Environments are optional and a missing environment is distinct from
the default "unknown" environment enumerator. The test is negative,
because the function uses the host triple and is unpredictable.
rdar://91007207
https://reviews.llvm.org/D122946
Differential Revision: https://reviews.llvm.org/D122946
Applied modernize-use-default-member-init clang-tidy check over LLDB.
It appears in many files we had already switched to in class member init but
never updated the constructors to reflect that. This check is already present in
the lldb/.clang-tidy config.
Differential Revision: https://reviews.llvm.org/D121481
Accept a function object instead of a raw pointer. This avoids a bunch
of boilerplate typically needed to pass arguments to the thread
functions.
Differential Revision: https://reviews.llvm.org/D120321
Remove the port predicate from Socket and ConnectionFileDescriptor,
and move it to gdb-remote. It is specifically relevant to the threading
used inside gdb-remote and with the new port callback API, we can
reliably move it there. While at it, switch from the custom Predicate
to std::promise/std::future.
Differential Revision: https://reviews.llvm.org/D112357
Use llvm::Optional<uint16_t> instead of int for port number
in UriParser::Parse(), and use llvm::None to indicate missing port
instead of a magic value of -1.
Differential Revision: https://reviews.llvm.org/D112309
Add setters for common teletype properties to the Terminal class:
- SetRaw() to enable common raw mode options
- SetBaudRate() to set the baud rate
- SetStopBits() to select the number of stop bits
- SetParity() to control parity bit in the output
- SetHardwareControlFlow() to enable or disable hardware control flow
(if supported)
Differential Revision: https://reviews.llvm.org/D111030
Open and use the secondary end of a pty for testing Terminal properties
in order to fix the tests on Darwin. While at it, streamline getting
the fd and Terminal class.
Differential Revision: https://reviews.llvm.org/D111402
Refactor the XML converting attribute and text getters to use LLVM API.
While at it, remove some redundant error and missing XML support
handling, as the called base functions do that anyway. Add tests
for these methods.
Note that this patch changes the getter behavior to be IMHO more
correct. In particular:
- negative and overflowing integers are now reported as failures to
convert, rather than being wrapped over or capped
- digits followed by text are now reported as failures to convert
to double, rather than their numeric part being converted
Differential Revision: https://reviews.llvm.org/D110410
Refactor Socket::DecodeHostAndPort() to use LLVM API over redundant
LLDB API. In particular, this means llvm::Regex, llvm::Error return
type and llvm::to_integer().
While at it, change the port type from int32_t to uint16_t. The method
never returns any value outside this range, and using the correct type
allows us to rely on getAsInteger()'s implicit overflow check.
Differential Revision: https://reviews.llvm.org/D110391
Refactor Socket::DecodeHostAndPort() to use LLVM API over redundant
LLDB API. In particular, this means llvm::Regex, llvm::Error return
type and llvm::to_integer().
While at it, change the port type from int32_t to uint16_t. The method
never returns any value outside this range, and using the correct type
allows us to rely on getAsInteger()'s implicit overflow check.
Differential Revision: https://reviews.llvm.org/D110391
getpeername will return addrlen = 2 (sizeof sa_family_t) for unnamed
sockets (those not assigned a name with bind(2)). This is typically true
for client sockets as well as those created by socketpair(2).
This GetSocketName used to crash for sockets which were connected to
these kinds of sockets. Now it returns an empty string.
Modify OpenOptions enum to open the future path into synchronizing
vFile:open bits with GDB. Currently, LLDB and GDB use different flag
models effectively making it impossible to match bits. Notably, LLDB
uses two bits to indicate read and write status, and uses union of both
for read/write. GDB uses a value of 0 for read-only, 1 for write-only
and 2 for read/write.
In order to future-proof the code for the GDB variant:
1. Add a distinct eOpenOptionReadWrite constant to be used instead
of (eOpenOptionRead | eOpenOptionWrite) when R/W access is required.
2. Rename eOpenOptionRead and eOpenOptionWrite to eOpenOptionReadOnly
and eOpenOptionWriteOnly respectively, to make it clear that they
do not mean to be combined and require update to all call sites.
3. Use the intersection of all three flags when matching against
the three possible values.
This commit does not change the actual bits used by LLDB.
Differential Revision: https://reviews.llvm.org/D106984
Test leaks if we run
tools/lldb/unittests/Host/HostTests without --gtest_filter
Reviewed By: teemperor
Differential Revision: https://reviews.llvm.org/D104091
Support registering multiple callbacks for a single signal. This is
necessary to support multiple co-existing native process instances, with
separate SIGCHLD handlers.
The system signal handler is registered on first request, additional
callback are added on subsequent requests. The system signal handler
is removed when last callback is unregistered.
Differential Revision: https://reviews.llvm.org/D100418
This test seems to be broken there (which is not totally surprising as
this functionality was never used on windows). Disable the test while I
investigate.
- s/createUniqueFile/createUniquePath -- we don't want to create the file,
just the file name
- s/data()/str().c_str()/ -- paths given to system apis must be
null-terminated
When running in an ipv6-only environment where `AF_INET` sockets are not available, many lldb tests (mostly gdb remote tests) fail because things like `127.0.0.1` don't work there.
Use `localhost` instead of `127.0.0.1` whenever possible, or include a fallback of creating `AF_INET6` sockets when `AF_INET` fails.
Reviewed By: labath
Differential Revision: https://reviews.llvm.org/D87333
When debugging a remote platform, the platform you get from
GetPlatformForArchitecture doesn't inherit from PlatformDarwin.
HostInfoMacOSX seems like the right place to have a global store of
local paths.
Differential Revision: https://reviews.llvm.org/D79364
Sadly IPv6 is still not present anywhere. The test was attempting to
detect&skip such hosts, but the way it did that (essentially, by calling
getaddrinfo) meant that it only detected hosts which have IPv6 support
completely compiled out. It did not do anything about hosts which have
it compiled in, but lack runtime configuration even for the ::1 loopback
address.
This patch changes the detection logic to use a new method. It does it
by attempting to bind a socket to the appropriate loopback address. That
should ensure the hosts loopback interface is fully set up. In an effort
to avoid silently skipping the test on too many hosts, the test is
fairly strict about the kind of error it expects in these cases -- it
will only skip the test when receiving EADDRNOTAVAIL. If we find other
error codes that can be reasonably returned in these situations, we can
add more of them.
The (small) change in TCPSocket.cpp is to ensure that the code correctly
propagates the error received from the OS.
For developing the OS itself there exists an "internal" variant of
each SDK. This patch adds support for these SDK directories to the
XcodeSDK class.
Differential Revision: https://reviews.llvm.org/D78675
LLDB relies on empty FileSpecs being invalid files, for example, they
don't exists. Currently this assumption does not always hold during
reproducer replay, because we pass the result of GetPath to the VFS.
This is an empty string, which the VFS converts to an absolute directory
by prepending the current working directory, before looking it up in the
YAML mapping. This means that an empty FileSpec will exist when the
current working directory does. This breaks at least one test
(TestAddDsymCommand.py) when ran from replay.
This patch special cases empty FileSpecs and returns a sensible result
before calling GetPath and forwarding the call.
Differential revision: https://reviews.llvm.org/D77351
This is how it should've been and brings it more in line with
std::string_view. There should be no functional change here.
This is mostly mechanical from a custom clang-tidy check, with a lot of
manual fixups. It uncovers a lot of minor inefficiencies.
This doesn't actually modify StringRef yet, I'll do that in a follow-up.
Summary:
A *.cpp file header in LLDB (and in LLDB) should like this:
```
//===-- TestUtilities.cpp -------------------------------------------------===//
```
However in LLDB most of our source files have arbitrary changes to this format and
these changes are spreading through LLDB as folks usually just use the existing
source files as templates for their new files (most notably the unnecessary
editor language indicator `-*- C++ -*-` is spreading and in every review
someone is pointing out that this is wrong, resulting in people pointing out that this
is done in the same way in other files).
This patch removes most of these inconsistencies including the editor language indicators,
all the different missing/additional '-' characters, files that center the file name, missing
trailing `===//` (mostly caused by clang-format breaking the line).
Reviewers: aprantl, espindola, jfb, shafik, JDevlieghere
Reviewed By: JDevlieghere
Subscribers: dexonsmith, wuzish, emaste, sdardis, nemanjai, kbarton, MaskRay, atanasyan, arphaman, jfb, abidh, jsji, JDevlieghere, usaxena95, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D73258
Summary:
Many of our tests need to initialize certain subsystems/plugins of LLDB such as
`FileSystem` or `HostInfo` by calling their static `Initialize` functions before the
test starts and then calling `::Terminate` after the test is done (in reverse order).
This adds a lot of error-prone boilerplate code to our testing code.
This patch adds a RAII called SubsystemRAII that ensures that we always call
::Initialize and then call ::Terminate after the test is done (and that the Terminate
calls are always in the reverse order of the ::Initialize calls). It also gets rid of
all of the boilerplate that we had for these calls.
Per-fixture initialization is still not very nice with this approach as it would
require some kind of static unique_ptr that gets manually assigned/reseted
from the gtest SetUpTestCase/TearDownTestCase functions. Because of that
I changed all per-fixture setup to now do per-test setup which can be done
by just having the SubsystemRAII as a member of the test fixture. This change doesn't
influence our normal test runtime as LIT anyway runs each test case separately
(and the Initialize/Terminate calls are anyway not very expensive). It will however
make running all tests in a single executable slightly slower.
Reviewers: labath, JDevlieghere, martong, espindola, shafik
Reviewed By: labath
Subscribers: mgorny, rnkovacs, emaste, MaskRay, abidh, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D71630
Summary:
This patch factors out File as an abstract base
class and moves most of its actual functionality into
a subclass called NativeFile. In the next patch,
I'm going to be adding subclasses of File that
don't necessarily have any connection to actual OS files,
so they will not inherit from NativeFile.
This patch was split out as a prerequisite for
https://reviews.llvm.org/D68188
Reviewers: JDevlieghere, jasonmolenda, labath
Reviewed By: labath
Subscribers: lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D68317
llvm-svn: 373564
Summary:
This patch converts FileSystem::Open from this prototype:
Status
Open(File &File, const FileSpec &file_spec, ...);
to this one:
llvm::Expected<std::unique_ptr<File>>
Open(const FileSpec &file_spec, ...);
This is beneficial on its own, as llvm::Expected is a more modern
and recommended error type than Status. It is also a necessary step
towards https://reviews.llvm.org/D67891, and further developments
for lldb_private::File.
Reviewers: JDevlieghere, jasonmolenda, labath
Reviewed By: labath
Subscribers: mgorny, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D67996
llvm-svn: 373003
Adrian added a sanity check to the socket tests to ensure the $TMPDIR is
not too long for a socket. While this is great for diagnosing the
problem it doesn't really solve the problem for environment where you
have no control over that variable such as in CI. I propose to just skip
the test in that case similar to what we do for tests that rely on
targets that are not currently build, etc.
Differential revision: https://reviews.llvm.org/D67972
llvm-svn: 372774
lvm_private::File::GetStream() can fail if m_options == 0
It's not clear from the header a File created with a descriptor will be
not be usable by many parts of LLDB unless SetOptions is also called,
but it is.
This is because those parts of LLDB rely on GetStream() to use the
file, and that in turn relies on calling fdopen on the descriptor. When
calling fdopen, GetStream relies on m_options to determine the access
mode. If m_options has never been set, GetStream() will fail.
This patch adds options as a required argument to File::SetDescriptor
and the corresponding constructor.
Patch by: Lawrence D'Anna
Differential revision: https://reviews.llvm.org/D67792
llvm-svn: 372652
Adrian Prantl