Correctly handles ref_addr depending on the Dwarf version. Emit Dwarf with
version from module flag.
TODO: turn on/off features depending on the Dwarf version.
llvm-svn: 185484
This changes the AddrPool infrastructure to enable it to hold
generic MCExpr expressions, not just MCSymbolRefExpr.
This is in preparation for supporting debug info for TLS variables
on PowerPC, where we need to describe the variable location using
a more complex expression than just MCSymbolRefExpr.
llvm-svn: 185459
This partially reverts r185202 and restores DIELabel to hold plain
MCSymbol references. Instead, we add a new subclass DIEExpr of
DIEValue that can hold generic MCExpr references.
This is in preparation for supporting debug info for TLS variables
on PowerPC, where we need to describe the variable location using
a more complex expression than just MCSymbolRefExpr.
llvm-svn: 185458
This is dead code since PIC16 was removed in 2010. The result was an odd mix,
where some parts would carefully pass it along and others would assert it was
zero (most of the object streamer for example).
llvm-svn: 185436
Fix up three tests - one that was relying on abbreviation number,
another relying on a location list in this case (& testing raw asm,
changed that to use dwarfdump on the debug_info now that that's where
the location is), and another which was added in r184368 - exposing a
bug in that fix that is exposed when we emit the location inline rather
than through a location list. Fix that bug while I'm here.
llvm-svn: 184387
We had been papering over a problem with location info for non-trivial
types passed by value by emitting their type as references (this caused
the debugger to interpret the location information correctly, but broke
the type of the function). r183329 corrected the type information but
lead to the debugger interpreting the pointer parameter as the value -
the debug info describing the location needed an extra dereference.
Use a new flag in DIVariable to add the extra indirection (either by
promoting an existing DW_OP_reg (parameter passed in a register) to
DW_OP_breg + 0 or by adding DW_OP_deref to an existing DW_OP_breg + n
(parameter passed on the stack).
llvm-svn: 184368
Rather than using the full power of target-specific addressing modes in
DBG_VALUEs with Frame Indicies, simply use Frame Index + Offset. This
reduces the complexity of debug info handling down to two
representations of values (reg+offset and frame index+offset) rather
than three or four.
Ideally we could ensure that frame indicies had been eliminated by the
time we reached an assembly or dwarf generation, but I haven't spent the
time to figure out where the FIs are leaking through into that & whether
there's a good place to convert them. Some FI+offset=>reg+offset
conversion is done (see PrologEpilogInserter, for example) which is
necessary for some SelectionDAG assumptions about registers, I believe,
but it might be possible to make this a more thorough conversion &
ensure there are no remaining FIs no matter how instruction selection
is performed.
llvm-svn: 184066
Seems we emit the parameter ordering number (spuriously named 'arg
number') in the debug info, so there's no need to search through the
variable list to figure out the parameter ordering. This implementation
does 'always' do the work, even in non-optimized debug info (the
previous implementation checked the existence of the 'variables' list on
the subprogram which is only present in optimized builds).
No intended functionality change.
llvm-svn: 183446
When a function is inlined we lazily construct the variables
representing the function's parameters. After that, we add any remaining
unused parameters.
If the function doesn't use all the parameters, or uses them out of
order, then the DWARF would produce them in that order, producing a
parameter order that doesn't match the source.
This fix causes us to always keep the arg variables at the start of the
variable list & in the original order from the source.
llvm-svn: 183297
Since the testing case uses ref_addr, which requires version 3+ to work,
we will solve the dwarf version issue first.
This patch also causes failures in one of the bots. I will update the patch
accordingly in my next attempt.
rdar://13926659
llvm-svn: 182867
from a different CU.
We used to print out an error message and fail to generate inlined_subroutine.
If we use ref_addr in the generated DWARF, the DWARF version should be 3 or
above.
rdar://13926659
llvm-svn: 182791
This is to fix PR15408 where an undefined symbol Lline_table_start1 is used.
Since we do not generate the debug_line section when .loc is used,
Lline_table_start1 is not emitted and we can't refer to it when calculating
at_stmt_list for a compile unit.
llvm-svn: 182344
This resolves the last of the PR14606 failures in the GDB 7.5 test
suite by implementing an optional name field for
DW_TAG_imported_modules/DIImportedEntities and using that to implement
C++ namespace aliases (eg: "namespace X = Y;").
llvm-svn: 182328
This provides basic functionality for imported declarations. For
subprograms and types some amount of lazy construction is supported (so
the definition of a function can proceed the using declaration), but it
still doesn't handle declared-but-not-defined functions (since we don't
generally emit function declarations).
Variable support is really rudimentary at the moment - simply looking up
the existing definition with no support for out of order (declaration,
imported_module, then definition).
llvm-svn: 181392
DIBuilder::createImportedDeclaration isn't fully plumbed through (note,
lacking in AsmPrinter/DwarfDebug support) but this seemed like a
sufficiently useful division of code to make the subsequent patch(es)
easier to follow.
llvm-svn: 181364
Apparently we didn't keep an association of Compile Unit metadata nodes
to DIEs so looking up that parental context failed & thus caused no
DW_TAG_imported_modules to be emitted at the CU scope. Fix this by
adding the mapping & sure up the test case to verify this.
llvm-svn: 181339
register-indirect address with an offset of 0.
It used to be that a DBG_VALUE is a register-indirect value if the offset
(operand 1) is nonzero. The new convention is that a DBG_VALUE is
register-indirect if the first operand is a register and the second
operand is an immediate. For plain registers use the combination reg, reg.
rdar://problem/13658587
llvm-svn: 180816
to determine whether or not we're on a darwin platform for debug code
emitting.
Solves the problem of a module with no triple on the command line
and no triple in the module using non-gdb ok features on darwin. Fix
up the member-pointers test to check the correct things for cross
platform (DW_FORM_flag is a good prefix).
Unfortunately no testcase because I have no ideas how to test something
without a triple and without a triple in the module yet check
precisely on two platforms. Ideas welcome.
llvm-svn: 180660
Clarify documentation and API to make the difference between register and
register-indirect addressed locations more explicit. Put in a comment
to point out that with the current implementation we cannot specify
a register-indirect location with offset 0 (a breg 0 in DWARF).
No functionality change intended.
rdar://problem/13658587
llvm-svn: 180641
This reverts commit r179840 with a fix to test/DebugInfo/two-cus-from-same-file.ll
I'm not sure why that test only failed on ARM & MIPS and not X86 Linux, even
though the debug info was clearly invalid on all of them, but this ought to fix
it.
llvm-svn: 179996
Adding another CU-wide list, in this case of imported_modules (since they
should be relatively rare, it seemed better to add a list where each element
had a "context" value, rather than add a (usually empty) list to every scope).
This takes care of DW_TAG_imported_module, but to fully address PR14606 we'll
need to expand this to cover DW_TAG_imported_declaration too.
llvm-svn: 179836
therefore not at all) of the pc or statement list. We also don't
need to emit the compilation dir so save so space and time
and don't bother.
Fix up the testcase accordingly and verify that we don't emit
the attributes or the items that they use.
llvm-svn: 179114
a relocation across sections. Do this for DW_AT_stmt list in the
skeleton CU and check the relocations in the debug_info section.
Add a FIXME for multiple CUs.
llvm-svn: 178969
There is a difference for FORM_ref_addr between DWARF 2 and DWARF 3+.
Since Eric is against guarding DWARF 2 ref_addr with DarwinGDBCompat, we are
still in discussion on how to handle this.
The correct solution is to update our header to say version 4 instead of version
2 and update tool chains as well.
rdar://problem/13559431
llvm-svn: 178806
the target system.
It was hard-coded to 4 bytes before. I can't get llvm to generate a
ref_addr on a reasonably sized testing case.
rdar://problem/13559431
llvm-svn: 178722
belongs to a different compile unit.
DW_FORM_ref_addr should be used for cross compile-unit reference.
When compiling a large application, we got a dwarfdump verification error where
abstract_origin points to nowhere.
This error can't be reproduced on any testing case in MultiSource.
We may have other cases where we use DW_FORM_ref4 unconditionally.
rdar://problem/13370501
llvm-svn: 176882
Versioned debug info support has been a burden to maintain & also compromised
current debug info verification by causing test cases testing old debug info to
remain rather than being updated to the latest. It also makes it hard to add or
change the metadata schema by requiring various backwards-compatibility in the
DI* hierarchy.
So it's being removed in preparation for new changes to the schema to tidy up
old/unnecessary fields and add new fields needed for new debug info (well, new
to LLVM at least).
The more surprising part of this is the changes to DI*::Verify - this became
necessary due to the changes to AsmWriter. AsmWriter was relying on the version
test to decide which bits of metadata were actually debug info when printing
the comment annotations. Without the version information the tag numbers were
too common & it would print debug info on random metadata that happened to
start with an integer that matched a tag number. Instead this change makes the
Verify functions more precise (just adding "number of operands" checks - not
type checking those operands yet) & relies on that to decide which metadata is
debug info metadata.
llvm-svn: 176838
We now emit a line table for each compile unit. To reduce the prologue size
of each line table, the files and directories used by each compile unit are
stored in std::map<unsigned, std::vector< > > instead of std::vector< >.
The prologue for a lto'ed image can be as big as 93K. Duplicating 93K for each
compile unit causes a huge increase of debug info. With this patch, each
prologue will only emit the files required by the compile unit.
rdar://problem/13342023
llvm-svn: 176605
Failure: undefined symbol 'Lline_table_start0'.
Root-cause: we use a symbol subtraction to calculate at_stmt_list, but
the line table entries are not dumped in the assembly.
Fix: use zero instead of a symbol subtraction for Compile Unit 0.
llvm-svn: 174479
We used to create children DIEs for a scope, then check whether ScopeDIE is
null. If ScopeDIE is null, the children DIEs will be dangling. Other DIEs can
link to those dangling DIEs, which are not emitted at all, causing dwarf error.
The current testing case is 4k lines, from MultiSource/BenchMark/McCat/09-vor.
rdar://problem/13071959
llvm-svn: 174084
using the DW_FORM_GNU_addr_index and a separate .debug_addr section which
stays in the executable and is fully linked.
Sneak in two other small changes:
a) Print out the debug_str_offsets.dwo section.
b) Change form we're expecting the entries in the debug_str_offsets.dwo
section to take from ULEB128 to U32.
Add tests for all of this in the fission-cu.ll test.
llvm-svn: 172578
proposal. This leaves the strings in the skeleton die as strp,
but in all dwo files they're accessed now via DW_FORM_GNU_str_index.
Add support for dumping these sections and modify the fission-cu.ll
testcase to have the correct strings and form. Fix a small bug
in the fixed form sizes routine that involved out of array accesses
for the table and add a FIXME in the extractFast routine to fix
this up.
llvm-svn: 171779
into their new header subdirectory: include/llvm/IR. This matches the
directory structure of lib, and begins to correct a long standing point
of file layout clutter in LLVM.
There are still more header files to move here, but I wanted to handle
them in separate commits to make tracking what files make sense at each
layer easier.
The only really questionable files here are the target intrinsic
tablegen files. But that's a battle I'd rather not fight today.
I've updated both CMake and Makefile build systems (I think, and my
tests think, but I may have missed something).
I've also re-sorted the includes throughout the project. I'll be
committing updates to Clang, DragonEgg, and Polly momentarily.
llvm-svn: 171366
controls each of the abbreviation sets (only a single one at the
moment) and computes offsets separately as well for each set
of DIEs.
No real function change, ordering of abbreviations for the skeleton
CU changed but only because we're computing in a separate order. Fix
the testcase not to care.
llvm-svn: 169793
This reapplies the fix for PR13303 now with more justification. Based on my
execution of the GDB 7.5 test suite this results in:
expected passes: 16101 -> 20890 (+30%)
unexpected failures: 4826 -> 637 (-77%)
There are 23 checks that used to pass and now fail. They are all in
gdb.reverse. Investigating a few looks like they were accidentally passing
due to extra breakpoints being set by this bug. They're generally due to the
difference in end location between gcc and clang, the test suite is trying to
set breakpoints on the closing '}' that clang doesn't associate with any
instructions.
llvm-svn: 169304
Sooooo many of these had incorrect or strange main module includes.
I have manually inspected all of these, and fixed the main module
include to be the nearest plausible thing I could find. If you own or
care about any of these source files, I encourage you to take some time
and check that these edits were sensible. I can't have broken anything
(I strictly added headers, and reordered them, never removed), but they
may not be the headers you'd really like to identify as containing the
API being implemented.
Many forward declarations and missing includes were added to a header
files to allow them to parse cleanly when included first. The main
module rule does in fact have its merits. =]
llvm-svn: 169131
updating an abstract DIE or not. If we are, then we use that. Its children will
be added on later, as well as the object pointer attribute. Otherwise, this
function may be called with a concrete DIE twice and adding the children and
object pointer attribute to it twice.
<rdar://problem/12401423&12600340>
llvm-svn: 167524
r165941: Resubmit the changes to llvm core to update the functions to
support different pointer sizes on a per address space basis.
Despite this commit log, this change primarily changed stuff outside of
VMCore, and those changes do not carry any tests for correctness (or
even plausibility), and we have consistently found questionable or flat
out incorrect cases in these changes. Most of them are probably correct,
but we need to devise a system that makes it more clear when we have
handled the address space concerns correctly, and ideally each pass that
gets updated would receive an accompanying test case that exercises that
pass specificaly w.r.t. alternate address spaces.
However, from this commit, I have retained the new C API entry points.
Those were an orthogonal change that probably should have been split
apart, but they seem entirely good.
In several places the changes were very obvious cleanups with no actual
multiple address space code added; these I have not reverted when
I spotted them.
In a few other places there were merge conflicts due to a cleaner
solution being implemented later, often not using address spaces at all.
In those cases, I've preserved the new code which isn't address space
dependent.
This is part of my ongoing effort to clean out the partial address space
code which carries high risk and low test coverage, and not likely to be
finished before the 3.2 release looms closer. Duncan and I would both
like to see the above issues addressed before we return to these
changes.
llvm-svn: 167222
a) frame setup instructions define the prologue
b) we shouldn't change our location mid-stream
Add a test to make sure that the stack adjustment stays within
the prologue.
llvm-svn: 165250
care about it being an argument variable so that we can decide
that captured block and lambda vars that don't happen to
be arguments could be an argument pointer.
Add the object pointer for one case onto the subprogram die.
rdar://12001329
llvm-svn: 164419
Add some support for dealing with an object pointer on arguments.
Part of rdar://9797999
which now supports adding the object pointer attribute to the
subprogram as it should.
llvm-svn: 163754
DwarfDebug class could generate the same (inlined) DIVariable twice:
1) when trying to find abstract debug variable for a concrete inlined instance.
2) when explicitly collecting info for variables that were optimized out.
This change makes sure that this duplication won't happen and makes
Clang pass "gdb.opt/inline-locals" test from gdb testsuite.
Reviewed by Eric Christopher.
llvm-svn: 159811
include/llvm/Analysis/DebugInfo.h to include/llvm/DebugInfo.h.
The reasoning is because the DebugInfo module is simply an interface to the
debug info MDNodes and has nothing to do with analysis.
llvm-svn: 159312
No functional change intended.
Sorry for the churn. The iterator classes are supposed to help avoid
giant commits like this one in the future. The TableGen-produced
register lists are getting quite large, and it may be necessary to
change the table representation.
This makes it possible to do so without changing all clients (again).
llvm-svn: 157854
brace) so that we get more accurate line number information about the
declaration of a given function and the line where the function
first starts.
Part of rdar://11026482
llvm-svn: 153916
The inline table needs to be constructed ahead of time so that it doesn't try to
create new strings while we're emitting everything.
This reverts commit a8ff9bccb399183cdd5f1c3cec2bda763664b4b0.
llvm-svn: 151864
fixups that are being used to determine section offsets. Reduces
the total number of fixups by 50% for a non-trivial testcase.
Part of rdar://10413936
llvm-svn: 151852
the debug type accelerator tables to contain the tag and a flag
stating whether or not a compound type is a complete type.
rdar://10652330
llvm-svn: 147651
change, now you need a TargetOptions object to create a TargetMachine. Clang
patch to follow.
One small functionality change in PTX. PTX had commented out the machine
verifier parts in their copy of printAndVerify. That now calls the version in
LLVMTargetMachine. Users of PTX who need verification disabled should rely on
not passing the command-line flag to enable it.
llvm-svn: 145714
instance and a concrete inlined instance are the use of DW_TAG_subprogram
instead of DW_TAG_inlined_subroutine and the who owns the tree.
We were also omitting DW_AT_inline from the abstract roots. To fix this,
make sure we mark abstract instance roots with DW_AT_inline even when
we have only out-of-line instances referring to them with DW_AT_abstract_origin.
FileCheck is not a very good tool for tests like this, maybe we should add
a -verify mode to llvm-dwarfdump.
llvm-svn: 144441
.file filenumber "directory" "filename"
This removes one join+split of the directory+filename in MC internals. Because
bitcode files have independent fields for directory and filenames in debug info,
this patch may change the .o files written by existing .bc files.
llvm-svn: 142300
file. Since it should only be used when necessary propagate it through
the backend code generation and tweak testcases accordingly.
This helps with code like in clang's test/CodeGen/debug-info-line.c where
we have multiple #line directives within a single lexical block and want
to generate only a single block that contains each file change.
Part of rdar://10246360
llvm-svn: 141729
Eric Christopher