The function used to finish off PHIs by adding the relevant basic blocks can
fail if we're aborting and still don't actually have the needed
MachineBasicBlocks. So avoid trying in that case.
llvm-svn: 288727
When the entry block was empty after arg lowering, we were always placing
constants at the end. This is probably hamrless while translating the same
block, but horribly wrong once its terminator has been translated. So switch to
inserting at the beginning.
llvm-svn: 288720
This makes it more similar to the floating-point constant, and also allows for
larger constants to be translated later. There's no real functional change in
this patch though, just syntax updates.
llvm-svn: 288712
Returning 0 (NoReg) from getOrCreateVReg leads to unexpected situations later
in the translation. It's better to return a valid (if undefined) register and
let the rest of the instruction carry on as planned.
llvm-svn: 288709
so we can stop using DW_OP_bit_piece with the wrong semantics.
The entire back story can be found here:
http://lists.llvm.org/pipermail/llvm-commits/Week-of-Mon-20161114/405934.html
The gist is that in LLVM we've been misinterpreting DW_OP_bit_piece's
offset field to mean the offset into the source variable rather than
the offset into the location at the top the DWARF expression stack. In
order to be able to fix this in a subsequent patch, this patch
introduces a dedicated DW_OP_LLVM_fragment operation with the
semantics that we used to apply to DW_OP_bit_piece, which is what we
actually need while inside of LLVM. This patch is complete with a
bitcode upgrade for expressions using the old format. It does not yet
fix the DWARF backend to use DW_OP_bit_piece correctly.
Implementation note: We discussed several options for implementing
this, including reserving a dedicated field in DIExpression for the
fragment size and offset, but using an custom operator at the end of
the expression works just fine and is more efficient because we then
only pay for it when we need it.
Differential Revision: https://reviews.llvm.org/D27361
rdar://problem/29335809
llvm-svn: 288683
We treat bitwise 'not' as a special operation and try not to reduce its all-ones mask.
Presumably, this is because a 'not' may be cheaper than a generic 'xor' or it may get
folded into another logic op if the target has those. However, if we can remove a logic
instruction by changing the xor's constant mask value, that should always be a win.
Note that the IR version of SimplifyDemandedBits() does not treat 'not' as a special-case
currently (although that's marked with a FIXME). So if you run this IR through -instcombine,
you should get the same end result. I'm hoping to add a different backend transform that
will expose this problem though, so I need to solve this first.
Differential Revision: https://reviews.llvm.org/D27356
llvm-svn: 288676
This function seems target-independent so far: all the target-specific behaviour
is isolated in the CCAssignFn and the ValueHandler (which we're also extracting
into the generic CallLowering).
The intention is to use this in the ARM backend.
Differential Revision: https://reviews.llvm.org/D27045
llvm-svn: 288658
Summary:
When X = 0 and Y = inf, the original code produces inf, but the transformed
code produces nan. So this transform (and its relatives) should only be
used when the no-infs-fp-math flag is explicitly enabled.
Also disable the transform using fmad (intermediate rounding) when unsafe-math
is not enabled, since it can reduce the precision of the result; consider this
example with binary floating point numbers with two bits of mantissa:
x = 1.01
y = 111
x * (y + 1) = 1.01 * 1000 = 1010 (this is the exact result; no rounding occurs at any step)
x * y + x = 1000.11 + 1.01 =r 1000 + 1.01 = 1001.01 =r 1000 (with rounding towards zero)
The example relies on rounding towards zero at least in the second step.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98578
Reviewers: RKSimon, tstellarAMD, spatel, arsenm
Subscribers: wdng, llvm-commits
Differential Revision: https://reviews.llvm.org/D26602
llvm-svn: 288506
Instead, expose whether the current type is an array or a struct, if an array
what the upper bound is, and if a struct the struct type itself. This is
in preparation for a later change which will make PointerType derive from
Type rather than SequentialType.
Differential Revision: https://reviews.llvm.org/D26594
llvm-svn: 288458
In r266692, we made it possible to emit linkage names for just inlined
functions, putting the attribute on the abstract origin. Make sure we
don't think the linkage-name was already emitted on a declaration.
Differential Revision: http://reviews.llvm.org/D27320
llvm-svn: 288450
This prevents erratic stepping behavior as well as incorrect source attribution
for sample profiling.
Reviewers: dblakie
Subscribers: llvm-commit
Differential Revision: https://reviews.llvm.org/D27290
llvm-svn: 288442
This SmallVector is using up 128 bytes on the stack every time despite
almost always being empty[1], and since this function can recurse quite
deeply that adds up to a lot of overhead. We've seen this run afoul of
ulimits in some cases with ASAN on.
Replacing the SmallVector with a std::vector trades an occasional heap
allocation for vastly less stack usage.
[1]: I gathered some stats on an internal test suite and the vector
was non-empty in only 45,000 of 10,000,000 calls to this function.
llvm-svn: 288441
Move the cast<MCSymbolELF> inside emitELFSize, so that:
- it's done in one place instead of at each call
- it's more consistent with similar functions like EmitCOFFSafeSEH
- ambiguity between cast<> and dyn_cast<> is avoided (which also
eliminates an unnecessary dyn_cast call)
This also makes it easier to experiment with using ".size" directives on
non-ELF targets.
llvm-svn: 288437
The coalescer eliminates copies from reserved registers of the form:
%vregX = COPY %rY
in the case where %rY is a reserved register. However this turns out to
be invalid if only some of the subregisters are reserved (see also
https://reviews.llvm.org/D26648).
Differential Revision: https://reviews.llvm.org/D26687
llvm-svn: 288428
Recommitting r288293 with some extra fixes for GlobalISel code.
Most of the exception handling members in MachineModuleInfo is actually
per function data (talks about the "current function") so it is better
to keep it at the function instead of the module.
This is a necessary step to have machine module passes work properly.
Also:
- Rename TidyLandingPads() to tidyLandingPads()
- Use doxygen member groups instead of "//===- EH ---"... so it is clear
where a group ends.
- I had to add an ugly const_cast at two places in the AsmPrinter
because the available MachineFunction pointers are const, but the code
wants to call tidyLandingPads() in between
(markFunctionEnd()/endFunction()).
Differential Revision: https://reviews.llvm.org/D27227
llvm-svn: 288405
The DIEUnit class represents a compile or type unit and it owns the unit DIE as an instance variable. This allows anyone with a DIE, to get the unit DIE, and then get back to its DIEUnit without adding any new ivars to the DIE class. Why was this needed? The DIE class has an Offset that is always the CU relative DIE offset, not the "offset in debug info section" as was commented in the header file (the comment has been corrected). This is great for performance because most DIE references are compile unit relative and this means most code that accessed the DIE's offset didn't need to make it into a compile unit relative offset because it already was. When we needed to emit a DW_FORM_ref_addr though, we needed to find the absolute offset of the DIE by finding the DIE's compile/type unit. This class did have the absolute debug info/type offset and could be added to the CU relative offset to compute the absolute offset. With this change we can easily get back to a DIE's DIEUnit which will have this needed offset. Prior to this is required having a DwarfDebug and required calling:
DwarfCompileUnit *DwarfDebug::lookupUnit(const DIE *CU) const;
Now we can use the DIEUnit class to do so without needing DwarfDebug. All clients now use DIEUnit objects (the DwarfDebug stack and the DwarfLinker). A follow on patch for the DWARF generator will also take advantage of this.
Differential Revision: https://reviews.llvm.org/D27170
llvm-svn: 288399
Most of the exception handling members in MachineModuleInfo is actually
per function data (talks about the "current function") so it is better
to keep it at the function instead of the module.
This is a necessary step to have machine module passes work properly.
Also:
- Rename TidyLandingPads() to tidyLandingPads()
- Use doxygen member groups instead of "//===- EH ---"... so it is clear
where a group ends.
- I had to add an ugly const_cast at two places in the AsmPrinter
because the available MachineFunction pointers are const, but the code
wants to call tidyLandingPads() in between
(markFunctionEnd()/endFunction()).
Differential Revision: https://reviews.llvm.org/D27227
llvm-svn: 288293
VariableDbgInfo is per function data, so it makes sense to have it with
the function instead of the module.
This is a necessary step to have machine module passes work properly.
Differential Revision: https://reviews.llvm.org/D27186
llvm-svn: 288292
This is per function data so it is better kept at the function instead
of the module.
This is a necessary step to have machine module passes work properly.
Differential Revision: https://reviews.llvm.org/D27185
llvm-svn: 288291
The LLDB tests are now ready for this patch.
DWARF specifies that "line 0" really means "no appropriate source
location" in the line table. Use this for branch targets and some
other cases that have no specified source location, to prevent
inheriting unfortunate line numbers from physically preceding
instructions (which might be from completely unrelated source).
Differential Revision: http://reviews.llvm.org/D24180
llvm-svn: 288283
No test case necessary as the problematic condition is checked with the
newly introduced assertAllSuperRegsMarked() function.
Differential Revision: https://reviews.llvm.org/D26648
llvm-svn: 288277
Summary: Further preparation for the expansion of MUL_LOHI added in D24956.
Reviewers: efriedma, RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D27064
llvm-svn: 288248
DWARF specifies that "line 0" really means "no appropriate source
location" in the line table. Use this for branch targets and some
other cases that have no specified source location, to prevent
inheriting unfortunate line numbers from physically preceding
instructions (which might be from completely unrelated source).
Differential Revision: http://reviews.llvm.org/D24180
llvm-svn: 288212
Summary:
The code in LiveRangeEdit::eliminateDeadDef() that computes isOrigDef
doesn't handle instructions in which operand 0 is not a def (e.g. KILL)
correctly. Add a check that operand 0 is a def before doing the rest of
the isOrigDef computation.
Reviewers: qcolombet, MatzeB, wmi
Subscribers: mcrosier, llvm-commits
Differential Revision: https://reviews.llvm.org/D27174
llvm-svn: 288189
It looks like this logic was duplicated long ago and the GCC side of
things has grown additional functionality. We need ${:uid} at least to
generate unique MS inline asm labels (PR23715), so expose these.
llvm-svn: 288092
This makes the createGenericSchedLive() function that constructs the
default scheduler available for the public API. This should help when
you want to get a scheduler and the default list of DAG mutations.
This also shrinks the list of default DAG mutations:
{Load|Store}ClusterDAGMutation and MacroFusionDAGMutation are no longer
added by default. Targets can easily add them if they need them. It also
makes it easier for targets to add alternative/custom macrofusion or
clustering mutations while staying with the default
createGenericSchedLive(). It also saves the callback back and forth in
TargetInstrInfo::enableClusterLoads()/enableClusterStores().
Differential Revision: https://reviews.llvm.org/D26986
llvm-svn: 288057
The scavenger was not passed if requiresFrameIndexScavenging was
enabled. I need to be able to test for the availability of an
unallocatable register here, so I can't create a virtual register for
it.
It might be better to just always use the scavenger and stop
creating virtual registers.
llvm-svn: 287843
This patch makes AsmPrinter less reliant on DwarfDebug by relying on the DWARF version in the AsmPrinter's MCStreamer's MCContext. This allows us to remove the redundant DWARF version from DwarfDebug. It also lets us change code that used to access the AsmPrinter's DwarfDebug just to get to the DWARF version by changing the DWARF version accessor on AsmPrinter so that it grabs the version from its MCStreamer's MCContext.
Differential Revision: https://reviews.llvm.org/D27032
llvm-svn: 287839
We did not support subregs in InlineSpiller:foldMemoryOperand() because targets
may not deal with them correctly.
This adds a target hook to let the spiller know that a target can handle
subregs, and actually enables it for x86 for the case of stack slot reloads.
This fixes PR30832.
Differential Revision: https://reviews.llvm.org/D26521
llvm-svn: 287792
Forward store values to matching loads down through token
factors. Factored from D14834.
Reviewers: jyknight, hfinkel
Subscribers: hfinkel, nemanjai, llvm-commits
Differential Revision: https://reviews.llvm.org/D26080
llvm-svn: 287773
We have the following DAGCombiner transformations:
(mul (shl X, c1), c2) -> (mul X, c2 << c1)
(mul (shl X, C), Y) -> (shl (mul X, Y), C)
(shl (mul x, c1), c2) -> (mul x, c1 << c2)
Usually the constant shift is optimised by SelectionDAG::getNode when it is
constructed, by SelectionDAG::FoldConstantArithmetic, but when we're dealing
with vectors and one of those vector constants contains an undef element
FoldConstantArithmetic does not fold and we enter an infinite loop.
Fix this by making FoldConstantArithmetic use getNode to decide how to fold each
vector element, the same as FoldConstantVectorArithmetic does, and rather than
adding the constant shift to the work list instead only apply the transformation
if it's already been folded into a constant, as if it's not we're going to loop
endlessly. Additionally add missing NoOpaques to one of those transformations,
which I noticed when writing the tests for this.
Differential Revision: https://reviews.llvm.org/D26605
llvm-svn: 287766
Implemented widening (v2f32) and splitting (v16f64).
On splitting, I use "popcnt" to calculate memory increment.
More type legalization work will come in the next patches.
llvm-svn: 287761
TargetSubtargetInfo is filled with CodeGen specific interfaces nowadays
(getInstrInfo(), getFrameLowering(), getSelectionDAGInfo()) most of the
tuning flags like enablePostRAScheduler(), getAntiDepBreakMode(),
enableRALocalReassignment(), ... also do not seem to be universal enough
to make sense outside of CodeGen.
Differential Revision: https://reviews.llvm.org/D26948
llvm-svn: 287708
No-one actually had a mangler handy when calling this function, and
getSymbol itself went most of the way towards getting its own mangler
(with a local TLOF variable) so forcing all callers to supply one was
just extra complication.
llvm-svn: 287645
Add basic ComputeNumSignBits support for TRUNCATE ops for cases where the source's number of sign bits overlaps with the truncated size.
Improves X86 SIGN_EXTEND_IN_REG vector cases which were needlessly sign extending boolean vector results.
Differential Revision: https://reviews.llvm.org/D26851
llvm-svn: 287635
A target intrinsic may be defined as possibly reading memory,
but the call site may have additional knowledge that it doesn't read
memory. The intrinsic lowering will expect the pessimistic
assumption of the intrinsic definition, so the chain should
still be used.
llvm-svn: 287593
Summary:
Previously, CGP would unconditionally sink addrspacecast instructions,
even going so far as to sink them into a loop.
Now we check that the cast is "cheap", as defined by TLI.
We introduce a new "is-cheap" function to TLI rather than using
isNopAddrSpaceCast because some GPU platforms want the ability to ask
for non-nop casts to be sunk.
Reviewers: arsenm, tra
Subscribers: jholewinski, wdng, llvm-commits
Differential Revision: https://reviews.llvm.org/D26923
llvm-svn: 287591
The function extendPHIRanges checks the main range of the original live
interval, even when dealing with a subrange. This could also lead to an
assert when the subrange is not live at the extension point, but the
main range is. To avoid this, check the corresponding subrange of the
original live range, instead of always checking the main range.
Review (as a part of a bigger set of changes):
https://reviews.llvm.org/D26359
llvm-svn: 287571
Enable codeview emission for windows-itanium targets. Co-opt an existing
test (which is derived from a C source file and should therefore be
identical across the Itanium and MS ABIs).
Differential Revision: https://reviews.llvm.org/D26693
llvm-svn: 287567
Summary: Merging an empty case block into the header block of switch could cause
ISel to add COPY instructions in the header of switch, instead of the case
block, if the case block is used as an incoming block of a PHI. This could
potentially increase dynamic instructions, especially when the switch is in a
loop. I added a test case which was reduced from the benchmark I was targetting.
Reviewers: t.p.northover, mcrosier, manmanren, wmi, davidxl
Subscribers: qcolombet, danielcdh, hfinkel, mcrosier, llvm-commits
Differential Revision: https://reviews.llvm.org/D22696
llvm-svn: 287553
The previously used "names" are rather descriptions (they use multiple
words and contain spaces), use short programming language identifier
like strings for the "names" which should be used when exporting to
machine parseable formats.
Also removed a unused TimerGroup from Hexxagon.
Differential Revision: https://reviews.llvm.org/D25583
llvm-svn: 287369
ImplicitNullCheck keeps track of one instruction that the memory
operation depends on that it also hoists with the memory operation.
When hoisting this dependency, it would sometimes clobber a live-in
value to the basic block we were hoisting the two things out of. Fix
this by explicitly looking for such dependencies.
I also noticed two redundant checks on `MO.isDef()` in IsMIOperandSafe.
They're redundant since register MachineOperands are either Defs or Uses
-- there is no third kind. I'll change the checks to asserts in a later
commit.
llvm-svn: 287213
This patch updates a bunch of places where add_dependencies was being explicitly called to add dependencies on intrinsics_gen to instead use the DEPENDS named parameter. This cleanup is needed for a patch I'm working on to add a dependency debugging mode to the build system.
llvm-svn: 287206
They're not SelectionDAG- or FunctionLoweringInfo-specific. They
are, however, specific to building MMI from IR.
We could make them members, but it's nice having MMI be a "simple" data
structure and this logic kept separate.
This also lets us reuse them from GlobalISel.
llvm-svn: 287167
We don't track callee clobbered registers correctly, so avoid hoisting
across calls.
Note: for this bug to trigger we need a `readonly` call target, since we
already have logic to not hoist across potentially storing instructions
either.
llvm-svn: 287159
We fail to produce bit-to-bit matching stage2 and stage3 compiler in PGO
bootstrap build. The reason is because LoopBlockSet is of SmallPtrSet type
whose iterating order depends on the pointer value.
This patch fixes this issue by changing to use SmallSetVector.
Differential Revision: http://reviews.llvm.org/D26634
llvm-svn: 287148
In https://reviews.llvm.org/D25347, Geoff noticed that we still have
useless copy that we can eliminate after register allocation. At the
time the allocation is chosen for those copies, they are not useless
but, because of changes in the surrounding code, later on they might
become useless.
The Greedy allocator already has a mechanism to deal with such cases
with a late recoloring. However, we missed to record the some of the
missed hints.
This commit fixes that.
llvm-svn: 287070
Summary:
This fixes the runtime results produces by the fallback multiplication expansion introduced in r270720.
For tests I created a fuzz tester that compares the results with Boost.Multiprecision.
Reviewers: hfinkel
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D26628
llvm-svn: 286998
r286407 has introduced calls to llvm::AddLandingPadInfo, which lives in the
SelectionDAG component. Add it to LLVMBuild to avoid linker failures on Linux.
llvm-svn: 286962
For 64bit ABIs it is common practice to use relative Jump Tables with
potentially different relocation bases. As the logic for the jump table
itself doesn't depend on the relocation base, make it easier for targets
to use the generic logic. Start by dropping the now redundant MIPS logic.
Differential Revision: https://reviews.llvm.org/D26578
llvm-svn: 286951
This adds support for TSan C++ exception handling, where we need to add extra calls to __tsan_func_exit when a function is exitted via exception mechanisms. Otherwise the shadow stack gets corrupted (leaked). This patch moves and enhances the existing implementation of EscapeEnumerator that finds all possible function exit points, and adds extra EH cleanup blocks where needed.
Differential Revision: https://reviews.llvm.org/D26177
llvm-svn: 286893
The DAG mutators in the scheduler cannot really remove DAG nodes as
additional anlysis information such as ScheduleDAGToplogicalSort are
already computed at this point and rely on a fixed number of DAG nodes.
Alleviate the missing removal with a new flag: Setting the new skip
flag on a node ignores it during scheduling.
llvm-svn: 286655
Push VRegUses/collectVRegUses() down the class hierarchy towards its
only user ScheduleDAGMILive.
NFCI: The initialization of the map happens at a later point but that
should not matter.
This is in preparation to allow DAG mutators to merge nodes, which
relies on this map getting computed later.
llvm-svn: 286654
This is a partial revert of r244615 (http://reviews.llvm.org/D11942),
which caused a major regression in debug info quality.
Turning the artificial __MergedGlobal symbols into private symbols
(l__MergedGlobal) means that the linker will not include them in the
symbol table of the final executable. Without a symbol table entry
dsymutil is not be able to process the debug info for any of the
merged globals and thus drops the debug info for all of them.
This patch is enabling the old behavior for all MachO targets while
leaving all other targets unaffected.
rdar://problem/29160481
https://reviews.llvm.org/D26531
llvm-svn: 286607
Summary:
Split ReaderWriter.h which contains the APIs into both the BitReader and
BitWriter libraries into BitcodeReader.h and BitcodeWriter.h.
This is to address Chandler's concern about sharing the same API header
between multiple libraries (BitReader and BitWriter). That concern is
why we create a single bitcode library in our downstream build of clang,
which led to r286297 being reverted as it added a dependency that
created a cycle only when there is a single bitcode library (not two as
in upstream).
Reviewers: mehdi_amini
Subscribers: dlj, mehdi_amini, llvm-commits
Differential Revision: https://reviews.llvm.org/D26502
llvm-svn: 286566
addSchedBarrierDeps() is supposed to add use operands to the ExitSU
node. The current implementation adds uses for calls/barrier instruction
and the MBB live-outs in all other cases. The use
operands of conditional jump instructions were missed.
Also added code to macrofusion to set the latencies between nodes to
zero to avoid problems with the fusing nodes lingering around in the
pending list now.
Differential Revision: https://reviews.llvm.org/D25140
llvm-svn: 286544
There is no need to track dependencies for constant physregs, as they
don't change their value no matter in what order you read/write to them.
Differential Revision: https://reviews.llvm.org/D26221
llvm-svn: 286526
The generic infrastructure to compute the Newton series for reciprocal and
reciprocal square root was conceived to allow a target to compute the series
itself. However, the original code did not properly consider this condition
if returned by a target. This patch addresses the issues to allow a target
to compute the series on its own.
Differential revision: https://reviews.llvm.org/D22975
llvm-svn: 286523
When copying to/from a constant register interferences can be ignored.
Also update the documentation for isConstantPhysReg() to make it more
obvious that this transformation is valid.
Differential Revision: https://reviews.llvm.org/D26106
llvm-svn: 286503
We were failing to extract a constant splat shift value if the shifted value was being masked.
The (shl (and (setcc) N01CV) N1CV) -> (and (setcc) N01CV<<N1CV) combine was unnecessarily preventing this.
llvm-svn: 286454
The name/comment of the third argument to the ScheduleDAGMI constructor
is RemoveKillFlags and not IsPostRA. Only the comments are changed.
Review: A Trick
llvm-svn: 286350
Previously support had been added for using CodeViewRecordIO
to read (deserialize) CodeView type records. This patch adds
support for writing those same records. With this patch,
reading and writing of CodeView type records finally uses a single
codepath.
Differential Revision: https://reviews.llvm.org/D26253
llvm-svn: 286304
if it is more specific than the one in its DW_AT_specification.
If a static member is an array, the translation unit containing the
member definition may have a more specific type (including its length)
than TUs only seeing the class declaration. This patch adds a
DW_AT_type to the member's DW_TAG_variable in addition to the
DW_AT_specification in these cases. The member type in the
DW_AT_specification still shows the more generic type (without the
length) to avoid defeating type uniquing.
The DWARF standard discourages “duplicating” a DW_AT_type in a member
variable definition but doesn’t explicitly forbid it. Having the more
specific type (with the array length) available is what allows the
debugger to print the contents of a static array member variable.
https://reviews.llvm.org/D26368
rdar://problem/28706946
llvm-svn: 286302
Summary:
There are two variables here that break. This change constrains both of them to
debug builds (via DEBUG() or #ifndef NDEBUG).
Reviewers: bkramer, t.p.northover
Subscribers: mehdi_amini, vkalintiris
Differential Revision: https://reviews.llvm.org/D26421
llvm-svn: 286300
After instruction selection we perform some checks on each VReg just before
discarding the type information. These checks were assertions before, but that
breaks the fallback path so this patch moves the logic into the main flow and
reports a better error on failure.
llvm-svn: 286289
Erasing reverse_iterators is problematic; iterate manually.
While there, keep track of the range of inserted instructions.
It can miss instructions inserted elsewhere, but those are harder
to track.
Differential Revision: http://reviews.llvm.org/D22924
llvm-svn: 286272
About when we should move a vreg from CurrentNewVRegs to NewVRegs,
if the vreg in CurrentNewVRegs was added into RecoloringCandidate and was
evicted, it shouldn't be added to NewVRegs because its physical register
will be restored at the end of tryLastChanceRecoloring after the recoloring
failed. If the vreg in CurrentNewVRegs was not in RecoloringCandidate, i.e.
it was evicted in selectOrSplitImpl inside tryRecoloringCandidates, its
physical register will not be restored even if the recoloring failed. In
that case, we need to add the vreg to NewVRegs.
Same as r281783, the problem was seen on out-of-tree target and we didn't
have a test case that reproduce the problem with in-tree targets.
llvm-svn: 286259
Fixed an issue with vector usage of TargetLowering::isConstTrueVal / TargetLowering::isConstFalseVal boolean result matching.
The comment said we shouldn't handle constant splat vectors with undef elements. But the the actual code was returning false if the build vector contained no undef elements....
This patch now ignores the number of undefs (getConstantSplatNode will return null if the build vector is all undefs).
The change has also unearthed a couple of missed opportunities in AVX512 comparison code that will need to be addressed.
Differential Revision: https://reviews.llvm.org/D26031
llvm-svn: 286238
This patch avoids scalarization of CTLZ by instead expanding to use CTPOP (ref: "Hacker's Delight") when the necessary operations are available.
This also adds the necessary cost models for X86 SSE2 targets (the main beneficiary) to ensure vectorization only happens when its useful.
Differential Revision: https://reviews.llvm.org/D25910
llvm-svn: 286233
of which that is hidden inside a separate function call) and helpfully
before building expensive transaction infrastructure. This will avoid
crashing when running CGP in a generic mode if we ever managed to hit
this case.
Note that I spent some time looking at alternatives. CGP is actually
used without a TM or TLI in order to do some target-independent testing.
Further, all of the neighboring optimization techniques actually have
some paths that are effective even in the absence of TLI so this seemed
the correct scope at which to check and bypass logic. It still isn't
clear that long-term support for missing TM/TLI is the right
cost/benefit tradeoff for CGP -- we seem to get relatively little for it
and the code is just littered with checks (and assumptions which
I suspect are still missing some checks).
This at least fixes the potential bug in this code spotted by
PVS-Studio, so we've got that going for us. ;]
llvm-svn: 285987
Summary:
Have MergeConsecutiveStores explicitly return information about the stores
that were merged, so that we can safely determine whether the starting
node has been freed.
Reviewers: chandlerc, bogner, niravd
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D25601
llvm-svn: 285916
2 new intrinsics covering AVX-512 compress/expand functionality.
This implementation includes syntax, DAG builder, operation lowering and tests.
Does not include: handling of illegal data types, codegen prepare pass and the cost model.
llvm-svn: 285876
Using a pattern similar to that of YamlIO, this allows
us to have a single codepath for translating codeview
records to and from serialized byte streams. The
current patch only hooks this up to the reading of
CodeView type records. A subsequent patch will hook
it up for writing of CodeView type records, and then a
third patch will hook up the reading and writing of
CodeView symbols.
Differential Revision: https://reviews.llvm.org/D26040
llvm-svn: 285836
Summary:
Currently PreferredLoopExit is set only in buildLoopChains, which is
never called if there are no MachineLoops.
MSan is currently broken by this:
http://lab.llvm.org:8011/builders/sanitizer-x86_64-linux-fast/builds/145/steps/check-llvm%20msan/logs/stdio
This is a naive fix to get things green again. iteratee: you may have a better fix.
This change will also mean PreferredLoopExit will not carry over if
buildCFGChains() is called a second time in runOnMachineFunction, this
appears to be the right thing.
Reviewers: bkramer, iteratee, echristo
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D26069
llvm-svn: 285757
Tim Northover