AC_CHECK_FUNCS seeks a symbol only in libs. We should check the declaration in string.h.
FIXME: I have never seen mingw(s) have strerror_s() (not _strerror_s()).
FIXME: Autoconf/CMake may seek strerror_s() with the definition MINGW_HAS_SECURE_API in future.
llvm-svn: 125172
Update the cmake and autoconf build system to compile polly
as a shared library if it is checked out into tools/polly. In case
polly is not checked out, nothing changes.
This models the way clang can be added to llvm if checked out to tools/clang.
Also rebuild configure.
Patch contributed by ether.
llvm-svn: 117755
strange packaging environments. The primary result of this is to expose
a (normally empty) CLANG_RESOURCE_DIR string in the autoconf and CMake builds.
This will in turn be used by a subsequent commit to Clang.
Regenerated configure and config.h.in thanks to Nick. =D
llvm-svn: 116802
been MC-ized for assembly printing. MSP430 is mostly so, but still has the
asm printer and lowering code in the printer subdir for the moment.
llvm-svn: 115360
NOTE: 2nd part changeset for cfe trunk to follow.
*** PRE-PATCH ISSUES ADDRESSED
- clang api docs fail build from objdir
- clang/llvm api docs collide in install PREFIX/
- clang/llvm main docs collide in install
- clang/llvm main docs have full of hard coded destination
assumptions and make use of absolute root in static html files;
namely CommandGuide tools hard codes a website destination
for cross references and some html cross references assume
website root paths
*** IMPROVEMENTS
- bumped Doxygen from 1.4.x -> 1.6.3
- splits llvm/clang docs into 'main' and 'api' (doxygen) build trees
- provide consistent, reliable doc builds for both main+api docs
- support buid vs. install vs. website intentions
- support objdir builds
- document targets with 'make help'
- correct clean and uninstall operations
- use recursive dir delete only where absolutely necessary
- added call function fn.RMRF which safeguards against botched 'rm -rf';
if any target (or any variable is evaluated) which attempts
to remove any dirs which match a hard-coded 'safelist', a verbose
error will be printed and make will error-stop.
llvm-svn: 103213
gets placed inside a main function, and should not itself be a main
function. This is silently hidden in GCC-hosted builds because the
inner main looks like a nested function declaration, which GCC supports.
In builds with compilers which do not support nested functions (by default),
this was causing an error, which caused these autoconf checks to fail,
leaving their options disabled.
This fixes test/Feature/load_module.ll on x86_64-unknown-linux-gnu
llvm-gcc selfhost builds, among other things.
This also includes a regenerated configure, as the diff is small and telling.
llvm-svn: 102288
in r86005 and unintentionally changed the default from -O3 to -O2.
- It's odd the things automated perf testing turns up! :)
- Also, the configure diff is messed up slightly. It looks like someone either
didn't regenerate configure correctly (or I didn't), or autoconf has some
funnyness in it. Eric, any ideas?
This has been at -O2 for so long, that I am slightly nervous that this change
will uncover miscompiles of LLVM on other systems. If that is the case, I think
we should just set the default universally at -O3, and let developers/vendors
use -O3 if they want it and have tested it.
llvm-svn: 100941
now configures prerequisite projects individually but also ignores them in the
big project switch statement to avoid the incorrect warning.
llvm-svn: 99506
projects rely upon llvm-gcc, the LLVM test suite, and poolalloc. This ensures
that the aforementioned projects have their object trees created first so that
other projects can find their object trees when they themselves are configured.
llvm-svn: 98998
The MicroBlaze is a highly configurable 32-bit soft-microprocessor for
use on Xilinx FPGAs. For more information see:
http://www.xilinx.com/tools/microblaze.htmhttp://en.wikipedia.org/wiki/MicroBlaze
The current LLVM MicroBlaze backend generates assembly which can be
compiled using the an appropriate binutils assembler.
llvm-svn: 96969
Comes in two parts:
1. Use --with-clang=path/to/clang/compiler to select an installed clang, or
--with-built-clang to have the makefiles use the clang which will be built
as the LLVM capable compiler. If neither is given, --with-built-clang will
be used if the Clang sources are checked out into the standard location
(tools/clang).
2. Use --with-llvmcc={llvm-gcc,clang,none} to specify which LLVM capable
compiler to use. If not given, then llvm-gcc will be used if available,
otherwise Clang.
Makefile support still to come.
Eric, Doug, Chris, seem reasonable?
llvm-svn: 96934
--enable-shared configure flag to have the tools linked shared. (2.7svn is just
$(LLVMVersion) so it'll change to "2.7" in the release.) Always link the
example programs shared to test that the shared library keeps working.
On my mac laptop, Debug libLLVM2.7svn.dylib is 39MB, and opt (for example) is
16M static vs 440K shared.
Two things are less than ideal here:
1) The library doesn't include any version information. Since we expect to break
the ABI with every release, this shouldn't be much of a problem. If we do
release a compatible 2.7.1, we may be able to hack its library to work with
binaries compiled against 2.7.0, or we can just ask them to recompile. I'm
hoping to get a real packaging expert to look at this for the 2.8 release.
2) llvm-config doesn't yet have an option to print link options for the shared
library. I'll add this as a subsequent patch.
llvm-svn: 96559
same effect that "host-only" used to have, but can be combined with other
targets. host-only is still available as a synonym but no longer documented.
llvm-svn: 82634
A include/llvm/ADT/iterator.cmake
U autoconf/configure.ac
--- Reverse-merging r80161 into '.':
U cmake/config-ix.cmake
--- Reverse-merging r80171 into '.':
U Makefile
--- Reverse-merging r80173 into '.':
U configure
U include/llvm/Config/config.h.in
--- Reverse-merging r80180 into '.':
A include/llvm/ADT/iterator.h.in
Despite common miscomceptions, iterator.h is alive and well. It broke the build
bots for several hours. And yet no one bothered to look at them.
Gabor and Doug, please review your changes and make sure that they actually
build before resubmitting them.
llvm-svn: 80197
initialization of all targets (InitializeAllTargets.h) or assembler
printers (InitializeAllAsmPrinters.h). This is a step toward the
elimination of relinked object files, so that we can build normal
archives.
llvm-svn: 73543
mutex support. LLVM_MULTITHREADED indicates (or will indicate) the ability to run LLVM itself across multiple threads, and requires atomics support.
llvm-svn: 72140
Configure was not actually regenerated, but the change last time only touched
this one line, so I'm being lazy and cheating by fixing it manually.
llvm-svn: 69453
Before there were two problems: (1) configure
turned "obj-c++" into "obj" in the langs line;
(2) the dejagnu library called it objc++ not
obj-c++.
Now the problem is that some of these tests don't
pass!
llvm-svn: 57167
runnable on the build machine.
There are a few bits that need built for the build environment (TableGen).
This patch builds those bits, and the associated libraries, for the build
environment as well as the (usual) host environment.
Thanks to Eric C. and Devang P. for pre-commit review.
llvm-svn: 56975
We will keep the old projects/llvm-test working for existing installs.
The changes to configure are made manually, since I lack autoconf-2.6. Someone
might want to run AutoGen.sh to see if that changes anything.
llvm-svn: 52675
using the minimum possible number of bytes. For little
endian targets run on little endian machines, apints are
stored in memory from LSB to MSB as before. For big endian
targets on big endian machines they are stored from MSB to
LSB which wasn't always the case before (if the target and
host endianness doesn't match values are stored according
to the host's endianness). Doing this requires knowing the
endianness of the host, which is determined when configuring -
thanks go to Anton for this. Only having access to little
endian machines I was unable to properly test the big endian
part, which is also the most complicated...
llvm-svn: 44796
--enable-expensive-checks allows the developer to enable runtime
checking that can greatly increase compile time. Currently it only
turns on _GLIBCXX_DEBUG. Other expensive debugging checks added later
should be controlled by this configure option.
This patch also updates llvm-config with a --cppflags option to inform
llvm-gcc how to build itself so that it is compatible with an llvm that
was built with _GLIBCXX_DEBUG.
llvm-svn: 37777
Add HAVE_PTHREAD to makefiles with support from configure and use it to
determine whether to build examples/ParallelJIT.
Patch by Anton Korobeynikov.
llvm-svn: 32054
premature, these libraries will be going away for the 2.0 release. Other
arrangements for profiling, gc, etc. should be made in the next few months.
llvm-svn: 31807
stands a chance of being compiled with a non C99 C compiler. The default
is enabled so you must specifically disable this feature if you want the
CBE output compiled with an older C compiler.
llvm-svn: 31461
Update ltld.[ch] to version 1.5.22.
Correct the notes about updating these tools (autoconf/README.TXT)
Add configure options for getting the correct option for including a whole
archive when linking.
llvm-svn: 29529
1. Get the path to the pwd binary (/bin/pwd usually) from configure.
2. Use that path to run pwd in all path variables set in Makefile.config.in
The hope is that these changes will resolve symlinks to physical paths. This
should work on all platforms where the binary pwd defaults to printing
physical paths. The shell version of pwd generally doesn't (it will print
the symlink path).
llvm-svn: 29381
have a compile-host version of "nm", not build-host. In order to effect this
we must use autoconf to determine the correct "nm" to use and propagate that
through the makefiles, through llvm-config and finally to GenLibDeps.pl as
an optional argument.
Patch contributed by Anton Korobeynikov. Thanks!
llvm-svn: 29368
Add configure checks for setjmp/longjmp for Chris. I can't believe this easy
PR has been outstanding for so long. If I don't get to something, please
remind me! :)
llvm-svn: 28686
are available. These libraries are used in lib/System and should be
included on the link line or if not available generate an error when
building lib/System.
llvm-svn: 28628
and is unlikely to change in future releases. This also simplifies the
parsing of the full and major llvm-gcc version numbers in the script.
llvm-svn: 28180
If we fail to find a required program, simply set that program to echo
out something that tells the user the situation. That is, instead of just
"true runtest" we now get "echo 'Skipped: runtest not found'".
llvm-svn: 27990
1. Assertions now default to on for all builds
2. If you want them disabled you must (a) --disable-assertions to configure
or DISABLE_ASSERTIONS=1 to make.
llvm-svn: 27548
Support detection of a "CVS" directory at configure time to distinguish
whether this is a release build or a "from tree" build. This knowledge is
used to set the defaults for --enable-optimzied and --enable-assertions
options.
llvm-svn: 27487
1. Check for Perl and only build llvm-config if its available.
2. Add some virtual components
3. Don't depend on "standard" location for Perl, but configured location
4. Document the tool with a POD file.
This version is now ready for testing by users.
llvm-svn: 27005
is a handy tool for users of LLVM who want to be able to quickly get
information about LLVM's configuration. It is intended to be used in the
command line of other tools. Documentation will be forthcoming in a
subsequent patch.
llvm-svn: 26952
* Add --enable-debug-runtime option, defaults to disabled
* Pass the new config var, DEBUG_RUNTIME, to Makefiles
* Don't use -Wa,-strip-debug if debug-runtime is enabled
llvm-svn: 24891
These patches make threading optional in LLVM. The configuration scripts are now
modified to accept a --disable-threads switch. If this is used, the Mutex class
will be implemented with all functions as no-op. Furthermore, linking against
libpthread will not be done. Finally, the ParallelJIT example needs libpthread
so its makefile was changed to always add -lpthread to the link line.
llvm-svn: 23003
GRAPHVIZ will contain the path to the program if its found (or "echo Graphviz"
if not) and the #define HAVE_GRAPHVIZ will be defined if its found.
llvm-svn: 22424
This patch completes the changes for making lli thread-safe. Here's the list
of changes:
* The Support/ThreadSupport* files were removed and replaced with the
MutexGuard.h file since all ThreadSupport* declared was a Mutex Guard.
The implementation of MutexGuard.h is now based on sys::Mutex which hides
its implementation and makes it unnecessary to have the -NoSupport.h and
-PThreads.h versions of ThreadSupport.
* All places in ExecutionEngine that previously referred to "Mutex" now
refer to sys::Mutex
* All places in ExecutionEngine that previously referred to "MutexLocker"
now refer to MutexGuard (this is frivolous but I believe the technically
correct name for such a class is "Guard" not a "Locker").
These changes passed all of llvm-test. All we need now are some test cases
that actually use multiple threads.
llvm-svn: 22404
* Check for availability of ffsll call in configure script
* Support ffs, ffsl, and ffsll conversion to constant value if the argument
is constant.
llvm-svn: 22027
script was defaulting the LLVMGCC variable to "llvm-gcc" if it couldn't
find llvm-gcc and --with-llvmgccdir was not specified. In this case, there
is no llvm-gcc available on the system so we shouldn't assume that the
user's path will find it any better than configure could. The fix is to
default it to an empty string. If LLVMGCC is empty, the makefiles will
avoid building things that depend on llvm-gcc and give a nice warning
message to that effect.
llvm-svn: 21953
--enable-target which can take values "all", "host-only" or a comma
separated list of target names (alpha,ia64,powerpc,skeleton,sparc,x86)
llvm-svn: 21447
options have been added to the configure script that control which targets
will be used. The options are:
--enable-target-this (default=disabled)
This will specify that the target corresponding to the build host is
the target that will be compiled/used. You can't use this with any of
the other options (they'll be ignored). This is what most people want.
--disable-target-x86 (default=enabled)
This will prevent the X86 target(s) from being compiled/used.
--disable-target-sparc (default=enabled)
This will prevent both SparcV8 and SparcV9 from being compiled/used.
--disable-target-powerpc (default=enabled)
This will prevent the PowerPC target from being compiled/used.
--disable-target-alpha (default=enabled)
This will prevent the Alpha target from being compiled/used.
--disable-target-ia64 (default=enabled)
This will prevent the IA64 target from being compiled/used.
Note that without any of these options, the default behavior is to build
all targets, as is the current practice.
All these options do is set up the substititution variable TARGETS_TO_BUILD
which contains the targets that should be compiled/used. The variable is
intended to be used in the makefiles. Those changes will come later.
llvm-svn: 21445
Bill Wendling