These flags are now always passed to all tests and need to be disabled if
not needed. Disabling these flags, rather than passing them to almost all
tests, significantly simplfies our RUN: lines.
llvm-svn: 249422
Polly's profitability heuristic saves compile time by skipping trivial scops or
scops were we know no good optimization can be applied. For almost all our tests
this heuristic makes little sense as we aim for minimal test cases when testing
functionality. Hence, in almost all cases this heuristic is better be disabled.
In preparation of disabling Polly's compile time heuristic by default in the
test suite we first explicitly enable it in the couple of test cases that really
use it (or run with/without heuristic side-by-side).
llvm-svn: 249418
Before isValidCFG() could hide the fact that a loop is non-affine by
over-approximation. This is problematic if a subregion of the loop contains
an exit/latch block and is over-approximated. Now we do not over-approximate
in the isValidCFG function if we check loop control. If such control is
non-affine the whole loop is over-approximated, not only a subregion.
llvm-svn: 249273
This check was needed at some point but seems not useful anymore. Only
one adjustment in the domain generation was needed to cope with the
cases this check prevented from happening before.
llvm-svn: 248695
As we currently do not perform any optimizations that targets (or is
even aware) small trip counts we will skip them when we count the
loops in a region.
llvm-svn: 248119
While we do not need to model PHI nodes in the region exit (as it is not part
of the SCoP), we need to prepare for the case that the exit block is split in
code generation to create a single exiting block. If this will happen, hence
if the region did not have a single exiting block before, we will model the
operands of the PHI nodes as escaping scalars in the SCoP.
Differential Revision: http://reviews.llvm.org/D12051
llvm-svn: 247078
Instead of having two separate options
-polly-detect-scops-in-functions-without-loops and
-polly-detect-scops-in-regions-without-loops we now just use
-polly-detect-unprofitable to force the detection of scops ignoring any compile
time saving bailout heuristics.
llvm-svn: 247057
There is no reason the loops in a region need to touch either entry or exit
block. Hence, we need to look through all loops that may touch the region as
well as their children to understand if our region has at least two loops.
llvm-svn: 246433
I ran the script from r246327 and it touched all the right files;
committing now to hopefully right the bots, but if my check-polly
doesn't come back clean I'll keep looking.
http://lab.llvm.org:8011/builders/polly-amd64-linux/builds/33648
llvm-svn: 246341
If a region does not have more than one loop, we do not identify it as
a Scop in ScopDetection. The main optimizations Polly is currently performing
(tiling, preparation for outer-loop vectorization and loop fusion) are unlikely
to have a positive impact on individual loops. In some cases, Polly's run-time
alias checks or conditional hoisting may still have a positive impact, but those
are mostly enabling transformations which LLVM already performs for individual
loops. As we do not focus on individual loops, we leave them untouched to not
introduce compile time regressions and execution time noise. This results in
good compile time reduction (oourafft: -73.99%, smg2000: -56.25%).
Contributed-by: Pratik Bhatu <cs12b1010@iith.ac.in>
Reviewers: grosser
Differential Revision: http://reviews.llvm.org/D12268
llvm-svn: 246161
This test was written to check the workings of IndependentBlocks on
arrays which doesn't do such transformations anymore. The test itself
is still useful to check that the region is rejected as SCoP.
llvm-svn: 245353
Such codes are not interesting to optimize and most likely never appear in the
normal compilation flow. However, they show up during test case reduction with
bugpoint and trigger -- without this change -- an assert in
polly::MemoryAccess::foldAccess(). It is better to detect them in
ScopDetection itself and just bail out.
Contributed-by: Utpal Bora <cs14mtech11017@iith.ac.in>
Reviewers: grosser
Subscribers: pollydev, llvm-commits
Differential Revision: http://reviews.llvm.org/D11425
llvm-svn: 243515
This removes old code that has been disabled since several weeks and was hidden
behind the flags -disable-polly-intra-scop-scalar-to-array=false and
-polly-model-phi-nodes=false. Earlier, Polly used to translate scalars and
PHI nodes to single element arrays, as this avoided the need for their special
handling in Polly. With Johannes' patches adding native support for such scalar
references to Polly, this code is not needed any more. After this commit both
-polly-prepare and -polly-independent are now mostly no-ops. Only a couple of
simple transformations still remain, but they are scheduled for removal too.
Thanks again to Johannes Doerfert for his nice work in making all this code
obsolete.
llvm-svn: 240766
Remainder operations with constant divisor can be modeled as quasi-affine
expression. This patch adds support for detecting and modeling them. We also
add a test that ensures they are correctly code generated.
This patch was extracted from a larger patch contributed by Johannes Doerfert
in http://reviews.llvm.org/D5293
llvm-svn: 240518
This ensures we pass all tests independently of how we set the options
-disable-polly-intra-scop-scalar-to-array and -polly-model-phi-nodes.
(At least if we enable both or disable both. Enabling them individually makes
little sense, as they will hopefully disappear soon anyhow).
llvm-svn: 238087
Besides class, function and file names, we also change the command line option
from -polly-codegen-isl to just -polly-codegen. The isl postfix is a leftover
from the times when we still had the CLooG based -polly-codegen. Today it is
just redundant and we drop it.
llvm-svn: 237099
In the lnt benchmark MultiSource/Benchmarks/MallocBench/gs/gs with
scalar and PHI modeling we detected the multidimensional accesses
with sizes variant in the SCoP. This will check the sizes for validity.
llvm-svn: 236395
I just learned that target triples prevent test cases to be run on other
architectures. Polly test cases are until now sufficiently target independent
to not require any target triples. Hence, we drop them.
llvm-svn: 235384
This will allow the ScopInfo to build the polyhedral representation for
non-affine regions that contain loops. Such loops are basically not visible
in the SCoP representation. Accesses that are variant in such loops are
therefor represented as non-affine accesses.
Differential Revision: http://reviews.llvm.org/D8153
llvm-svn: 234713
As soon as one operand of the product is invalid, the entire product is invalid.
This happens for example if one of the operands is not loop-invariant.
This fixes http://llvm.org/PR23125
Reported-by: Jeremy Huddleston Sequoia <jeremyhu@apple.com
llvm-svn: 234119
With this patch we allow the SCoP detection to detect regions as SCoPs
which have non-affine control flow inside. All non-affine regions are
tracked and later accessible to the ScopInfo.
As there is no real difference, non-affine branches as well as
floating point branches are covered (and both called non-affine
control flow). However, the detection is restricted to
overapproximate only loop free regions.
llvm-svn: 230325
Scops that only read seem generally uninteresting and scops that only write are
most likely initializations where there is also little to optimize. To not
waste compile time we bail early.
Differential Revision: http://reviews.llvm.org/D7735
llvm-svn: 229820
The support is currently limited as we only allow them in the input but do
not emit them in the transformed SCoP due to the possible semantic changes.
Differential Revision: http://reviews.llvm.org/D5225
llvm-svn: 227054
SCEV based code generation has been the default for two weeks after having
been tested for a long time. We now drop the support the non-scev-based code
generation.
llvm-svn: 222978
Update debug info testcases for the LLVM metadata schema change in
r219010 to fold metadata constant operands into a single `MDString`.
Part of PR17891.
llvm-svn: 219019
The run-time alias check places code that involves the base pointer at the
beginning of the SCoP. This breaks if the base pointer is defined inside the
SCoP. Hence, we can only create a run-time alias check if we are sure the base
pointer is not an instruction defined inside the scop. If it is we refuse to
handle the SCoP.
This commit should unbreak most of our current LNT failures.
Differential Revision: http://reviews.llvm.org/D5483
llvm-svn: 218412
This reverts commit 215684. The intention of the commit is great, but
unfortunately it seems to be the cause of 14 LNT test suite failures:
http://lab.llvm.org:8011/builders/perf-x86_64-penryn-O3-polly/builds/116
To make our buildbots and performance testers green until this issue is solved,
we temporarily revert this commit.
llvm-svn: 215816
The support is limited to signed modulo access and condition
expressions with a constant right hand side, e.g., A[i % 2] or
A[i % 9]. Test cases are modified according to this new feature and
new test cases are added.
Differential Revision: http://reviews.llvm.org/D4843
llvm-svn: 215684
Enabling -keep-going in ScopDetection causes expansion to an invalid
Scop candidate.
Region A <- Valid candidate
|
Region B <- Invalid candidate
If -keep-going is enabled, ScopDetection would expand A to A+B because
the RejectLog is never checked for errors during expansion.
With this patch only A becomes a valid Scop.
llvm-svn: 211875
In rare cases, a region R which is itself not valid has an indirect child region
that is valid. When R becomes part of a valid region by expansion of another
region, then all children of R have to be erased from the set of valid regions.
This patch ensures that indirect children are erased in addition to direct
children.
Contributed-by: Armin Groesslinger <armin.groesslinger@uni-passau.de>
Tobias: I added a reduced test case and adjusted the logic of the patch to
only recurse until the first child is found.
llvm-svn: 200411
Array base addresses need to be invariant in the region considered. The base
address has to be computed outside the region, or, when it is computed inside,
the value must not change with the iterations of the loops. For example, when a
two-dimensional array is represented as a pointer to pointers the base address
A[i] in an access A[i][j] changes with i; therefore, such regions have to be
rejected.
Contributed by: Armin Größlinger <armin.groesslinger@uni-passau.de>
llvm-svn: 200314
We now report the following:
$ polly-clang -O3 -mllvm -polly -mllvm -polly-report test.c -c \
-gline-tables-only
note: Polly detected an optimizable loop region (scop) in function 'foo'
test.c:2: Start of scop
test.c:3: End of scop
note: Polly detected an optimizable loop region (scop) in function 'bar'
test.c:9: Start of scop
test.c:13: End of scop
llvm-svn: 197558
When a region header is part of a loop, then all entering edges of this region
should not come from the loop but outside the region. Otherwise, the loop may be
only partially part of the region, which would cause troubles in handling
induction variables.
Currently, we can only model induction variables that are either fully part of
the scop (loop induction variable) or induction variables that are scop-
invariant (parameter). A loop that is only partially part of the
scop causes troubles, as there is no good way to handle the induction
variable in the independent blocks pass.
Contributed-by: Star Tan <tanmx_star@yeah.net>
llvm-svn: 183800
We now support regions with multiple entries and multiple exits natively.
Regions are not needed to be simplified to single entry and single exit.
We need to XFAIL two test cases as this change increases the scop coverage
and uncoveres two failures in the independent blocks pass. The first failure
will be fixed in a subsequent commit, the second one is in the non-default
-polly-codegen-scev mode and still needs to be fixed.
Contributed-by: Star Tan <tanmx_star@yeah.net>
llvm-svn: 179673
Regions that have multiple entry edges are very common. A simple if condition
yields e.g. such a region:
if
/ \
then else
\ /
for_region
This for_region contains two entry edges 'then' -> 'for_region' and 'else' -> 'for_region'.
Previously we scheduled the RegionSimplify pass to translate such regions into
simple regions. With this patch, we now support them natively when the region is
in -loop-simplify form, which means the entry block should not be a loop header.
Contributed by: Star Tan <tanmx_star@yeah.net>
llvm-svn: 179586
Regions that have multiple exit edges are very common. A simple if condition
yields e.g. such a region:
if
/ \
then else
\ /
after
Region: if -> after
This regions contains the bbs 'if', 'then', 'else', but not 'after'. It has
two exit edges 'then' -> 'after' and 'else' -> 'after'.
Previously we scheduled the RegionSimplify pass to translate such regions into
simple regions. With this patch, we now support them natively.
Contributed-by: Star Tan <tanmx_star@yeah.net>
llvm-svn: 179159
Fix inspired from c2d4a0627e95c34a819b9d4ffb4db62daa78dade.
Given the following code
for (i = 0; i < 10; i++) {
;
}
S: A[i] = 0
When translate the data reference A[i] in statement S using scev, we need to
retrieve the scev of 'i' at the location of 'S'. If we do not do this the
scev that we obtain will be expressed as {0,+,1}_for and will reference loop
iterators that do not surround 'S'. What we really want is the scev to be
instantiated to the value of 'i' after the loop. This value is {10}.
This used to crash in:
int loopDimension = getLoopDepth(Expr->getLoop());
isl_aff *LAff = isl_aff_set_coefficient_si(
isl_aff_zero_on_domain(LocalSpace), isl_dim_in, loopDimension, 1);
(gdb) p Expr->dump()
{8,+,8}<nw><%do.body>
(gdb) p getLoopDepth(Expr->getLoop())
$5 = 0
isl_space *Space = isl_space_set_alloc(Ctx, 0, NbLoopSpaces);
isl_local_space *LocalSpace = isl_local_space_from_space(Space);
As we are trying to create a memory access in a stmt that is outside all loops,
LocalSpace has 0 dimensions:
(gdb) p NbLoopSpaces
$12 = 0
(gdb) p Statement.BB->dump()
if.then: ; preds = %do.end
%0 = load float* %add.ptr, align 4
store float %0, float* %q.1.reg2mem, align 4
br label %if.end.single_exit
and so the scev for %add.ptr should be taken at the place where it is used,
i.e., it should be the value on the last iteration of the do.body loop, and not
"{8,+,8}<nw><%do.body>".
llvm-svn: 179148
We now detect scops without a canonical induction variable and can generate a
polyhedral representation for them. There was no modification necessary to
code generate these scops.
llvm-svn: 177643
When using the scev based code generation, we now do not rely on the presence
of a canonical induction variable any more. This commit prepares the path to
(conditionally) disable the induction variable canonicalization pass.
llvm-svn: 177548
Tobias Grosser