Summary:
A tool for changing surrouding namespaces of class/function definitions while keeping
references to types in the changed namespace correctly qualified by prepending
namespace specifiers before them.
Example: test.cc
namespace na {
class X {};
namespace nb {
class Y { X x; };
} // namespace nb
} // namespace na
To move the definition of class Y from namespace "na::nb" to "x::y", run:
clang-change-namespace --old_namespace "na::nb" \
--new_namespace "x::y" --file_pattern "test.cc" test.cc --
Output:
namespace na {
class X {};
} // namespace na
namespace x {
namespace y {
class Y { na::X x; };
} // namespace y
} // namespace x
Reviewers: alexfh, omtcyfz, hokein
Subscribers: mgorny, klimek, djasper, beanz, alexshap, Eugene.Zelenko, cfe-commits
Differential Revision: https://reviews.llvm.org/D24183
llvm-svn: 281918
The InputSection variables in the Writer were named `C`. This
was because when the ELF linker was ported (from COFF)
the name `Chunks` for input sections was retained.
Luckily we switched to a more ELF-compliant jargon, but these
variables weren't reanamed accordingly during the transition.
llvm-svn: 281917
The OperandsMapper class is used heavy in RegBankSelect and each
instantiation triggered a heap allocation for the array of operands.
Instead, use a SmallVector with a big enough size such that most of the
cases do not have to use dynamically allocated memory.
This improves the compile time of the RegBankSelect pass.
llvm-svn: 281916
Machine programs need a definition of each vreg before reaching a use
(the definition may come from an IMPLICIT_DEF instruction). This class
of errors is not detected by the MachineVerifier because of efficiency
concerns. LiveRangeCalc used to report these problems, make it do that
again (followup to r279625).
Also use report_fatal_error() instead of llvm_unreachable() as the error
reporting is only present in asserts build anyway.
llvm-svn: 281914
This change adds support for the gtests that require input data
in the Inputs files. This is done through a new Xcode script
phase that runs the scripts/Xcode/prepare-gtest-run-dir.sh script.
That script simply copies the contents of all unittests/**/Inputs
dirs into ${TARGET_BUILD_DIR}/Inputs before running the test.
This change also renames the Xcode 'gtest-for-debugging' to
'gtest-build', and makes the gtest "build and run" target
depend on gtest-build. This reduces replication within the
targets. gtest .c/.cpp files now should only be added to
the gtest-build target.
llvm-svn: 281913
Summary: It does not make sense to set equal weights for all unkown branches as we have static branch prediction available.
Reviewers: dnovillo
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D24732
llvm-svn: 281912
Summary: The call target count profile is directly derived from LBR branch->target data. This is more reliable than instruction frequency profiles that could be moved across basic block boundaries. This patches uses call target count profile to annotate call instructions.
Reviewers: davidxl, dnovillo
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D24410
llvm-svn: 281911
Summary: We previously relies on InstructionCombining pass to remove invoke instructions. Now that we can inline invoke instructions correctly, we do not need these passes any more.
Reviewers: dnovillo
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D24730
llvm-svn: 281910
Summary:
This patch is adding the needed code to compiler-rt to support
dynamic shadow.
This is to support this patch:
https://reviews.llvm.org/D23354
It's adding support for using a shadow placed at a dynamic address determined
at runtime.
The dynamic shadow is required to work on windows 64-bits.
Reviewers: rnk, kcc, vitalybuka
Subscribers: kubabrecka, dberris, llvm-commits, chrisha
Differential Revision: https://reviews.llvm.org/D23363
llvm-svn: 281909
Summary:
This patch is adding the support for a shadow memory with
dynamically allocated address range.
The compiler-rt needs to export a symbol containing the shadow
memory range.
This is required to support ASAN on windows 64-bits.
Reviewers: kcc, rnk, vitalybuka
Subscribers: kubabrecka, dberris, llvm-commits, chrisha
Differential Revision: https://reviews.llvm.org/D23354
llvm-svn: 281908
The struct CallStackFrame is in lib/AST/ExprConstant.cpp
inside anonymous namespace.
This diff reorders the fields and removes excessive padding.
Test plan: make -j8 check-clang
Differential revision: https://reviews.llvm.org/D23901
llvm-svn: 281907
When porting large bodies of code from using const char*
to StringRef, it is helpful to be able to treat nullptr
as an empty string, since that it is often what it is used
to indicate in C-style code.
Differential Revision: https://reviews.llvm.org/D24697
llvm-svn: 281906
Will Dietz found and reported that lld does not compile with gcc 6.2.0,
more details https://llvm.org/bugs/show_bug.cgi?id=30438
And confirmed this change fixes the issue.
llvm-svn: 281900
Whenever an add/sub immediate needs a fixup, we set that immediate field to zero,
which is correct, but we also set the shift bits to zero, which is not true for
instructions that use lsl #12. This patch makes sure that if lsl #12 was used,
it will appear in the encoding of the instruction.
Differential Revision: https://reviews.llvm.org/D23930
llvm-svn: 281898
Summary:
In case s_branch instruction target is itself backend should emit offset -1 but instead it emit 0.
'''
label:
s_branch label // should emit [0xff,0xff,0x82,0xbf]
'''
Tom, Matt: why are we adjusting fixup values in applyFixup() method instead of processFixup()? processFixup() is calling adjustFixupValue() but does nothing with its result.
Reviewers: vpykhtin, artem.tamazov, tstellarAMD
Subscribers: arsenm, kzhuravl, wdng, nhaehnle, yaxunl
Differential Revision: https://reviews.llvm.org/D24671
llvm-svn: 281896
When phi nodes are created in the -mem2reg phase, the @llvm.dbg.declare
entries are converted to @llvm.dbg.value entries at the place where the
store instructions existed. However no entry is created to describe
the resulting value of the phi node.
The effect of this is especially noticeable in for loops which have a
constant for the intial value; the loop control variable's location
would be described as the intial constant value in the loop body once
the -mem2reg optimization phase was run.
This change adds the creation of the @llvm.dbg.value entries to describe
variables whose location is the result of a phi node created in -mem2reg.
Also when the phi node is finally lowered to a machine instruction it
is important that the lowered "load" instruction is placed before the
associated DEBUG_VALUE entry describing the value loaded.
Differential Revision: https://reviews.llvm.org/D23715
llvm-svn: 281895
The initial mapping symbol state is set from the triple, but we only checked
for the little-endian thumb triple, so could end up with an ARM mapping symbol
for big-endian thumb.
Differential Revision: https://reviews.llvm.org/D24553
llvm-svn: 281894
ldm and stm instructions always require 4-byte alignment on the pointer, but we
weren't checking this before trying to reduce code-size by replacing a
post-indexed load/store with them. Unfortunately, we were also dropping this
incormation in DAG ISel too, but that's easy enough to fix.
llvm-svn: 281893
Summary:
Diff to r281457:
- added a test case `CalculateRangesOfInsertionAroundReplacement`.
Reviewers: djasper
Subscribers: cfe-commits, klimek
Differential Revision: https://reviews.llvm.org/D24606
llvm-svn: 281891
We were updating metadata but not IR flags. Because we pick an arbitrary instruction to be the CSE candidate, it comes down to luck (50% or less chance) if this results in broken codegen or not, which is why PR30373 which is actually not the fault of the commit it was bisected down to.
Fixes PR30373.
llvm-svn: 281889
Summary:
Previously, clang-format would always insert an additional line break after the
import block if the main body started with a comment, due to loosing track of
the first non-import line.
Reviewers: djasper
Subscribers: cfe-commits, klimek
Differential Revision: https://reviews.llvm.org/D24708
llvm-svn: 281888
Fix lit search to correctly respect LIBOMP_LLVM_LIT_EXECUTABLE as full
program path.
The variable passed to find_program() is created by CMake as a cache
variable, and therefore can be directly overriden by the user. Since
this was the design of LIBOMP_LLVM_LIT_EXECUTABLE (as can be deduced
from the error messages) and there is no other use of LIT_EXECUTABLE,
remove the redundant variable and pass LIBOMP_LLVM_LIT_EXECUTABLE
directly to find_program().
Furthermore, the previous code did not work since the HINTS argument
specifies more search directories rather than expected full path.
Quoting the CMake documentation:
> 3. Search the paths specified by the HINTS option. These should be
> paths computed by system introspection, such as a hint provided by
> the location of another item already found. Hard-coded guesses should
> be specified with the PATHS option.
Differential Revision: https://reviews.llvm.org/D24710
llvm-svn: 281887
SUBREG_TO_REG is supposed to indicate that the super register has been zeroed, but we can't prove that if we don't know where it came from.
llvm-svn: 281885
Treat lines in projectMap.csv that start with '#' as comments. This enables a
workflow where projects can be temporarily disabled with a comment describing
when they should be turned back on.
Differential Revision: https://reviews.llvm.org/D24709
llvm-svn: 281880
This is a port of XRay to ARM 32-bit, without Thumb support yet. The XRay instrumentation support is moving up to AsmPrinter.
This is one of 3 commits to different repositories of XRay ARM port. The other 2 are:
https://reviews.llvm.org/D23932 (Clang test)
https://reviews.llvm.org/D23933 (compiler-rt)
Differential Revision: https://reviews.llvm.org/D23931
llvm-svn: 281878
These are distinct statistics which are useful to look at separately.
Example: say you have a template function "foo" with 5 instantiations
and only 3 of them are covered. Then this contributes (1/1) to the total
function coverage and (3/5) to the total instantiation coverage. I.e,
the old "Function Coverage" column has been renamed to "Instantiation
Coverage", and the new "Function Coverage" aggregates information from
the various instantiations of a function.
One benefit of making this switch is that the Line and Region coverage
columns will start making sense. Let's continue the example and assume
that the 5 instantiations of "foo" cover {2, 4, 6, 8, 10} out of 10
lines respectively. The new line coverage for "foo" is (10/10), not
(30/50). The old scenario got confusing because we'd report that there
were more lines in a file than what was actually possible.
llvm-svn: 281875
This drops some redundant calls to get{UniqueSourceFiles,
CoveredFunctions}. We can figure out the right column widths without
re-doing this expensive work.
This isn't NFC, but I don't want to check in another binary *.covmapping
file with long filenames in it. I tested this locally on a project with
some long filenames (FileCheck).
llvm-svn: 281873
In practice, it's way too noisy.
It's also a maintenance burden, since we apparently can't add tests for
it without breaking some Windows setups (see: D22692).
llvm-svn: 281871
Summary: Previously we reline on inst-combine to remove inlinable invoke instructions. This causes trouble because a few extra optimizations are schedule early that could introduce too much CFG change (e.g. simplifycfg removes too much control flow). This patch handles invoke instruction in-place during sample profile annotation, so that we do not rely on instcombine to remove those invoke instructions.
Reviewers: davidxl, dnovillo
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D24409
llvm-svn: 281870
Eric Liu