This updates check for double precision zero floating point constant to allow
use of instruction with immediate value rather than temporary register.
Currently "a == 0.0", where "a" is of "double" type generates:
vmov.i32 d16, #0x0
vcmpe.f64 d0, d16
With this change it becomes:
vcmpe.f64 d0, #0
Patch by Sergey Dmitrouk.
llvm-svn: 220486
The previous code had a few problems, motivating the choices here.
1. It could create instructions clobbering CPSR, but the incoming MachineInstr
didn't reflect this. A potential source of corruption. This is why the patch
has a new PseudoInst for before lowering.
2. Similarly, there was some code to handle the incoming instruction not being
ARMCC::AL, but this would have caused massive problems if it was actually
invoked when a complex offset needing more than one instruction was requested.
3. It wasn't designed to handle unaligned pointers (or offsets). These should
probably be minimised anyway, but the code needs to deal with them properly
regardless.
4. It had some rather dubious ad-hoc code to avoid calling
emitThumbRegPlusImmediate, a function which should be designed to do precisely
this job.
We seem to cover the common cases correctly now, and hopefully can enhance
emitThumbRegPlusImmediate to handle any extra optimisations we need to add in
future.
llvm-svn: 220236
The current instruction selection patterns for SMULW[BT] and SMLAW[BT]
are incorrect. These instructions multiply a 32-bit and a 16-bit value
(both signed) and return the top 32 bits of the 48-bit result. This
preserves the 16 bits of overflow, whereas the patterns they currently
match truncate the result to 16 bits then sign extend.
To select these instructions, we would need to match an ISD::SMUL_LOHI,
a sign extend, two shifts and an or. There is no way to match SMUL_LOHI
in an instruction pattern as it defines multiple values, so this would
have to be done in C++. I have raised
http://llvm.org/bugs/show_bug.cgi?id=21297 to cover allowing correct
selection of these instructions.
This fixes http://llvm.org/bugs/show_bug.cgi?id=19396
llvm-svn: 220196
Thumb1 has legitimate reasons for preferring 32-bit alignment of types
i1/i8/i16, since the 16-bit encoding of "add rD, sp, #imm" requires #imm to be
a multiple of 4. However, this is a trade-off betweem code size and RAM usage;
the DataLayout string is not the best place to represent it even if desired.
So this patch removes the extra Thumb requirements, hopefully making ARM and
Thumb completely compatible in this respect.
llvm-svn: 219734
There's no hard requirement on LLVM to align local variable to 32-bits, so the
Thumb1 frame handling needs to be able to deal with variables that are only
naturally aligned without falling over.
llvm-svn: 219733
Before, ARM and Thumb mode code had different preferred alignments, which could
lead to some rather unexpected results. There's justification for reducing it
from the default 64-bits (wasted space), but I don't think there is for going
below 32-bits.
There's no actual ABI change here, just to reassure people.
llvm-svn: 219719
This reverts commit r218918, effectively reapplying r218914 after fixing
an Ocaml bindings test and an Asan crash. The root cause of the latter
was a tightened-up check in `DILexicalBlock::Verify()`, so I'll file a
PR to investigate who requires the loose check (and why).
Original commit message follows.
--
This patch addresses the first stage of PR17891 by folding constant
arguments together into a single MDString. Integers are stringified and
a `\0` character is used as a separator.
Part of PR17891.
Note: I've attached my testcases upgrade scripts to the PR. If I've
just broken your out-of-tree testcases, they might help.
llvm-svn: 219010
That commit was introduced in order to help investigate a problem in ARM
codegen breaking from commit 202304 (Add a limit to the heuristic that register
allocates instructions in local order). Recent analisys indicated that the
problem no longer exists, so I'm reverting this change.
See PR18996.
llvm-svn: 218981
This patch addresses the first stage of PR17891 by folding constant
arguments together into a single MDString. Integers are stringified and
a `\0` character is used as a separator.
Part of PR17891.
Note: I've attached my testcases upgrade scripts to the PR. If I've
just broken your out-of-tree testcases, they might help.
llvm-svn: 218914
As with x86 and AArch64, certain situations can arise where we need to spill
CPSR in the middle of a calculation. These should be avoided where possible
(MRS/MSR is rather expensive), which ARM is actually better at than the other
two since it tries to Glue defs to uses, but as a last ditch effort, copying is
better than crashing.
rdar://problem/18011155
llvm-svn: 218789
argument of the llvm.dbg.declare/llvm.dbg.value intrinsics.
Previously, DIVariable was a variable-length field that has an optional
reference to a Metadata array consisting of a variable number of
complex address expressions. In the case of OpPiece expressions this is
wasting a lot of storage in IR, because when an aggregate type is, e.g.,
SROA'd into all of its n individual members, the IR will contain n copies
of the DIVariable, all alike, only differing in the complex address
reference at the end.
By making the complex address into an extra argument of the
dbg.value/dbg.declare intrinsics, all of the pieces can reference the
same variable and the complex address expressions can be uniqued across
the CU, too.
Down the road, this will allow us to move other flags, such as
"indirection" out of the DIVariable, too.
The new intrinsics look like this:
declare void @llvm.dbg.declare(metadata %storage, metadata %var, metadata %expr)
declare void @llvm.dbg.value(metadata %storage, i64 %offset, metadata %var, metadata %expr)
This patch adds a new LLVM-local tag to DIExpressions, so we can detect
and pretty-print DIExpression metadata nodes.
What this patch doesn't do:
This patch does not touch the "Indirect" field in DIVariable; but moving
that into the expression would be a natural next step.
http://reviews.llvm.org/D4919
rdar://problem/17994491
Thanks to dblaikie and dexonsmith for reviewing this patch!
Note: I accidentally committed a bogus older version of this patch previously.
llvm-svn: 218787
argument of the llvm.dbg.declare/llvm.dbg.value intrinsics.
Previously, DIVariable was a variable-length field that has an optional
reference to a Metadata array consisting of a variable number of
complex address expressions. In the case of OpPiece expressions this is
wasting a lot of storage in IR, because when an aggregate type is, e.g.,
SROA'd into all of its n individual members, the IR will contain n copies
of the DIVariable, all alike, only differing in the complex address
reference at the end.
By making the complex address into an extra argument of the
dbg.value/dbg.declare intrinsics, all of the pieces can reference the
same variable and the complex address expressions can be uniqued across
the CU, too.
Down the road, this will allow us to move other flags, such as
"indirection" out of the DIVariable, too.
The new intrinsics look like this:
declare void @llvm.dbg.declare(metadata %storage, metadata %var, metadata %expr)
declare void @llvm.dbg.value(metadata %storage, i64 %offset, metadata %var, metadata %expr)
This patch adds a new LLVM-local tag to DIExpressions, so we can detect
and pretty-print DIExpression metadata nodes.
What this patch doesn't do:
This patch does not touch the "Indirect" field in DIVariable; but moving
that into the expression would be a natural next step.
http://reviews.llvm.org/D4919
rdar://problem/17994491
Thanks to dblaikie and dexonsmith for reviewing this patch!
llvm-svn: 218778
Currently, we only codegen the VRINT[APMXZR] and VCVT[BT] instructions
when targeting ARMv8, but they are actually present on any target with
FP-ARMv8. Note that FP-ARMv8 is called FPv5 when is is part of an
M-profile core, but they have the same instructions so we model them
both as FPARMv8 in the ARM backend.
llvm-svn: 218763
The Cortex-M7 has 3 options for its FPU: none, FPv5-SP-D16 and
FPv5-DP-D16. FPv5 has the same instructions as FP-ARMv8, so it can be
modelled using the same target feature, and all double-precision
operations are already disabled by the fp-only-sp target features.
llvm-svn: 218747
This testcase was not testing what it meant: because there were only two checks for
dmb {{ish}} in the second function, it could have missed a bug where one of the three
required dmb {{ish}} became dmb {{ishst}}. As I was fixing it, I also added
CHECK-LABELs to make it a bit less brittle.
llvm-svn: 218341
The fix is slightly different then x86 (see r216117) because the number of values
attached to a return can vary even for a single returned value (e.g., f64 yields
two returned values).
<rdar://problem/18352998>
llvm-svn: 218076
Summary:
This patch was originally in D5304 (I could not find a way to reopen that revision).
It was accepted, commited and broke the build bots because the overloading of
the constructor of ArrayRef for braced initializer lists is not supported by all
toolchains. I then reverted it, and propose this fixed version that uses a plain
C array instead in makeDMB (that array is then converted implicitly to an
ArrayRef, but that is not behind an ifdef). Could someone confirm me whether
initialization lists for plain C arrays are supported by every toolchain used
to build llvm ? Otherwise I can just initialize the array in the old way:
args[0] = ...; .. ; args[5] = ...;
Below is the description of the original patch:
```
I had only tested this code for ARMv7 and ARMv8. This patch adds several
fallback paths if the processor does not support dmb ish:
- dmb sy if a cortex-M with support for dmb
- mcr p15, #0, r0, c7, c10, #5 for ARMv6 (special instruction equivalent to a DMB)
These fallback paths were chosen based on the code for fence seq_cst.
Thanks to luqmana for having noticed this bug.
```
Test Plan: Added more cases to atomic-load-store.ll + make check-all
Reviewers: jfb, t.p.northover, luqmana
Subscribers: llvm-commits, aemerson
Differential Revision: http://reviews.llvm.org/D5386
llvm-svn: 218066
It is breaking the build on the buildbots but works fine on my machine, I revert
while trying to understand what happens (it appears to depend on the compiler used
to build, I probably used a C++11 feature that is not perfectly supported by some
of the buildbots).
This reverts commit feb3176c4d006f99af8b40373abd56215a90e7cc.
llvm-svn: 217973
Summary:
I had only tested this code for ARMv7 and ARMv8. This patch adds several
fallback paths if the processor does not support dmb ish:
- dmb sy if a cortex-M with support for dmb
- mcr p15, #0, r0, c7, c10, #5 for ARMv6 (special instruction equivalent to a DMB)
These fallback paths were chosen based on the code for fence seq_cst.
Thanks to luqmana for having noticed this bug.
Test Plan: Added more cases to atomic-load-store.ll + make check-all
Reviewers: jfb, t.p.northover, luqmana
Subscribers: aemerson, llvm-commits
Differential Revision: http://reviews.llvm.org/D5304
llvm-svn: 217965
The only Thumb-1 multi-store capable of using LR is the PUSH instruction, which
translates to STMDB, so we shouldn't convert STMIAs.
Patch by Sergey Dmitrouk.
llvm-svn: 217498
While working on a Thumb-2 code size optimization I just realized that we don't have any regression tests for it.
So here's a first test case, I plan to increase the coverage over time.
llvm-svn: 216728
This reverts commit r215862 due to nightly failures. Will work on getting a
reduced test case, but I wanted to get our bots green in the meantime.
llvm-svn: 216325
There's no need to do this if the user doesn't call va_start. In the
future, we're going to have thunks that forward these register
parameters with musttail calls, and they won't need these spills for
handling va_start.
Most of the test suite changes are adding va_start calls to existing
tests to keep things working.
llvm-svn: 216294
instruction from ARMInstrInfo to ARMBaseInstrInfo.
That way, thumb mode can also benefit from the advanced copy optimization.
<rdar://problem/12702965>
llvm-svn: 216274
The FPv4-SP floating-point unit is generally referred to as
single-precision only, but it does have double-precision registers and
load, store and GPR<->DPR move instructions which operate on them.
This patch enables the use of these registers, the main advantage of
which is that we now comply with the AAPCS-VFP calling convention.
This partially reverts r209650, which added some AAPCS-VFP support,
but did not handle return values or alignment of double arguments in
registers.
This patch also adds tests for Thumb2 code generation for
floating-point instructions and intrinsics, which previously only
existed for ARM.
llvm-svn: 216172
advanced copy optimization.
This is the final step patch toward transforming:
udiv r0, r0, r2
udiv r1, r1, r3
vmov.32 d16[0], r0
vmov.32 d16[1], r1
vmov r0, r1, d16
bx lr
into:
udiv r0, r0, r2
udiv r1, r1, r3
bx lr
Indeed, thanks to this patch, this optimization is able to look through
vmov.32 d16[0], r0
vmov.32 d16[1], r1
and is able to rewrite the following sequence:
vmov.32 d16[0], r0
vmov.32 d16[1], r1
vmov r0, r1, d16
into simple generic GPR copies that the coalescer managed to remove.
<rdar://problem/12702965>
llvm-svn: 216144
On pre-v6 hardware, 'MOV lo, lo' gives undefined results, so such copies need to
be avoided. This patch trades simplicity for implementation time at the expense
of performance... As they say: correctness first, then performance.
See http://lists.cs.uiuc.edu/pipermail/llvmdev/2014-August/075998.html for a few
ideas on how to make this better.
llvm-svn: 216138
the isRegSequence property.
This is a follow-up of r215394 and r215404, which respectively introduces the
isRegSequence property and uses it for ARM.
Thanks to the property introduced by the previous commits, this patch is able
to optimize the following sequence:
vmov d0, r2, r3
vmov d1, r0, r1
vmov r0, s0
vmov r1, s2
udiv r0, r1, r0
vmov r1, s1
vmov r2, s3
udiv r1, r2, r1
vmov.32 d16[0], r0
vmov.32 d16[1], r1
vmov r0, r1, d16
bx lr
into:
udiv r0, r0, r2
udiv r1, r1, r3
vmov.32 d16[0], r0
vmov.32 d16[1], r1
vmov r0, r1, d16
bx lr
This patch refactors how the copy optimizations are done in the peephole
optimizer. Prior to this patch, we had one copy-related optimization that
replaced a copy or bitcast by a generic, more suitable (in terms of register
file), copy.
With this patch, the peephole optimizer features two copy-related optimizations:
1. One for rewriting generic copies to generic copies:
PeepholeOptimizer::optimizeCoalescableCopy.
2. One for replacing non-generic copies with generic copies:
PeepholeOptimizer::optimizeUncoalescableCopy.
The goals of these two optimizations are slightly different: one rewrite the
operand of the instruction (#1), the other kills off the non-generic instruction
and replace it by a (sequence of) generic instruction(s).
Both optimizations rely on the ValueTracker introduced in r212100.
The ValueTracker has been refactored to use the information from the
TargetInstrInfo for non-generic instruction. As part of the refactoring, we
switched the tracking from the index of the definition to the actual register
(virtual or physical). This one change is to provide better consistency with
register related APIs and to ease the use of the TargetInstrInfo.
Moreover, this patch introduces a new helper class CopyRewriter used to ease the
rewriting of generic copies (i.e., #1).
Finally, this patch adds a dead code elimination pass right after the peephole
optimizer to get rid of dead code that may appear after rewriting.
This is related to <rdar://problem/12702965>.
Review: http://reviews.llvm.org/D4874
llvm-svn: 216088
LLVM generates illegal `rbit r0, #352` instruction for rbit intrinsic.
According to ARM ARM, rbit only takes register as argument, not immediate.
The correct instruction should be rbit <Rd>, <Rm>.
The bug was originally introduced in r211057.
Differential Revision: http://reviews.llvm.org/D4980
llvm-svn: 216064
Note: This was originally reverted to track down a buildbot error. This commit
exposed a latent bug that was fixed in r215753. Therefore it is reapplied
without any modifications.
I run it through SPEC2k and SPEC2k6 for AArch64 and it didn't introduce any new
regeressions.
Original commit message:
This changes the order in which FastISel tries to materialize a constant.
Originally it would try to use a simple target-independent approach, which
can lead to the generation of inefficient code.
On X86 this would result in the use of movabsq to materialize any 64bit
integer constant - even for simple and small values such as 0 and 1. Also
some very funny floating-point materialization could be observed too.
On AArch64 it would materialize the constant 0 in a register even the
architecture has an actual "zero" register.
On ARM it would generate unnecessary mov instructions or not use mvn.
This change simply changes the order and always asks the target first if it
likes to materialize the constant. This doesn't fix all the issues
mentioned above, but it enables the targets to implement such
optimizations.
Related to <rdar://problem/17420988>.
llvm-svn: 216006
Renato Golin