Summary:
Previously, we would check whether the target is supported or not, only in
fastSelectInstruction(). This means that 64-bit targets could use FastISel too.
We fix this by checking every overridden method of the FastISel class and
by falling back to SelectionDAG if the target isn't supported. This change
should have been committed along with r243638, but somehow I missed it.
Reviewers: dsanders
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D11755
llvm-svn: 243986
Summary:
Previously, we would sign-extend non-boolean negative constants and
zero-extend otherwise. This was problematic for PHI instructions with
negative values that had a type with bitwidth less than that of the
register used for materialization.
More specifically, ComputePHILiveOutRegInfo() assumes the constants
present in a PHI node are zero extended in their container and
afterwards deduces the known bits.
For example, previously we would materialize an i16 -4 with the
following instruction:
addiu $r, $zero, -4
The register would end-up with the 32-bit 2's complement representation
of -4. However, ComputePHILiveOutRegInfo() would generate a constant
with the upper 16-bits set to zero. The SelectionDAG builder would use
that information to generate an AssertZero node that would remove any
subsequent trunc & zero_extend nodes.
In theory, we should modify ComputePHILiveOutRegInfo() to consult
target-specific hooks about the way they prefer to materialize the
given constants. However, git-blame reports that this specific code
has not been touched since 2011 and it seems to be working well for every
target so far.
Reviewers: dsanders
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D11592
llvm-svn: 243636
Summary:
Currently, we support only the MIPS O32 ABI calling convention for call
lowering. With this change we avoid using the O32 calling convetion for
lowering calls marked as using the fast calling convention.
Reviewers: dsanders
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D11515
llvm-svn: 243485
Summary:
Generate correct code for the select instruction by zero-extending
it's boolean/condition operand to GPR-width. This is necessary because
the conditional-move instructions operate on the whole register.
Reviewers: dsanders
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D11506
llvm-svn: 243469
Summary:
This change is part of a series of commits dedicated to have a single
DataLayout during compilation by using always the one owned by the
module.
Reviewers: echristo
Subscribers: jholewinski, ted, yaron.keren, rafael, llvm-commits
Differential Revision: http://reviews.llvm.org/D11028
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 241775
Summary:
Avoid using the TargetMachine owned DataLayout and use the Module owned
one instead. This requires passing the DataLayout up the stack to
ComputeValueVTs().
This change is part of a series of commits dedicated to have a single
DataLayout during compilation by using always the one owned by the
module.
Reviewers: echristo
Subscribers: jholewinski, yaron.keren, rafael, llvm-commits
Differential Revision: http://reviews.llvm.org/D11019
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 241773
The summary is that it moves the mangling earlier and replaces a few
calls to .addExternalSymbol with addSym.
I originally wanted to replace all the uses of addExternalSymbol with
addSym, but noticed it was a lot of work and doesn't need to be done
all at once.
llvm-svn: 240395
Summary: Implement bswap intrinsic for MIPS FastISel. It's very different for misp32 r1/r2 .
Based on a patch by Reed Kotler.
Test Plan:
bswap1.ll
test-suite
Reviewers: dsanders, rkotler
Subscribers: llvm-commits, rfuhler
Differential Revision: http://reviews.llvm.org/D7219
llvm-svn: 238760
Summary:
Implement the intrinsics memset, memcopy and memmove in MIPS FastISel.
Make some needed infrastructure fixes so that this can work.
Based on a patch by Reed Kotler.
Test Plan:
memtest1.ll
The patch passes test-suite for mips32 r1/r2 and at O0/O2
Reviewers: rkotler, dsanders
Subscribers: llvm-commits, rfuhler
Differential Revision: http://reviews.llvm.org/D7158
llvm-svn: 238759
Summary: Implement the LLVM assembly urem/srem and sdiv/udiv instructions in MIPS FastISel.
Based on a patch by Reed Kotler.
Test Plan:
srem1.ll
div1.ll
test-suite at O0/O2 for mips32 r1/r2
Reviewers: dsanders, rkotler
Subscribers: llvm-commits, rfuhler
Differential Revision: http://reviews.llvm.org/D7028
llvm-svn: 238757
Summary: Implement the LLVM IR select statement for MIPS FastISelsel.
Based on a patch by Reed Kotler.
Test Plan:
"Make check" test included now.
Passes test-suite at O2/O0 mips32 r1/r2.
Reviewers: dsanders, rkotler
Subscribers: llvm-commits, rfuhler
Differential Revision: http://reviews.llvm.org/D6774
llvm-svn: 238756
Summary:
The contents of the HI/LO registers are unpredictable after the execution of
the MUL instruction. In addition to implicitly defining these registers in the
MUL instruction definition, we have to mark those registers as dead too.
Without this the fast register allocator is running out of registers when the
MUL instruction is followed by another one that tries to allocate the AC0
register.
Based on a patch by Reed Kotler.
Reviewers: dsanders, rkotler
Subscribers: llvm-commits, rfuhler
Differential Revision: http://reviews.llvm.org/D9825
llvm-svn: 238755
The raw non-instruction/constant form of this is still relying on being
able to access the pointee type from a pointer type - those will be
cleaned up later. For now, just focus on the cases where the pointee
type is easily accessible.
llvm-svn: 237958
Summary: Allow calls with non legal integer types based on i8 and i16 to be processed by mips fast-isel.
Based on a patch by Reed Kotler.
Test Plan:
"Make check" test forthcoming.
Test-suite passes at O0/O2 and with mips32 r1/r2
Reviewers: rkotler, dsanders
Subscribers: llvm-commits, rfuhler
Differential Revision: http://reviews.llvm.org/D6770
llvm-svn: 237121
Summary:
Try to compute addresses when the offset from a memory location is a constant
expression.
Based on a patch by Reed Kotler.
Test Plan:
Passes test-suite for -O0/O2 and mips 32 r1/r2
Reviewers: rkotler, dsanders
Subscribers: llvm-commits, aemerson, rfuhler
Differential Revision: http://reviews.llvm.org/D6767
llvm-svn: 237117
This reapplies r235194, which was reverted in r235495 because it was causing a
failure in our out-of-tree buildbots for MIPS. With the sign-extension patch
in r235718, this patch doesn't cause any problem any more.
llvm-svn: 235878
Summary:
Perform integer extension only when the destination type is one of
i8, i16 & i32 and when the source type is i1, i8 or i16. For other
combinations we fall back to SelectionDAG.
This fixes the test MultiSource/Benchmarks/7zip that was failing in our
out-of-tree MIPS buildbots.
Reviewers: dsanders
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D9243
llvm-svn: 235718
Summary: Implement the method FastMaterializeAlloca in Mips fast-isel
Based on a patch by Reed Kotler.
Test Plan:
Passes test-suite at O0/O2 for mips32 r1/r2
fastalloca.ll
Reviewers: dsanders, rkotler
Subscribers: rfuhler, llvm-commits
Differential Revision: http://reviews.llvm.org/D6742
llvm-svn: 235213
Summary:
Add shift operators implementation to fast-isel for Mips. These are shift ops
for non legal forms, i.e. i8 and i16.
Based on a patch by Reed Kotler.
Test Plan:
Reviewers: dsanders
Subscribers: echristo, rfuhler, llvm-commits
Differential Revision: http://reviews.llvm.org/D6726
llvm-svn: 235194
Summary:
Code is mostly copied from AArch64 port and modified where needed for Mips.
This handles the "non" legal cases of logical ops. Legal cases are handled by tablegen patterns.
Test Plan:
Make check test logopm.ll
All of test-suite passes at O0/O2 and mips32 r1/r2 with this new change.
Reviewers: dsanders
Reviewed By: dsanders
Subscribers: echristo, llvm-commits, aemerson, rfuhler
Differential Revision: http://reviews.llvm.org/D6599
llvm-svn: 231665
Summary: Begin to add various address modes; including alloca.
Test Plan: Make sure there are no regressions in test-suite at O0/02 in mips32r1/r2
Reviewers: dsanders
Reviewed By: dsanders
Subscribers: echristo, rfuhler, llvm-commits
Differential Revision: http://reviews.llvm.org/D6426
llvm-svn: 230300
Summary:
Implement the bulk of returning values in Mips fast-isel
Test Plan:
reatabi.ll
Passes test-suite at -O0,-O2 and with mips32r2 and mips32r1.
Reviewers: dsanders
Reviewed By: dsanders
Subscribers: llvm-commits, aemerson, rfuhler
Differential Revision: http://reviews.llvm.org/D5920
llvm-svn: 228958
calls that don't take a Function argument from Mips. Notable
exceptions: the AsmPrinter and MipsTargetObjectFile. The
latter needs to be fixed, and the former will be fixed when the
general AsmPrinter changes happen.
llvm-svn: 227512
While the term "Target" is in the name, it doesn't really have to do
with the LLVM Target library -- this isn't an abstraction which LLVM
targets generally need to implement or extend. It has much more to do
with modeling the various runtime libraries on different OSes and with
different runtime environments. The "target" in this sense is the more
general sense of a target of cross compilation.
This is in preparation for porting this analysis to the new pass
manager.
No functionality changed, and updates inbound for Clang and Polly.
llvm-svn: 226078
utils/sort_includes.py.
I clearly haven't done this in a while, so more changed than usual. This
even uncovered a missing include from the InstrProf library that I've
added. No functionality changed here, just mechanical cleanup of the
include order.
llvm-svn: 225974
Summary:
This has most of what is needed for mips fast-isel call lowering for O32.
What is missing I will add on the next patch because this patch is already too large.
It should not be doing anything wrong but it will punt on some cases that it is basically
capable of doing.
The mechanism is there for parameters to be passed on the stack but I have not enabled it because it serves as a way for now to prevent some of the strange cases of O32 register passing that I have not fully checked yet and have some issues.
The Mips O32 abi rules are very complicated as far how data is passed in floating and integer registers.
However there is a way to think about this all very simply and this implementation reflects that.
Basically, the ABI rules are written as if everything is passed on the stack and aligned as such.
Once that is conceptually done, it is nearly trivial to reassign those locations to registers and
then all the complexity disappears.
So I have told tablegen that all the data is passed on the stack and during the lowering I fix
this by assigning to registers as per the ABI doc.
This has been my approach and you can line up what I did with the ABI document and see 1 to 1 what
is going on.
Test Plan: callabi.ll
Reviewers: dsanders
Reviewed By: dsanders
Subscribers: jholewinski, echristo, ahatanak, llvm-commits, rfuhler
Differential Revision: http://reviews.llvm.org/D5714
llvm-svn: 221948
Summary:
In order to facilitate use of common code, checking by reviewers of other fast-isel ports, and hopefully to eventually move most of Mips and other fast-isel ports into target independent code, I've tried to get the two implementations to line up.
There is no functional code change. Just methods moved in the file to be in the same order as in AArch64.
Test Plan: No functional change.
Reviewers: dsanders
Reviewed By: dsanders
Subscribers: llvm-commits, aemerson, rfuhler
Differential Revision: http://reviews.llvm.org/D5692
llvm-svn: 219703
Summary:
Make Mips fast-isel track the form of AArch64 where practical.
This makes it easier for people to review the code, to borrow similar code, and to see how to eventually move a lot of this
target code for fast-isels into target independent code.
These are just cosmetic changes. Should be no functional difference.
Test Plan:
make check
test-suite for 4 flavors mips32 r1/r2 , -O0/-O2
Reviewers: dsanders
Reviewed By: dsanders
Subscribers: aemerson, llvm-commits, rfuhler
Differential Revision: http://reviews.llvm.org/D5595
llvm-svn: 219633
Summary: Implement the most basic form of conditional branches in Mips fast-isel.
Test Plan:
br1.ll
run 4 flavors of test-suite. mips32 r1/r2 and at -O0/O2
Reviewers: dsanders
Reviewed By: dsanders
Subscribers: llvm-commits, rfuhler
Differential Revision: http://reviews.llvm.org/D5583
llvm-svn: 219556
is over a subset of condition codes.
This fixes the -Werror build which warns about use of uninitialized
variables in the default case.
llvm-svn: 219531
Summary: Add the ability to convert 64 or 32 bit floating point values to integer in mips fast-isel
Test Plan:
fpintconv.ll
ran 4 flavors of test-suite with no errors, misp32 r1/r2 O0/O2
Reviewers: dsanders
Reviewed By: dsanders
Subscribers: llvm-commits, rfuhler, mcrosier
Differential Revision: http://reviews.llvm.org/D5562
llvm-svn: 219511
Summary: Implement conversion of 64 to 32 bit floating point numbers (fptrunc) in mips fast-isel
Test Plan:
fptrunc.ll
checked also with 4 internal mips build bot flavors mip32r1/miprs32r2 and at -O0 and -O2
Reviewers: dsanders
Reviewed By: dsanders
Subscribers: rfuhler
Differential Revision: http://reviews.llvm.org/D5553
llvm-svn: 218785
Summary:
Expand list of supported targets for Mips to include mips32 r1.
Previously it only include r2. More patches are coming where there is
a difference but in the current patches as pushed upstream, r1 and r2
are equivalent.
Test Plan:
simplestorefp1.ll
add new build bots at mips to test this flavor at both -O0 and -O2
Reviewers: dsanders
Reviewed By: dsanders
Differential Revision: http://reviews.llvm.org/D5306
llvm-svn: 217821
This is the final round of renaming. This changes tblgen to emit lower-case
function names for FastEmitInst_* and FastEmit_*, and updates all its uses
in the source code.
Reviewed by Eric
llvm-svn: 217075
a base GOT entry.
Summary:
get tip of tree mips fast-isel to pass test-suite
Two bugs were fixed:
1) one bit booleans were treated as 1 bit signed integers and so the literal '1' could become sign extended.
2) mips uses got for pic but in certain cases, as with string constants for example, many items can be referenced from the same got entry and this case was not handled properly.
Test Plan: test-suite
Reviewers: dsanders
Reviewed By: dsanders
Subscribers: mcrosier
Differential Revision: http://reviews.llvm.org/D4801
llvm-svn: 215155
Vasileios Kalintiris