This removes the need for an assert to ensure the pointer isn't null.
Years ago we had ifs the checked the pointer was non-null before very access to the vector. These checks were removed and replaced with a single assert. But a reference seems more suitable here.
llvm-svn: 338205
X86 normally requires immediates to be a signed 32-bit value which would exclude i64 0x80000000. But for add/sub we can negate the constant and use the opposite instruction.
llvm-svn: 338204
https://rise4fun.com/Alive/jDd
Patterns with add/sub combos can be improved using
'not' ops. This is better for analysis and may lead
to follow-on transforms because 'xor' and 'add' are
commutative/associative. It can also help codegen.
llvm-svn: 338200
This patch adds PFALSE (unconditionally sets all elements of
the predicate to false) and PTEST (set the status flags for the
predicate).
llvm-svn: 338198
SelectionDAGBuilder widens v3i32/v3f32 arguments to
to v4i32/v4f32 which consume an additional register.
In addition to wasting argument space, this produces extra
instructions since now it appears the 4th vector component has
a meaningful value to most combines.
llvm-svn: 338197
This patch adds support for instructions that partition a predicate
based on data-dependent termination conditions in a loop.
BRKA Break after the first true condition
BRKAS Break after the first true condition, setting condition flags
BRKB Break before the first true condition
BRKBS Break before the first true condition, setting condition flags
BRKPA Break after the first true condition, propagating from the
previous partition
BRKPAS Break after the first true condition, propagating from the
previous partition, setting condition flags
BRKPB Break before the first true condition, propagating from the
previous partition
BRKPBS Break before the first true condition, propagating from the
previous partition, setting condition flags
BRKN Propagate break to next partition
BKRNS Propagate break to next partition, setting condition flags
llvm-svn: 338196
We now, from clang, can turn arrays of
static short g_data[] = {16, 16, 16, 16, 16, 16, 16, 16, 0, 0, 0, 0, 0, 0, 0, 0};
into structs of the form
@g_data = internal global <{ [8 x i16], [8 x i16] }> ...
GlobalOpt will incorrectly SROA it, not realising that the access to the first
element may overflow into the second. This fixes it by checking geps more
thoroughly.
I believe this makes the globalsra-partial.ll test case invalid as the %i value
could be out of bounds. I've re-purposed it as a negative test for this case.
Differential Revision: https://reviews.llvm.org/D49816
llvm-svn: 338192
Stack overflow on invalid. While collapsing references, we were skipping over a
cycle check in ForwardTemplateReference leading to a stack overflow. This commit
fixes the problem by duplicating the cycle check in ReferenceType.
llvm-svn: 338190
Summary:
Fixing 2 issues with the DT update in trivial branch switching, though I don't have a case where DT update fails.
1. After splitting ParentBB->UnswitchedBB edge, new edges become: ParentBB->LoopExitBB->UnswitchedBB, so remove ParentBB->LoopExitBB edge.
2. AFAIU, for multiple CFG changes, DT should be updated using batch updates, vs consecutive addEdge and removeEdge calls.
Reviewers: chandlerc, kuhar
Subscribers: sanjoy, jlebar, llvm-commits
Differential Revision: https://reviews.llvm.org/D49925
llvm-svn: 338180
Summary:
Moved Explicit Locals pass to last.
Made that pass obligatory.
Made it convert from register to stack based instructions, and removed the registers.
Fixes to related code that was expecting register based instructions.
Added the correct testing flag to all tests, depending on what the
format they were expecting so far.
Translated one test to stack format as example: reg-stackify-stack.ll
tested:
llvm-lit -v `find test -name WebAssembly`
unittests/MC/*
Reviewers: dschuff, sunfish
Subscribers: sbc100, jgravelle-google, eraman, aheejin, llvm-commits
Differential Revision: https://reviews.llvm.org/D49160
llvm-svn: 338164
Fixed the ASAN failure from before in r338148, so recommiting.
This patch enables the MachineOutliner by default in AArch64 under -Oz.
The MachineOutliner offers around a 4.5% improvement on the current -Oz code
size improvements.
We have done work into improving the debuggability of outlined code, so that
users of -Oz won't be surprised by the optimization. We have also been executing
the LLVM test suite and common external tests such as the SPEC suites
continuously with no issue. The outliner has a low compile-time overhead of
roughly 1%. At this point, the outliner would be a really good addition to the
-Oz pass pipeline!
llvm-svn: 338160
There was a missing check for if a candidate list was entirely deleted. This
adds that check.
This fixes an asan failure caused by running test/CodeGen/AArch64/addsub_ext.ll
with the MachineOutliner enabled.
llvm-svn: 338148
This feature enables the fusion of such operations on Cortex A57 and Cortex
A72, as recommended in their Software Optimisation Guides, sections 4.14 and
4.11, respectively.
Differential revision: https://reviews.llvm.org/D49563
llvm-svn: 338147
Errors like the following are reported by:
https://urldefense.proofpoint.com/v2/url?u=http-3A__lab.llvm.org-3A8011_builders_llvm-2Dclang-2Dx86-5F64-2Dexpensive-2Dchecks-2Dwin_builds_11261&d=DwIBAg&c=5VD0RTtNlTh3ycd41b3MUw&r=DA8e1B5r073vIqRrFz7MRA&m=929oWPCf7Bf2qQnir4GBtowB8ZAlIRWsAdTfRkDaK-g&s=9k-wbEUVpUm474hhzsmAO29VXVvbxJPWD9RTgCD71fQ&e=
*** Bad machine code: Explicit definition marked as use ***
- function: cal_align1
- basic block: %bb.0 entry (0x47edd98)
- instruction: LDB $r3, $r2, 0
- operand 0: $r3
This is because RegState info was missing for ScratchReg inside
expandMEMCPY. This caused incomplete register usage information to
MachineInstr verifier which then would complain as there could be potential
code-gen issue if the complained MachineInstr is used in place where
register usage information matters even though the memcpy expanding is not
in such case as it happens at the last stage of IR optimization pipeline.
We should always specify those register usage information which compiler
couldn't deduct automatically whenever we add a hardware register manually.
Reported-by: Builder llvm-clang-x86_64-expensive-checks-win Build #11261
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Reviewed-by: Yonghong Song <yhs@fb.com>
llvm-svn: 338134
This patch enables the MachineOutliner by default in AArch64 under -Oz.
The MachineOutliner offers around a 4.5% improvement on the current -Oz code
size improvements.
We have done work into improving the debuggability of outlined code, so that
users of -Oz won't be surprised by the optimization. We have also been executing
the LLVM test suite and common external tests such as the SPEC suites
continuously with no issue. The outliner has a low compile-time overhead of
roughly 1%. At this point, the outliner would be a really good addition to the
-Oz pass pipeline!
llvm-svn: 338133
This is a follow-up suggested in D48970.
Alive proofs:
https://rise4fun.com/Alive/sII
We can eliminate an instruction in the usual select-of-constants
to bit hack transform by adjusting the add/sub with constant.
This is always a win.
There are more transforms that are likely wins, but they may need
target hooks in case some targets do not benefit.
This is another step towards making up for canonicalizing to
select-of-constants in rL331486.
llvm-svn: 338132
R600 can't handle immediates for BFE, these will be eliminated later.
Fixes powr/pow regressions n r600 since r334817
Differential Revision: https://reviews.llvm.org/D49641
llvm-svn: 338127
This patch adds support for various integer reduction operations:
SADDV signed add reduction to scalar
UADDV unsigned add reduction to scalar
SMAXV signed maximum reduction to scalar
SMINV signed minimum reduction to scalar
UMAXV unsigned maximum reduction to scalar
UMINV unsigned minimum reduction to scalar
ANDV logical AND reduction to scalar
ORV logical OR reduction to scalar
EORV logical EOR reduction to scalar
The reduction is predicated, e.g.
smaxv s0, p0, z1.s
performs a signed maximum reduction on active elements in z1,
and stores the (signed max value) result in s0.
llvm-svn: 338126
This patch adds support for various floating-point
reduction operations:
FADDA strictly-ordered add reduction, accumulating in scalar
FADDV recursive add reduction to scalar
FMAXV recursive max reduction to scalar
FMINV recursive min reduction to scalar
FMAXNMV recursive max number reduction to scalar
FMINNMV recursive min number reduction to scalar
The reduction is predicated, e.g.
fadda d0, p0, d0, z1.d
performs the add-reduction in strict order on active elements
in z1, accumulating into d0.
faddv d0, p0, z1.d
performs the add-reduction (not in strict order)
on active elements in z1, storing the result in d0.
llvm-svn: 338123
This patch adds support for transcendental acceleration
instructions 'FEXPA' (exponential accelerator) and 'FTSSEL'
(trigonometric select coefficient).
llvm-svn: 338121
The tests with constants show a missing optimization.
Analysis for adds is better than subs, so this can also
help with other transforms. And codegen is better with
adds for targets like x86 (destructive ops, no sub-from).
https://rise4fun.com/Alive/llK
llvm-svn: 338118
This is a follow-up for the patch rL335020. When we replace compares against
trunc with compares against wide IV, we can also replace signed predicates with
unsigned where it is legal.
Reviewed By: reames
Differential Revision: https://reviews.llvm.org/D48763
llvm-svn: 338115
Not sure why they were being explicitly excluded, but I believe all the math inside the if works. I changed the absolute value to be uint64_t instead of int64_t so INT64_MIN+1 wouldn't be signed wrap.
llvm-svn: 338101
Summary:
Some links were failing with "Global is external, but doesn't have
external or weak linkage!" in ThinLTO builds with debug
information. This happened when we elide the body of a global that is
referenced by debug info. This results in a declaration, which we
would then internalize - but declarations cannot be internal. This
change avoids the problem by not internalizing these declarations.
Fixes PR38046.
Reviewers: pcc, tejohnson
Subscribers: mehdi_amini, aprantl, hiraditya, JDevlieghere, steven_wu, dexonsmith, llvm-commits
Differential Revision: https://reviews.llvm.org/D49777
llvm-svn: 338100
Summary:
This is the pattern you get from the loop vectorizer for something like this
int16_t A[1024];
int16_t B[1024];
int32_t C[512];
void pmaddwd() {
for (int i = 0; i != 512; ++i)
C[i] = (A[2*i]*B[2*i]) + (A[2*i+1]*B[2*i+1]);
}
In this case we will have (add (mul (build_vector), (build_vector)), (mul (build_vector), (build_vector))). This is different than the pattern we currently match which has the build_vectors between an add and a single multiply. I'm not sure what C code would get you that pattern.
Reviewers: RKSimon, spatel, zvi
Reviewed By: zvi
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D49636
llvm-svn: 338097
If this happens the operands aren't updated and the existing node is returned. Make sure we pass this existing node up to the DAG combiner so that a proper replacement happens. Otherwise we get stuck in an infinite loop with an unoptimized node.
llvm-svn: 338090
Masked loads are calling DAG.getRoot rather than calling SelectionDAGBuilder::getRoot, which means the PendingLoads weren't emptied to update the root and create any needed TokenFactor. So it would be incorrect to call setRoot for the masked load.
This patch instead adds the masked load to PendingLoads so that the root doesn't get update until a store or scatter or something happens.. Alternatively, we could call SelectionDAGBuilder::getRoot before it, but that would create unnecessary serialization.
llvm-svn: 338085
Summary:
r262157 added ELF-specific logic to put a comdat on the __profc_*
globals created for available_externally functions. We should be able to
generalize that logic to all object file formats that support comdats,
i.e. everything other than MachO. This fixes duplicate symbol errors,
since on COFF, linkonce_odr doesn't make the symbol weak.
Fixes PR38251.
Reviewers: davidxl, xur
Subscribers: hiraditya, dmajor, llvm-commits, aheejin
Differential Revision: https://reviews.llvm.org/D49882
llvm-svn: 338082
The test failure was caused by the compiler not emitting a __debug_ranges section with DWARF 4 and
earlier when no ranges are needed. The test checks for the existence regardless.
llvm-svn: 338081
The DAGCombiner has a system for ensuring all nodes are visited. It doesn't require an AddToWorkList for every node that is created by a combine.
llvm-svn: 338079
Properly demangle function parameter back-references.
Previously we treated lists of function parameters and template
parameters the same. There are some important differences with regards
to back-references, and some less important differences regarding which
characters can appear before or after the name.
The important differences are that with a given type T, all instances of
a function parameter list share the same global back-ref table.
Specifically, if X and Y are function pointers, then there are 3
entities in the declaration X func(Y) which all affect and are affected
by the master parameter back-ref table:
1) The parameter list of X's function type
2) the parameter list of func itself
3) The parameter list of Y's function type.
The previous code would create a back-reference table that was local to
a single parameter list, so it would not be shared across parameter
lists.
This was discovered when porting ms-back-references.test from clang's
mangling tests. All of these tests should now pass with the new changes.
In doing so, I split the function for parsing template and function
parameters into two separate functions. This makes the template
parameter list parsing code in particular very small and easy to
understand now.
Differential Revision: https://reviews.llvm.org/D49875
llvm-svn: 338075
Summary:
In non-integral address spaces, we're not allowed to introduce inttoptr/ptrtoint
intrinsics. Instead, we need to expand any pointer arithmetic as geps on the
base pointer. Luckily this is a common task for SCEV, so all we have to do here
is hook up the corresponding helper function and add test case.
Fixes PR38290
Reviewers: sanjoy
Differential Revision: https://reviews.llvm.org/D49832
llvm-svn: 338073
Only wanting to pass a single SCEV operand to use as the offset of
the GEP is a common operation. Right now this requires creating a
temporary stack array at every call site. Add an overload
that encapsulates that pattern and simplify the call sites.
Suggested-By: sanjoy (in https://reviews.llvm.org/D49832)
llvm-svn: 338072
Summary:
The behavior of followCopyChain with a subreg depends on the order in
which subranges appear in a live interval, which is bad.
This commit fixes that, and allows the copy chain to continue only if
all matching subranges that are not undefined take us to the same def.
I don't have a test for this; the reproducer I had on my branch with
various other local changes does not reproduce the problem on upstream
llvm. Also that reproducer was an ll test; attempting to convert it to a
mir test made the subranges appear in a different order and hid the
problem.
However I would argue that the old behavior was obviously wrong
and needs fixing.
Subscribers: MatzeB, qcolombet, llvm-commits
Differential Revision: https://reviews.llvm.org/D49535
Change-Id: Iee7936ef305918f3b498ac432e2cf651ae5cc2df
llvm-svn: 338070
LowerDbgDeclare inserts a dbg.value before each use of an address
described by a dbg.declare. When inserting a dbg.value before a CallInst
use, however, it fails to append DW_OP_deref to the DIExpression.
The DW_OP_deref is needed to reflect the fact that a dbg.value describes
a source variable directly (as opposed to a dbg.declare, which relies on
pointer indirection).
This patch adds in the DW_OP_deref where needed. This results in the
correct values being shown during a debug session for a program compiled
with ASan and optimizations (see https://reviews.llvm.org/D49520). Note
that ConvertDebugDeclareToDebugValue is already correct -- no changes
there were needed.
One complication is that SelectionDAG is unable to distinguish between
direct and indirect frame-index (FRAMEIX) SDDbgValues. This patch also
fixes this long-standing issue in order to not regress integration tests
relying on the incorrect assumption that all frame-index SDDbgValues are
indirect. This is a necessary fix: the newly-added DW_OP_derefs cannot
be lowered properly otherwise. Basically the fix prevents a direct
SDDbgValue with DIExpression(DW_OP_deref) from being dereferenced twice
by a debugger. There were a handful of tests relying on this incorrect
"FRAMEIX => indirect" assumption which actually had incorrect
DW_AT_locations: these are all fixed up in this patch.
Testing:
- check-llvm, and an end-to-end test using lldb to debug an optimized
program.
- Existing unit tests for DIExpression::appendToStack fully cover the
new DIExpression::append utility.
- check-debuginfo (the debug info integration tests)
Differential Revision: https://reviews.llvm.org/D49454
llvm-svn: 338069
For function pointers, we would print something like
int __cdecl (*)(int)
We need to move the calling convention inside, and print
int (__cdecl *)(int)
This patch implements this change for regular function pointers as
well as member function pointers.
llvm-svn: 338068
This converts the arg qualifier mangling tests from
clang/CodeGenCXX/mangle-ms-arg-qualifiers.cpp to demangling tests.
Most tests already pass, so this patch doesn't come with any
functional change, just the addition of new tests. The few tests
that don't pass are left in with a FIXME label so that they don't
run but serve as documentation about what still doesn't work.
llvm-svn: 338067
After this patch, we can now properly demangle pointers to member
functions. The calling convention is located in the wrong place,
but this will be fixed in a followup since it also affects non
member function pointers.
Differential Revision: https://reviews.llvm.org/D49639
llvm-svn: 338065
Even though gas doesn't document it, it has been supported there for
a very long time.
This produces the 32 bit relative virtual address (aka image relative
address) for a given symbol. ".rva foo" is essentially equal to
".long foo@imgrel".
Differential Revision: https://reviews.llvm.org/D49821
llvm-svn: 338063
Scale the offset of VGPR spills by the wave size when it cannot fit in the
12-bit offset immediate field and so is added to the soffset SGPR. This
accounts for hardware swizzling of scratch memory.
Differential Revision: https://reviews.llvm.org/D49448
llvm-svn: 338060
- Save/restore only registers that are used.
This includes Callee saved registers and Caller saved registers
(arguments and temporaries) for integer and FP registers.
- If there is a call in the interrupt handler, save/restore all
Caller saved registers (arguments and temporaries) and all FP registers.
- Emit special return instructions depending on "interrupt"
attribute type.
Based on initial patch by Zhaoshi Zheng.
Reviewers: asb
Reviewed By: asb
Subscribers: rkruppe, the_o, MartinMosbeck, brucehoult, rbar, johnrusso, simoncook, sabuasal, niosHD, kito-cheng, shiva0217, zzheng, edward-jones, mgrang, rogfer01, llvm-commits
Differential Revision: https://reviews.llvm.org/D48411
llvm-svn: 338047
When fusing instructions A and B, we must add all predecessors of B as
predecessors of A to avoid instructions getting scheduling in between.
There is a special case involving ExitSU: Every other node must be
scheduled before it by design and we don't need to make this explicit in
the graph, however when fusing with a different node we need to schedule
every othere node before the fused node too and we need to make this
explicit now: This patch adds a dependency from the fused node to all
roots in the graph.
Differential Revision: https://reviews.llvm.org/D49830
llvm-svn: 338046
Summary:
A follow-up for D49266 / rL337166.
At least one of these cases is more canonical,
so we really do have to handle it.
https://godbolt.org/g/pkzP3Xhttps://rise4fun.com/Alive/pQyhZZ
We won't get to these cases with I1 being -1,
as that will be constant-folded to true or false.
I'm also not sure we actually hit the 'ule' case,
but i think the worst think that could happen is that being dead code.
Reviewers: spatel, craig.topper, RKSimon, javed.absar, efriedma
Reviewed By: spatel
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D49497
llvm-svn: 338044
Summary:
NVPTX target dos not use register-based frame information. Instead it
relies on the artificial local_depot that is used instead of the frame
and the data for variables must be emitted relatively to this
local_depot.
Reviewers: tra, jlebar, echristo
Subscribers: jholewinski, aprantl, JDevlieghere, llvm-commits
Differential Revision: https://reviews.llvm.org/D45963
llvm-svn: 338039
Summary:
For NVPTX target the value of `DW_AT_frame_base` attribute must be set
to `DW_OP_call_frame_cfa`.
Reviewers: tra, jlebar, echristo
Subscribers: jholewinski, JDevlieghere, llvm-commits
Differential Revision: https://reviews.llvm.org/D45785
llvm-svn: 338036
The standard library functions ::isprint/std::isprint have platform-
and locale-dependent behavior which makes LLVM's output less
predictable. In particular, regression tests my fail depending on the
implementation of these functions.
Implement llvm::isPrint in StringExtras.h with a standard behavior and
replace all uses of ::isprint/std::isprint by a call it llvm::isPrint.
The function is inlined and does not look up language settings so it
should perform better than the standard library's version.
Such a replacement has already been done for isdigit, isalpha, isxdigit
in r314883. gtest does the same in gtest-printers.cc using the following
justification:
// Returns true if c is a printable ASCII character. We test the
// value of c directly instead of calling isprint(), which is buggy on
// Windows Mobile.
inline bool IsPrintableAscii(wchar_t c) {
return 0x20 <= c && c <= 0x7E;
}
Similar issues have also been encountered by Julia:
https://github.com/JuliaLang/julia/issues/7416
I noticed the problem myself when on Windows isprint('\t') started to
evaluate to true (see https://stackoverflow.com/questions/51435249) and
thus caused several unit tests to fail. The result of isprint doesn't
seem to be well-defined even for ASCII characters. Therefore I suggest
to replace isprint by a platform-independent version.
Differential Revision: https://reviews.llvm.org/D49680
llvm-svn: 338034
Create a processHeaderPhiOperands for analysing the instructions
in the aft blocks that must be moved before the loop.
Differential Revision: https://reviews.llvm.org/D49061
llvm-svn: 338033
Previous version of this patch failed on darwin targets because of
different handling of cross-debug-section relocations. This fixes the
tests to emit the DW_AT_str_offsets_base attribute correctly in both
cases. Since doing this is a non-trivial amount of code, and I'm going
to need it in more than one test, I've added a helper function to the
dwarfgen DIE class to do it.
Original commit message follows:
The motivation for this is D49493, where we'd like to test details of
debug_str_offsets behavior which is difficult to trigger from a
traditional test.
This adds the plubming necessary for dwarfgen to generate this section.
The more interesting changes are:
- I've moved emitStringOffsetsTableHeader function from DwarfFile to
DwarfStringPool, so I can generate the section header more easily from
the unit test.
- added a new addAttribute overload taking an MCExpr*. This is used to
generate the DW_AT_str_offsets_base, which links a compile unit to the
offset table.
I've also added a basic test for reading and writing DW_form_strx forms.
Reviewers: dblaikie, JDevlieghere, probinson
Subscribers: llvm-commits, aprantl
Differential Revision: https://reviews.llvm.org/D49670
llvm-svn: 338031
- Some of the v8.3 pointer authentication instruction inhabit the Hint space
- These instructions can be assembled to hint instructions which act as NOP instructions prior to v8.3
- This patch permits using the hint instructions for all v8a targets
- Also, correct the RETA{A,B} instructions to match the instruction attributes of RET (set isTerminator and isBarrier)
Differential Revision: https://reviews.llvm.org/D49786
llvm-svn: 338029
On Windows when raw_fd_ostream::write_impl calls write, a 32 bit input
is required for character count. As a variable with size_t is used for
this argument on x64 integral demotion occurs. In the case of large
files an infinite loop follows.
See PR37926.
This fix allows the output of files larger than previous int32 limit.
Differential Revision: https://reviews.llvm.org/D48948
Patch by Owen Reynolds
Reviewed by: zturner
llvm-svn: 338027
Override getTypeForExtReturn so that functions returning
an i32 typed value have it sign extended on MIPS64.
Also provide patterns to get rid of unneeded sign extensions
for arithmetic instructions which implicitly sign extend
their results.
Differential Revision: https://reviews.llvm.org/D48374
llvm-svn: 338019
This reverts commit r337951.
While that kind of shared constant generally works fine in a MinGW
setting, it broke some cases of inline assembly that worked before:
$ cat const-asm.c
int MULH(int a, int b) {
int rt, dummy;
__asm__ (
"imull %3"
:"=d"(rt), "=a"(dummy)
:"a"(a), "rm"(b)
);
return rt;
}
int func(int a) {
return MULH(a, 1);
}
$ clang -target x86_64-win32-gnu -c const-asm.c -O2
const-asm.c:4:9: error: invalid variant '00000001'
"imull %3"
^
<inline asm>:1:15: note: instantiated into assembly here
imull __real@00000001(%rip)
^
A similar error is produced for i686 as well. The same test with a
target of x86_64-win32-msvc or i686-win32-msvc works fine.
llvm-svn: 338018
a helper function with a nice overview comment. NFC.
This is a preperatory refactoring to implementing another component of
mitigation here that was descibed in the design document but hadn't been
implemented yet.
llvm-svn: 338016
This adds MC support for the crypto instructions that were made optional
extensions in Armv8.2-A (AArch64 only).
Differential Revision: https://reviews.llvm.org/D49370
llvm-svn: 338010
I'm not sure if this was trying to avoid optimizing the new nodes further or what. Or maybe to prevent a cycle if something tried to reform the multiply? But I don't think its a reliable way to do that. If the user of the expanded multiply is visited by the DAGCombiner after this conversion happens, the DAGCombiner will check its operands, see that they haven't been visited by the DAGCombiner before and it will then add the first node to the worklist. This process will repeat until all the new nodes are visited.
So this seems like an unreliable prevention at best. So this patch just returns the new nodes like any other combine. If this starts causing problems we can try to add target specific nodes or something to more directly prevent optimizations.
Now that we handle the combine normally, we can combine any negates the mul expansion creates into their users since those will be visited now.
llvm-svn: 338007
These calls were making sure some newly created nodes were added to worklist, but the DAGCombiner has internal support for ensuring it has visited all nodes. Any time it visits a node it ensures the operands have been queued to be visited as well. This means if we only need to return the last new node. The DAGCombiner will take care of adding its inputs thus walking backwards through all the new nodes.
llvm-svn: 337996
The function in question is copy-pasted lots of times in DWARF-related classes.
Thus it will make sense to place its implementation into the Support library.
Reviewed by: lhames
Differential Revision: https://reviews.llvm.org/D49824
llvm-svn: 337995
- Remove unnecessary anchor function
- Remove unnecessary override of getAnalysisUsage
- Use reference instead of pointers where things cannot be nullptr
- Use ArrayRef instead of std::vector where possible
llvm-svn: 337989
- Avoid duplication of regmask size calculation.
- Simplify allocateRegisterMask() call.
- Rename allocateRegisterMask() to allocateRegMask() to be consistent
with naming in MachineOperand.
llvm-svn: 337986
Some BPF JIT backends would want to optimize memcpy in their own
architecture specific way.
However, at the moment, there is no way for JIT backends to see memcpy
semantics in a reliable way. This is due to LLVM BPF backend is expanding
memcpy into load/store sequences and could possibly schedule them apart from
each other further. So, BPF JIT backends inside kernel can't reliably
recognize memcpy semantics by peephole BPF sequence.
This patch introduce new intrinsic expand infrastructure to memcpy.
To get stable in-order load/store sequence from memcpy, we first lower
memcpy into BPF::MEMCPY node which then expanded into in-order load/store
sequences in expandPostRAPseudo pass which will happen after instruction
scheduling. By this way, kernel JIT backends could reliably recognize
memcpy through scanning BPF sequence.
This new memcpy expand infrastructure is gated by a new option:
-bpf-expand-memcpy-in-order
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Signed-off-by: Yonghong Song <yhs@fb.com>
llvm-svn: 337977
Reuse the handling for llvm.used, and don't transform such globals.
Fixes a failure on the asan buildbot caused by my previous commit.
llvm-svn: 337973
If the DAGCombiner's rotate matching was working as expected,
I don't think we'd see any test diffs here.
This sidesteps the issue of custom lowering for rotates raised in PR38243:
https://bugs.llvm.org/show_bug.cgi?id=38243
...by only dealing with legal operations.
llvm-svn: 337966
In some cases LSV sees (load/store _ (select _ <pointer expression>
<pointer expression>)) patterns in input IR, often due to sinking and
other forms of CFG simplification, sometimes interspersed with
bitcasts and all-constant-indices GEPs. With this
patch`areConsecutivePointers` method would attempt to handle select
instructions. This leads to an increased number of successful
vectorizations.
Technically, select instructions could appear in index arithmetic as
well, however, we don't see those in our test suites / benchmarks.
Also, there is a lot more freedom in IR shapes computing integral
indices in general than in what's common in pointer computations, and
it appears that it's quite unreliable to do anything short of making
select instructions first class citizens of Scalar Evolution, which
for the purposes of this patch is most definitely an overkill.
Reviewed By: rampitec
Differential Revision: https://reviews.llvm.org/D49428
llvm-svn: 337965
Instead of depending on implicit padding from the structure layout code,
use a packed struct and emit the padding explicitly.
Differential Revision: https://reviews.llvm.org/D49710
llvm-svn: 337961
GNU binutils tools have no problems with this kind of shared constants,
provided that we actually hook it up completely in AsmPrinter and
produce a global symbol.
This effectively reverts SVN r335918 by hooking the rest of it up
properly.
This feature was implemented originally in SVN r213006, with no reason
for why it can't be used for MinGW other than the fact that GCC doesn't
do it while MSVC does.
Differential Revision: https://reviews.llvm.org/D49646
llvm-svn: 337951
Craig Topper