Close the temporary file after the test is done using it.
If it is not closed and the file was created on NFS, it will cause the test
to fail. The problem happens in the cleanup process afterwards. It first
tries to delete the file but it is not really deleted. Afterwards, the
program fails to delete the directory containing the file, causing the whole
test to fail.
Patch by Milos Stojanovic.
llvm-svn: 360259
This patch changes the return type of sys::Process::getPageSize to
Expected<unsigned> to account for the fact that the underlying syscalls used to
obtain the page size may fail (see below).
For clients who use the page size as an optimization only this patch adds a new
method, getPageSizeEstimate, which calls through to getPageSize but discards
any error returned and substitues a "reasonable" page size estimate estimate
instead. All existing LLVM clients are updated to call getPageSizeEstimate
rather than getPageSize.
On Unix, sys::Process::getPageSize is implemented in terms of getpagesize or
sysconf, depending on which macros are set. The sysconf call is documented to
return -1 on failure. On Darwin getpagesize is implemented in terms of sysconf
and may also fail (though the manpage documentation does not mention this).
These failures have been observed in practice when highly restrictive sandbox
permissions have been applied. Without this patch, the result is that
getPageSize returns -1, which wreaks havoc on any subsequent code that was
assuming a sane page size value.
<rdar://problem/41654857>
Reviewers: dblaikie, echristo
Subscribers: kristina, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D59107
llvm-svn: 360221
Summary:
It's not uncommon for separate components to share common
Options, e.g., it's common for related Passes to share Options in
addition to the Pass specific ones.
With this change, components can use OptionCategory's to simply help
output even if some of the options are shared.
Reviewed By: MaskRay
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D61574
llvm-svn: 360179
Add support for srem() to ConstantRange so we can use it in LVI. For
srem the sign of the result matches the sign of the LHS. For the RHS
only the absolute value is important. Apart from that the logic is
like urem.
Just like for urem this is only an approximate implementation. The tests
check a few specific cases and run an exhaustive test for conservative
correctness (but not exactness).
Differential Revision: https://reviews.llvm.org/D61207
llvm-svn: 360055
Summary:
By default, `parseCommandLineOptions()` will accept either a
`-` or `--` prefix for long options -- options with names longer than
a single character.
While this change does not affect behavior, it will be helpful with a
subsequent change that requires long options use the `--` prefix.
Reviewers: rnk, thopre
Reviewed By: thopre
Subscribers: thopre, cfe-commits, hiraditya, llvm-commits
Tags: #llvm, #clang
Differential Revision: https://reviews.llvm.org/D61269
llvm-svn: 359909
Summary:
The stream contains the list of threads belonging to the process
described by the minidump. Its structure is the same as the ModuleList
stream, and in fact, I have generalized the ModuleList reading code to
handle this stream too.
Reviewers: amccarth, jhenderson, clayborg
Subscribers: llvm-commits, lldb-commits, markmentovai, zturner
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D61064
llvm-svn: 359762
Summary:
This patch is part of a patch series to add support for FileCheck
numeric expressions. This specific patch introduces the @LINE numeric
expressions.
This commit introduces a new syntax to express a relation a numeric
value in the input text must have with the line number of a given CHECK
pattern: [[#<@LINE numeric expression>]]. Further commits build on that
to express relations between several numeric values in the input text.
To help with naming, regular variables are renamed into pattern
variables and old @LINE expression syntax is referred to as legacy
numeric expression.
Compared to existing @LINE expressions, this new syntax allow arbitrary
spacing between the component of the expression. It offers otherwise the
same functionality but the commit serves to introduce some of the data
structure needed to support more general numeric expressions.
Copyright:
- Linaro (changes up to diff 183612 of revision D55940)
- GraphCore (changes in later versions of revision D55940 and
in new revision created off D55940)
Reviewers: jhenderson, chandlerc, jdenny, probinson, grimar, arichardson, rnk
Subscribers: hiraditya, llvm-commits, probinson, dblaikie, grimar, arichardson, tra, rnk, kristina, hfinkel, rogfer01, JonChesterfield
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D60384
llvm-svn: 359741
If the user passes a flag like `-version` to a program, it's more likely
they mean `--version` than `-version:`, since there's no parameter
passed. Hence, give delimited arguments a penalty of 1 if the user input
doesn't contain the delimiter or no data after it.
The motivation is that with this, lld-link can suggest "--version"
instead of "-version:" for "-version" and "-nodefaultlib" instead of
"-nodefaultlib:" for "-nodefaultlibs".
Differential Revision: https://reviews.llvm.org/D61382
llvm-svn: 359701
Prior to this, OptTable::findNearest() thought that the input `--foo`
had an editing distance of 0 from an existing flag `--foo=`, which made
it suggest flags with delimiters more often than flags without one.
After this, it correctly assigns this case an editing distance of 1.
Differential Revision: https://reviews.llvm.org/D61373
llvm-svn: 359685
Add triple tests for "wasm32-wasi" and "wasm64-wasi", and also remove the
"-musl" component from the existing wasm triple tests as we're not using that
in practice (WASI libc is derived in part from musl, but it is not fully
musl-compatible).
Differential Revision: https://reviews.llvm.org/D61334
Reviewer: sbc100
llvm-svn: 359629
Summary:
This is a redo of D60914.
The objective is to not invalidate AAManager, which is stateless, unless
there is an explicit invalidate in one of the AAResults.
To achieve this, this patch adds an API to PAC, to check precisely this:
is this analysis not invalidated explicitly == is this analysis not abandoned == is this analysis stateless, so preserved without explicitly being marked as preserved by everyone
Reviewers: chandlerc
Subscribers: mehdi_amini, jlebar, george.burgess.iv, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D61284
llvm-svn: 359622
This was first reviewed in https://reviews.llvm.org/D46776 and
landed in r332299, but got reverted because it broke the PS4
bots.
https://reviews.llvm.org/D50410 fixed this, and then this
change was re-reviewed at https://reviews.llvm.org/D50515 and
relanded in r341329. It got reverted due to causing MSan issues.
However, nobody wrote down the error message and the bot link
is dead, so I'm relanding this to capture the MSan error.
I'll then either fix it, or copy it somewhere and revert if
fixing looks difficult.
llvm-svn: 359580
Summary:
With this change, cl::ResetAllOptionOccurrences() clears
cl::list just like cl::opt, allowing users to call
cl::ParseCommandLineOptions() multiple times without interference from
previous calls.
Reviewers: rnk
Reviewed By: rnk
Subscribers: llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D61234
llvm-svn: 359522
Background: A definition generator can be attached to a JITDylib to generate
new definitions in response to queries. For example: a generator that forwards
calls to dlsym can map symbols from a dynamic library into the JIT process on
demand.
If definition generation fails then the generator should be able to return an
error. This allows the JIT API to distinguish between the case where a
generator does not provide a definition, and the case where it was not able to
determine whether it provided a definition due to an error.
The immediate motivation for this is cross-process symbol lookups: If the
remote-lookup generator is attached to a JITDylib early in the search list, and
if a generator failure is misinterpreted as "no definition in this JITDylib" then
lookup may continue and bind to a different definition in a later JITDylib, which
is a bug.
llvm-svn: 359521
lld-link used to write PDB files that DIA couldn't recover natvis
files from if:
- The global strings table was > 64kiB
- There were at least 3 natvis files
The cause was that the hash function for the /src/headerblock stream
was incorrect: It needs to be truncated to 16 bit.
If the global strings table was <= 64kiB, truncating to 16 bit is a
no-op, so this wasn't needed for small programs.
If there are only 1 or 2 natvis files, then the growth strategy in
HashTable::grow() would mean the hash table would have 2 buckets (for 1
natvis file) or 4 buckets (for 4 natvis files), and since the hash
function is used modulo number of buckets, and since 2 and 4 divide
0x10000, the missing `% 0x10000` is a no-op there too. For 3 natvis
files, the hash table grows to 6 buckets, which has a factor that's not
common with 0x10000 and the difference starts to matter.
Fixes PR41626.
Differential Revision: https://reviews.llvm.org/D61277
llvm-svn: 359515
Summary:
This patch is part of a patch series to add support for FileCheck
numeric expressions. This specific patch gives earlier and better
diagnostics for the @LINE expressions.
Rather than detect parsing errors at matching time, this commit adds
enhance parsing to detect issues with @LINE expressions at parse time
and diagnose them more accurately.
Copyright:
- Linaro (changes up to diff 183612 of revision D55940)
- GraphCore (changes in later versions of revision D55940 and
in new revision created off D55940)
Reviewers: jhenderson, chandlerc, jdenny, probinson, grimar, arichardson, rnk
Subscribers: hiraditya, llvm-commits, probinson, dblaikie, grimar, arichardson, tra, rnk, kristina, hfinkel, rogfer01, JonChesterfield
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D60383
llvm-svn: 359475
Summary:
This patch is part of a patch series to add support for FileCheck
numeric expressions. This specific patch gives earlier and better
diagnostics for the -D option.
Prior to this change, parsing of -D option was very loose: it assumed
that there is an equal sign (which to be fair is now checked by the
FileCheck executable) and that the part on the left of the equal sign
was a valid variable name. This commit adds logic to ensure that this
is the case and gives diagnostic when it is not, making it clear that
the issue came from a command-line option error. This is achieved by
sharing the variable parsing code into a new function ParseVariable.
Copyright:
- Linaro (changes up to diff 183612 of revision D55940)
- GraphCore (changes in later versions of revision D55940 and
in new revision created off D55940)
Reviewers: jhenderson, chandlerc, jdenny, probinson, grimar, arichardson, rnk
Subscribers: hiraditya, llvm-commits, probinson, dblaikie, grimar, arichardson, tra, rnk, kristina, hfinkel, rogfer01, JonChesterfield
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D60382
llvm-svn: 359447
I got confused on the terminology, and the change in D60598 was not
correct. I was thinking of "exact" in terms of the result being
non-approximate. However, the relevant distinction here is whether
the result is
* Largest range such that:
Forall Y in Other: Forall X in Result: X BinOp Y does not wrap.
(makeGuaranteedNoWrapRegion)
* Smallest range such that:
Forall Y in Other: Forall X not in Result: X BinOp Y wraps.
(A hypothetical makeAllowedNoWrapRegion)
* Both. (makeExactNoWrapRegion)
I'm adding a separate makeExactNoWrapRegion method accepting a
single APInt (same as makeExactICmpRegion) and using it in the
places where the guarantee is relevant.
Differential Revision: https://reviews.llvm.org/D60960
llvm-svn: 359402
Add support for abs() to ConstantRange. This will allow to handle
SPF_ABS select flavor in LVI and will also come in handy as a
primitive for the srem implementation.
The implementation is slightly tricky, because a) abs of signed min
is signed min and b) sign-wrapped ranges may have an abs() that is
smaller than a full range, so we need to explicitly handle them.
Differential Revision: https://reviews.llvm.org/D61084
llvm-svn: 359321
When failing materialization of a symbol X, remove X from the dependants list
of any of X's dependencies. This ensures that when X's dependencies are
emitted (or fail themselves) they do not try to access the no-longer-existing
MaterializationInfo for X.
llvm-svn: 359252
Summary:
There's still a little bit of constant factor that could be trimmed (e.g.
more overloads to avoid round-tripping primitives through json::Value).
But this solves the memory scaling problem, and greatly improves the performance
constant factor, and the API should leave room for optimization if needed.
Adapt TimeProfiler to use it, eliminating almost all the performance regression
from r358476.
Performance test on my machine:
perf stat -r 5 ~/llvmbuild-opt/bin/clang++ -w -S -ftime-trace -mllvm -time-trace-granularity=0 spirit.cpp
Handcrafted JSON (HEAD=r358532 with r358476 reverted): 2480ms
json::Value (HEAD): 2757ms (+11%)
After this patch: 2520 ms (+1.6%)
Reviewers: anton-afanasyev, lebedev.ri
Subscribers: kristina, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D60804
llvm-svn: 359186
Summary:
Annotations allow writing nice-looking unit test code when one needs
access to locations from the source code, e.g. running code completion
at particular offsets in a file. See comments in Annotations.cpp for
more details on the API.
Also got rid of a duplicate annotations parsing code in clang's code
complete tests.
Reviewers: gribozavr, sammccall
Reviewed By: gribozavr
Subscribers: mgorny, hiraditya, ioeric, MaskRay, jkorous, arphaman, kadircet, jdoerfert, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D59814
llvm-svn: 359179
* Add support for uniquing strings in the remark streamer and emitting the string table in the remarks section.
* Add parsing support for the string table in the RemarkParser.
From this remark:
```
--- !Missed
Pass: inline
Name: NoDefinition
DebugLoc: { File: 'test-suite/SingleSource/UnitTests/2002-04-17-PrintfChar.c',
Line: 7, Column: 3 }
Function: printArgsNoRet
Args:
- Callee: printf
- String: ' will not be inlined into '
- Caller: printArgsNoRet
DebugLoc: { File: 'test-suite/SingleSource/UnitTests/2002-04-17-PrintfChar.c',
Line: 6, Column: 0 }
- String: ' because its definition is unavailable'
...
```
to:
```
--- !Missed
Pass: 0
Name: 1
DebugLoc: { File: 3, Line: 7, Column: 3 }
Function: 2
Args:
- Callee: 4
- String: 5
- Caller: 2
DebugLoc: { File: 3, Line: 6, Column: 0 }
- String: 6
...
```
And the string table in the .remarks/__remarks section containing:
```
inline\0NoDefinition\0printArgsNoRet\0
test-suite/SingleSource/UnitTests/2002-04-17-PrintfChar.c\0printf\0
will not be inlined into \0 because its definition is unavailable\0
```
This is mostly supposed to be used for testing purposes, but it gives us
a 2x reduction in the remark size, and is an incremental change for the
updates to the remarks file format.
Differential Revision: https://reviews.llvm.org/D60227
llvm-svn: 359050
Add urem support to ConstantRange, so we can handle in in LVI. This
is an approximate implementation that tries to capture the most useful
conditions: If the LHS is always strictly smaller than the RHS, then
the urem is a no-op and the result is the same as the LHS range.
Otherwise the lower bound is zero and the upper bound is
min(LHSMax, RHSMax - 1).
Differential Revision: https://reviews.llvm.org/D60952
llvm-svn: 359019
Without this patch, APSInt inherits APInt::isNegative, which merely
checks the sign bit without regard to whether the type is actually
signed. isNonNegative and isStrictlyPositive call isNegative and so
are also affected.
This patch adjusts APSInt to override isNegative, isNonNegative, and
isStrictlyPositive with implementations that consider whether the type
is signed.
A large set of Clang OpenMP tests are affected. Without this patch,
these tests assume that `true` is not a valid argument for clauses
like `collapse`. Indeed, `true` fails APInt::isStrictlyPositive but
not APSInt::isStrictlyPositive. This patch adjusts those tests to
assume `true` should be accepted.
This patch also adds tests revealing various other similar fixes due
to APSInt::isNegative calls in Clang's ExprConstant.cpp and
SemaExpr.cpp: `++` and `--` overflow in `constexpr`, evaluated object
size based on `alloc_size`, `<<` and `>>` shift count validation, and
OpenMP array section validation.
Reviewed By: lebedev.ri, ABataev, hfinkel
Differential Revision: https://reviews.llvm.org/D59712
llvm-svn: 359012
Summary:
This test was added to verify that createUniqueEntity() does
not enter an infinite loop when all possible names are taken. However,
it also checked that all possible names are generated, which is flaky
(because the names are generated randomly). This change increases the
number of attempts we make to make flakes exceedingly
unlikely (3.88e-62).
Reviewers: fedor.sergeev, rsmith
Reviewed By: fedor.sergeev
Subscribers: llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D56336
llvm-svn: 358914
This reverts commit 7bf4d7c07f2fac862ef34c82ad0fef6513452445.
After thinking about this more, this isn't right, the range is not exact
in the same sense as makeExactICmpRegion(). This needs a separate
function.
llvm-svn: 358876
Following D60632 makeGuaranteedNoWrapRegion() always returns an
exact nowrap region. Rename the function accordingly. This is in
line with the naming of makeExactICmpRegion().
llvm-svn: 358875
Add support for uadd_sat and friends to ConstantRange, so we can
handle uadd.sat and friends in LVI. The implementation is forwarding
to the corresponding APInt methods with appropriate bounds.
One thing worth pointing out here is that the handling of wrapping
ranges is not maximally accurate. A simple example is that adding 0
to a wrapped range will return a full range, rather than the original
wrapped range. The tests also only check that the non-wrapping
envelope is correct and minimal.
Differential Revision: https://reviews.llvm.org/D60946
llvm-svn: 358855
Summary:
JITLink is a jit-linker that performs the same high-level task as RuntimeDyld:
it parses relocatable object files and makes their contents runnable in a target
process.
JITLink aims to improve on RuntimeDyld in several ways:
(1) A clear design intended to maximize code-sharing while minimizing coupling.
RuntimeDyld has been developed in an ad-hoc fashion for a number of years and
this had led to intermingling of code for multiple architectures (e.g. in
RuntimeDyldELF::processRelocationRef) in a way that makes the code more
difficult to read, reason about, extend. JITLink is designed to isolate
format and architecture specific code, while still sharing generic code.
(2) Support for native code models.
RuntimeDyld required the use of large code models (where calls to external
functions are made indirectly via registers) for many of platforms due to its
restrictive model for stub generation (one "stub" per symbol). JITLink allows
arbitrary mutation of the atom graph, allowing both GOT and PLT atoms to be
added naturally.
(3) Native support for asynchronous linking.
JITLink uses asynchronous calls for symbol resolution and finalization: these
callbacks are passed a continuation function that they must call to complete the
linker's work. This allows for cleaner interoperation with the new concurrent
ORC JIT APIs, while still being easily implementable in synchronous style if
asynchrony is not needed.
To maximise sharing, the design has a hierarchy of common code:
(1) Generic atom-graph data structure and algorithms (e.g. dead stripping and
| memory allocation) that are intended to be shared by all architectures.
|
+ -- (2) Shared per-format code that utilizes (1), e.g. Generic MachO to
| atom-graph parsing.
|
+ -- (3) Architecture specific code that uses (1) and (2). E.g.
JITLinkerMachO_x86_64, which adds x86-64 specific relocation
support to (2) to build and patch up the atom graph.
To support asynchronous symbol resolution and finalization, the callbacks for
these operations take continuations as arguments:
using JITLinkAsyncLookupContinuation =
std::function<void(Expected<AsyncLookupResult> LR)>;
using JITLinkAsyncLookupFunction =
std::function<void(const DenseSet<StringRef> &Symbols,
JITLinkAsyncLookupContinuation LookupContinuation)>;
using FinalizeContinuation = std::function<void(Error)>;
virtual void finalizeAsync(FinalizeContinuation OnFinalize);
In addition to its headline features, JITLink also makes other improvements:
- Dead stripping support: symbols that are not used (e.g. redundant ODR
definitions) are discarded, and take up no memory in the target process
(In contrast, RuntimeDyld supported pointer equality for weak definitions,
but the redundant definitions stayed resident in memory).
- Improved exception handling support. JITLink provides a much more extensive
eh-frame parser than RuntimeDyld, and is able to correctly fix up many
eh-frame sections that RuntimeDyld currently (silently) fails on.
- More extensive validation and error handling throughout.
This initial patch supports linking MachO/x86-64 only. Work on support for
other architectures and formats will happen in-tree.
Differential Revision: https://reviews.llvm.org/D58704
llvm-svn: 358818
Summary:
Trying to add the plumbing necessary to add tuning options to the new pass manager.
Testing with the flags for loop vectorize.
Reviewers: chandlerc
Subscribers: sanjoy, mehdi_amini, jlebar, steven_wu, dexonsmith, dang, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D59723
llvm-svn: 358763
Change two costly udiv() calls to lshr(1)*RHS + left-shift + plus
On one 64-bit umul_ov benchmark, I measured an obvious improvement: 12.8129s -> 3.6257s
Note, there may be some value to special case 64-bit (the most common
case) with __builtin_umulll_overflow().
Differential Revision: https://reviews.llvm.org/D60669
llvm-svn: 358730
Petar Jovanovic