Before this commit memory reference identifiers have only been unique per
basic block, but not per (non-affine) ScopStmt. This commit now uses the
MemoryAccess base pointer to uniquely identify each Memory access.
llvm-svn: 252200
For generating scalar writes of non-affine subregions, all except phi
writes are generated in the exit block. The phi writes are generated in
the incoming block for which we errornously used the same BBMap. This
can conflict if a value for one block is synthesized, and then reused
for another block which is not dominated by the first block. This is
fixed by using block-specific BBMaps for phi writes.
llvm-svn: 252172
An incoming value from a block the is not inside the scop is an
external use, even if the phi is inside the scop. A previous fix in
r251208 did not apply if the phi is inside a non-affine subregion. We
move the check for this phi case before the non-affine subregion check.
llvm-svn: 252157
To simplify and correct the preloading of a base pointer origin, e.g.,
the base pointer for the current indirect invariant load, we now just
check if there is an invariant access class that involves the base
pointer of the current class.
llvm-svn: 251962
We do not need to model read-only statements in the SCoP as they will
not cause any side effects that are visible to the outside anyway.
Removing them should safe us time and might even simplify the ASTs we
generate.
Differential Revision: http://reviews.llvm.org/D14272
llvm-svn: 251948
If a base pointer of a preloaded value has a base pointer origin, thus it is
an indirect invariant load, we have to make sure the base pointer origin is
preloaded first.
llvm-svn: 251946
ScalarEvolution doesn't allow the operands of an AddRec to be variant in the
loop of the AddRec. When we rewrite parameter SCEVs it might seem like the
new SCEV violates this property and ScalarEvolution will trigger an
assertion. To avoid this we move the start part out of an AddRec when we
rewrite it, thus avoid the operands to be possibly variant completely.
llvm-svn: 251945
If a base pointer load is preloaded, we have change the base pointer of
the derived SAI. However, as the derived SAI relationship is is
coarse grained, we need to check if we actually preloaded the base
pointer or a different element of the base pointer SAI array.
llvm-svn: 251881
In some cases different memory accesses access the very same array using a
different multi-dimensional array layout where the same dimensions have
different sizes. Instead of asserting when encountering this issue, we
gracefully bail out for this scop.
This fixes llvm.org/PR25252
llvm-svn: 251791
We remove -polly-detect-unprofitable and -polly-no-early-exit. Both have been
superseeded by -polly-process-unprofitable and were only kept as aliases for
our buildbots to continue to work. As all buildbots have been moved to the new
options, we can now remove the old ones for good.
llvm-svn: 251787
These maps are only needed during the construction of a single region statement.
Clearing them is important, as we otherwise get an assert in case some of the
referenced values are erased before the RegionGenerator is deleted.
llvm-svn: 251341
Volatile or atomic memory accesses are currently not supported. Neither did
we think about any special handling needed nor do we support the unknown
instructions the alias set tracker turns them into sometimes. Before this
patch, us not supporting unkown instructions in an alias set caused the
following assertion failures:
Assertion `AG.size() > 1 && "Alias groups should contain at least two accesses"'
failed
llvm-svn: 251234
When verifying if a scop is still valid we rerun all analysis, but did not
update DetectionContextMap. This change ensures that information, e.g. about
non-affine regions, is correctly updated
llvm-svn: 251227
the size expression.
We previously only checked if the size expression is 'undef', but allowed size
expressions of the form 'undef * undef' by accident. After this change we now
require size expressions to be affine which implies no 'undef' appears anywhere
in the expression.
llvm-svn: 251225
of the Region are external.
During code generation we split off the parts of the PHI nodes in the entry
block, which have incoming blocks that are not part of the region. As these
split-off PHI nodes then are external uses, we consequently also need to model
these uses in ScopInfo.
llvm-svn: 251208
Such PHI nodes can not only appear in the ExitBlock of the Scop, but indeed
any scalar PHI node above the scop and used in the scop is modeled as scalar
read access.
llvm-svn: 251198
This change adds code to directly code-generate multi-exit PHI nodes, instead
of trying to reuse the EscapeMap infrastructure for this. Using escape maps
adds a level of indirection that is hard to understand and - more importantly -
breaks in certain cases.
Specifically, the original code relied on simplifyRegion() to split the original
PHI node in two PHI nodes, one merging the values coming from within the scop
and a second that merges the first PHI node with the values that come from
outside the scop. To generate code the first PHI node is then just handled like
any other in-scop value that is used somewhere outside the scop. This fails for
the case where all values from inside the scop are identical, as the first PHI
node is in such cases automatically simplified and eliminated by LLVM right at
construction. As a result, there is no instruction that can be pass to the
EscapeMap handling, which means the references in the second PHI node are not
updated and may still reference values from within the original scop that do not
dominate it.
Our new code iterates directly over all modeled ScopArrayInfo objects that
represent multi-exit PHI nodes and generates code for them without relying on
the EscapeMap infrastructure. Hence, it works also for the case where the first
PHI node is eliminated.
llvm-svn: 251191
We isolate full tiles from partial tiles to be able to, for example, vectorize
loops with parametric lower and/or upper bounds.
If we use -polly-vectorizer=stripmine, we can see execution-time improvements:
correlation from 1m7361s to 0m5720s (-67.05 %), covariance from 1m5561s to
0m5680s (-63.50 %), ary3 from 2m3201s to 1m2361s (-46.72 %), CrystalMk from
8m5565s to 7m4285s (-13.18 %).
The current full/partial tile separation increases compile-time more than
necessary. As a result, we see in compile time regressions, for example, for 3mm
from 0m6320s to 0m9881s (56.34%). Some of this compile time increase is expected
as we generate more IR and consequently more time is spent in the LLVM backends.
However, a first investiagation has shown that a larger portion of compile time
is unnecessarily spent inside Polly's parallelism detection and could be
eliminated by propagating existing knowledge about vector loop parallelism.
Before enabling -polly-vectorizer=stripmine by default, it is necessary to
address this compile-time issue.
Contributed-by: Roman Gareev <gareevroman@gmail.com>
Reviewers: jdoerfert, grosser
Subscribers: grosser, #polly
Differential Revision: http://reviews.llvm.org/D13779
llvm-svn: 250809
New values were always synthesized in the block of the instruction
that needed them. This is incorrect for PHI node whose' value must be
defined in the respective incoming block. This patch temporarily moves
the builder's insert point to the incoming block while synthesizing phi
node arguments.
This fixes PR25241 (http://llvm.org/bugs/show_bug.cgi?id=25241)
llvm-svn: 250693
There are several different kinds of constants that could occur in a
branch condition, however we can only handle the most interesting one
namely constant integers. To this end we have to treat others as
non-affine.
This fixes bug 25244.
llvm-svn: 250669
We build the schedule based on a traversal of the region and accumulate
information for each loop in it. The total schedule is associated with the
loop surrounding the SCoP, though it can happen that there are blocks in the
SCoP which are part of loops that are only partially in the SCoP. Instead of
associating information with them (they are not part of the SCoP and
consequently are not modeled) we have to associate the schedule information
with the surrounding loop if any.
This fixes bug 25240.
llvm-svn: 250668
Accesses that have a relative offset (in bytes) that is not divisible
by the type size (in bytes) will be represented as empty in the SCoP
description. This is on its own not good but it also crashed the
invariant load hoisting. This patch will fix the latter problem while
the former should be addressed too.
This fixes bug 25236.
llvm-svn: 250664
If the base pointer of a load is invariant and defined in the SCoP but
not loaded we cannot hoist the load as we would not hoist the base
pointer definition.
This fixes bug 25237.
llvm-svn: 250663
Sorting is replaced by a demand driven code generation that will pre-load a
value when it is needed or, if it was not needed before, at some point
determined by the order of invariant accesses in the program. Only in very
little cases this demand driven pre-loading will kick in, though it will
prevent us from generating faulty code. An example where it is needed is
shown in:
test/ScopInfo/invariant_loads_complicated_dependences.ll
Invariant loads that appear in parameters but are not on the top-level (e.g.,
the parameter is not a SCEVUnknown) will now be treated correctly.
Differential Revision: http://reviews.llvm.org/D13831
llvm-svn: 250655
Polly can now be used as a analysis only tool as long as the code
generation is disabled. However, we do not have an alternative to the
independent blocks pass in place yet, though in the relevant cases
this does not seem to impact the performance much. Nevertheless, a
virtual alternative that allows the same transformations without
changing the input region will follow shortly.
llvm-svn: 250652
Expressing this in terms of BlockGenerator::getOrCreateAlloca(const
ScopArrayInfo *Array) does not work as the MemoryAccess BasePtr is in case of
invariant load hoisting different to the ScopArrayInfo BasePtr. Until this is
investigated and fixed, we move back to code that just uses the baseptr of
MemoryAccess.
llvm-svn: 250637
This allows the caller to get the alloca locations of an array without the
need to thank if Array is a PHI or a non-PHI Array. We directly make use of this
in BlockGenerator::getOrCreateAlloca(MemoryAccess &Access).
llvm-svn: 250628
Other places (e.g. hoistInvariantLoads) assume that an empty lookup
will return nullptr. The situation can currently not arise because
MemoryAccesses are not removed before hoistInvariantLoads.
llvm-svn: 250627
While clang-format takes care that the line-length is not surpassed, the
resulting comments sometimes look not optimal. We re-flow the text in the
comment to avoid these ugly single-word lines.
llvm-svn: 250626
Instead of generating implicit loads within basic blocks, put them
before the instructions of the statment itself, including non-affine
subregions. The region's entry node is dominating all blocks in the
region and therefore the loaded value will be available there.
Implicit writes in block-stmts were already stored back at the end of
the block. Now, also generate the stores of non-affine subregions when
leaving the statement, i.e. in the exiting block.
This change is required for array-mapped implicits ("De-LICM") to
ensure that there are no dependencies of demoted scalars within
statments. Statement load all required values, operator on copied in
registers, and then write back the changed value to the demoted memory.
Lifetimes analysis within statements becomes unecessary.
Differential Revision: http://reviews.llvm.org/D13487
llvm-svn: 250625
Accesses for exit node phis will be handled separately by
buildPHIAccesses if there is more than one exiting edge,
buildScalarDependences does not need to create additional SCALAR
accesses.
This is a corrected version of r250517, which was reverted in r250607.
Differential Revision: http://reviews.llvm.org/D13848
llvm-svn: 250622
Instead of checking at code generation time for each ScopStmt if a scalar has
external uses, we just iterate over the ScopArrayInfo descriptions we have and
check each of these for possible external uses.
Besides being somehow clearer, this approach has the benefit that we will always
create valid LLVM-IR even in case we disable the code generation of ScopStmt
bodies e.g. for testing purposes.
llvm-svn: 250608
Tobias Grosser