The indexed dot product instructions only accept the lower 16 D-registers as
the indexed register, but we were e.g. incorrectly accepting:
vudot.u8 d16,d16,d18[0]
Differential Revision: https://reviews.llvm.org/D37968
llvm-svn: 313531
This patch makes the `.eh_frame` extension an alias for `.debug_frame`.
Up till now it was only possible to dump the section using objdump, but
not with dwarfdump. Since the two are essentially interchangeable, we
dump whichever of the two is present.
As a workaround, this patch also adds parsing for 3 currently
unimplemented CFA instructions: `DW_CFA_def_cfa_expression`,
`DW_CFA_expression`, and `DW_CFA_val_expression`. Because I lack the
required knowledge, I just parse the fields without actually creating
the instructions.
Finally, this also fixes the typo in the `.debug_frame` section name
which incorrectly contained a trailing `s`.
Differential revision: https://reviews.llvm.org/D37852
llvm-svn: 313530
This Disassembly support allows for 'round-trip' testing, and rv32i-valid.s
has been updated appropriately.
Differential Revision: https://reviews.llvm.org/D23567
llvm-svn: 313486
This patch supports all RV32I instructions as described in the RISC-V manual.
A future patch will add support for pseudoinstructions and other instruction
expansions (e.g. 0-arg fence -> fence iorw, iorw).
Differential Revision: https://reviews.llvm.org/D23566
llvm-svn: 313485
This reverts commit 6389e7aa724ea7671d096f4770f016c3d86b0d54.
There is a bug in this implementation where the string value of the
checksum is outputted, instead of the actual hex bytes. Therefore the
checksum is incorrect, and this prevent pdbs from being loaded by visual
studio. Revert this until the checksum is emitted correctly.
llvm-svn: 313431
This means that we can honor -fdata-sections rather than
always creating a segment for each symbol.
It also allows for a followup change to add .init_array and friends.
Differential Revision: https://reviews.llvm.org/D37876
llvm-svn: 313395
- Create helper function for resolving weak references.
- Add test that preproduces the crash.
Differential Revision: https://reviews.llvm.org/D37916
llvm-svn: 313381
Summary:
The checksums had already been placed in the IR, this patch allows
MCCodeView to actually write it out to an MCStreamer.
Subscribers: llvm-commits, hiraditya
Differential Revision: https://reviews.llvm.org/D37157
llvm-svn: 313374
This is stepping stone towards honoring -fdata-sections
and letting the assembler decide how many wasm data
segments to create.
Differential Revision: https://reviews.llvm.org/D37834
llvm-svn: 313313
The other members of the dext family of instructions (dextm, dextu) are
traditionally handled by the assembler selecting the right variant of
'dext' depending on the values of the position and size operands.
When these instructions are disassembled, rather than reporting the
actual instruction, an equivalent aliased form of 'dext' is generated
and is reported. This is to mimic the behaviour of binutils.
Reviewers: slthakur, nitesh.jain, atanasyan
Differential Revision: https://reviews.llvm.org/D34887
llvm-svn: 313276
Traditionally GAS has provided automatic selection between dins, dinsm and
dinsu. Binutils also disassembles all instructions in that family as 'dins'
rather than the actual instruction.
Reviewers: slthakur
Differential Revision: https://reviews.llvm.org/D34877
llvm-svn: 313267
Since users typically don't really care about the .dwo / non.dwo
distinction, this patch makes it so dwarfdump --debug-<info,...> dumps
.debug_info and (if available) also .debug_info.dwo. This simplifies
the command line interface (I've removed all dwo-specific dump
options) and makes the tool friendlier to use.
Differential Revision: https://reviews.llvm.org/D37771
llvm-svn: 313207
This patch corrects the definition of the DINSM instruction.
Specification for DINSM instruction for Mips64 says that size operand should
be 2 <= size <= 64, but it is defined as uimm5_inssize_plus1 which gives
range of 1 .. 32.
Patch by Aleksandar Beserminji.
Differential Revision: https://reviews.llvm.org/D37683
llvm-svn: 313149
As discussed on llvm-dev in
http://lists.llvm.org/pipermail/llvm-dev/2017-September/117301.html
this changes the command line interface of llvm-dwarfdump to match the
one used by the dwarfdump utility shipping on macOS. In addition to
being shorter to type this format also has the advantage of allowing
more than one section to be specified at the same time.
In a nutshell, with this change
$ llvm-dwarfdump --debug-dump=info
$ llvm-dwarfdump --debug-dump=apple-objc
becomes
$ dwarfdump --debug-info --apple-objc
Differential Revision: https://reviews.llvm.org/D37714
llvm-svn: 312970
This change only treats imported and exports functions and globals
as symbol table entries the object has a "linking" section (i.e. it is
relocatable object file).
In this case all globals must be of type I32 and initialized with
i32.const. This was previously being assumed but not checked for and
was causing a failure on big endian machines due to using the wrong
value of then union.
See: https://bugs.llvm.org/show_bug.cgi?id=34487
Differential Revision: https://reviews.llvm.org/D37497
llvm-svn: 312674
This adds 2-operand assembly aliases for these instructions:
add r0, r1 => add r0, r0, r1
sub r0, r1 => sub r0, r0, r1
Previously this syntax was only accepted for Thumb2 targets, where the
wide versions of the instructions were used.
This patch allows the 2-operand syntax to be used for Thumb1 targets,
and selects the narrow encoding when it is used for Thumb2 targets.
Differential revision: https://reviews.llvm.org/D37377
llvm-svn: 312321
New instructions are added to AArch32 and AArch64 to aid
floating-point multiplication and addition of complex numbers,
where the complex numbers are packed in a vector register as a
pair of elements. The Imaginary part of the number is placed in the
more significant element, and the Real part of the number is placed
in the less significant element.
Differential Revision: https://reviews.llvm.org/D36792
llvm-svn: 312228
The IDSAR6 system register has been introduced to identify the
v8.3-a Javascript data type conversion and v8.2-a dot product
support.
Differential Revision: https://reviews.llvm.org/D37068
llvm-svn: 312225
These aren't really packed instructions, so the default
op_sel_hi should be 0 since this indicates a conversion.
The operand types are scalar values that behave similar
to an f16 scalar that may be converted to f32.
Doesn't change the default printing for op_sel_hi, just
the parsing.
llvm-svn: 312179
Differential Revision: https://reviews.llvm.org/D36788
M lib/Target/X86/Disassembler/X86DisassemblerDecoder.cpp
M lib/Target/X86/Disassembler/X86DisassemblerDecoder.h
A test/MC/Disassembler/X86/prefixes-i386.s
A test/MC/Disassembler/X86/prefixes-x86_64.s
M test/MC/Disassembler/X86/prefixes.txt
llvm-svn: 311882
This patch is intended to enable the use of basic double letter constraints used in GCC extended inline asm {Yi Y2 Yz Y0 Ym Yt}.
Supersedes D35204
Clang counterpart: D36371
Differential Revision: https://reviews.llvm.org/D36369
llvm-svn: 311644
Some refactoring to X86AsmParser, mostly regarding the way rewrites are conducted.
Mainly, we try to concentrate all the rewrite effort under one hood, so it'll hopefully be less of a mess and easier to maintain and understand.
naturally, some frontend tests were affected: D36794
Differential Revision: https://reviews.llvm.org/D36793
llvm-svn: 311639
Switching to external relocations for ARM-mode branches (to allow Thumb
interworking when the offset is unencodable) causes calls to temporary symbols
to be miscompiled and instead go to the parent externally visible symbol.
Calling a temporary never happens in compiled code, but can occasionally in
hand-written assembly.
llvm-svn: 311611
Armv8.3-A adds instructions that convert a double-precision floating
point number to a signed 32-bit integer with round towards zero,
designed for improving Javascript performance.
Differential Revision: https://reviews.llvm.org/D36785
llvm-svn: 311448
Re-committing after r311325 fixed an unintentional use of '#' comments in
clang.
The '#' token is not a comment for all targets (on ARM and AArch64 it marks an
immediate operand), so we shouldn't treat it as such.
Comments are already converted to AsmToken::EndOfStatement by
AsmLexer::LexLineComment, so this check was unnecessary.
Differential Revision: https://reviews.llvm.org/D36405
llvm-svn: 311326
With the addition of RISCVInstPrinter, it is now possible to test the basic
operation of the RISCV MC layer.
Differential Revision: https://reviews.llvm.org/D23564
llvm-svn: 310917
This adjusts the tests to hopfully pacify the llvm-clang-x86_64-expensive-checks-win
buildbot.
Unlike many other instructions, these instructions have aliases which
take coprocessor registers, gpr register, accumulator (and dsp accumulator)
registers, floating point registers, floating point control registers and
coprocessor 2 data and control operands.
For the moment, these aliases are treated as pseudo instructions which are
expanded into the underlying instruction. As a result, disassembling these
instructions shows the underlying instruction and not the alias.
Reviewers: slthakur, atanasyan
Differential Revision: https://reviews.llvm.org/D35253
llvm-svn: 310834
This allows using semicolons for bundling up more than one
statement per line. This is used within the mingw-w64 project in some
assembly files that contain code for multiple architectures.
Differential Revision: https://reviews.llvm.org/D36366
llvm-svn: 310797
K0 isn't expected as a write-mask, so provide a detailed error here, instead of the more generic one (invalid op for insn)
Conforms with gas
Differential Revision: https://reviews.llvm.org/D36570
llvm-svn: 310789
Add assembler and disassembler support for the ARMv8.3-A pointer
authentication instructions.
Differential Revision: https://reviews.llvm.org/D36517
llvm-svn: 310709
Added assembler and disassembler support for the new Release
Consistent processor consistent instructions, introduced with ARM
v8.3-A for AArch64.
Differential Revision: https://reviews.llvm.org/D36522
llvm-svn: 310575
Currently, far jmp/call which utilizes a 48bit memory operand would have been invoked via the 'lcall/ljmp' mnemonic (intel style).
This patch align those variants to formal intel spec
Differential Revision: https://reviews.llvm.org/D35846
llvm-svn: 310485
Adopt a more strict approach regarding what marks should/can appear after a destination register, when operating upon an AVX512 platform.
Differential Revision: https://reviews.llvm.org/D35785
llvm-svn: 310467
The '#' token is not a comment for all targets (on ARM and AArch64 it marks an
immediate operand), so we shouldn't treat it as such.
Comments are already converted to AsmToken::EndOfStatement by
AsmLexer::LexLineComment, so this check was unnecessary.
Differential Revision: https://reviews.llvm.org/D36405
llvm-svn: 310457
This reverts r310243. Only MVFR2 is actually restricted to v8 and it'll be a
little while before we can get a proper fix together. Better that we allow
incorrect code than reject correct in the meantime.
llvm-svn: 310384
This patch addresses two issues with assembly and disassembly for VMRS/VMSR:
1.currently VMRS/VMSR instructions accessing fpsid, mvfr{0-2} and fpexc, are
accepted for non ARMv8-A targets.
2. all VMRS/VMSR instructions accept writing/reading to PC and SP, when only
ARMv7-A and ARMv8-A should be allowed to write/read to SP and none to PC.
This patch addresses those issues and adds tests for these cases.
Differential Revision: https://reviews.llvm.org/D36306
llvm-svn: 310243
I was surprised to see the code model being passed to MC. After all,
it assembles code, it doesn't create it.
The one place it is used is in the expansion of .cfi directives to
handle .eh_frame being more that 2gb away from the code.
As far as I can tell, gnu assembler doesn't even have an option to
enable this. Compiling a c file with gcc -mcmodel=large produces a
regular looking .eh_frame. This is probably because in practice linker
parse and recreate .eh_frames.
In llvm this is used because the JIT can place the code and .eh_frame
very far apart. Ideally we would fix the jit and delete this
option. This is hard.
Apart from confusion another problem with the current interface is
that most callers pass CodeModel::Default, which is bad since MC has
no way to map it to the target default if it actually needed to.
This patch then replaces the argument with a boolean with a default
value. The vast majority of users don't ever need to look at it. In
fact, only CodeGen and llvm-mc use it and llvm-mc just to enable more
testing.
llvm-svn: 309884
GAS ignores the aforementioned issue
this patch aligns LLVM + throws in an appropriate warning
Differential Revision: https://reviews.llvm.org/D36060
llvm-svn: 309841
Summary:
Most CPUs implementing AES fusion require instruction pairs of the form
AESE Vn, _
AESMC Vn, Vn
and
AESD Vn, _
AESIMC Vn, Vn
The constraint is added to AES(I)MC instructions which use the result of
an AES(E|D) instruction by using AES(I)MCTrr pseudo instructions, which
constraint source and destination registers to be the same.
A nice side effect of this change is that now all possible pairs are
scheduled back-to-back on the exynos-m1 for the misched-fusion-aes.ll
test case.
I had to update aes_load_store. The version I added initially was very
reduced and with the new constraint, AESE/AESMC could not be scheduled
back-to-back. I updated the test to be more realistic and still expose
the same scheduling problem as the initial test case.
Reviewers: t.p.northover, rengolin, evandro, kristof.beyls, silviu.baranga
Reviewed By: t.p.northover, evandro
Subscribers: aemerson, javed.absar, llvm-commits
Differential Revision: https://reviews.llvm.org/D35299
llvm-svn: 309495
In COFF, a symbol offset can't be stored in the relocation (as is
done in ELF or MachO), but is stored as the immediate in the
instruction itself. The immediate in the ADRP thus is the symbol
offset in bytes, not in pages. For the PAGEOFFSET_12A/L relocations,
ignore any offset outside of the lowest 12 bits; they won't have any
effect on the ADD/LDR/STR instruction itself but only on the associated
ADRP.
This is similar to how the same issue is handled for MOVW/MOVT
instructions in ELF (see e.g. SVN r307713, and r307728 in lld).
This fixes "fixup out of range" errors while building larger object
files, where temporary symbols end up as a plain section symbol and
an offset, and fixes any cases where the symbol offset mean that
the actual target ended up on a different page than the symbol
itself.
Differential Revision: https://reviews.llvm.org/D35791
llvm-svn: 309105
Summary:
Some SPARC TLS relocations were applying nontrivial adjustments
to zero value, leading to unexpected non-zero values in ELF and then
Solaris linker failures.
Getting rid of these adjustments.
Fixes PR33825.
Reviewers: rafael, asb, jyknight
Subscribers: joerg, jyknight, llvm-commits
Differential Revision: https://reviews.llvm.org/D35567
llvm-svn: 308978
The soffset field needs to be be set to 0x7f to disable it,
not 0. 0 is interpreted as an SGPR offset.
This should be enough to get basic usage of the global instructions
working. Technically it is possible to use an SGPR_32 offset,
but I'm not sure if it's correct with 64-bit pointers, but
that is not handled now. This should also be cleaned up
to be more similar to how different MUBUF modes are handled,
and to have InstrMappings between the different types.
llvm-svn: 308583
This generalizes an existing fix from ELF to MachO and COFF.
Test that an ADRP to a local symbol whose offset is known at assembly
time still produces relocations, both for MachO and COFF. Test that
an ADRP without a @page modifier on MachO fails (previously it
didn't).
Differential Revision: https://reviews.llvm.org/D35544
llvm-svn: 308518
This patch cleans up and fixes issues in the M-Class system register handling:
1. It defines the system registers and the encoding (SYSm values) in one place:
a new ARMSystemRegister.td using SearchableTable, thereby removing the
hand-coded values which existed in multiple places.
2. Some system registers e.g. BASEPRI_MAX_NS which do not exist were being allowed!
Ref: ARMv6/7/8M architecture reference manual.
Reviewed by: @t.p.northover, @olist01, @john.brawn
Differential Revision: https://reviews.llvm.org/D35209
llvm-svn: 308456
This adds support for the new 128-bit vector float instructions of z14.
Note that these instructions actually only operate on the f128 type,
since only each 128-bit vector register can hold only one 128-bit
float value. However, this is still preferable to the legacy 128-bit
float instructions, since those operate on pairs of floating-point
registers (so we can hold at most 8 values in registers), while the
new instructions use single vector registers (so we hold up to 32
value in registers).
Adding support includes:
- Enabling the instructions for the assembler/disassembler.
- CodeGen for the instructions. This includes allocating the f128
type now to the VR128BitRegClass instead of FP128BitRegClass.
- Scheduler description support for the instructions.
Note that for a small number of operations, we have no new vector
instructions (like integer <-> 128-bit float conversions), and so
we use the legacy instruction and then reformat the operand
(i.e. copy between a pair of floating-point registers and a
vector register).
llvm-svn: 308196
This adds support for the new 32-bit vector float instructions of z14.
This includes:
- Enabling the instructions for the assembler/disassembler.
- CodeGen for the instructions, including new LLVM intrinsics.
- Scheduler description support for the instructions.
- Update to the vector cost function calculations.
In general, CodeGen support for the new v4f32 instructions closely
matches support for the existing v2f64 instructions.
llvm-svn: 308195
This patch series adds support for the IBM z14 processor. This part includes:
- Basic support for the new processor and its features.
- Support for new instructions (except vector 32-bit float and 128-bit float).
- CodeGen for new instructions, including new LLVM intrinsics.
- Scheduler description for the new processor.
- Detection of z14 as host processor.
Support for the new 32-bit vector float and 128-bit vector float
instructions is provided by separate patches.
llvm-svn: 308194
Summary:
Previously, CodeGen checked first src operand type to determine if omod is supported by instruction. This isn't correct for some instructions: e.g. V_CMP_EQ_F32 has floating-point src operands but desn't support omod.
Changed .td files to check if dst operand instead of src operand.
Reviewers: arsenm, vpykhtin
Subscribers: kzhuravl, wdng, nhaehnle, yaxunl, dstuttard, tpr, t-tye
Differential Revision: https://reviews.llvm.org/D35350
llvm-svn: 308179
Unlike many other instructions, these instructions have aliases which
take coprocessor registers, gpr register, accumulator (and dsp accumulator)
registers, floating point registers, floating point control registers and
coprocessor 2 data and control operands.
For the moment, these aliases are treated as pseudo instructions which are
expanded into the underlying instruction. As a result, disassembling these
instructions shows the underlying instruction and not the alias.
Reviewers: slthakur, atanasyan
Differential Revision: https://reviews.llvm.org/D35253
The last version of this patch broke one of the expensive checks buildbots,
this version changes the failing test/MC/Mips/mt/invalid.s and other invalid
tests to write the errors to a file and run FileCheck on that, rather than
relying on the 'not llvm-mc ... <%s 2>&1 | Filecheck %s' idiom.
Hopefully this will sarisfy the buildbot.
llvm-svn: 308023
The AsmParser mnemonic spell checker was introduced in r307148 and enabled only
for ARM. This patch enables it for AArch64.
Differential Revision: https://reviews.llvm.org/D35357
llvm-svn: 307918
Unlike many other instructions, these instructions have aliases which
take coprocessor registers, gpr register, accumulator (and dsp accumulator)
registers, floating point registers, floating point control registers and
coprocessor 2 data and control operands.
For the moment, these aliases are treated as pseudo instructions which are
expanded into the underlying instruction. As a result, disassembling these
instructions shows the underlying instruction and not the alias.
Reviewers: slthakur, atanasyan
Differential Revision: https://reviews.llvm.org/D35253
llvm-svn: 307836
Summary:
This allows tools like lld that process relocations
to apply data relocation correctly. This information
is required because relocation are stored as section
offset.
Subscribers: jfb, dschuff, jgravelle-google, aheejin
Differential Revision: https://reviews.llvm.org/D35234
llvm-svn: 307741
Avoid duplicating DictScope with hand-written names everywhere. Print
the S_-prefixed symbol kind for every record. This should make it easier
to search for certain kinds of records when debugging PDB linking.
llvm-svn: 307732
The issue is not if the value is pcrel. It is whether we have a
relocation or not.
If we have a relocation, the static linker will select the upper
bits. If we don't have a relocation, we have to do it.
llvm-svn: 307730
This patch implements the .module and .set directives for the MT ASE,
notably that .module sets the relevant flags in .MIPS.abiflags and .set
doesn't.
Reviewers: slthakur, atanasyan
Differential Revision: https://reviews.llvm.org/D35249
llvm-svn: 307716
For ELF, a movw+movt pair is handled as two separate relocations.
If an offset should be applied to the symbol address, this offset is
stored as an immediate in the instruction (as opposed to stored as an
offset in the relocation itself).
Even though the actual value stored in the movt immediate after linking
is the top half of the value, we need to store the unshifted offset
prior to linking. When the relocation is made during linking, the offset
gets added to the target symbol value, and the upper half of the value
is stored in the instruction.
This makes sure that movw+movt with offset symbols get properly
handled, in case the offset addition in the lower half should be
carried over to the upper half.
This makes the output from the additions to the test case match
the output from GNU binutils.
For COFF and MachO, the movw/movt relocations are handled as a pair,
and the overflow from the lower half gets carried over to the movt,
so they should keep the shifted offset just as before.
Differential Revision: https://reviews.llvm.org/D35242
llvm-svn: 307713
Preparatory work for adding the MIPS MT (multi-threading) ASE instructions.
Reviewers: slthakur, atanasyan
Differential Revision: https://reviews.llvm.org/D35247
llvm-svn: 307679
This change allows the pc to be used as a destination register for the
pseudo instruction LDR pc,=expression . The pseudo instruction must not be
transformed into a MOV, but it can use the Thumb2 LDR (literal) instruction
to a constant pool entry. See (A7.7.43 from ARMv7M ARM ARM).
Differential Revision: https://reviews.llvm.org/D34751
llvm-svn: 307640
Summary: When implementing MCFillFragment, use the size of the fragment,
rather than the size of the section.
Patch by Dan Gohman
Differential Revision: https://reviews.llvm.org/D35090
llvm-svn: 307565
Model weakly defined symbols as symbols that are both
exports and imported and marked as weak. Local references
to the symbols refer to the import but the linker can
resolve this to the weak export if not strong symbol
is found at link time.
Differential Revision: https://reviews.llvm.org/D35029
llvm-svn: 307348
Previously we were generating a void(void) function type
for a weak alias. Update the weak-alias test case to
catch this.
Differential Revision: https://reviews.llvm.org/D34734
llvm-svn: 307194
This implements suggesting other mnemonics when an invalid one is specified,
for example:
$ echo "adXd r1,r2,#3" | llvm-mc -triple arm
<stdin>:1:1: error: invalid instruction, did you mean: add, qadd?
adXd r1,r2,#3
^
The implementation is target agnostic, but as a first step I have added it only
to the ARM backend; so the ARM backend is a good example if someone wants to
enable this too for another target.
Differential Revision: https://reviews.llvm.org/D33128
llvm-svn: 307148
This is a short-term fix for PR33650 aimed to get the modules build bots green again.
Remove all the places where we use the LLVM_YAML_IS_(FLOW_)?SEQUENCE_VECTOR
macros to try to locally specialize a global template for a global type. That's
not how C++ works.
Instead, we now centrally define how to format vectors of fundamental types and
of string (std::string and StringRef). We use flow formatting for the former
cases, since that's the obvious right thing to do; in the latter case, it's
less clear what the right choice is, but flow formatting is really bad for some
cases (due to very long strings), so we pick block formatting. (Many of the
cases that were using flow formatting for strings are improved by this change.)
Other than the flow -> block formatting change for some vectors of strings,
this should result in no functionality change.
Differential Revision: https://reviews.llvm.org/D34907
Corresponding updates to clang, clang-tools-extra, and lld to follow.
llvm-svn: 306878
This adds all remaining instructions that were still missing, mostly
privileged and semi-privileged system-level instructions. These are
provided for use with the assembler and disassembler only.
This brings the LLVM assembler / disassembler to parity with the
GNU binutils tools.
llvm-svn: 306876
In particular, use CALL16 (similar to O32) for address loads into T9 for certain
cases. Otherwise use a %got_disp relocation to load the address of a symbol.
Small offsets (small enough to fit in a 16-bit signed immediate) can be used and
are added to the symbol address after it is loaded from the GOT. Larger offsets
are currently unsupported and result in an error from the assembler.
Reviewers: sdardis
Reviewed By: sdardis
Patch by: John Baldwin
Subscribers: llvm-commits, seanbruno, arichardson, emaste, dim
Differential Revision: https://reviews.llvm.org/D33948
llvm-svn: 306831
There are a few instructions provided by the high-word facility (z196)
that we cannot easily exploit for code generation. This patch at least
adds those missing instructions for the assembler and disassembler.
This means that now all nonprivileged instructions up to z13 are
supported by the LLVM assembler / disassembler.
llvm-svn: 306821
Summary:
This is the llvm part of the initial implementation to support Windows ARM64 COFF format.
I will gradually add more functionality in subsequent patches.
Reviewers: ruiu, rnk, t.p.northover, compnerd
Reviewed By: ruiu, compnerd
Subscribers: aemerson, mgorny, javed.absar, llvm-commits, kristof.beyls
Differential Revision: https://reviews.llvm.org/D34705
llvm-svn: 306490
The overal size of the data section (including BSS)
is otherwise not included in the wasm binary.
Differential Revision: https://reviews.llvm.org/D34657
llvm-svn: 306459
Add the instruction aliases for ds(r|l)l for the two operand alias
of ds(r|l)lv and the aliases ds(r|l)l with the three register operands.
llvm-svn: 306405
processFixupValue is called on every relaxation iteration. applyFixup
is only called once at the very end. applyFixup is then the correct
place to do last minute changes and value checks.
While here, do proper range checks again for fixup_arm_thumb_bl. We
used to do it, but dropped because of thumb2. We now do it again, but
use the thumb2 range.
llvm-svn: 306177
After fixing (r306173) a failing test in the lld test suite (r306173),
reland r306095.
Original commit message:
[mips] Fix register positions in the aui/daui instructions
Swapped the position of the rt and rs register in the aui/daui
instructions for mips32r6 and mips64r6. With this change, the format of
the generated instructions complies with specifications and GCC.
Patch by Milos Stojanovic.
llvm-svn: 306174
ELF/mips-plt-r6.s in lld-test is failing. Reverting the change.
Original commit message:
[mips] Fix register positions in the aui/daui instructions
Swapped the position of the rt and rs register in the aut/daui
instructions for mips32r6 and mips64r6. With this change, the format of
the generated instructions complies with specifications and GCC.
Patch by Milos Stojanovic.
llvm-svn: 306099
Swapped the position of the rt and rs register in the aut/daui instructions
for mips32r6 and mips64r6. With this change, the format of the generated
instructions complies with specifications and GCC.
Patch by Milos Stojanovic.
Differential Revision: https://reviews.llvm.org/D33988
llvm-svn: 306095
X86_64 COFF only has support for 32 bit pcrel relocations. Produce an
error on all others.
Note that gnu as has extended the relocation values to support
this. It is not clear if we should support the gnu extension.
llvm-svn: 306082
For whatever reason, when processing
.globl foo
foo:
.data
bar:
.long foo-bar
llvm-mc creates a relocation with the section:
0x0 IMAGE_REL_I386_REL32 .text
This is different than when the relocation is relative from the
beginning. For example, a file with
call foo
produces
0x0 IMAGE_REL_I386_REL32 foo
I would like to refactor the logic for converting "foo - ." into a
relative relocation so that it is shared with ELF. This is the first
step and just changes the coff implementation to match what ELF (and
COFF in the case of calls) does.
llvm-svn: 306063
There's nothing incorrect about emitting such relocations against
symbols defined in other objects. The code in EmitCOFFSec* was missing
the visitUsedExpr part of MCStreamer::EmitValueImpl, so these symbols
were not being registered with the object file assembler.
This will be used to make reduced test cases for LLD.
llvm-svn: 306057
Intrinsic already existed for llvm.SI.tbuffer.store
Needed tbuffer.load and also re-implementing the intrinsic as llvm.amdgcn.tbuffer.*
Added CodeGen tests for the 2 new variants added.
Left the original llvm.SI.tbuffer.store implementation to avoid issues with existing code
Subscribers: arsenm, kzhuravl, wdng, nhaehnle, yaxunl, tony-tye, tpr
Differential Revision: https://reviews.llvm.org/D30687
llvm-svn: 306031
Summary:
The ARM ELF ABI requires the linker to do interworking for wide
conditional branches from Thumb code to ARM code.
That was pointed out by @peter.smith in the comments for D33436.
Reviewers: rafael, peter.smith, echristo
Reviewed By: peter.smith
Subscribers: aemerson, javed.absar, kristof.beyls, llvm-commits, peter.smith
Differential Revision: https://reviews.llvm.org/D34447
llvm-svn: 306009
This patch allows $AT to be used as a register name in assembly files.
Currently only $at is recognized as a valid register name.
Patch by Stanislav Ocovaj.
Differential Revision: https://reviews.llvm.org/D34348
llvm-svn: 306007
Rather than creating a separate ".rdata" section distinct from the
customary ".rodata" in ELF, ".rdata" switches to the ".rodata" section.
This patch relands r305949 and r305950 with the correct commit message
and addresses nit raised during review.
Patch By: John Baldwin!
Differential Revision: https://reviews.llvm.org/D34452
llvm-svn: 305995
Sjoerd Meijer