This reverts commit r262316.
It seems that my change breaks an out-of-tree chromium buildbot, so
I'm reverting this in order to investigate the situation further.
llvm-svn: 262387
Summary:
This patch modifies the existing comparison, branch, conditional-move
and select patterns, and adds new ones where needed. Also, the updated
SLT{u,i,iu} set of instructions generate a GPR width result.
The majority of the code changes in the Mips back-end fix the wrong
assumption that the result of SETCC nodes always produce an i32 value.
The changes in the common code path account for the fact that in 64-bit
MIPS targets, i1 is promoted to i32 instead of i64.
Reviewers: dsanders
Subscribers: dsanders, llvm-commits
Differential Revision: http://reviews.llvm.org/D10970
llvm-svn: 262316
Summary:
Although the multiclass for i32 selects might seem redundant as it has
only one instantiation, we will use it to replace the correspondent
patterns in Mips64r6InstrInfo.td in follow-up commits.
Reviewers: dsanders
Subscribers: llvm-commits, dsanders
Differential Revision: http://reviews.llvm.org/D14612
llvm-svn: 255110
Summary:
The bug was that the MIPS32R6/MIPS64R6/microMIPS32R6 versions of LSA and DLSA
(unlike the MSA version) failed to account for the off-by-one encoding of the
immediate. The range is actually 1..4 rather than 0..3.
Reviewers: vkalintiris
Subscribers: atanasyan, dsanders, llvm-commits
Differential Revision: http://reviews.llvm.org/D14015
llvm-svn: 252295
Summary:
Added support for the following instructions:
CACHEE, LBE, LBUE, LHE, LHUE, LWE, LLE, LWLE, LWRE, PREFE,
SBE, SHE, SWE, SCE, SWLE, SWRE, TLBINV, TLBINVF
This required adding some infrastructure for the EVA ASE.
Patch by Scott Egerton.
Reviewers: vkalintiris, dsanders
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D11139
llvm-svn: 247669
Summary: This will enable the IAS to reject floating point instructions if soft-float is enabled.
Reviewers: dsanders, echristo
Reviewed By: dsanders
Subscribers: jfb, llvm-commits, mpf
Differential Revision: http://reviews.llvm.org/D9053
llvm-svn: 236713
Summary:
It seems we accidentally read the wrong column of the table MIPS64r6 spec
and used the names for c.cond.fmt instead of cmp.cond.fmt.
Differential Revision: http://reviews.llvm.org/D4387
llvm-svn: 212607
Summary:
RET, and RET_MM have been replaced by a pseudo named PseudoReturn.
In addition a version with a 64-bit GPR named PseudoReturn64 has been
added.
Instruction selection for a return matches RetRA, which is expanded post
register allocation to PseudoReturn/PseudoReturn64. During MipsAsmPrinter,
this PseudoReturn/PseudoReturn64 are emitted as:
- (JALR64 $zero, $rs) on MIPS64r6
- (JALR $zero, $rs) on MIPS32r6
- (JR_MM $rs) on microMIPS
- (JR $rs) otherwise
On MIPS32r6/MIPS64r6, 'jr $rs' is an alias for 'jalr $zero, $rs'. To aid
development and review (specifically, to ensure all cases of jr are
updated), these aliases are temporarily named 'r6.jr' instead of 'jr'.
A follow up patch will change them back to the correct mnemonic.
Added (JALR $zero, $rs) to MipsNaClELFStreamer's definition of an indirect
jump, and removed it from its definition of a call.
Note: I haven't accounted for MIPS64 in MipsNaClELFStreamer since it's
doesn't appear to account for any MIPS64-specifics.
The return instruction created as part of eh_return expansion is now expanded
using expandRetRA() so we use the right return instruction on MIPS32r6/MIPS64r6
('jalr $zero, $rs').
Also, fixed a misuse of isABI_N64() to detect 64-bit wide registers in
expandEhReturn().
Reviewers: jkolek, vmedic, mseaborn, zoran.jovanovic, dsanders
Reviewed By: dsanders
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D4268
llvm-svn: 212604
Summary:
This instruction is re-encoded in MIPS32r6/MIPS64r6 without changing the
restrictions. We hadn't implemented it for earlier ISA's so it has been added to those too.
Differential Revision: http://reviews.llvm.org/D4265
llvm-svn: 211590
Summary:
There is no change to the restrictions, just the result register is stored
once in the encoding rather than twice. The rt field is zero in
MIPS32r6/MIPS64r6.
Depends on D4119
Reviewers: zoran.jovanovic, jkolek, vmedic
Reviewed By: vmedic
Differential Revision: http://reviews.llvm.org/D4120
llvm-svn: 211019
Summary:
The linked-load, store-conditional operations have been re-encoded such
that have a 9-bit offset instead of the 16-bit offset they have prior to
MIPS32r6/MIPS64r6.
While implementing this, I noticed that the atomic load/store pseudos always
emit a sign extension using sll and sra. I have improved this to use seb/seh
when they are available (MIPS32r2/MIPS64r2 and above).
Depends on D4118
Reviewers: jkolek, zoran.jovanovic, vmedic
Reviewed By: vmedic
Differential Revision: http://reviews.llvm.org/D4119
llvm-svn: 211018
Summary:
The error message for the invalid.s cases isn't very helpful. It happens because
there is an instruction with a wider immediate that would have matched if the
NotMips32r6 predicate were true. I have some WIP to improve the message but it
affects most error messages for removed/re-encoded instructions on
MIPS32r6/MIPS64r6 and should therefore be a separate commit.
Depens on D4115
Reviewers: zoran.jovanovic, jkolek, vmedic
Reviewed By: vmedic
Differential Revision: http://reviews.llvm.org/D4117
llvm-svn: 211012
Summary:
cache and pref were added in MIPS-III, and MIPS32 but were re-encoded in
MIPS32r6/MIPS64r6 to use a 9-bit offset rather than the 16-bit offset
available to earlier cores.
Resolved the decoding conflict between pref and lwc3.
Depends on D4115
Reviewers: zoran.jovanovic, jkolek, vmedic
Reviewed By: vmedic
Differential Revision: http://reviews.llvm.org/D4116
llvm-svn: 210900
Summary:
These MIPS-3D instructions have never been implemented in LLVM so we only
add testcases.
Reviewers: zoran.jovanovic, jkolek, vmedic
Reviewed By: vmedic
Differential Revision: http://reviews.llvm.org/D4115
llvm-svn: 210899
Summary:
b(ge|lt)zal have been removed in MIPS32r6/MIPS64r6. However, bal (an alias
for 'bgezal $zero, $offset') still remains with the same encoding it had
prior to MIPS32r6/MIPS64r6.
Updated the MipsNaCLELFStreamer, and MipsLongBranch to correctly handle the
MIPS32r6/MIPS64r6 BAL instruction in addition to the existing BAL_BR pseudo.
No changes were required to the CodeGen test that looks for BAL
(test/CodeGen/Mips/longbranch.ll) since the new instruction has the same
syntax.
Depends on D4113
Reviewers: jkolek, zoran.jovanovic, vmedic
Reviewed By: vmedic
Differential Revision: http://reviews.llvm.org/D4114
llvm-svn: 210898
Summary:
Also tightened up the acceptable condition operand for these instructions
on MIPS-I to MIPS-III. Support for $fcc[1-7] was added in MIPS-IV. Prior
to that only $fcc0 is acceptable.
We currently don't optimize (BEQZ (NOT $a), $target) and similar. It's
probably best to do this in InstCombine.
Depends on D4111
Reviewers: jkolek, zoran.jovanovic, vmedic
Reviewed By: vmedic
Differential Revision: http://reviews.llvm.org/D4112
llvm-svn: 210787
Summary:
These instructions are not implemented for any MIPS ISA so we only need
testcases.
Depends on D4110
Reviewers: jkolek, zoran.jovanovic, vmedic
Reviewed By: vmedic
Differential Revision: http://reviews.llvm.org/D4111
llvm-svn: 210786
Summary:
Folded mips64-fp-indexed-ls.ll into fp-indexed-ls.ll. To do so, the zext's in
mips64-fp-indexed-ls.ll were changed to implicit sign extensions (performed
by getelementptr). This does not affect the purpose of the test.
Depends on D4004
Reviewers: zoran.jovanovic, jkolek, vmedic
Reviewed By: vmedic
Differential Revision: http://reviews.llvm.org/D4110
llvm-svn: 210784
Summary: We haven't implemented this instruction so we only add a test case.
Reviewers: vmedic, zoran.jovanovic, jkolek
Reviewed By: jkolek
Differential Revision: http://reviews.llvm.org/D4004
llvm-svn: 210779
Summary:
c.cond.fmt has been replaced by cmp.cond.fmt. Where c.cond.fmt wrote to
dedicated condition registers, cmp.cond.fmt writes 1 or 0 to normal FGR's
(like the GPR comparisons).
mov[fntz] have been replaced by seleqz and selnez. These instructions
conditionally zero a register based on a bool in a GPR. The results can
then be or'd together to act as a select without, for example, requiring a third
register read port.
mov[fntz].[ds] have been replaced with sel.[ds]
MIPS64r6 currently generates unnecessary sign-extensions for most selects.
This is because the result of a SETCC is currently an i32. Bits 32-63 are
undefined in i32 and the behaviour of seleqz/selnez would otherwise depend
on undefined bits. Later, we will fix this by making the result of SETCC an
i64 on MIPS64 targets.
Depends on D3958
Reviewers: jkolek, vmedic, zoran.jovanovic
Reviewed By: vmedic, zoran.jovanovic
Differential Revision: http://reviews.llvm.org/D4003
llvm-svn: 210777
Summary:
This patch updates both the assembler and the code generator.
MIPS32r6/MIPS64r6 replaces them with maddf.[ds] and msubf.[ds] which are fused
multiply-add/sub operations. We don't emit these yet, this patch only prevents the removed instructions from being emitted.
Depends on D3955
Reviewers: jkolek, zoran.jovanovic, vmedic
Reviewed By: vmedic
Differential Revision: http://reviews.llvm.org/D3956
llvm-svn: 210763
Vasileios Kalintiris