This patch defines the i1 type as illegal in the X86 backend for AVX512.
For DAG operations on <N x i1> types (build vector, extract vector element, ...) i8 is used, and should be truncated/extended.
This should produce better scalar code for i1 types since GPRs will be used instead of mask registers.
Differential Revision: https://reviews.llvm.org/D32273
llvm-svn: 303421
Summary:
This causes them to be re-computed more often than necessary but resolves
objections that were raised post-commit on r301750.
Reviewers: qcolombet, ab, t.p.northover, rovka, kristof.beyls
Reviewed By: qcolombet
Subscribers: igorb, llvm-commits
Differential Revision: https://reviews.llvm.org/D32861
llvm-svn: 303418
This also reverts follow-ups r303292 and r303298.
It broke some Chromium tests under MSan, and apparently also internal
tests at Google.
llvm-svn: 303369
This provides a new way to access the TargetMachine through
TargetPassConfig, as a dependency.
The patterns replaced here are:
* Passes handling a null TargetMachine call
`getAnalysisIfAvailable<TargetPassConfig>`.
* Passes not handling a null TargetMachine
`addRequired<TargetPassConfig>` and call
`getAnalysis<TargetPassConfig>`.
* MachineFunctionPasses now use MF.getTarget().
* Remove all the TargetMachine constructors.
* Remove INITIALIZE_TM_PASS.
This fixes a crash when running `llc -start-before prologepilog`.
PEI needs StackProtector, which gets constructed without a TargetMachine
by the pass manager. The StackProtector pass doesn't handle the case
where there is no TargetMachine, so it segfaults.
Related to PR30324.
Differential Revision: https://reviews.llvm.org/D33222
llvm-svn: 303360
According to Intel's Optimization Reference Manual for SNB+:
" For LEA instructions with three source operands and some specific situations, instruction latency has increased to 3 cycles, and must
dispatch via port 1:
- LEA that has all three source operands: base, index, and offset
- LEA that uses base and index registers where the base is EBP, RBP,or R13
- LEA that uses RIP relative addressing mode
- LEA that uses 16-bit addressing mode "
This patch currently handles the first 2 cases only.
Differential Revision: https://reviews.llvm.org/D32277
llvm-svn: 303333
- '-verify-mahcineinstrs' starts to complain allocatable live-in physical
registers on non-entry or non-landing-pad basic blocks.
- Refactor the XBEGIN translation to define EAX on a dedicated fallback code
path due to XABORT. Add a pseudo instruction to define EAX explicitly to
avoid add physical register live-in.
Differential Revision: https://reviews.llvm.org/D33168
llvm-svn: 303306
Summary: Moving LiveRangeShrink to x86 as this pass is mostly useful for archtectures with great register pressure.
Reviewers: MatzeB, qcolombet
Reviewed By: qcolombet
Subscribers: jholewinski, jyknight, javed.absar, llvm-commits
Differential Revision: https://reviews.llvm.org/D33294
llvm-svn: 303292
According to Intel's Optimization Reference Manual for SNB+:
" For LEA instructions with three source operands and some specific situations, instruction latency has increased to 3 cycles, and must
dispatch via port 1:
- LEA that has all three source operands: base, index, and offset
- LEA that uses base and index registers where the base is EBP, RBP,or R13
- LEA that uses RIP relative addressing mode
- LEA that uses 16-bit addressing mode "
This patch currently handles the first 2 cases only.
Differential Revision: https://reviews.llvm.org/D32277
llvm-svn: 303183
This function gives the wrong answer on some non-ELF platforms in some
cases. The function that does the right thing lives in Mangler.h. To try to
discourage people from using this function, give it a different name.
Differential Revision: https://reviews.llvm.org/D33162
llvm-svn: 303134
Replace SelectionDAG::getNode(ISD::SELECT, ...)
and SelectionDAG::getNode(ISD::VSELECT, ...)
with SelectionDAG::getSelect(...)
Saves a few lines of code and in some cases saves the need to explicitly
check the type of the desired node.
llvm-svn: 303024
This patch adds min/max population count, leading/trailing zero/one bit counting methods.
The min methods return answers based on bits that are known without considering unknown bits. The max methods give answers taking into account the largest count that unknown bits could give.
Differential Revision: https://reviews.llvm.org/D32931
llvm-svn: 302925
Avoid using report_fatal_error, because it will ask the user to file a
bug. If the user attempts to disable SSE on x86_64 and them use floating
point, that's a bug in their code, not a bug in the compiler.
This is just a start. There are other ways to crash the backend in this
configuration, but they should be updated to follow this pattern.
Differential Revision: https://reviews.llvm.org/D27522
llvm-svn: 302835
manages to form a VSELECT with a non-i1 element type condition. Those
are technically allowed in SDAG (at least, the generic type legalization
logic will form them and I wouldn't want to try to audit everything te
preclude forming them) so we need to be able to lower them.
This isn't too hard to implement. We mark VSELECT as custom so we get
a chance in C++, add a fast path for i1 conditions to get directly
handled by the patterns, and a fallback when we need to manually force
the condition to be an i1 that uses the vptestm instruction to turn
a non-mask into a mask.
This, unsurprisingly, generates awful code. But it at least doesn't
crash. This was actually impacting open source packages built with LLVM
for AVX-512 in the wild, so quickly landing a patch that at least stops
the immediate bleeding.
I think I've found where to fix the codegen quality issue, but less
confident of that change so separating it out from the thing that
doesn't change the result of any existing test case but causes mine to
not crash.
llvm-svn: 302785
Summary:
Move getX86ConditionCode() from X86FastISel.cpp to X86InstrInfo.cpp so it can be used by GloabalIsel instruction selector.
This is a pre-commit for a patch I'm working on to support G_ICMP. NFC.
Reviewers: zvi, guyblank, delena
Reviewed By: guyblank, delena
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D33038
llvm-svn: 302767
Use variadic templates instead of relying on <cstdarg> + sentinel.
This enforces better type checking and makes code more readable.
Differential Revision: https://reviews.llvm.org/D32541
llvm-svn: 302571
This patch adds more patterns that a reasonable person might write that can be compiled to BZHI.
This adds support for
(~0U >> (32 - b)) & a;
and
a << (32 - b) >> (32 - b);
This was inspired by the code in APInt::clearUnusedBits.
This can pass an index of 32 to the bzhi instruction which a quick test of Haswell hardware shows will not mask any bits. Though the description text in the Intel manual says the "index is saturated to OperandSize-1". The pseudocode in the same manual indicates no bits will be zeroed for this case.
I think this is still missing cases where the subtract portion is an 8-bit operation.
Differential Revision: https://reviews.llvm.org/D32616
llvm-svn: 302549
for scalar masked instructions only the lower bit of the mask is relevant. so for constant masks we should either do an unmasked operation or no operation, depending on the value of the lower bit.
This patch handles cases where the lower bit is '1'.
Differential Revision: https://reviews.llvm.org/D32805
llvm-svn: 302546
Using arguments with attribute inalloca creates problems for verification
of machine representation. This attribute instructs the backend that the
argument is prepared in stack prior to CALLSEQ_START..CALLSEQ_END
sequence (see http://llvm.org/docs/InAlloca.htm for details). Frame size
stored in CALLSEQ_START in this case does not count the size of this
argument. However CALLSEQ_END still keeps total frame size, as caller can
be responsible for cleanup of entire frame. So CALLSEQ_START and
CALLSEQ_END keep different frame size and the difference is treated by
MachineVerifier as stack error. Currently there is no way to distinguish
this case from actual errors.
This patch adds additional argument to CALLSEQ_START and its
target-specific counterparts to keep size of stack that is set up prior to
the call frame sequence. This argument allows MachineVerifier to calculate
actual frame size associated with frame setup instruction and correctly
process the case of inalloca arguments.
The changes made by the patch are:
- Frame setup instructions get the second mandatory argument. It
affects all targets that use frame pseudo instructions and touched many
files although the changes are uniform.
- Access to frame properties are implemented using special instructions
rather than calls getOperand(N).getImm(). For X86 and ARM such
replacement was made previously.
- Changes that reflect appearance of additional argument of frame setup
instruction. These involve proper instruction initialization and
methods that access instruction arguments.
- MachineVerifier retrieves frame size using method, which reports sum of
frame parts initialized inside frame instruction pair and outside it.
The patch implements approach proposed by Quentin Colombet in
https://bugs.llvm.org/show_bug.cgi?id=27481#c1.
It fixes 9 tests failed with machine verifier enabled and listed
in PR27481.
Differential Revision: https://reviews.llvm.org/D32394
llvm-svn: 302527
Similar to what we do for vXi8 ASHR(X, 7), use SSE42's PCMPGTQ to splat the sign instead of using the PSRAD+PSHUFD.
Avoiding bitcasts this improves combines that utilize computeNumSignBits, permits memory folding and reduces pipe pressure. Although it does require a second register, given that this is a (cheap) zero register the impact is minimal.
Differential Revision: https://reviews.llvm.org/D32973
llvm-svn: 302525
Currently combineLogicBlendIntoPBLENDV can only match ASHR to detect sign splatting of a bit mask, this patch generalises this to use computeNumSignBits instead.
This is a first step in several things we can do to improve PBLENDV support:
* Better matching of X86ISD::ANDNP patterns.
* Handle floating point cases.
* Better vector and bitcast support in computeNumSignBits.
* Recognise that PBLENDV only uses the sign bit of the mask, we should be able strip away sign splats (ASHR, PCMPGT isNeg tests etc.).
Differential Revision: https://reviews.llvm.org/D32953
llvm-svn: 302424
This patch introduces an LLVM intrinsic and a target opcode for custom event
logging in XRay. Initially, its use case will be to allow users of XRay to log
some type of string ("poor man's printf"). The target opcode compiles to a noop
sled large enough to enable calling through to a runtime-determined relative
function call. At runtime, when X-Ray is enabled, the sled is replaced by
compiler-rt with a trampoline to the logic for creating the custom log entries.
Future patches will implement the compiler-rt parts and clang-side support for
emitting the IR corresponding to this intrinsic.
Reviewers: timshen, dberris
Subscribers: igorb, pelikan, rSerge, timshen, echristo, dberris, llvm-commits
Differential Revision: https://reviews.llvm.org/D27503
llvm-svn: 302405
Igor Breger