Previously, this pass ran over every function in the Module if added to the pass order. With this change, it runs only over those with a GC attribute where the GC explicitly opts in. A GC can also choose which of entry safepoint polls, backedge safepoint polls, and call safepoints it wants. I hope to get these exposed as checks on the GCStrategy at some point, but for now, the checks are manual string comparisons.
llvm-svn: 230097
These are internal options. I need to go through, evaluate which are worth keeping and which not. Many of them should probably be renamed as well. Until I have time to do that, we can at least stop poluting the standard opt -help output.
llvm-svn: 230088
This should be the last cleanup on non-llvm preferred data structures. I left one use of std::set in an assertion; DenseSet didn't seem to have a tombstone for CallSite defined. That might be worth fixing, but wasn't worth it for a debug only use.
llvm-svn: 230084
I'd done the work of extracting the typedef in a previous commit, but didn't actually change it. Hopefully this will make any subtle changes easier to isolate.
llvm-svn: 230081
The notion of a range of inserted safepoint related code is no longer really applicable. This survived over from an earlier implementation. Just saving the inserted gc.statepoint and working from that is far clearer given the current code structure. Particularly when invokable statepoints get involved.
llvm-svn: 230063
Yet another chapter in the endless story. While this looks like we leave
the loop in a non-canonical state this replicates the logic in
LoopSimplify so it doesn't diverge from the canonical form in any way.
PR21968
llvm-svn: 230058
This patch introduces a new mechanism that allows IR modules to co-operatively
build pointer sets corresponding to addresses within a given set of
globals. One particular use case for this is to allow a C++ program to
efficiently verify (at each call site) that a vtable pointer is in the set
of valid vtable pointers for the class or its derived classes. One way of
doing this is for a toolchain component to build, for each class, a bit set
that maps to the memory region allocated for the vtables, such that each 1
bit in the bit set maps to a valid vtable for that class, and lay out the
vtables next to each other, to minimize the total size of the bit sets.
The patch introduces a metadata format for representing pointer sets, an
'@llvm.bitset.test' intrinsic and an LTO lowering pass that lays out the globals
and builds the bitsets, and documents the new feature.
Differential Revision: http://reviews.llvm.org/D7288
llvm-svn: 230054
When doing style cleanup, I noticed a minor bug in this code. If we have a pointer that we think is unused after a statepoint and thus doesn't need relocation, we store a null pointer into the alloca we're about to promote. This helps turn a mistake in liveness analysis into an easily debuggable crash. It turned out this code had never been updated to handle invoke statepoints.
There's no test for this. Without a bug in liveness, it appears impossible to make this trigger in a way which is visible in the resulting IR. We might store the null, but when promoting the alloca, there will be no uses and thus nothing to test against. Suggestions on how to test are very welcome.
llvm-svn: 230047
Starting to update variable naming and types to match LLVM style. This will be an incremental process to minimize the chance of breakage as I work. Step one, rename member variables to LLVM CamelCase and use llvm's ADT. Much more to come.
llvm-svn: 230042
Before calling Function::getGC to test for enablement, we need to make sure there's actually a GC at all via Function::hasGC. Otherwise, we'd crash on functions without a GC. Thankfully, this only mattered if you manually scheduled the pass, but still, oops. :(
llvm-svn: 230040
This change addresses a deficiency pointed out in PR22629. To copy from the bug
report:
[from the bug report]
Consider this code:
int f(int x) {
int a[] = {12};
return a[x];
}
GCC knows to optimize this to
movl $12, %eax
ret
The code generated by recent Clang at -O3 is:
movslq %edi, %rax
movl .L_ZZ1fiE1a(,%rax,4), %eax
retq
.L_ZZ1fiE1a:
.long 12 # 0xc
[end from the bug report]
This definitely seems worth fixing. I've also seen this kind of code before (as
the base case of generic vector wrapper templates with one element).
The general idea is to look at the GEP feeding a load or a store, which has
some variable as its first non-zero index, and determine if that index must be
zero (or else an out-of-bounds access would occur). We can do this for allocas
and globals with constant initializers where we know the maximum size of the
underlying object. When we find such a GEP, we create a new one for the memory
access with that first variable index replaced with a constant zero.
Even if we can't eliminate the memory access (and sometimes we can't), it is
still useful because it removes unnecessary indexing calculations.
llvm-svn: 229959
When back merging the changes in 229945 I noticed that I forgot to mark the test cases with the appropriate GC. We want the rewriting to be off by default (even when manually added to the pass order), not on-by default. To keep the current test working, mark them as using the statepoint-example GC and whitelist that GC.
Longer term, we need a better selection mechanism here for both actual usage and testing. As I migrate more tests to the in tree version of this pass, I will probably need to update the enable/disable logic as well.
llvm-svn: 229954
This patch consists of a single pass whose only purpose is to visit previous inserted gc.statepoints which do not have gc.relocates inserted yet, and insert them. This can be used either immediately after IR generation to perform 'early safepoint insertion' or late in the pass order to perform 'late insertion'.
This patch is setting the stage for work to continue in tree. In particular, there are known naming and style violations in the current patch. I'll try to get those resolved over the next week or so. As I touch each area to make style changes, I need to make sure we have adequate testing in place. As part of the cleanup, I will be cleaning up a collection of test cases we have out of tree and submitting them upstream. The tests included in this change are very basic and mostly to provide examples of usage.
The pass has several main subproblems it needs to address:
- First, it has identify any live pointers. In the current code, the use of address spaces to distinguish pointers to GC managed objects is hard coded, but this will become parametrizable in the near future. Note that the current change doesn't actually contain a useful liveness analysis. It was seperated into a followup change as the code wasn't ready to be shared. Instead, the current implementation just considers any dominating def of appropriate pointer type to be live.
- Second, it has to identify base pointers for each live pointer. This is a fairly straight forward data flow algorithm.
- Third, the information in the previous steps is used to actually introduce rewrites. Rather than trying to do this by hand, we simply re-purpose the code behind Mem2Reg to do this for us.
llvm-svn: 229945
This is different from CanAlterRefCount since CanDecrementRefCount is
attempting to prove specifically whether or not an instruction can
decrement instead of the more general question of whether it can
decrement or increment.
llvm-svn: 229936
This is much better than the previous manner of just using
short-curcuiting booleans from:
1. A "naive" efficiency perspective: we do not have to rely on the
compiler to change the short circuiting boolean operations into a
switch.
2. An understanding perspective by making the implicit behavior of
negative predicates explicit.
3. A maintainability perspective through the covered switch flag making
it easy to know where to update code when adding new ARCInstKinds.
llvm-svn: 229906
The only difference between these two is that VectorizerReport adds a
vectorizer-specific prefix to its messages. When LAA is used in the
vectorizer context the prefix is added when we promote the
LoopAccessReport into a VectorizerReport via one of the constructors.
This is part of the patchset that converts LoopAccessAnalysis into an
actual analysis pass.
llvm-svn: 229897
When I split out LoopAccessReport from this, I need to create some temps
so constness becomes necessary.
This is part of the patchset that converts LoopAccessAnalysis into an
actual analysis pass.
llvm-svn: 229896
Also add pass name as an argument to VectorizationReport::emitAnalysis.
This is part of the patchset that converts LoopAccessAnalysis into an
actual analysis pass.
llvm-svn: 229894
This is a function pass that runs the analysis on demand. The analysis
can be initiated by querying the loop access info via LAA::getInfo. It
either returns the cached info or runs the analysis.
Symbolic stride information continues to reside outside of this analysis
pass. We may move it inside later but it's not a priority for me right
now. The idea is that Loop Distribution won't support run-time stride
checking at least initially.
This means that when querying the analysis, symbolic stride information
can be provided optionally. Whether stride information is used can
invalidate the cache entry and rerun the analysis. Note that if the
loop does not have any symbolic stride, the entry should be preserved
across Loop Distribution and LV.
Since currently the only user of the pass is LV, I just check that the
symbolic stride information didn't change when using a cached result.
On the LV side, LoopVectorizationLegality requests the info object
corresponding to the loop from the analysis pass. A large chunk of the
diff is due to LAI becoming a pointer from a reference.
A test will be added as part of the -analyze patch.
Also tested that with AVX, we generate identical assembly output for the
testsuite (including the external testsuite) before and after.
This is part of the patchset that converts LoopAccessAnalysis into an
actual analysis pass.
llvm-svn: 229893
LAA will be an on-demand analysis pass, so we need to cache the result
of the analysis. canVectorizeMemory is renamed to analyzeLoop which
computes the result. canVectorizeMemory becomes the query function for
the cached result.
This is part of the patchset that converts LoopAccessAnalysis into an
actual analysis pass.
llvm-svn: 229892
The transformation passes will query this and then emit them as part of
their own report. The currently only user LV is modified to do just
that.
This is part of the patchset that converts LoopAccessAnalysis into an
actual analysis pass.
llvm-svn: 229891
As LAA is becoming a pass, we can no longer pass the params to its
constructor. This changes the command line flags to have external
storage. These can now be accessed both from LV and LAA.
VectorizerParams is moved out of LoopAccessInfo in order to shorten the
code to access it.
This commits also has the fix (D7731) to the break dependence cycle
between the analysis and vector libraries.
This is part of the patchset that converts LoopAccessAnalysis into an
actual analysis pass.
llvm-svn: 229890
This reverts commit r229651.
I'd like to ultimately revert r229650 but this reformat stands in the
way. I'll reformat the affected files once the the loop-access pass is
fully committed.
llvm-svn: 229889
The RCIdentity root ("Reference Count Identity Root") of a value V is a
dominating value U for which retaining or releasing U is equivalent to
retaining or releasing V. In other words, ARC operations on V are
equivalent to ARC operations on U.
This is a useful property to ascertain since we can use this in the ARC
optimizer to make it easier to match up ARC operations by always mapping
ARC operations to RCIdentityRoots instead of pointers themselves. Then
we perform pairing of retains, releases which are applied to the same
RCIdentityRoot.
In general, the two ways that we see RCIdentical values in ObjC are via:
1. PointerCasts
2. Forwarding Calls that return their argument verbatim.
As such in ObjC, two RCIdentical pointers must always point to the same
memory location.
Previously this concept was implicit in the code and various methods
that dealt with this concept were given functional names that did not
conform to any name in the "ARC" model. This often times resulted in
code that was hard for the non-ARC acquanted to understand resulting in
unhappiness and confusion.
llvm-svn: 229796
Don't spend the entire iteration space in the scalar loop prologue if
computing the trip count overflows. This change also gets rid of the
backedge check in the prologue loop and the extra check for
overflowing trip-count.
Differential Revision: http://reviews.llvm.org/D7715
llvm-svn: 229731
r229622: "[LoopAccesses] Make VectorizerParams global"
r229623: "[LoopAccesses] Stash the report from the analysis rather than emitting it"
r229624: "[LoopAccesses] Cache the result of canVectorizeMemory"
r229626: "[LoopAccesses] Create the analysis pass"
r229628: "[LoopAccesses] Change debug messages from LV to LAA"
r229630: "[LoopAccesses] Add canAnalyzeLoop"
r229631: "[LoopAccesses] Add missing const to APIs in VectorizationReport"
r229632: "[LoopAccesses] Split out LoopAccessReport from VectorizerReport"
r229633: "[LoopAccesses] Add -analyze support"
r229634: "[LoopAccesses] Change LAA:getInfo to return a constant reference"
r229638: "Analysis: fix buildbots"
llvm-svn: 229650
The only difference between these two is that VectorizerReport adds a
vectorizer-specific prefix to its messages. When LAA is used in the
vectorizer context the prefix is added when we promote the
LoopAccessReport into a VectorizerReport via one of the constructors.
This is part of the patchset that converts LoopAccessAnalysis into an
actual analysis pass.
llvm-svn: 229632
When I split out LoopAccessReport from this, I need to create some temps
so constness becomes necessary.
This is part of the patchset that converts LoopAccessAnalysis into an
actual analysis pass.
llvm-svn: 229631
Also add pass name as an argument to VectorizationReport::emitAnalysis.
This is part of the patchset that converts LoopAccessAnalysis into an
actual analysis pass.
llvm-svn: 229628
This is a function pass that runs the analysis on demand. The analysis
can be initiated by querying the loop access info via LAA::getInfo. It
either returns the cached info or runs the analysis.
Symbolic stride information continues to reside outside of this analysis
pass. We may move it inside later but it's not a priority for me right
now. The idea is that Loop Distribution won't support run-time stride
checking at least initially.
This means that when querying the analysis, symbolic stride information
can be provided optionally. Whether stride information is used can
invalidate the cache entry and rerun the analysis. Note that if the
loop does not have any symbolic stride, the entry should be preserved
across Loop Distribution and LV.
Since currently the only user of the pass is LV, I just check that the
symbolic stride information didn't change when using a cached result.
On the LV side, LoopVectorizationLegality requests the info object
corresponding to the loop from the analysis pass. A large chunk of the
diff is due to LAI becoming a pointer from a reference.
A test will be added as part of the -analyze patch.
Also tested that with AVX, we generate identical assembly output for the
testsuite (including the external testsuite) before and after.
This is part of the patchset that converts LoopAccessAnalysis into an
actual analysis pass.
llvm-svn: 229626
blockNeedsPredication is in LoopAccess in order to share it with the
vectorizer. It's a utility needed by LoopAccess not strictly provided
by it but it's a good place to share it. This makes the function static
so that it no longer required to create an LoopAccessInfo instance in
order to access it from LV.
This was actually causing problems because it would have required
creating LAI much earlier that LV::canVectorizeMemory().
This is part of the patchset that converts LoopAccessAnalysis into an
actual analysis pass.
llvm-svn: 229625
LAA will be an on-demand analysis pass, so we need to cache the result
of the analysis. canVectorizeMemory is renamed to analyzeLoop which
computes the result. canVectorizeMemory becomes the query function for
the cached result.
This is part of the patchset that converts LoopAccessAnalysis into an
actual analysis pass.
llvm-svn: 229624
The transformation passes will query this and then emit them as part of
their own report. The currently only user LV is modified to do just
that.
This is part of the patchset that converts LoopAccessAnalysis into an
actual analysis pass.
llvm-svn: 229623
As LAA is becoming a pass, we can no longer pass the params to its
constructor. This changes the command line flags to have external
storage. These can now be accessed both from LV and LAA.
VectorizerParams is moved out of LoopAccessInfo in order to shorten the
code to access it.
This is part of the patchset that converts LoopAccessAnalysis into an
actual analysis pass.
llvm-svn: 229622
LoopAccessAnalysis will be used as the name of the pass.
This is part of the patchset that converts LoopAccessAnalysis into an
actual analysis pass.
llvm-svn: 229621
InstCombiner::visitGetElementPtrInst was using getFirstNonPHI to compute the
insertion point, which caused the verifier to complain when a GEP was inserted
before a landingpad instruction. This commit fixes it to use getFirstInsertionPt
instead.
rdar://problem/19394964
llvm-svn: 229619
When visiting the initial list of "root" instructions (those which must always
be alive), for those that are integer-valued (such as invokes returning an
integer), we mark their bits as (initially) all dead (we might, obviously, find
uses of those bits later, but all bits are assumed dead until proven
otherwise). Don't do so, however, if we're already seen a use of those bits by
another root instruction (such as a store).
Fixes a miscompile of the sanitizer unit tests on x86_64.
Also, add a debug line for visiting the root instructions, and remove a debug
line which tried to print instructions being removed (printing dead
instructions is dangerous, and can sometimes crash).
llvm-svn: 229618
The problem was in store-sink barrier check.
Store sink barrier should be checked for ModRef (read-write) mode.
http://llvm.org/bugs/show_bug.cgi?id=22613
llvm-svn: 229495
BDCE is a bit-tracking dead code elimination pass. It is based on ADCE (the
"aggressive DCE" pass), with the added capability to track dead bits of integer
valued instructions and remove those instructions when all of the bits are
dead.
Currently, it does not actually do this all-bits-dead removal, but rather
replaces the instruction's uses with a constant zero, and lets instcombine (and
the later run of ADCE) do the rest. Because we essentially get a run of ADCE
"for free" while tracking the dead bits, we also do what ADCE does and removes
actually-dead instructions as well (this includes instructions newly trivially
dead because all bits were dead, but not all such instructions can be removed).
The motivation for this is a case like:
int __attribute__((const)) foo(int i);
int bar(int x) {
x |= (4 & foo(5));
x |= (8 & foo(3));
x |= (16 & foo(2));
x |= (32 & foo(1));
x |= (64 & foo(0));
x |= (128& foo(4));
return x >> 4;
}
As it turns out, if you order the bit-field insertions so that all of the dead
ones come last, then instcombine will remove them. However, if you pick some
other order (such as the one above), the fact that some of the calls to foo()
are useless is not locally obvious, and we don't remove them (without this
pass).
I did a quick compile-time overhead check using sqlite from the test suite
(Release+Asserts). BDCE took ~0.4% of the compilation time (making it about
twice as expensive as ADCE).
I've not looked at why yet, but we eliminate instructions due to having
all-dead bits in:
External/SPEC/CFP2006/447.dealII/447.dealII
External/SPEC/CINT2006/400.perlbench/400.perlbench
External/SPEC/CINT2006/403.gcc/403.gcc
MultiSource/Applications/ClamAV/clamscan
MultiSource/Benchmarks/7zip/7zip-benchmark
llvm-svn: 229462
We won't find a root with index zero in any loop that we are able to reroll.
However, we may find one in a non-rerollable loop, so bail gracefully instead
of failing hard.
llvm-svn: 229406
If a PHI has no users, don't crash; bail gracefully. This shouldn't
happen often, but we can make no guarantees that previous passes didn't leave
dead code around.
llvm-svn: 229405
The "dereferenceable" attribute cannot be added via .addAttribute(),
since it also expects a size in bytes. AttrBuilder#addAttribute or
AttributeSet#addAttribute is wrapped by classes Function, InvokeInst,
and CallInst. Add corresponding wrappers to
AttrBuilder#addDereferenceableAttr.
Having done this, propagate the dereferenceable attribute via
gc.relocate, adding a test to exercise it. Note that -datalayout is
required during execution over and above -instcombine, because
InstCombine only optionally requires DataLayoutPass.
Differential Revision: http://reviews.llvm.org/D7510
llvm-svn: 229265
Canonicalize access to function attributes to use the simpler API.
getAttributes().getAttribute(AttributeSet::FunctionIndex, Kind)
=> getFnAttribute(Kind)
getAttributes().hasAttribute(AttributeSet::FunctionIndex, Kind)
=> hasFnAttribute(Kind)
llvm-svn: 229202
If we know that the sign bit of a value being sign extended is zero, we can use a zero extension instead. This is motivated by the fact that zero extensions are generally cheaper on x86 (and most other architectures?). We already apply a similar transform in DAGCombine, this just extends that to the IR level.
This comes up when we eagerly canonicalize gep indices to the width of a machine register (i64 on x86_64). To do so, we insert sign extensions (sext) to promote smaller types.
Differential Revision: http://reviews.llvm.org/D7255
llvm-svn: 229189
This patch fixes a problem I accidentally introduced in an instruction combine
on select instructions added at r227197. That revision taught the instruction
combiner how to fold a cttz/ctlz followed by a icmp plus select into a single
cttz/ctlz with flag 'is_zero_undef' cleared.
However, the new rule added at r227197 would have produced wrong results in the
case where a cttz/ctlz with flag 'is_zero_undef' cleared was follwed by a
zero-extend or truncate. In that case, the folded instruction would have
been inserted in a wrong location thus leaving the CFG in an inconsistent
state.
This patch fixes the problem and add two reproducible test cases to
existing test 'InstCombine/select-cmp-cttz-ctlz.ll'.
llvm-svn: 229124
LLVM's include tree and the use of using declarations to hide the
'legacy' namespace for the old pass manager.
This undoes the primary modules-hostile change I made to keep
out-of-tree targets building. I sent an email inquiring about whether
this would be reasonable to do at this phase and people seemed fine with
it, so making it a reality. This should allow us to start bootstrapping
with modules to a certain extent along with making it easier to mix and
match headers in general.
The updates to any code for users of LLVM are very mechanical. Switch
from including "llvm/PassManager.h" to "llvm/IR/LegacyPassManager.h".
Qualify the types which now produce compile errors with "legacy::". The
most common ones are "PassManager", "PassManagerBase", and
"FunctionPassManager".
llvm-svn: 229094
The issues with the new unroll analyzer are more fundamental than code
cleanup, algorithm, or data structure changes. I've sent an email to the
original commit thread with details and a proposal for how to redesign
things. I'm disabling this for now so that we don't spend time
debugging issues with it in its current state.
llvm-svn: 229064
- First, there's a crash when we try to combine that pointers into `icmp`
directly by creating a `bitcast`, which is invalid if that two pointers are
from different address spaces.
- It's not always appropriate to cast one pointer to another if they are from
different address spaces as that is not no-op cast. Instead, we only combine
`icmp` from `ptrtoint` if that two pointers are of the same address space.
llvm-svn: 229063
UnrollAnalyzer.
Now they share a single worklist and have less implicit state between
them. There was no real benefit to separating these two things out.
I'm going to subsequently refactor things to share even more code.
llvm-svn: 229062
contained in it each time we try to add it to the worklist, just check
this when pulling it off the worklist. That way we do it at most once
per instruction with the cost of the worklist set we would need to pay
anyways.
llvm-svn: 229060
vector.
In addition to dramatically reducing the work required for contrived
example loops, this also has to correct some serious latent bugs in the
cost computation. Previously, we might add an instruction onto the
worklist once for every load which it used and was simplified. Then we
would visit it many times and accumulate "savings" each time.
I mean, fortunately this couldn't matter for things like calls with 100s
of operands, but even for binary operators this code seems like it must
be double counting the savings.
I just noticed this by inspection and due to the runtime problems it can
introduce, I don't have any test cases for cases where the cost produced
by this routine is unacceptable.
llvm-svn: 229059
In the unroll analyzer, it is checking each user to see if that user
will become dead. However, it first checked if that user was missing
from the simplified values map, and then if was also missing from the
dead instructions set. We add everything from the simplified values map
to the dead instructions set, so the first step is completely subsumed
by the second. Moreover, the first step requires *inserting* something
into the simplified value map which isn't what we want at all.
This also replaces a dyn_cast with a cast as an instruction cannot be
used by a non-instruction.
llvm-svn: 229057
check.
Also hoist this into the enqueue process as it is faster even than
testing the worklist set, we should just directly filter these out much
like we filter out constants and such.
llvm-svn: 229056
We don't just want to handle duplicate operands within an instruction,
but also duplicates across operands of different instructions. I should
have gone straight to this, but I had convinced myself that it wasn't
going to be necessary briefly. I've come to my senses after chatting
more with Nick, and am now happier here.
llvm-svn: 229054
reasonably quickly.
I don't have a reduced test case, but for a version of FFMPEG, this
makes the loop unroller start finishing at all (after over 15 minutes of
running, it hadn't terminated for me, no idea if it was a true infloop
or just exponential work).
The key thing here is to check the DeadInstructions set when pulling
things off the worklist. Without this, we would re-walk the user list of
already dead instructions again and again and again. Consider phi nodes
with many, many operands and other patterns.
The other important aspect of this is that because we would keep
re-visiting instructions that were already known dead, we kept adding
their cost savings to this! This would cause our cost savings to be
*insanely* inflated from this.
While I was here, I also rotated the operand walk out of the worklist
loop to make the code easier to read. There is still work to be done to
minimize worklist traffic because we don't de-duplicate operands. This
means we may add the same instruction onto the worklist 1000s of times
if it shows up in 1000s of operansd to a PHI node for example.
Still, with this patch, the ffmpeg testcase I have finishes quickly and
I can't measure the runtime impact of the unroll analysis any more. I'll
probably try to do a few more cleanups to this code, but not sure how
much cleanup I can justify right now.
llvm-svn: 229038
readable.
The biggest thing that was causing me problems is recognizing the
references vs. poniters here. I also found that for maps naming the loop
variable as KeyValue helps make it obvious why you don't actually use it
directly. Finally, using 'auto' instead of 'User *' doesn't seem like
a good tradeoff. Much like with the other cases, I like to know its
a pointer, and 'User' is just as long and tells the reader a lot more.
llvm-svn: 229033
propagating of metadata.
We were propagating !nonnull metadata even when the newly formed load is
no longer of a pointer type. This is clearly broken and results in LLVM
failing the verifier and aborting. This patch just restricts the
propagation of !nonnull metadata to when we actually have a pointer
type.
This bug report and the initial version of this patch was provided by
Charles Davis! Many thanks for finding this!
We still need to add logic to round-trip the metadata correctly if we
combine from pointer types to integer types and then back by using range
metadata for the integer type loads. But this is the minimal and safe
version of the patch, which is important so we can backport it into 3.6.
llvm-svn: 229029
hard to type and read for me, and is inconsistent with the other
abbreviation in the base class "Inst". For most of these (where they are
used widely) I prefer just spelling it out as Instruction. I've changed
two of the short-lived variables to use "Inst" to match the base class.
llvm-svn: 229028
This is much more efficient. In particular, the query with the user
instruction has to insert a false for every missing instruction into the
set. This is just a cleanup a long the way to fixing the underlying
algorithm problems here.
llvm-svn: 228994
When we try to estimate number of potentially removed instructions in
loop unroller, we analyze first N iterations and then scale the
computed number by TripCount/N. We should bail out early if N is 0.
llvm-svn: 228988
We can't solve the full subgraph isomorphism problem. But we can
allow obvious cases, where for example two instructions of different
types are out of order. Due to them having different types/opcodes,
there is no ambiguity.
llvm-svn: 228931
I've built some tests in WebRTC with and without this change. With this change number of __tsan_read/write calls is reduced by 20-40%, binary size decreases by 5-10% and execution time drops by ~5%. For example:
$ ls -l old/modules_unittests new/modules_unittests
-rwxr-x--- 1 dvyukov 41708976 Jan 20 18:35 old/modules_unittests
-rwxr-x--- 1 dvyukov 38294008 Jan 20 18:29 new/modules_unittests
$ objdump -d old/modules_unittests | egrep "callq.*__tsan_(read|write|unaligned)" | wc -l
239871
$ objdump -d new/modules_unittests | egrep "callq.*__tsan_(read|write|unaligned)" | wc -l
148365
http://reviews.llvm.org/D7069
llvm-svn: 228917
Apparently some code finally started to tickle this after my
canonicalization changes to instcombine.
The bug stems from trying to form a vector type out of scalars that
aren't compatible at all. In this example, from x86_mmx values. The code
in the vectorizer that checks for reasonable types whas checking for
aggregates or vectors, but there are lots of other types that should
just never reach the vectorizer.
Debugging this was made more confusing by the lie in an assert in
VectorType::get() -- it isn't that the types are *primitive*. The types
must be integer, pointer, or floating point types. No other types are
allowed.
I've improved the assert and added a helper to the vectorizer to handle
the element type validity checks. It now re-uses the VectorType static
function and then further excludes weird target-specific types that we
probably shouldn't be touching here (x86_fp80 and ppc_fp128). Neither of
these are really reachable anyways (neither 80-bit nor 128-bit things
will get vectorized) but it seems better to just eagerly exclude such
nonesense.
I've added a test case, but while it definitely covers two of the paths
through this code there may be more paths that would benefit from test
coverage. I'm not familiar enough with the SLP vectorizer to synthesize
test cases for all of these, but was able to update the code itself by
inspection.
llvm-svn: 228899
I mistakenly thought the liveness of each "RetVal(F, i)" depended only on F. It
actually depends on the index too, which means we need to be careful about how
the results are combined before return. In particular if a single Use returns
Live, that counts for the entire object, at the granularity we're considering.
llvm-svn: 228885
Summary:
When trying to canonicalize negative constants out of
multiplication expressions, we need to check that the
constant is not INT_MIN which cannot be negated.
Reviewers: mcrosier
Reviewed By: mcrosier
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D7286
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 228872
analysis.
We're already using TTI in SimplifyCFG, so remove the hard-baked "cheapness"
heuristic and use TTI directly. Generally NFC intended, but we're using a slightly
different heuristic now so there is a slight test churn.
Test changes:
* combine-comparisons-by-cse.ll: Removed unneeded branch check.
* 2014-08-04-muls-it.ll: Test now doesn't branch but emits muleq.
* coalesce-subregs.ll: Superfluous block check.
* 2008-01-02-hoist-fp-add.ll: fadd is safe to speculate. Change to udiv.
* PhiBlockMerge.ll: Superfluous CFG checking code. Main checks still present.
* select-gep.ll: A variable GEP is not expensive, just TCC_Basic, according to the TTI.
llvm-svn: 228826
A DAGRootSet models an induction variable being used in a rerollable
loop. For example:
x[i*3+0] = y1
x[i*3+1] = y2
x[i*3+2] = y3
Base instruction -> i*3
+---+----+
/ | \
ST[y1] +1 +2 <-- Roots
| |
ST[y2] ST[y3]
There may be multiple DAGRootSets, for example:
x[i*2+0] = ... (1)
x[i*2+1] = ... (1)
x[i*2+4] = ... (2)
x[i*2+5] = ... (2)
x[(i+1234)*2+5678] = ... (3)
x[(i+1234)*2+5679] = ... (3)
This concept is similar to the "Scale" member used previously, but allows
multiple independent sets of roots based off the same induction variable.
llvm-svn: 228821
This allows IDEs to recognize the entire set of header files for
each of the core LLVM projects.
Differential Revision: http://reviews.llvm.org/D7526
Reviewed By: Chris Bieneman
llvm-svn: 228798
Add handling for __llvm_coverage_mapping to the InstrProfiling
pass. We need to make sure the constant and any profile names it
refers to are in the correct sections, which is easier and cleaner to
do here where we have to know about profiling sections anyway.
This is really tricky to test without a frontend, so I'm committing
the test for the fix in clang. If anyone knows a good way to test this
within LLVM, please let me know.
Fixes PR22531.
llvm-svn: 228793
If the landingpad of the invoke is using a personality function that
catches asynch exceptions, then it can catch a trap.
Also add some landingpads to invalid LLVM IR test cases that lack them.
Over-the-shoulder reviewed by David Majnemer.
llvm-svn: 228782
Unless we meet an insertvalue on a path from some value to a return, that value
will be live if *any* of the return's components are live, so all of those
components must be added to the MaybeLiveUses.
Previously we were deleting arguments if sub-value 0 turned out to be dead.
llvm-svn: 228731
This commit isn't using the correct context, and is transfoming calls
that are operands to loads rather than calls that are operands to an
icmp feeding into an assume. I've replied on the original review thread
with a very reduced test case and some thoughts on how to rework this.
llvm-svn: 228677
I realized that my early fix for this was overly complicated. Rather than scatter checks around in a bunch of places, just exit early when we visit the poll function itself.
Thinking about it a bit, the whole inlining mechanism used with gc.safepoint_poll could probably be cleaned up a bit. Originally, poll insertion was fused with gc relocation rewriting. It might be worth going back to see if we can simplify the chain of events now that these two are seperated. As one thought, maybe it makes sense to rewrite calls inside the helper function before inlining it to the many callers. This would require us to visit the poll function before any other functions though..
llvm-svn: 228634
for any padding introduced by SROA. In particular, do not emit debug info
for an alloca that represents only the padding introduced by a previous
iteration.
Fixes PR22495.
llvm-svn: 228632
intermediate representation. This
- increases consistency by using the same granularity everywhere
- allows for pieces < 1 byte
- DW_OP_piece didn't actually allow storing an offset.
Part of PR22495.
llvm-svn: 228631
Summary:
It's important that our users immediately know what gc.safepoint_poll
is. Also fix the style of the declaration of CreateGCStatepoint, in
preparation for another change that will wrap it.
Reviewers: reames
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D7517
llvm-svn: 228626
`DIExpression` deals with `uint64_t`, so it doesn't make sense that
`createExpression()` is created from `int64_t`. Switch to `uint64_t` to
unify them.
I've temporarily left in the `int64_t` version, which forwards to the
`uint64_t` version. I'll delete it once I've updated the callers.
llvm-svn: 228619
This is just adding really simple tests which should have been part of the original submission. When doing so, I discovered that I'd mistakenly removed required pieces when preparing the patch for upstream submission. I fixed two such bugs in this submission.
llvm-svn: 228610
wrong basic block.
This would happen when the result of an invoke was used by a phi instruction
in the invoke's normal destination block. An instruction to reload the invoke's
value would get inserted before the critical edge was split and a new basic
block (which is the correct insertion point for the reload) was created. This
commit fixes the bug by splitting the critical edge before all the reload
instructions are inserted.
Also, hoist up the code which computes the insertion point to the only place
that need that computation.
rdar://problem/15978721
llvm-svn: 228566
Some parts of DeadArgElim were only considering the individual fields
of StructTypes separately, but others (where insertvalue &
extractvalue instructions occur) also looked into ArrayTypes.
This one is an actual bug; the mismatch can lead to an argument being
considered used by a return sub-value that isn't being tracked (and
hence is dead by default). It then gets incorrectly eliminated.
llvm-svn: 228559
Previously, a non-extractvalue use of an aggregate return value meant
the entire return was considered live (the algorithm gave up
entirely). This was correct, but conservative. It's better to actually
look at that Use, making the analysis results apply to all sub-values
under consideration.
E.g.
%val = call { i32, i32 } @whatever()
[...]
ret { i32, i32 } %val
The return is using the entire aggregate (sub-values 0 and 1). We can
still simplify @whatever if we can prove that this return is itself
unused.
Also unifies the logic slightly between aggregate and non-aggregate
cases..
llvm-svn: 228558
Make assume (load (call|invoke) != null) set nonNull return attribute
for the call and invoke. Also include tests.
Differential Revision: http://reviews.llvm.org/D7107
llvm-svn: 228556
Summary:
The alias.scope metadata represents sets of things an instruction might
alias with. When generically combining the metadata from two
instructions the result must be the union of the original sets, because
the new instruction might alias with anything any of the original
instructions aliased with.
Reviewers: hfinkel
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D7490
llvm-svn: 228525
The only difference between deleteIfDeadInstruction and
RecursivelyDeleteTriviallyDeadInstructions is that the former also
manually invalidates SCEV. That's unnecessary because SCEV automatically
gets informed when an instruction is deleted via a ValueHandle. NFC.
llvm-svn: 228508
An atomic store always make the target location fully initialized (in the
current implementation). It should not store origin. Initialized memory can't
have meaningful origin, and, due to origin granularity (4 bytes) there is a
chance that this extra store would overwrite meaningfull origin for an adjacent
location.
llvm-svn: 228444
If complete-unroll could help us to optimize away N% of instructions, we
might want to do this even if the final size would exceed loop-unroll
threshold. However, we don't want to unroll huge loop, and we are add
AbsoluteThreshold to avoid that - this threshold will never be crossed,
even if we expect to optimize 99% instructions after that.
llvm-svn: 228434
It is a variation of SimplifyBinOp, but it takes into account
FastMathFlags.
It is needed in inliner and loop-unroller to accurately predict the
transformation's outcome (previously we dropped the flags and were too
conservative in some cases).
Example:
float foo(float *a, float b) {
float r;
if (a[1] * b)
r = /* a lot of expensive computations */;
else
r = 1;
return r;
}
float boo(float *a) {
return foo(a, 0.0);
}
Without this patch, we don't inline 'foo' into 'boo'.
llvm-svn: 228432
This will allow it to be shared with the new Loop Distribution pass.
getFirstInst is currently duplicated across LoopVectorize.cpp and
LoopAccessAnalysis.cpp. This is a short-term work-around until we figure out
a better solution.
NFC. (The code moved is adjusted a bit for the name of the Loop member and
that PtrRtCheck is now a reference rather than a pointer.)
llvm-svn: 228418
Normalize
select(C0, select(C1, a, b), b) -> select((C0 & C1), a, b)
select(C0, a, select(C1, a, b)) -> select((C0 | C1), a, b)
This normal form may enable further combines on the And/Or and shortens
paths for the values. Many targets prefer the other but can go back
easily in CodeGen.
Differential Revision: http://reviews.llvm.org/D7399
llvm-svn: 228409
By default, store all local variables in dynamic alloca instead of
static one. It reduces the stack space usage in use-after-return mode
(dynamic alloca will not be called if the local variables are stored
in a fake stack), and improves the debug info quality for local
variables (they will not be described relatively to %rbp/%rsp, which
are assumed to be clobbered by function calls).
llvm-svn: 228336
Complete loop unrolling can make some loads constant, thus enabling a
lot of other optimizations. To catch such cases, we look for loads that
might become constants and estimate number of instructions that would be
simplified or become dead after substitution.
Example:
Suppose we have:
int a[] = {0, 1, 0};
v = 0;
for (i = 0; i < 3; i ++)
v += b[i]*a[i];
If we completely unroll the loop, we would get:
v = b[0]*a[0] + b[1]*a[1] + b[2]*a[2]
Which then will be simplified to:
v = b[0]* 0 + b[1]* 1 + b[2]* 0
And finally:
v = b[1]
llvm-svn: 228265
We were previously doing a post-order traversal and operating on the
list in reverse, however this would occasionaly cause backedges for
loops to be visited before some of the other blocks in the loop.
We know use a reverse post-order traversal, which avoids this issue.
The reverse post-order traversal is not completely ideal, so we need
to manually fixup the list to ensure that inner loop backedges are
visited before outer loop backedges.
llvm-svn: 228186
Track unresolved nodes under distinct `MDNode`s during `MapMetadata()`,
and resolve them at the end. Previously, these cycles wouldn't get
resolved.
llvm-svn: 228180
Philip Reames