SelectionDAG as well.
Reviewers: arsenm, hfinkel, tstellarAMD, jyknight, nhaehnle
llvm-svn: 293893
The operand types were defined to fit the fp16_to_fp node, which
has the half as an integer type. v_cvt_f32_f16 does support
source modifiers, so change this to have an FP type and modifiers.
For targets without legal f16, this requires recognizing the
bit operations and trying to produce them.
llvm-svn: 293857
We had various variants of defining dump() functions in LLVM. Normalize
them (this should just consistently implement the things discussed in
http://lists.llvm.org/pipermail/cfe-dev/2014-January/034323.html
For reference:
- Public headers should just declare the dump() method but not use
LLVM_DUMP_METHOD or #if !defined(NDEBUG) || defined(LLVM_ENABLE_DUMP)
- The definition of a dump method should look like this:
#if !defined(NDEBUG) || defined(LLVM_ENABLE_DUMP)
LLVM_DUMP_METHOD void MyClass::dump() {
// print stuff to dbgs()...
}
#endif
llvm-svn: 293359
* Simplify Consecutive Merge Store Candidate Search
Now that address aliasing is much less conservative, push through
simplified store merging search and chain alias analysis which only
checks for parallel stores through the chain subgraph. This is cleaner
as the separation of non-interfering loads/stores from the
store-merging logic.
When merging stores search up the chain through a single load, and
finds all possible stores by looking down from through a load and a
TokenFactor to all stores visited.
This improves the quality of the output SelectionDAG and the output
Codegen (save perhaps for some ARM cases where we correctly constructs
wider loads, but then promotes them to float operations which appear
but requires more expensive constant generation).
Some minor peephole optimizations to deal with improved SubDAG shapes (listed below)
Additional Minor Changes:
1. Finishes removing unused AliasLoad code
2. Unifies the chain aggregation in the merged stores across code
paths
3. Re-add the Store node to the worklist after calling
SimplifyDemandedBits.
4. Increase GatherAllAliasesMaxDepth from 6 to 18. That number is
arbitrary, but seems sufficient to not cause regressions in
tests.
5. Remove Chain dependencies of Memory operations on CopyfromReg
nodes as these are captured by data dependence
6. Forward loads-store values through tokenfactors containing
{CopyToReg,CopyFromReg} Values.
7. Peephole to convert buildvector of extract_vector_elt to
extract_subvector if possible (see
CodeGen/AArch64/store-merge.ll)
8. Store merging for the ARM target is restricted to 32-bit as
some in some contexts invalid 64-bit operations are being
generated. This can be removed once appropriate checks are
added.
This finishes the change Matt Arsenault started in r246307 and
jyknight's original patch.
Many tests required some changes as memory operations are now
reorderable, improving load-store forwarding. One test in
particular is worth noting:
CodeGen/PowerPC/ppc64-align-long-double.ll - Improved load-store
forwarding converts a load-store pair into a parallel store and
a memory-realized bitcast of the same value. However, because we
lose the sharing of the explicit and implicit store values we
must create another local store. A similar transformation
happens before SelectionDAG as well.
Reviewers: arsenm, hfinkel, tstellarAMD, jyknight, nhaehnle
llvm-svn: 293184
For -(x + y) -> (-x) + (-y), if x == -y, this would
change the result from -0.0 to 0.0. Since the fma/fmad
combine is an extension of this problem it also
applies there.
fmul should be fine, and I don't think any of the unary
operators or conversions should be a problem either.
llvm-svn: 292473
Canonicalize a select with a constant to the false side. This
enables more instruction shrinking opportunities since an
inline immediate can be used for the false side of v_cndmask_b32_e32.
This seems to usually be better but causes some code size regressions
in some tests.
llvm-svn: 290372
Retrying after fixing after removing load-store factoring through
token factors in favor of improved token factor operand pruning
Simplify Consecutive Merge Store Candidate Search
Now that address aliasing is much less conservative, push through
simplified store merging search which only checks for parallel stores
through the chain subgraph. This is cleaner as the separation of
non-interfering loads/stores from the store-merging logic.
Whem merging stores, search up the chain through a single load, and
finds all possible stores by looking down from through a load and a
TokenFactor to all stores visited. This improves the quality of the
output SelectionDAG and generally the output CodeGen (with some
exceptions).
Additional Minor Changes:
1. Finishes removing unused AliasLoad code
2. Unifies the the chain aggregation in the merged stores across
code paths
3. Re-add the Store node to the worklist after calling
SimplifyDemandedBits.
4. Increase GatherAllAliasesMaxDepth from 6 to 18. That number is
arbitrary, but seemed sufficient to not cause regressions in
tests.
This finishes the change Matt Arsenault started in r246307 and
jyknight's original patch.
Many tests required some changes as memory operations are now
reorderable. Some tests relying on the order were changed to use
volatile memory operations
Noteworthy tests:
CodeGen/AArch64/argument-blocks.ll -
It's not entirely clear what the test_varargs_stackalign test is
supposed to be asserting, but the new code looks right.
CodeGen/AArch64/arm64-memset-inline.lli -
CodeGen/AArch64/arm64-stur.ll -
CodeGen/ARM/memset-inline.ll -
The backend now generates *worse* code due to store merging
succeeding, as we do do a 16-byte constant-zero store efficiently.
CodeGen/AArch64/merge-store.ll -
Improved, but there still seems to be an extraneous vector insert
from an element to itself?
CodeGen/PowerPC/ppc64-align-long-double.ll -
Worse code emitted in this case, due to the improved store->load
forwarding.
CodeGen/X86/dag-merge-fast-accesses.ll -
CodeGen/X86/MergeConsecutiveStores.ll -
CodeGen/X86/stores-merging.ll -
CodeGen/Mips/load-store-left-right.ll -
Restored correct merging of non-aligned stores
CodeGen/AMDGPU/promote-alloca-stored-pointer-value.ll -
Improved. Correctly merges buffer_store_dword calls
CodeGen/AMDGPU/si-triv-disjoint-mem-access.ll -
Improved. Sidesteps loading a stored value and
merges two stores
CodeGen/X86/pr18023.ll -
This test has been removed, as it was asserting incorrect
behavior. Non-volatile stores *CAN* be moved past volatile loads,
and now are.
CodeGen/X86/vector-idiv.ll -
CodeGen/X86/vector-lzcnt-128.ll -
It's basically impossible to tell what these tests are actually
testing. But, looks like the code got better due to the memory
operations being recognized as non-aliasing.
CodeGen/X86/win32-eh.ll -
Both loads of the securitycookie are now merged.
Reviewers: arsenm, hfinkel, tstellarAMD, jyknight, nhaehnle
Subscribers: wdng, nhaehnle, nemanjai, arsenm, weimingz, niravd, RKSimon, aemerson, qcolombet, dsanders, resistor, tstellarAMD, t.p.northover, spatel
Differential Revision: https://reviews.llvm.org/D14834
llvm-svn: 289659
At least the plugin used by the LibreOffice build
(<https://wiki.documentfoundation.org/Development/Clang_plugins>) indirectly
uses those members (through inline functions in LLVM/Clang include files in turn
using them), but they are not exported by utils/extract_symbols.py on Windows,
and accessing data across DLL/EXE boundaries on Windows is generally
problematic.
Differential Revision: https://reviews.llvm.org/D26671
llvm-svn: 289647
Retrying after fixing overly aggressive load-store forwarding optimization.
Simplify Consecutive Merge Store Candidate Search
Now that address aliasing is much less conservative, push through
simplified store merging search which only checks for parallel stores
through the chain subgraph. This is cleaner as the separation of
non-interfering loads/stores from the store-merging logic.
Whem merging stores, search up the chain through a single load, and
finds all possible stores by looking down from through a load and a
TokenFactor to all stores visited. This improves the quality of the
output SelectionDAG and generally the output CodeGen (with some
exceptions).
Additional Minor Changes:
1. Finishes removing unused AliasLoad code
2. Unifies the the chain aggregation in the merged stores across
code paths
3. Re-add the Store node to the worklist after calling
SimplifyDemandedBits.
4. Increase GatherAllAliasesMaxDepth from 6 to 18. That number is
arbitrary, but seemed sufficient to not cause regressions in
tests.
This finishes the change Matt Arsenault started in r246307 and
jyknight's original patch.
Many tests required some changes as memory operations are now
reorderable. Some tests relying on the order were changed to use
volatile memory operations
Noteworthy tests:
CodeGen/AArch64/argument-blocks.ll -
It's not entirely clear what the test_varargs_stackalign test is
supposed to be asserting, but the new code looks right.
CodeGen/AArch64/arm64-memset-inline.lli -
CodeGen/AArch64/arm64-stur.ll -
CodeGen/ARM/memset-inline.ll -
The backend now generates *worse* code due to store merging
succeeding, as we do do a 16-byte constant-zero store efficiently.
CodeGen/AArch64/merge-store.ll -
Improved, but there still seems to be an extraneous vector insert
from an element to itself?
CodeGen/PowerPC/ppc64-align-long-double.ll -
Worse code emitted in this case, due to the improved store->load
forwarding.
CodeGen/X86/dag-merge-fast-accesses.ll -
CodeGen/X86/MergeConsecutiveStores.ll -
CodeGen/X86/stores-merging.ll -
CodeGen/Mips/load-store-left-right.ll -
Restored correct merging of non-aligned stores
CodeGen/AMDGPU/promote-alloca-stored-pointer-value.ll -
Improved. Correctly merges buffer_store_dword calls
CodeGen/AMDGPU/si-triv-disjoint-mem-access.ll -
Improved. Sidesteps loading a stored value and
merges two stores
CodeGen/X86/pr18023.ll -
This test has been removed, as it was asserting incorrect
behavior. Non-volatile stores *CAN* be moved past volatile loads,
and now are.
CodeGen/X86/vector-idiv.ll -
CodeGen/X86/vector-lzcnt-128.ll -
It's basically impossible to tell what these tests are actually
testing. But, looks like the code got better due to the memory
operations being recognized as non-aliasing.
CodeGen/X86/win32-eh.ll -
Both loads of the securitycookie are now merged.
Reviewers: arsenm, hfinkel, tstellarAMD, jyknight, nhaehnle
Subscribers: wdng, nhaehnle, nemanjai, arsenm, weimingz, niravd, RKSimon, aemerson, qcolombet, dsanders, resistor, tstellarAMD, t.p.northover, spatel
Differential Revision: https://reviews.llvm.org/D14834
llvm-svn: 289221
Structure the definitions a bit more like the other classes.
The main change here is to split EXP with the done bit set
to a separate opcode, so we can set mayLoad = 1 so that it won't
be reordered before the other exp stores, since this has the special
constraint that if the done bit is set then this should be the last
exp in she shader.
Previously all exp instructions were inferred to have unmodeled
side effects.
llvm-svn: 288695
Codegen prepare sinks comparisons close to a user is we have only one register
for conditions. For AMDGPU we have many SGPRs capable to hold vector conditions.
Changed BE to report we have many condition registers. That way IR LICM pass
would hoist an invariant comparison out of a loop and codegen prepare will not
sink it.
With that done a condition is calculated in one block and used in another.
Current behavior is to store workitem's condition in a VGPR using v_cndmask_b32
and then restore it with yet another v_cmp instruction from that v_cndmask's
result. To mitigate the issue a propagation of source SGPR pair in place of v_cmp
is implemented. Additional side effect of this is that we may consume less VGPRs
at a cost of more SGPRs in case if holding of multiple conditions is needed, and
that is a clear win in most cases.
Differential Revision: https://reviews.llvm.org/D26114
llvm-svn: 288053
The generic infrastructure to compute the Newton series for reciprocal and
reciprocal square root was conceived to allow a target to compute the series
itself. However, the original code did not properly consider this condition
if returned by a target. This patch addresses the issues to allow a target
to compute the series on its own.
Differential revision: https://reviews.llvm.org/D22975
llvm-svn: 286523
Codegen prepare sinks comparisons close to a user is we have only one register
for conditions. For AMDGPU we have many SGPRs capable to hold vector conditions.
Changed BE to report we have many condition registers. That way IR LICM pass
would hoist an invariant comparison out of a loop and codegen prepare will not
sink it.
With that done a condition is calculated in one block and used in another.
Current behavior is to store workitem's condition in a VGPR using v_cndmask
and then restore it with yet another v_cmp instruction from that v_cndmask's
result. To mitigate the issue a forward propagation of a v_cmp 64 bit result
to an user is implemented. Additional side effect of this is that we may
consume less VGPRs in a cost of more SGPRs in case if holding of multiple
conditions is needed, and that is a clear win in most cases.
llvm-svn: 286171
This will prevent following regression when enabling i16 support (D18049):
test/CodeGen/AMDGPU/ctlz.ll
test/CodeGen/AMDGPU/ctlz_zero_undef.ll
Differential Revision: https://reviews.llvm.org/D25802
llvm-svn: 285716
I wanted to implement this as a target independent expansion, however when
targets say they want to expand FP_TO_FP16 what they actually want is
the unsafe math expansion when possible and expansion to a libcall in all
other cases.
The only way to make this work as a target independent would be to add logic
to target's TargetLowering construction to mark theses nodes as Expand when
LegalizeDAG can use the unsafe expansion and mark them as LibCall when it
cannot. I think this would be possible, but I think it would be too fragile
and complex as it would require targets to keep their expansion logic up
to date with the code in LegalizeDAG.
Reviewers: bogner, ab, t.p.northover, arsenm
Subscribers: wdng, llvm-commits, nhaehnle
Differential Revision: https://reviews.llvm.org/D25999
llvm-svn: 285704
This is a retry of r284495 which was reverted at r284513 due to use-after-scope bugs
caused by faulty usage of StringRef.
This version also renames a pair of functions:
getRecipEstimateDivEnabled()
getRecipEstimateSqrtEnabled()
as suggested by Eric Christopher.
original commit msg:
[Target] remove TargetRecip class; move reciprocal estimate isel functionality to TargetLowering
This is a follow-up to https://reviews.llvm.org/D24816 - where we changed reciprocal estimates to be function attributes
rather than TargetOptions.
This patch is intended to be a structural, but not functional change. By moving all of the
TargetRecip functionality into TargetLowering, we can remove all of the reciprocal estimate
state, shield the callers from the string format implementation, and simplify/localize the
logic needed for a target to enable this.
If a function has a "reciprocal-estimates" attribute, those settings may override the target's
default reciprocal preferences for whatever operation and data type we're trying to optimize.
If there's no attribute string or specific setting for the op/type pair, just use the target
default settings.
As noted earlier, a better solution would be to move the reciprocal estimate settings to IR
instructions and SDNodes rather than function attributes, but that's a multi-step job that
requires infrastructure improvements. I intend to work on that, but it's not clear how long
it will take to get all the pieces in place.
Differential Revision: https://reviews.llvm.org/D25440
llvm-svn: 284746
This is a follow-up to D24816 - where we changed reciprocal estimates to be function attributes
rather than TargetOptions.
This patch is intended to be a structural, but not functional change. By moving all of the
TargetRecip functionality into TargetLowering, we can remove all of the reciprocal estimate
state, shield the callers from the string format implementation, and simplify/localize the
logic needed for a target to enable this.
If a function has a "reciprocal-estimates" attribute, those settings may override the target's
default reciprocal preferences for whatever operation and data type we're trying to optimize.
If there's no attribute string or specific setting for the op/type pair, just use the target
default settings.
As noted earlier, a better solution would be to move the reciprocal estimate settings to IR
instructions and SDNodes rather than function attributes, but that's a multi-step job that
requires infrastructure improvements. I intend to work on that, but it's not clear how long
it will take to get all the pieces in place.
Differential Revision: https://reviews.llvm.org/D25440
llvm-svn: 284495
Summary:
We are using this helper for our 24-bit arithmetic combines, so we are now able to eliminate multi-use operations that mask the high-bits of 24-bit inputs (e.g. and x, 0xffffff)
Reviewers: arsenm, nhaehnle
Subscribers: tony-tye, arsenm, kzhuravl, wdng, nhaehnle, llvm-commits, yaxunl
Differential Revision: https://reviews.llvm.org/D24672
llvm-svn: 284267
Retrying after upstream changes.
Simplify Consecutive Merge Store Candidate Search
Now that address aliasing is much less conservative, push through
simplified store merging search which only checks for parallel stores
through the chain subgraph. This is cleaner as the separation of
non-interfering loads/stores from the store-merging logic.
Whem merging stores, search up the chain through a single load, and
finds all possible stores by looking down from through a load and a
TokenFactor to all stores visited. This improves the quality of the
output SelectionDAG and generally the output CodeGen (with some
exceptions).
Additional Minor Changes:
1. Finishes removing unused AliasLoad code
2. Unifies the the chain aggregation in the merged stores across
code paths
3. Re-add the Store node to the worklist after calling
SimplifyDemandedBits.
4. Increase GatherAllAliasesMaxDepth from 6 to 18. That number is
arbitrary, but seemed sufficient to not cause regressions in
tests.
This finishes the change Matt Arsenault started in r246307 and
jyknight's original patch.
Many tests required some changes as memory operations are now
reorderable. Some tests relying on the order were changed to use
volatile memory operations
Noteworthy tests:
CodeGen/AArch64/argument-blocks.ll -
It's not entirely clear what the test_varargs_stackalign test is
supposed to be asserting, but the new code looks right.
CodeGen/AArch64/arm64-memset-inline.lli -
CodeGen/AArch64/arm64-stur.ll -
CodeGen/ARM/memset-inline.ll -
The backend now generates *worse* code due to store merging
succeeding, as we do do a 16-byte constant-zero store efficiently.
CodeGen/AArch64/merge-store.ll -
Improved, but there still seems to be an extraneous vector insert
from an element to itself?
CodeGen/PowerPC/ppc64-align-long-double.ll -
Worse code emitted in this case, due to the improved store->load
forwarding.
CodeGen/X86/dag-merge-fast-accesses.ll -
CodeGen/X86/MergeConsecutiveStores.ll -
CodeGen/X86/stores-merging.ll -
CodeGen/Mips/load-store-left-right.ll -
Restored correct merging of non-aligned stores
CodeGen/AMDGPU/promote-alloca-stored-pointer-value.ll -
Improved. Correctly merges buffer_store_dword calls
CodeGen/AMDGPU/si-triv-disjoint-mem-access.ll -
Improved. Sidesteps loading a stored value and
merges two stores
CodeGen/X86/pr18023.ll -
This test has been removed, as it was asserting incorrect
behavior. Non-volatile stores *CAN* be moved past volatile loads,
and now are.
CodeGen/X86/vector-idiv.ll -
CodeGen/X86/vector-lzcnt-128.ll -
It's basically impossible to tell what these tests are actually
testing. But, looks like the code got better due to the memory
operations being recognized as non-aliasing.
CodeGen/X86/win32-eh.ll -
Both loads of the securitycookie are now merged.
CodeGen/AMDGPU/vgpr-spill-emergency-stack-slot-compute.ll -
This test appears to work but no longer exhibits the spill behavior.
Reviewers: arsenm, hfinkel, tstellarAMD, jyknight, nhaehnle
Subscribers: wdng, nhaehnle, nemanjai, arsenm, weimingz, niravd, RKSimon, aemerson, qcolombet, dsanders, resistor, tstellarAMD, t.p.northover, spatel
Differential Revision: https://reviews.llvm.org/D14834
llvm-svn: 284151
Tom Stellard