Some tiny cosmetic code changes to follow. Because of the wide
ranging nature of the patch a full 24 test cycle was needed to
check against regression. This was the smallest patch I could
make to progress from the earlier ones in the series.
llvm-svn: 197350
branch instructions for mips and micromips instruction sets thus avoiding
the situation of generating branches to undesired locations if offsets
cannot be encoded.
This patch also checks if a fixup cannot be applied and returns a fatal error
if that's the case.
llvm-svn: 197223
Save S2(reg 18) only when we are calling floating point stubs that
have a return value of float or complex. Some more work to make this
better but this is the first step.
llvm-svn: 196921
Summary:
The MSA ld.[bhwd] and st.[bhwd] instructions scale the immediate by the
element size before use as an offset. The offset must therefore be a
multiple of the element size to be valid in these instructions. However,
an unaligned base address is valid in MSA.
This commit causes the compiler to emit valid code when the calculated
offset is not a multiple of the element size by accounting for the offset
using addiu and using a zero offset in the load/store.
Depends on D2338
Reviewers: matheusalmeida
Reviewed By: matheusalmeida
Differential Revision: http://llvm-reviews.chandlerc.com/D2339
llvm-svn: 196777
Summary:
The immediate in these instructions is scaled before use as an offset.
They therefore have a wider reach than ld.b/st.b.
Reviewers: matheusalmeida
Reviewed By: matheusalmeida
Differential Revision: http://llvm-reviews.chandlerc.com/D2338
llvm-svn: 196775
As we can't make a complete solution now it has been decided to enable .set directive to handle long jump expressions. This will cause parser to report errors when parsing integer based register assignments, for example:
.set r3, will be reported as error. Still, the need for expressions is higher priority as the integer based register assignments are Mips specific and can be avoided using register names.
llvm-svn: 196773
in case the operands are constants and its difference is |1|.
It should be possible in those cases to rematerialize the result using
MIPS's slt and similar instructions.
The small update to some of the tests in cmov.ll, sel1c.ll and sel2c.ll was needed
otherwise the optimization implemented in this patch would have been triggered
(difference between the operands was 1) and that would have changed the semantic
of the tests.
llvm-svn: 196498
not being correctly encoded/decoded.
In more detail, immediate fields of LD/ST instructions should be
divided/multiplied by the size of the data format before encoding and
after decoding, respectively.
llvm-svn: 196494
this completes the basic port of ARM constant islands to Mips16.
More testing, code review, cleanup is in order but basically everything
seems to be working. A bug in gas is preventing some of the runtime
testing but I hope to resolve this soon.
llvm-svn: 196331
MO_JumpTableIndex and MO_ExternalSymbol don't show up on inline asm.
Keeping parts of the old asm printer just to print inline asm to a string that
we then parse back looks like a hack.
llvm-svn: 196111
This prevents the compiler from emitting invalid ld.[bhwd]'s and st.[bhwd]'s
when the stack frame is between 512 and 32,768 bytes in size.
llvm-svn: 195973
in constant islands for Mips16. We introdcuce JalB16 as a synomnym
for Jal16. It makes it easier to read and is also necessary because
Jal16 is a call instruction but JalB16 is being used as a branch.
Various parts of LLVM will not work properly even in this late stage of
the backend if we use what was declared as a call instruction to function
as a branch. For one, basic block labels may not get emitted in some
situations.
llvm-svn: 195968
I think, in principle, intrinsics_gen may be added explicitly.
That said, it can be added incidentally, since each target already has dependencies to llvm-tblgen.
Almost all source files depend on both CommonTaleGen and intrinsics_gen.
Explicit add_dependencies() have been pruned under lib/Target.
llvm-svn: 195929
add_public_tablegen_target adds *CommonTableGen to LLVM_COMMON_DEPENDS.
LLVM_COMMON_DEPENDS affects add_llvm_library (and other add_target stuff) within its scope.
llvm-svn: 195927
conditional branches for very large targets. That will be the next small
patch. Everything now should in principle work as good (functionality
wise) as without constant islands so we decided at Mips/Imagination to
make constant islands the default for Mips16 now so that it will get
excercised a lot and this port is still experimentatl though hopefully soon
we will change the status. Some more cleanup and code review is in order
but things are converging fast.
llvm-svn: 195902
make PIC calls a little more efficient:
1. Remove instructions setting up $gp if it is known that a function has been
called at least once.
2. Save the address of a called function in a register instead of loading
it from the GOT at every call site.
llvm-svn: 195892
to what is needed for constant islands. The prescan method for Mips16 constant
islands will eventually go away. It is only temporary and should be done
earlier when the instructions are first created or from the DAG. If we keep
it here we need to handle better the situation where constant islands
is called multiple times since don't want to prescan more than once.
llvm-svn: 195569
I had to move some code and I moved a declaration forward past it's first use
in the function but by nutty coincidence there was another variable of the same
name and type and with completely unrelated function that was declared globally
in the class so no compilation error ensued.
It required some unusual conditions for it to even matter. Caused test
case casts.c in test-suite to fail during compilation with a duplicate
symbol error. I would have noticed it during final code review for this port.
llvm-svn: 195565
lowerBUILD_VECTOR() was treating integer constant splats as being legal
regardless of whether they had undef values. This caused instruction
selection failures when the undefs were legalized to zero, making the
constant non-splat.
Fixed this by requiring HasAnyUndef to be false for a integer constant
splat to be legal. If it is true, a new node is generated with the undefs
replaced with the necessary values to remain a splat.
llvm-svn: 195455
Mask == ~InvMask asserts if the width of Mask and InvMask differ.
The combine isn't valid (with two exceptions, see below) if the widths differ
so test for this before testing Mask == ~InvMask.
In the specific cases of Mask=~0 and InvMask=0, as well as Mask=0 and
InvMask=~0, the combine is still valid. However, there are more appropriate
combines that could be used in these cases such as folding x & 0 to 0, or
x & ~0 to x.
llvm-svn: 195364
There's no test case for this commit. This is because it is doubtful that the
incorrect behaviour can actually trigger. When MSA is not enabled, the type
legalizer should have eliminated all occurrences of patterns the affected
pseudo-instruction could possibly match before instruction selection occurs.
llvm-svn: 195252
Hard float for mips16 means essentially to compile as soft float but to
use a runtime library for soft float that is written with native mips32
floating point instructions (those runtime routines run in mips32 hard
float mode).
The patch reviewed by Reed Kotler.
llvm-svn: 195123
No true functional changes.
Change the "hack" name of emitMipsHackSTOCG to emitSymSTO.
Remove demonstration code in AsmParser for emitMipsHackSTOCG and
emitMipsHackELFFlags. The STO field is in an ELF symbol and is not
an explicit directive. That said, we are missing the compliment call
in AsmParser and that will need to be addressed soon.
XFAIL dummy tests for emitMipsHackELFFlags and emitMipsHackELFFlags.
These will built out with following patches.
llvm-svn: 195067
This patch removes most of the trivial cases of weak vtables by pinning them to
a single object file. The memory leaks in this version have been fixed. Thanks
Alexey for pointing them out.
Differential Revision: http://llvm-reviews.chandlerc.com/D2068
Reviewed by Andy
llvm-svn: 195064
Fixed an inappropriate use of BuildPairF64 when compiling for MIPS32 with FP64
which resulted in an impossible constraint on the register allocation. It now
uses BuildPairF64_64.
llvm-svn: 195007
This change is incorrect. If you delete virtual destructor of both a base class
and a subclass, then the following code:
Base *foo = new Child();
delete foo;
will not cause the destructor for members of Child class. As a result, I observe
plently of memory leaks. Notable examples I investigated are:
ObjectBuffer and ObjectBufferStream, AttributeImpl and StringSAttributeImpl.
llvm-svn: 194997
This patch removes most of the trivial cases of weak vtables by pinning them to
a single object file.
Differential Revision: http://llvm-reviews.chandlerc.com/D2068
Reviewed by Andy
llvm-svn: 194865
Summary:
When getConstant() is called for an expanded vector type, it is split into
multiple scalar constants which are then combined using appropriate build_vector
and bitcast operations.
In addition to the usual big/little endian differences, the case where the
element-order of the vector does not have the same endianness as the elements
themselves is also accounted for. For example, for v4i32 on big-endian MIPS,
the byte-order of the vector is <3210,7654,BA98,FEDC>. For little-endian, it is
<0123,4567,89AB,CDEF>.
Handling this case turns out to be a nop since getConstant() returns a splatted
vector (so reversing the element order doesn't change the value)
This fixes a number of cases in MIPS MSA where calling getConstant() during
operation legalization introduces illegal types (e.g. to legalize v2i64 UNDEF
into a v2i64 BUILD_VECTOR of illegal i64 zeros). It should also handle bigger
differences between illegal and legal types such as legalizing v2i64 into v8i16.
lowerMSASplatImm() in the MIPS backend no longer needs to avoid calling
getConstant() so this function has been updated in the same patch.
For the sake of transparency, the steps I've taken since the review are:
* Added 'virtual' to isVectorEltOrderLittleEndian() as requested. This revealed
that the MIPS tests were falsely passing because a polymorphic function was
not actually polymorphic in the reviewed patch.
* Fixed the tests that were now failing. This involved deleting the code to
handle the MIPS MSA element-order (which was previously doing an byte-order
swap instead of an element-order swap). This left
isVectorEltOrderLittleEndian() unused and it was deleted.
* Fixed build failures caused by rebasing beyond r194467-r194472. These build
failures involved the bset, bneg, and bclr instructions added in these commits
using lowerMSASplatImm() in a way that was no longer valid after this patch.
Some of these were fixed by calling SelectionDAG::getConstant() instead,
others were fixed by a new function getBuildVectorSplat() that provided the
removed functionality of lowerMSASplatImm() in a more sensible way.
Reviewers: bkramer
Reviewed By: bkramer
CC: llvm-commits
Differential Revision: http://llvm-reviews.chandlerc.com/D1973
llvm-svn: 194811
short form. Constant islands will expand them if they are out of range.
Since there is not direct object emitter at this time, it does not
have any material affect because the assembler sorts this out. But we
need to know for the actual constant island work. We track the difference
by putting # 16 inst in the comments.
llvm-svn: 194766
specifically about the .space directive. This allows us to force large
blocks of code to appear in test cases for things like constant islands
without having to make giant test cases to force things like long
branches to take effect.
llvm-svn: 194555
Like GCC, this re-uses the 'f' constraint and a new 'w' print-modifier:
asm ("ldi.w %w0, 1", "=f"(result));
Unlike GCC, the 'w' print-modifer is not _required_ to produce the intended
output. This is a consequence of differences in the internal handling of
the registers in each compiler. To be source-compatible between the
compilers, users must use the 'w' print-modifier.
MSA registers (including control registers) are supported in clobber lists.
llvm-svn: 194476
This has no material effect at this time since we don't have a direct
object emitter for mips16 and the assembler can't tell them apart. I
place a comment "16 bit inst" for those so that I can tell them apart in the
output. The constant island pass has only been minimally changed to allow
this. More complete branch work is forthcoming but this is the first
step.
llvm-svn: 194442
formal arguments on the stack and stores created afterwards. We need this to
ensure tail call optimized function calls do not write over the argument area
of the stack before it is read out.
llvm-svn: 194309
of being converted and this path is not relevant to anything at this time
so I have just disabled it for a few days while I'm at the LLVM conference
and don't have time to complete it or properly fix it.
llvm-svn: 194201
we don't have such an operand.
Suprisingly enough, this is never actually accounted for in the
ARM version when determining offset ranges. In both places there is the
comment:
- // FIXME: Make use full range of soimm values.
(soimm = shift operand immediate).
llvm-svn: 194101
Submit the basic port of the rest of ARM constant islands code to Mips.
Two test cases are added which reflect the next level of functionality:
constants getting moved to water areas that are out of range from the
initial placement at the end of the function and basic blocks being split to
create water when none exists that can be used. There is a bunch of this
code that is not complete and has been marked with IN_PROGRESS. I will
finish cleaning this all up during the next week or two and submit the
rest of the test cases. I have elminated some code for dealing with
inline assembly because to me it unecessarily complicates things and
some of the newer features of llvm like function attributies and builtin
assembler give me better tools to solve the alignment issues created
there. Also, for Mips16 I even have the option of not doing constant
islands in the present of inline assembler if I chose. When everything
has been completed I will summarize the port and notify people that
are knowledgable regarding the ARM Constant Islands code so they can
review it in it's entirety if they wish.
llvm-svn: 194053
Two test cases are added which reflect the next level of functionality:
constants getting moved to water areas that are out of range from the
initial placement at the end of the function and basic blocks being split to
create water when none exists that can be used. There is a bunch of this
code that is not complete and has been marked with IN_PROGRESS. I will
finish cleaning this all up during the next week or two and submit the
rest of the test cases. I have elminated some code for dealing with
inline assembly because to me it unecessarily complicates things and
some of the newer features of llvm like function attributies and builtin
assembler give me better tools to solve the alignment issues created
there. Also, for Mips16 I even have the option of not doing constant
islands in the present of inline assembler if I chose.
llvm-svn: 194019
Fixing this Windows build error:
..\lib\Target\Mips\MipsSEISelLowering.cpp(997) : error C2027: use of undefined type 'llvm::raw_ostream'
llvm-svn: 193696
Also corrected the definition of the intrinsics for these instructions (the
result register is also the first operand), and added intrinsics for bsel and
bseli to clang (they already existed in the backend).
These four operations are mostly equivalent to bsel, and bseli (the difference
is which operand is tied to the result). As a result some of the tests changed
as described below.
bitwise.ll:
- bsel.v test adapted so that the mask is unknown at compile-time. This stops
it emitting bmnzi.b instead of the intended bsel.v.
- The bseli.b test now tests the right thing. Namely the case when one of the
values is an uimm8, rather than when the condition is a uimm8 (which is
covered by bmnzi.b)
compare.ll:
- bsel.v tests now (correctly) emits bmnz.v instead of bsel.v because this
is the same operation (see MSA.txt).
i8.ll
- CHECK-DAG-ized test.
- bmzi.b test now (correctly) emits equivalent bmnzi.b with swapped operands
because this is the same operation (see MSA.txt).
- bseli.b still emits bseli.b though because the immediate makes it
distinguishable from bmnzi.b.
vec.ll:
- CHECK-DAG-ized test.
- bmz.v tests now (correctly) emits bmnz.v with swapped operands (see
MSA.txt).
- bsel.v tests now (correctly) emits bmnz.v with swapped operands (see
MSA.txt).
llvm-svn: 193693
This required correcting the definition of the bins[lr]i intrinsics because
the result is also the first operand.
It also required removing the (arbitrary) check for 32-bit immediates in
MipsSEDAGToDAGISel::selectVSplat().
Currently using binsli.d with 2 bits set in the mask doesn't select binsli.d
because the constant is legalized into a ConstantPool. Similar things can
happen with binsri.d with more than 10 bits set in the mask. The resulting
code when this happens is correct but not optimal.
llvm-svn: 193687
(or (and $a, $mask), (and $b, $inverse_mask)) => (vselect $mask, $a, $b).
where $mask is a constant splat. This allows bitwise operations to make use
of bsel.
It's also a stepping stone towards matching bins[lr], and bins[lr]i from
normal IR.
Two sets of similar tests have been added in this commit. The bsel_* functions
test the case where binsri cannot be used. The binsr_*_i functions will
start to use the binsri instruction in the next commit.
llvm-svn: 193682
splat.d is implemented but this subtest is currently disabled. This is because
it is difficult to match the appropriate IR on MIPS32. There is a patch under
review that should help with this so I hope to enable the subtest soon.
llvm-svn: 193680
Before I just ported the shell of the pass. I've tried to keep everything
nearly identical to the ARM version. I think it will be very easy to eventually
merge these two and create a new more general pass that other targets can
use. I have some improvements I would like to make to allow pools to
be shared across functions and some other things. When I'm all done we
can think about making a more general pass. More to be ported but the
basic mechanism works now almost as good as gcc mips16.
llvm-svn: 193509
These instructions are logically related as they allow read/write of MSA control registers.
Currently MSA control registers are emitted by number but hopefully that will change as soon
as GAS starts accepting them by name as that would make the assembly easier to read.
llvm-svn: 193078
These were present in a previous version of the MSA spec but are not
present in the published version. There is no hardware that uses these
instructions.
llvm-svn: 192888
INSERT is the first type of MSA instruction that requires a change to the way
MSA registers are parsed. This happens because MSA registers may be suffixed by
an index in the form of an immediate or a general purpose register. The changes
to parseMSARegs reflect that requirement.
llvm-svn: 192582
INSERT is the first type of MSA instruction that requires a change to the way MSA registers are parsed.
This happens because MSA registers may be suffixed by an index in the form of an immediate or a
general purpose register. The changes to parseMSARegs reflect that requirement.
llvm-svn: 192447
Reed Kotler