When using the per-target runtime build, it may be desirable to have
different __config_site headers for each target where all targets cannot
share a single configuration.
The layout used for libc++ headers after this change is:
```
include/
c++/
v1/
<libc++ headers except for __config_site>
<target1>/
c++/
v1/
__config_site
<target2>/
c++/
v1/
__config_site
<other targets>
```
This is the most optimal layout since it avoids duplication, the only
headers that's per-target is __config_site, all other headers are
shared across targets. This also means that we no need two
-isystem flags: one for the target-agnostic headers and one for
the target specific headers.
Differential Revision: https://reviews.llvm.org/D89013
Prior to this patch, we would generate a fancy <__config> header by
concatenating <__config_site> and <__config>. This complexifies the
build system and also increases the difference between what's tested
and what's actually installed.
This patch removes that complexity and instead simply installs <__config_site>
alongside the libc++ headers. <__config_site> is then included by <__config>,
which is much simpler. Doing this also opens the door to having different
<__config_site> headers depending on the target, which was impossible before.
It does change the workflow for testing header-only changes to libc++.
Previously, we would run `lit` against the headers in libcxx/include.
After this patch, we run it against a fake installation root of the
headers (containing a proper <__config_site> header). This makes use
closer to testing what we actually install, which is good, however it
does mean that we have to update that root before testing header changes.
Thus, we now need to run `ninja check-cxx-deps` before running `lit` by
hand.
Differential Revision: https://reviews.llvm.org/D97572
The runtimes build uses variables set by add_lit_testsuite to collect
testsuites from all the runtimes.
Differential Revision: https://reviews.llvm.org/D97913
Before this patch, we could only link against the back-deployment libc++abi
dylib. This patch allows linking against the just-built libc++abi, but
running against the back-deployment one -- just like we do for libc++.
Also, add XFAIL markup to flag expected errors.
Differential Revision: https://reviews.llvm.org/D91069
Added __cxxabi_config.h includes to resolve _LIBCXXABI_ARM_EHABI and
proper building the forces_unwindX.cpp tests for the ARM/EHABI targets.
Differential Revision: https://reviews.llvm.org/D96378
libunwind ARM EHABI does not support _Unwind_ForcedUnwind yet.
In addition, ARM EHABI makes `_Unwind_Exception` a typedef so
`struct _Unwind_Exception*` cannot be used.
Forced unwinding is like a foreign exception, which can be caught by `catch (...)` and rethrown.
If not rethrown, `__cxa_end_cath` will call `_Unwind_DeleteException` to destroy the object.
The behavior going through empty `throw()` and non-empty `throw(int)` is not
clear (https://gcc.gnu.org/bugzilla/show_bug.cgi?id=98785), so I do not add such
tests.
Differential Revision: https://reviews.llvm.org/D95200
The two operations have acted differently since Clang 8, but were
unfortunately mangled the same. The new mangling uses new "vendor
extended expression" syntax proposed in
https://github.com/itanium-cxx-abi/cxx-abi/issues/112
GCC had the same mangling problem, https://gcc.gnu.org/PR88115, and
will hopefully be switching to the same mangling as implemented here.
Additionally, fix the mangling of `__uuidof` to use the new extension
syntax, instead of its previous nonstandard special-case.
Adjusts the demangler accordingly.
Differential Revision: https://reviews.llvm.org/D93922
We create threads using std::thread in various places in the test suite.
However, the usual std::thread constructor may not work on all platforms,
e.g. on platforms where passing a stack size is required to create a thread.
This commit introduces a simple indirection that makes it easier to tweak
how threads are created inside the test suite on various platforms. Note
that tests that are purposefully calling std::thread's constructor directly
(e.g. because that is what they're testing) were not modified.
This should make the builder http://lab.llvm.org:8011/#/builders/101/ happy.
It uses gcc-9 and not Tip-Of-Trunk as its name indicates BTW.
GCC-10 passes all these tests.
Fix gcc warnings: -Wsign-compare, -Wparentheses, -Wpragmas.
Reviewed By: ldionne, #libc, #libc_abi
Differential Revision: https://reviews.llvm.org/D92099
Summary:
Before this patch, we could only link against the back-deployment libc++abi
dylib. This patch allows linking against the just-built libc++abi, but
running against the back-deployment one -- just like we do for libc++.
Also, add XFAIL markup to flag expected errors.
This is a massive revert of the following commits (from most revent to oldest):
2b9b7b5775.
529ac3319728270234f169c2087283b5aa67446e5d796645d6
After checking-in the __config_site change, a lot of things started breaking
due to widespread reliance on various aspects of libc++'s build, notably the
fact that we can include the headers from the source tree, but also reliance
on various "internal" CMake variables used by the runtimes build and compiler-rt.
These were unintended consequences of the change, and after two days, we
still haven't restored all the bots to being green. Instead, now that I
understand what specific areas this will blow up in, I should be able to
chop up the patch into smaller ones that are easier to digest.
See https://reviews.llvm.org/D89041 for more details on this adventure.
In 5d796645, we stopped looking at the LIBCXXABI_LIBCXX_INCLUDES variable,
which broke users of the Standalone build. This patch reinstates that
variable, however it must point to the *installed* path of the libc++
headers, not the libc++ headers in the source tree (which has always
been the case, but wasn't enforced before).
If LIBCXXABI_LIBCXX_INCLUDES points to the libc++ headers in the source
tree, the `__config_site` header will fail to be found.
This commit should really be named "Workaround external projects depending
on libc++ build system implementation details". It seems that the compiler-rt
build (and perhaps other projects) is relying on the fact that we copy libc++
and libc++abi headers to `<build-root>/include/c++/v1`. This was changed
by 5d796645, which moved the headers to `<build-root>/projects/libcxx/include/c++/v1`
and broke the compiler-rt build.
I'm committing this workaround to fix the compiler-rt build, but we should
remove reliance on implementation details like that. The correct way to
setup the compiler-rt build would be to "link" against the `cxx-headers`
target in CMake, or to run `install-cxx-headers` using an appropriate
installation prefix, and then manually add a `-I` path to that location.
While running this test on a bare metal target, I got an error as 'sleep' was not available on that system. As 'sleep' call is not doing anything useful for cases when _LIBCXXABI_HAS_NO_THREADS is defined. This patch puts it under this check.
Reviewed By: ldionne
Differential Revision: https://reviews.llvm.org/D89871
Prior to this patch, we would generate a fancy <__config> header by
concatenating <__config_site> and <__config>. This complexifies the
build system and also increases the difference between what's tested
and what's actually installed.
This patch removes that complexity and instead simply installs <__config_site>
alongside the libc++ headers. <__config_site> is then included by <__config>,
which is much simpler. Doing this also opens the door to having different
<__config_site> headers depending on the target, which was impossible before.
It does change the workflow for testing header-only changes to libc++.
Previously, we would run `lit` against the headers in libcxx/include.
After this patch, we run it against a fake installation root of the
headers (containing a proper <__config_site> header). This makes use
closer to testing what we actually install, which is good, however it
does mean that we have to update that root before testing header changes.
Thus, we now need to run `ninja check-cxx-deps` before running `lit` by
hand.
This commit was originally applied in 1e46d1aa3 and reverted in eb60c487
because it broke the libc++abi and libunwind test suites. This has now
been fixed.
Differential Revision: https://reviews.llvm.org/D89041
This is the libcxxabi counterpart of D89545, and would have been part
of that patch if I'd spotted it soon enough (oops). One test in
libcxxabi is using the `%lu` printf format to refer to `size_t`, which
should be `%zu`.
Reviewed By: ldionne, #libc_abi
Differential Revision: https://reviews.llvm.org/D89547
We used <iostream> in several places where we don't actually need the
full power of <iostream>, and where using basic `std::printf` is enough.
This is better, since `std::printf` can be supported on systems that don't
have a notion of locales, while <iostream> can't.
This is needed when running the tests in Freestanding mode, where main()
isn't treated specially. In Freestanding, main() doesn't get mangled as
extern "C", so whatever runtime we're using fails to find the entry point.
One way to solve this problem is to define a symbol alias from __Z4mainiPPc
to _main, however this requires all definitions of main() to have the same
mangling. Hence this commit.
The needs of back-deployment testing currently require two different
ways of running the test suite: one based on the deployment target,
and one based on the target triple. Since the triple includes all the
information we need, it's better to have just one way of doing things.
Furthermore, `--param platform=XXX` is also supersedded by using the
target triple. Previously, this parameter would serve the purpose of
controling XFAILs for availability markup errors, however it is possible
to achieve the same thing by using with_system_cxx_lib only and using
.verify.cpp tests instead, as explained in the documentation changes.
The motivation for this change is twofold:
1. This part of the Lit config has always been really confusing and
complicated, and it has been a source of bugs in the past. I have
simplified it iteratively in the past, but the complexity is still
there.
2. The deployment-target detection started failing in weird ways in
recent Clangs, breaking our CI. Instead of band-aid patching the
issue, I decided to remove the complexity altogether by using target
triples even on Apple platforms.
A follow-up to this commit will bring the test suite in line with
the recommended way of handling availability markup tests.
Summary:
Caught by HWASAN on arm64 Android (which uses ld128 for long double). This
was running the existing fuzzer.
The specific minimized fuzz input to reproduce this is:
__cxa_demangle("1\006ILeeeEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEE", 0, 0, 0);
Reviewers: eugenis, srhines, #libc_abi!
Subscribers: kristof.beyls, danielkiss, libcxx-commits
Tags: #libc_abi
Differential Revision: https://reviews.llvm.org/D77924
This test has been failing on some SDKs for a long time because we lack
a proper way of identifying the SDK version in Lit. Until that is possible,
mark the test as unsupported on Apple to restore the CI.
This allows passing parameters to the test suites without using
LLVM_LIT_ARGS. The problem is that we sometimes want to set some
Lit arguments on the CMake command line, but the Lit parameters in
a CMake cache file. If the only knob to do that is LLVM_LIT_ARGS,
the command-line entry overrides the cache one, and the parameters
set by the cache are ignored.
This fixes a current issue with the build bots that they completely
ignore the 'std' param set by Lit, because other Lit arguments are
provided via LLVM_LIT_ARGS on the CMake command-line.
As announced on libcxx-dev at [1], the old libc++ testing format is being
removed in favour of the new one. Follow-up commits will clean up the
code that is dead after the removal of this option.
[1]: http://lists.llvm.org/pipermail/libcxx-dev/2020-June/000885.html
The integration between CMake and executor selection in the new format
wasn't very flexible -- only the default executor and SSH executors were
supported.
This patch makes it possible to specify arbitrary executors with the new
format. With the new testing format, a custom executor is just a script
that gets called with a command-line to execute, and some arguments like
--env, --codesign_identity and --execdir. As such, the default executor
is just run.py.
Remote execution with the SSH executor can be achived by specifying
LIBCXX_EXECUTOR="<path-to-ssh.py> --host <host>". Similarly, arbitrary
scripts can be provided.
Instead of passing file dependencies individually, assume that the
whole content of the unique test directory is a dependency. This
simplifies the test harness significantly, by making %T the directory
that contains everything required to run a test. This also removes the
need for the %{file_dependencies} substitution, which is removed by this
patch.
Furthermore, this patch also changes the harness to execute tests locally
inside %T, so as to avoid creating a separate directory for no purpose.
This clarifies the difference between test for exception support in
libc++abi tests and support for exceptions built into libc++abi.
This also removes the rather confusing similarity between the
_LIBCXXABI_NO_EXCEPTIONS and LIBCXXABI_HAS_NO_EXCEPTIONS macros.
Finally, TEST_HAS_NO_EXCEPTIONS is also detected automatically based
on -fno-exceptions, so it doesn't have to be specified explicitly
through Lit's compile_flags.
0e04342ae0 simplified exceptions-related configurations for libc++abi
and libunwind by reusing the logic in libc++. However, it missed the fact
that libc++abi and libunwind were overriding libc++'s handling of exceptions.
This commit removes special handling in libc++abi and libunwind to use
the logic in libc++, which is the right one.
First, libc++abi doesn't need to add the no-exceptions Lit feature itself,
since that is already done in the config.py for libc++, which it reuses.
Specifically, config.enable_exceptions is set based on @LIBCXXABI_ENABLE_EXCEPTIONS@
in libc++abi's lit.cfg.in, and libc++'s config.py handles that correctly.
Secondly, libunwind's LIBUNWIND_ENABLE_EXCEPTIONS is never set (it's
probably a remnant of copy-pasting code between the runtime libraries),
so the library is always built with exceptions disabled (which makes
sense since it implements the runtime support for exceptions).
Conversely, the test suite is always run with exceptions enabled
(not sure why), but that is preserved by the default behavior of
libc++'s config.py.
Since <unwind.h> is in the SDK, not in /usr/include, the XFAILs must
be predicated on the compiler version (ideally even on the SDK version)
instead of the target system version.
Petr Hosek