Summary:
This patch fixes an issue where the PPC MI peephole optimization pass incorrectly remove a vector swap.
Specifically, the pass can combine a splat/swap to a splat/copy. It uses `TargetRegisterInfo::lookThruCopyLike` to determine that the operands to the splat are the same. However, the current logic only compares the operands based on register numbers. In the case where the splat operands are ultimately feed from the same physical register, the pass can incorrectly remove a swap if the feed register for one of the operands has been clobbered.
This patch adds a check to ensure that the registers feeding are both virtual registers or the operands to the splat or swap are both the same register.
Here is an example in pseudo-MIR of what happens in the test cased added in this patch:
Before PPC MI peephole optimization:
```
%arg = XVADDDP %0, %1
$f1 = COPY %arg.sub_64
call double rint(double)
%res.first = COPY $f1
%vec.res.first = SUBREG_TO_REG 1, %res.first, %subreg.sub_64
%arg.swapped = XXPERMDI %arg, %arg, 2
$f1 = COPY %arg.swapped.sub_64
call double rint(double)
%res.second = COPY $f1
%vec.res.second = SUBREG_TO_REG 1, %res.second, %subreg.sub_64
%vec.res.splat = XXPERMDI %vec.res.first, %vec.res.second, 0
%vec.res = XXPERMDI %vec.res.splat, %vec.res.splat, 2
; %vec.res == [ %vec.res.second[0], %vec.res.first[0] ]
```
After optimization:
```
; ...
%vec.res.splat = XXPERMDI %vec.res.first, %vec.res.second, 0
; lookThruCopyLike(%vec.res.first) == lookThruCopyLike(%vec.res.second) == $f1
; so the pass replaces the swap with a copy:
%vec.res = COPY %vec.res.splat
; %vec.res == [ %vec.res.first[0], %vec.res.second[0] ]
```
As best as I can tell, this has occurred since r288152, which added support for lowering certain vector operations to direct moves in the form of a splat.
Committed for vddvss (Colin Samples). Thanks Colin for the patch!
Differential Revision: https://reviews.llvm.org/D69497
Current tail duplication integrated in bb layout is designed to increase the fallthrough from a BB's predecessor to its successor, but we have observed cases that duplication doesn't increase fallthrough, or it brings too much size overhead.
To overcome these two issues in function canTailDuplicateUnplacedPreds I add two checks:
make sure there is at least one duplication in current work set.
the number of duplication should not exceed the number of successors.
The modification in hasBetterLayoutPredecessor fixes a bug that potential predecessor must be at the bottom of a chain.
Differential Revision: https://reviews.llvm.org/D64376
SUMMARY:
in the patch https://reviews.llvm.org/D66969 . we need a test case to verify the out text section of the xcoffobject file is correct or not.
but we do not have llvm disassembly tools to dump the xcoffobjectfile . since we commit the patch https://reviews.llvm.org/D70255, we have tools for it. we create this test case for it.
Reviewers: daltenty,hubert.reinterpretcast,
Differential Revision: https://reviews.llvm.org/D70719
Summary: Previously we only handled the case where the csect hadn't been set up yet, so we'd hit an assert later on.
Reviewers: jasonliu, DiggerLin, stevewan
Reviewed By: jasonliu
Subscribers: hubert.reinterpretcast, wuzish, nemanjai, hiraditya, kbarton, jsji, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71032
Fix assertion error
```
bool llvm::MachineOperand::isRenamable() const: Assertion `Register::isPhysicalRegister(getReg()) && "isRenamable should only be checked on physical registers"' failed.
```
by checking if the register is 0 before invoking `isRenamable`.
Summary:
This patch mainly do such transformation
```
$R0 = OP ...
... // No read/clobber of $R0 and $R1
$R1 = COPY $R0 // $R0 is killed
```
Replace $R0 with $R1 and remove the COPY, we have
```
$R1 = OP ...
```
This transformation can also expose more opportunities for existing
copy elimination in MCP.
Differential Revision: https://reviews.llvm.org/D67794
Summary:
Implement emitTCEntry for PPCTargetXCOFFStreamer.
Add TC csects to TOCCsects for object file writing.
Note:
1. I did not include any raw data testing for this object file generation
because TC entries raw data will all be 0 without relocation implemented.
I will add raw data testing as part of relocation testing later.
2. I removed "Symbol->setFragment(F);" for common symbols because we
don't need it, and if we have it then we would hit assertions below:
Assertion `(SymbolContents == SymContentsUnset ||
SymbolContents == SymContentsOffset) &&
"Cannot get offset for a common/variable symbol"' failed.
3.Fixed incorrect TOC-base alignment.
Differential Revision: https://reviews.llvm.org/D70798
This is an alternative to D64662 that shares more code between
strict and non-strict nodes. It's modeled after the implementation
that I did for softening.
Differential Revision: https://reviews.llvm.org/D70867
Summary: b19ec1eb3d has been reverted because of the test failures
with PowerPC targets. This patch addresses the issues from the previous
commit.
Test Plan: ninja check-all. Confirmed that CodeGen/PowerPC/pr36292.ll
and CodeGen/PowerPC/sms-cpy-1.ll pass
Subscribers: llvm-commits
When converting reg+reg shifts to reg+imm rotates, we neglect to consider the
CodeGenOnly versions of the 32-bit shift mnemonics. This means we produce a
rotate with missing operands which causes a crash.
Committing this fix without review since it is non-controversial that the list
of mnemonics to consider should include the 64-bit aliases for the exact
mnemonics.
Fixes PR44183.
This patch adds LowerFormalArguments_AIX, support is added for lowering
int, float, and double formal arguments into general purpose and
floating point registers only.
The aix calling convention testcase have been redone to test for caller
and callee functionality in the same lit test.
Patch by Zarko Todorovski!
Differential Revision: https://reviews.llvm.org/D69578
Summary:
Emit the correct .toc psuedo op when we change to the TOC and emit
TC entries. Make sure TOC psuedos get the right symbols via overriding
getMCSymbolForTOCPseudoMO on AIX. Add a test for TOC assembly writing
and update tests to include TOC entries.
Also make sure external globals have a csect set and handle external function descriptor (originally authored by Jason Liu) so we can emit TOC entries for them.
Reviewers: DiggerLin, sfertile, Xiangling_L, jasonliu, hubert.reinterpretcast
Reviewed By: jasonliu
Subscribers: arphaman, wuzish, nemanjai, hiraditya, kbarton, jsji, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70461
This is a continuation of D70262
The previous patch as listed above added the future CPU in clang. This patch
adds the future CPU in the PowerPC backend. At this point the patch simply
assumes that a future CPU will have the same characteristics as pwr9. Those
characteristics may change with later patches.
Differential Revision: https://reviews.llvm.org/D70333
If an inline asm statement clobbers a VSX register that overlaps with a
callee-saved Altivec register or FPR, we will not record the clobber and will
therefore violate the ABI. This is clearly a bug so this patch fixes it.
Differential revision: https://reviews.llvm.org/D68576
Summary:
This patch sets up the infrastructure for
1. Associate MCSymbolXCOFF with an MCSectionXCOFF when it could not
get implicitly associated.
2. Generate undefined symbols. The patch itself generates undefined symbol
for external function call only. Generate undefined symbol for external
global variable and external function descriptors will be handled in
separate patch(s) after this is land.
Differential Revision: https://reviews.llvm.org/D70443
This patch aims to spill CR[0-7]LT bits on POWER9 using the setb instruction.
The sequence on P9 to spill these bits will be:
setb %reg, %CRREG
stw %reg, $FI
Instead of the typical sequence:
mfocrf %reg, %CRREG
rlwinm %reg1, %reg, $SH, 0, 0
stw %reg1, $FI
Differential Revision: https://reviews.llvm.org/D68443
Summary:
This patch is a follow up on read-only assembly patch D70182.
It intends to enable object file generation for the read-only data section on AIX.
Reviewers: DiggerLin, daltenty
Differential Revision: https://reviews.llvm.org/D70455
Power9 has instructions to implement the semantics of SIGN_EXTEND_INREG for vector type.
Mark it as legal and add the match pattern.
Differential Revision: https://reviews.llvm.org/D69601
This patch lowering jump table, constant pool and block address in assembly.
1. On AIX, jump table index is always relative;
2. Put CPI and JTI into ReadOnlySection until we support unique data sections;
3. Create the temp symbol for block address symbol;
4. Update MIR testcases and add related assembly part;
Differential Revision: https://reviews.llvm.org/D70243
This patch implements writing function descriptors and TOC base into
data section, and also add function descriptors(both csect and label)
and TOC base symbols to the symbol table.
SUMMARY:
Adding a test case for read-only data assembly writing for aix
Reviewers: daltenty,Xiangling_Liao
Subscribers: rupprecht, seiyai,hiraditya
Differential Revision: https://reviews.llvm.org/D70182
This patch aims to improve the code generation for float vector gather on POWER9.
Patterns have been implemented to utilize instructions that deliver improved
performance.
Patch by: Kamau Bridgeman
Differential Revision: https://reviews.llvm.org/D62908
Test case to verify that the expected code is generated for a
vector float gather based on the patterns in tablegen for big
and little endian cases.
Patch by: Kamau Bridgeman
Differential Revision: https://reviews.llvm.org/D69443
Now, PPCPreIncPrep pass changes a loop to update form and update all load/store
with same base accordingly. We can do more for load/store with same base, for
example, convert load/store with same base to ds/dq form.
Reviewed by: jsji
Differential Revision: https://reviews.llvm.org/D67088
Summary:
This is found during review of https://reviews.llvm.org/D67088.
CHECK-DAG is non-overlapping after https://reviews.llvm.org/D47106.
-allow-deprecated-dag-overlap was introduced to temporary accept old
behavior.
But it actually hide some broken tests, eg: `test/CodeGen/PowerPC/swaps-le-1.ll`
The codegen has changed, but the CHECK-DAG still PASS due to allowing `overlap`.
This patch remove the deprecated options, and fix the broken tests.
Reviewers: #powerpc, hfinkel, nemanjai, steven.zhang, shchenz
Reviewed By: shchenz
Subscribers: shchenz, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D69733
The author of the patch forgot to add -verify-machineinstrs to the RUN
lines which would have made the issue appear on all bots. Added that
as well as a fix for the undefined register issue (after the hoisting).
For XCOFF, globals mapped into the .bss section are linked as COMMON
definitions. This behaviour is incorrect for zero initialized data, so
emit those to the .data section instead.
Differential Revision: https://reviews.llvm.org/D69528
In current Hoist() function of machine licm pass, it will not check the source and destination basic block frequencies that a instruction is hoisted from/to.
There is a chance that instruction is hoisted from a cold to a hot basic block.
In this patch, we add options to disable machine instruction hoisting if destination block is hotter.
Differential Revision: https://reviews.llvm.org/D63676
For example:
long long test(long long a, long long b) {
if (a << b > 0)
return b;
if (a << b < 0)
return a;
return a*b;
}
Produces:
sld. 5, 3, 4
ble 0, .LBB0_2
mr 3, 4
blr
.LBB0_2: # %if.end
cmpldi 5, 0
li 5, 1
isel 4, 4, 5, 2
mulld 3, 4, 3
blr
But the compare (cmpldi 5, 0) is redundant and can be removed (CR0 already
contains the result of that comparison).
The root cause of this is that LLVM converts signed comparisons into equality
comparison based on dominance. Equality comparisons are unsigned by default, so
we get either a record-form or cmp (without the l for logical) feeding a cmpl.
That is the situation we want to avoid here.
Differential Revision: https://reviews.llvm.org/D60506
We lower known CR bit spills (CRSET/CRUNSET) to load and spill the known value
but forgot to remove the redundant spills.
e.g., This sequence was used to spill a CRUNSET:
crclr 4*cr5+lt
mfocrf r3,4
rlwinm r3,r3,20,0,0
stw r3,132(r1)
Custom lowering of known CR bit spills lower it to:
crxor 4*cr5+lt, 4*cr5+lt, 4*cr5+lt
li r3,0
stw r3,132(r1)
crxor is redundant if there is no use of 4*cr5+lt so we should remove it
Differential revision: https://reviews.llvm.org/D67722
Summary:
We are using symbols to represent label and csect interchangeably before, and that could be a problem.
There are cases we would need to add storage mapping class to the symbol if that symbol is actually the name of a csect, but it's hard for us to figure out whether that symbol is a label or csect.
This patch intend to do the following:
1. Construct a QualName (A name include the storage mapping class)
MCSymbolXCOFF for every MCSectionXCOFF.
2. Keep a pointer to that QualName inside of MCSectionXCOFF.
3. Use that QualName whenever we need a symbol refers to that
MCSectionXCOFF.
4. Adapt the snowball effect from the above changes in
XCOFFObjectWriter.cpp.
Reviewers: xingxue, DiggerLin, sfertile, daltenty, hubert.reinterpretcast
Reviewed By: DiggerLin, daltenty
Subscribers: wuzish, nemanjai, mgorny, hiraditya, kbarton, jsji, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D69633
This option allows the user to specify the use of absolute jumptables instead
of relative which is the default on most PPC subtargets.
Patch by Kamauu Bridgeman
Differential revision: https://reviews.llvm.org/D69108
The 'RM' flag model the "Rounding Mode" and it has nothing to do with the load/store instructions.
Differential Revision: https://reviews.llvm.org/D69551
This adds AA to Post-RA Machine Scheduling, allowing the pass more
freedom when handling memory operations.
My understanding is that this was just never done, not that it is
inherently incorrect to do so. The older PostRA List scheduler already
makes use of AA, it's just that the MI PostRA Scheduler was never taught
to use it.
Differential Revision: https://reviews.llvm.org/D69814
This patch (second of two patches) lowers the generic PowerPC vector
entries to PowerPC subtarget-specific entries.
For instance, the PowerPC generic entry 'cbrtd2_massv' is lowered to
'cbrtd2_P9' or Power9 subtarget.
The first patch enables the vectorizer to recognize the IBM MASS vector
library routines. This patch specifically adds support for recognizing
the '-vector-library=MASSV' option, and defines mappings from IEEE
standard scalar math functions to generic PowerPC MASS vector
counterparts.
For instance, the generic PowerPC MASS vector entry for double-precision
'cbrt' function is '__cbrtd2_massv'
The overall support for MASS vector library is presented as such in two
patches for ease of review.
Patch by pjeeva01 (Jeeva P.)
Differential Revision: https://reviews.llvm.org/D59883
Summary:
Make sure RAGreedy informs LiveDebugVariables about new VRegs
that is introduced at spill by InlineSpiller.
Consider this example
LDV: !"var" [48r;128r):0 Loc0=%2
48B %2 = ...
...
128B %7 = ADD %2, ...
If %2 is spilled the InlineSpiller will insert spill/reload
instructions and introduces some new vregs. So we get
48B %4 = ...
56B spill %4
...
120B reload %5
128B %3 = ADD %5, ...
In the past we did not inform LDV about this, and when reintroducing
DBG_VALUE instruction LDV still got information that "var" had the
location of the spilled register %2 for the interval [48r;128r).
The result was bad, since we mapped "var" to the spill slot even
before the spill happened:
%4 = ...
DBG_VALUE %spill.0, !"var"
spill %4 to %spill.0
...
reload %5
%3 = ADD %5, ...
This patch will inform LDV about the interval split introduced
due to spilling. So the location map in LDV will become
!"var" [48r;56r):1 [56r;120r):0 [120r;128r):2 Loc0=%2 Loc1=%4 Loc2=%5
And when inserting DBG_VALUE instructions we get
%4 = ...
DBG_VALUE %4, !"var"
spill %4 to %spill.0
DBG_VALUE %spill.0, !"var"
...
reload %5
DBG_VALUE %5, !"var"
%3 = ADD %5, ...
Fixes: https://bugs.llvm.org/show_bug.cgi?id=38899
Reviewers: jmorse, vsk, aprantl
Reviewed By: jmorse
Subscribers: dstenb, wuzish, MatzeB, qcolombet, nemanjai, hiraditya, jsji, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D69584
Adds support for generating the XCOFF data section in object files for global variables with initialization.
Merged aix-xcoff-common.ll into aix-xcoff-data.ll.
Changed variable name charr to chrarray in the test case to test if readobj works with 8-character names.
Authored by: xingxue
Reviewers: hubert.reinterptrtcast, sfertile, jasonliu, daltenty, Xiangling_L.
Reviewed by: hubert.reinterpretcast, sfertile, daltenty.
Subscribers: DiggerLin, Wuzish, nemanjai, hiraditya, MaskRay, jsji, shchenz, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D67125
If the instruction have match pattern, llvm-tblgen will infer the sideeffect bit from the match pattern and it works well.
If not, the tblgen will set it as true that hurt the scheduling.
PowerPC has some instructions that didn't specify the match pattern(i.e. LXSD etc), which is manually selected post-ra according
to the register pressure. We need to clear the sideeffect flag for these instructions.
Differential Revision: https://reviews.llvm.org/D69232
Teach combineVectorSizedSetCCEquality() to handle arbitrary memcmp
expansions but do not change any default policy for now.
This also fixes a bug in the memcmp expansion itself when large
displacements are needed.
https://reviews.llvm.org/D69507
VSX provides floating point minimum and maximum instructions that conform
to IEEE semantics. This legalizes the respective nodes and emits VSX code
for them. Furthermore, on Power9 cores we have xsmaxcdp and xsmincdp
instructions that conform to language semantics for the conditional operator
even in the presence of NaNs.
Differential revision: https://reviews.llvm.org/D62993
These two intrinsics are lowered to calls so should prevent the formation of
CTR loops. In a subsequent patch, we will handle all currently known intrinsics
and prevent the formation of HW loops if any unknown intrinsics are encountered.
Differential revision: https://reviews.llvm.org/D68841
This patch reworks the AIX call lowering to use CCState. Some defensive errors
are added in this patch to protect from emitting bad code for calling convention
logic that has not been implemented by design. The use of CCState follows the
precedent of other targets and enables the reuse of calling convention logic in
LowerFormalArguments, which will be rewritten to also use CCState in a late
patch.
Patch by Chris Bowler.
Differential Revision: https://reviews.llvm.org/D69101
This enhances D69127 (rGe6c145e0548e3b3de6eab27e44e1504387cf6b53)
to handle the looser "any_extend" cast in addition to zext.
This is a prerequisite step for canonicalizing in the other direction
(narrow the popcount) in IR - PR43688:
https://bugs.llvm.org/show_bug.cgi?id=43688
zext (ctpop X) --> ctpop (zext X)
This is a prerequisite step for canonicalizing in the other direction (narrow the popcount) in IR - PR43688:
https://bugs.llvm.org/show_bug.cgi?id=43688
I'm not sure if any other targets are affected, but I found a missing fold for PPC, so added tests based on that.
The reason we widen all the way to 64-bit in these tests is because the initial DAG looks something like this:
t5: i8 = ctpop t4
t6: i32 = zero_extend t5 <-- created based on IR, but unused node?
t7: i64 = zero_extend t5
Differential Revision: https://reviews.llvm.org/D69127
This re-commits r375152 which was pulled in r375233 because it broke
the EXPENSIVE_CHECKS bot on Windows.
The reason for the failure was a bug in the pass that the commit turned
on by default. This patch fixes that bug and turns the pass back on.
This patch has been verified on the buildbot that originally failed
thanks to Simon Pilgrim.
Differential revision: https://reviews.llvm.org/D52431
llvm-svn: 375497
Quite a while ago, we implemented a pass that will reduce the number of
CR-logical operations we emit. It does so by converting a CR-logical operation
into a branch. We have kept this off by default because it seemed to cause a
significant regression with one benchmark.
However, that regression turned out to be due to a completely unrelated
reason - AADB introducing a self-copy that is a priority-setting nop and it was
just exacerbated by this pass.
Now that we understand the reason for the only degradation, we can turn this
pass on by default. We have long since fixed the cause for the degradation.
Differential revision: https://reviews.llvm.org/D52431
llvm-svn: 375152
This patch provides support for peudo ops including ADDIStocHA8, ADDIStocHA, LWZtocL,
LDtoc, LDtocL for AIX, lowering them from MIR to assembly.
Differential Revision: https://reviews.llvm.org/D68341
llvm-svn: 375113
This is remaining part of rG41ca91f2995b: [AIX][XCOFF] Output XCOFF
object text section header and symbol entry for rogram code.
SUMMARY:
Original form of this patch is provided by Stefan Pintillie.
1. The patch try to output program code section header , symbol entry for
program code (PR) and Instruction into the raw text section.
2. The patch include how to alignment and layout the CSection in the text
section.
3. The patch also reorganize the code , put some codes into a function.
(XCOFFObjectWriter::writeSymbolTableEntryForControlSection)
Additional: We can not add raw data of text section test in the patch, If want
to output raw text section data,it need a function description patch first.
Reviewers: hubert.reinterpretcast, sfertile, jasonliu, xingxue.
Subscribers: wuzish, nemanjai, hiraditya, MaskRay, jsjji.
Differential Revision: https://reviews.llvm.org/D66969
llvm-svn: 374923
SUMMARY
Original form of this patch is provided by Stefan Pintillie.
The patch try to output program code section header , symbol entry for program code (PR) and Instruction into the raw text section.
The patch include how to alignment and layout the CSection in the text section.
The patch also reorganize the code , put some codes into a function(XCOFFObjectWriter::writeSymbolTableEntryForControlSection)
Additional: We can not add raw data of text section test in the patch, If want to output raw text section data,it need a function description patch first.
Reviewers: hubert.reinterpretcast, sfertile, jasonliu, xingxue.
Subscribers: wuzish, nemanjai, hiraditya, MaskRay, jsjji.
Differential Revision: https://reviews.llvm.org/D66969
llvm-svn: 374914
This patch kills off a significant user of the "IsIndirect" field of
DBG_VALUE machine insts. Brought up in in PR41675, IsIndirect is
techncally redundant as it can be expressed by the DIExpression of a
DBG_VALUE inst, and it isn't helpful to have two ways of expressing
things.
Rather than setting IsIndirect, have DBG_VALUE creators add an extra deref
to the insts DIExpression. There should now be no appearences of
IsIndirect=True from isel down to LiveDebugVariables / VirtRegRewriter,
which is ensured by an assertion in LDVImpl::handleDebugValue. This means
we also get to delete the IsIndirect handling in LiveDebugVariables. Tests
can be upgraded by for example swapping the following IsIndirect=True
DBG_VALUE:
DBG_VALUE $somereg, 0, !123, !DIExpression(DW_OP_foo)
With one where the indirection is in the DIExpression, by _appending_
a deref:
DBG_VALUE $somereg, $noreg, !123, !DIExpression(DW_OP_foo, DW_OP_deref)
Which both mean the same thing.
Most of the test changes in this patch are updates of that form; also some
changes in how the textual assembly printer handles these insts.
Differential Revision: https://reviews.llvm.org/D68945
llvm-svn: 374877
Summary:
The AIX system assembler does not understand .zero, so we should prefer
emitting .space.
Subscribers: nemanjai, hiraditya, kbarton, MaskRay, jsji, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D68815
llvm-svn: 374564
The assertion is everzealous and fail tests like:
renamable $x3 = LI8 0
STD renamable $x3, 16, $x1
renamable $x3 = LI8 0
Remove the assertion since killed flag of $x3 is not mandentory.
Differential Revision: https://reviews.llvm.org/D68344
llvm-svn: 374515
Added some tests testing urem and srem operations with a constant divisor.
Patch by TG908 (Tim Gymnich)
Differential Revision: https://reviews.llvm.org/D68421
llvm-svn: 373830
This reverts r371177 (git commit f879c68755)
It caused PR43566 by removing empty, address-taken MachineBasicBlocks.
Such blocks may have references from blockaddress or other operands, and
need more consideration to be removed.
See the PR for a test case to use when relanding.
llvm-svn: 373805
A set of function attributes is required in any function that uses constrained
floating point intrinsics. None of our tests use these attributes.
This patch fixes this.
These tests have been tested against the IR verifier changes in D68233.
Reviewed by: andrew.w.kaylor, cameron.mcinally, uweigand
Approved by: andrew.w.kaylor
Differential Revision: https://reviews.llvm.org/D67925
llvm-svn: 373761
Summary:
This is follow up patch of https://reviews.llvm.org/D67595.
Adjust naming and the Commutable operands for additional patterns
to make it easier to read.
The testcase update also show that we can save some unecessary fmr as
well.
Reviewers: #powerpc, steven.zhang, hfinkel, nemanjai
Reviewed By: #powerpc, nemanjai
Subscribers: wuzish, hiraditya, kbarton, MaskRay, shchenz, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D68112
llvm-svn: 373652
Store rlwinm Rx, Ry, 32, 0, 31 as rlwinm Rx, Ry, 0, 0, 31 and store
rldicl Rx, Ry, 64, 0 as rldicl Rx, Ry, 0, 0. Otherwise SH field is overflow and
fails assertion in assembly printing stage.
Differential Revision: https://reviews.llvm.org/D66991
llvm-svn: 373519
The fma mutate test will not exercise what it was intended to test
once we simplify those ops immediately, but the test will still
pass with the existing CHECKs, so I'm leaving it in case that
still has minimal value.
llvm-svn: 373149
This patch emits the function descriptor csect for functions with definitions
under both 32-bit/64-bit mode on AIX.
Differential Revision: https://reviews.llvm.org/D66724
llvm-svn: 373009
Summary:
This was found during review of https://reviews.llvm.org/D66050.
In the simple test of fdiv, we miss to fold
```
fneg 2, 2
xsmaddasp 3, 2, 0
```
to
```
xsnmsubasp 3, 2, 0
```
We have the patterns for Double Precision and vectors, just missing
Single Precision, the patch add that.
Reviewers: #powerpc, hfinkel, nemanjai, steven.zhang
Reviewed By: #powerpc, steven.zhang
Subscribers: wuzish, hiraditya, kbarton, MaskRay, shchenz, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D67595
llvm-svn: 372985
We currently produce a load, followed by (possibly a move for integers and) a
splat as separate instructions. VSX has always had a splatting load for
doublewords, but as of Power9, we have it for words as well. This patch just
exploits these instructions.
Differential revision: https://reviews.llvm.org/D63624
llvm-svn: 372139
This is a follow up patch from https://reviews.llvm.org/D57857 to handle
extract_subvector v4f32. For cases where we fpext of v2f32 to v2f64 from
extract_subvector we currently generate on P9 the following:
lxv 0, 0(3)
xxsldwi 1, 0, 0, 1
xscvspdpn 2, 0
xxsldwi 3, 0, 0, 3
xxswapd 0, 0
xscvspdpn 1, 1
xscvspdpn 3, 3
xscvspdpn 0, 0
xxmrghd 0, 0, 3
xxmrghd 1, 2, 1
stxv 0, 0(4)
stxv 1, 0(5)
This patch custom lower it to the following sequence:
lxv 0, 0(3) # load the v4f32 <w0, w1, w2, w3>
xxmrghw 2, 0, 0 # Produce the following vector <w0, w0, w1, w1>
xxmrglw 3, 0, 0 # Produce the following vector <w2, w2, w3, w3>
xvcvspdp 2, 2 # FP-extend to <d0, d1>
xvcvspdp 3, 3 # FP-extend to <d2, d3>
stxv 2, 0(5) # Store <d0, d1> (%vecinit11)
stxv 3, 0(4) # Store <d2, d3> (%vecinit4)
Differential Revision: https://reviews.llvm.org/D61961
llvm-svn: 372029
All tests with -run-pass !=none should not in MIR/, See MIR/README.
```
Tests for codegen passes should NOT be here but in
test/CodeGen/sometarget. As
a rule of thumb this directory should only contain tests using
'llc -run-pass none'.
```
llvm-svn: 371857
Summary:
Since the SPE4RC register class contains an identical set of registers
and an identical spill size to the GPRC class its slightly confusing
the tablegen emitter. It's preventing the GPRC_and_GPRC_NOR0 synthesized
register class from inheriting VTs and AltOrders from GPRC or GPRC_NOR0.
This is because SPE4C is found first in the super register class list
when inheriting these properties and it doesn't set the VTs or
AltOrders the same way as GPRC or GPRC_NOR0.
This patch replaces all uses of GPE4RC with GPRC and allows GPRC and
GPRC_NOR0 to contain f32.
The test changes here are because the AltOrders are being inherited
to GPRC_NOR0 now.
Found while trying to determine if getCommonSubClass needs to take
a VT argument. It was originally added to support fp128 on x86-64,
I've changed some things about that so that it might be needed
anymore. But a PowerPC test crashed without it and I think its
due to this subclass issue.
Reviewers: jhibbits, nemanjai, kbarton, hfinkel
Subscribers: wuzish, nemanjai, mehdi_amini, hiraditya, kbarton, MaskRay, dexonsmith, jsji, shchenz, steven.zhang, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D67513
llvm-svn: 371779
Current implementation of estimating divisions loses precision since it
estimates reciprocal first and does multiplication. This patch is to re-order
arithmetic operations in the last iteration in DAGCombiner to improve the
accuracy.
Reviewed By: Sanjay Patel, Jinsong Ji
Differential Revision: https://reviews.llvm.org/D66050
llvm-svn: 371713
Summary:
This catches malformed mir files which specify alignment as log2 instead of pow2.
See https://reviews.llvm.org/D65945 for reference,
This is patch is part of a series to introduce an Alignment type.
See this thread for context: http://lists.llvm.org/pipermail/llvm-dev/2019-July/133851.html
See this patch for the introduction of the type: https://reviews.llvm.org/D64790
Reviewers: courbet
Subscribers: MatzeB, qcolombet, dschuff, arsenm, sdardis, nemanjai, jvesely, nhaehnle, hiraditya, kbarton, asb, rbar, johnrusso, simoncook, apazos, sabuasal, niosHD, jrtc27, MaskRay, zzheng, edward-jones, atanasyan, rogfer01, MartinMosbeck, brucehoult, the_o, PkmX, jocewei, jsji, Petar.Avramovic, asbirlea, s.egerton, pzheng, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D67433
llvm-svn: 371608
Summary:
After tailduplication, we have redundant copies. We can remove these
copies in machine-cp if it's safe to, i.e.
```
$reg0 = OP ...
... <<< No read or clobber of $reg0 and $reg1
$reg1 = COPY $reg0 <<< $reg0 is killed
...
<RET>
```
will be transformed to
```
$reg1 = OP ...
...
<RET>
```
Differential Revision: https://reviews.llvm.org/D65267
llvm-svn: 371359
Summary:
Normally TargetLowering::expandFixedPointMul would handle
SMULFIXSAT with scale zero by using an SMULO to compute the
product and determine if saturation is needed (if overflow
happened). But if SMULO isn't custom/legal it falls through
and uses the same technique, using MULHS/SMUL_LOHI, as used
for non-zero scales.
Problem was that when checking for overflow (handling saturation)
when not using MULO we did not expect to find a zero scale. So
we ended up in an assertion when doing
APInt::getLowBitsSet(VTSize, Scale - 1)
This patch fixes the problem by adding a new special case for
how saturation is computed when scale is zero.
Reviewers: RKSimon, bevinh, leonardchan, spatel
Reviewed By: RKSimon
Subscribers: wuzish, nemanjai, hiraditya, MaskRay, jsji, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D67071
llvm-svn: 371309
Summary:
Add an intrinsic that takes 2 unsigned integers with
the scale of them provided as the third argument and
performs fixed point multiplication on them. The
result is saturated and clamped between the largest and
smallest representable values of the first 2 operands.
This is a part of implementing fixed point arithmetic
in clang where some of the more complex operations
will be implemented as intrinsics.
Patch by: leonardchan, bjope
Reviewers: RKSimon, craig.topper, bevinh, leonardchan, lebedev.ri, spatel
Reviewed By: leonardchan
Subscribers: ychen, wuzish, nemanjai, MaskRay, jsji, jdoerfert, Ka-Ka, hiraditya, rjmccall, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D57836
llvm-svn: 371308
Test verified that we could compile an empty module and produce an XCOFF
object file. Newer tests superssed this coverage, its safe to remove.
llvm-svn: 371247
Extend the common/local-common testing for object files to also verify the
symbol table now that the needed functionality has landed in llvm-readobj.
Differential Revision: https://reviews.llvm.org/D66944
llvm-svn: 371237
Summary:
Fix a bug of not update the jump table and recommit it again.
In `block-placement` pass, it will create some patterns for unconditional we can do the simple early retrun.
But the `early-ret` pass is before `block-placement`, we don't want to run it again.
This patch is to do the simple early return to optimize the blocks at the last of `block-placement`.
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D63972
llvm-svn: 371177
Summary:
This patch renames functions that takes or returns alignment as log2, this patch will help with the transition to llvm::Align.
The renaming makes it explicit that we deal with log(alignment) instead of a power of two alignment.
A few renames uncovered dubious assignments:
- `MirParser`/`MirPrinter` was expecting powers of two but `MachineFunction` and `MachineBasicBlock` were using deal with log2(align). This patch fixes it and updates the documentation.
- `MachineBlockPlacement` exposes two flags (`align-all-blocks` and `align-all-nofallthru-blocks`) supposedly interpreted as power of two alignments, internally these values are interpreted as log2(align). This patch updates the documentation,
- `MachineFunctionexposes` exposes `align-all-functions` also interpreted as power of two alignment, internally this value is interpreted as log2(align). This patch updates the documentation,
Reviewers: lattner, thegameg, courbet
Subscribers: dschuff, arsenm, jyknight, dylanmckay, sdardis, nemanjai, jvesely, nhaehnle, javed.absar, hiraditya, kbarton, fedor.sergeev, asb, rbar, johnrusso, simoncook, apazos, sabuasal, niosHD, jrtc27, MaskRay, zzheng, edward-jones, atanasyan, rogfer01, MartinMosbeck, brucehoult, the_o, dexonsmith, PkmX, jocewei, jsji, Jim, s.egerton, llvm-commits, courbet
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D65945
llvm-svn: 371045
Summary:
This is brought up in
https://reviews.llvm.org/D64662?id=209923#inline-599490
CFI information are non-relevant to quite some testcases,
we should get rid of checking them when its unecessary.
This patch avoid generating cfi info in testcases that are not
testing prolog/epilog or exception handling.
Reviewers: kbarton, hfinkel, nemanjai, #powerpc
Reviewed By: hfinkel
Subscribers: MaskRay, shchenz, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D67016
llvm-svn: 370505
Unlike ppc64, which has ADDISgotTprelHA+LDgotTprelL pairs,
ppc32 just uses LDgotTprelL32, so it does not make lots of sense to use
_LO without a paired _HA.
Emit R_PPC_GOT_TPREL16 instead R_PPC_GOT_TPREL16_LO to match GCC, and
get better linker relocation check. Note, R_PPC_GOT_TPREL16_{HA,LO}
don't have good linker support:
(a) lld does not support R_PPC_GOT_TPREL16_{HA,LO}.
(b) Top of tree ld.bfd does not support R_PPC_GOT_REL16_HA Initial-Exec -> Local-Exec relaxation:
// a.o
addis 3, 3, tsd_tls@got@tprel@ha
lwz 3, tsd_tls@got@tprel@l(3)
add 3, 3, tsd_tls@tls
// b.o
.section .tdata,"awT"; .globl tsd_tls; tsd_tls:
// ld/ld-new a.o b.o
internal error, aborting at ../../bfd/elf32-ppc.c:7952 in ppc_elf_relocate_section
Reviewed By: adalava
Differential Revision: https://reviews.llvm.org/D66925
llvm-svn: 370426
Summary:
Reported in https://github.com/opencv/opencv/issues/15413.
We have serveral extended mnemonics for Move To/From Vector-Scalar Register Instructions
eg: mffprd,mtfprd etc.
We only support one of them, this patch add the others.
Reviewers: nemanjai, steven.zhang, hfinkel, #powerpc
Reviewed By: hfinkel
Subscribers: wuzish, qcolombet, hiraditya, kbarton, MaskRay, shchenz, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D66963
llvm-svn: 370411
Summary:
I'm not planning to check this in at the moment, but feedback is very welcome, in particular how this affects performance.
The feedback obtains here will guide the next steps towards enabling this.
This patch enables the use of MemorySSA in the loop pass manager.
Passes that currently use MemorySSA:
- EarlyCSE
Passes that use MemorySSA after this patch:
- EarlyCSE
- LICM
- SimpleLoopUnswitch
Loop passes that update MemorySSA (and do not use it yet, but could use it after this patch):
- LoopInstSimplify
- LoopSimplifyCFG
- LoopUnswitch
- LoopRotate
- LoopSimplify
- LCSSA
Loop passes that do *not* update MemorySSA:
- IndVarSimplify
- LoopDelete
- LoopIdiom
- LoopSink
- LoopUnroll
- LoopInterchange
- LoopUnrollAndJam
- LoopVectorize
- LoopReroll
- IRCE
Reviewers: chandlerc, george.burgess.iv, davide, sanjoy, gberry
Subscribers: jlebar, Prazek, dmgreen, jdoerfert, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D58311
llvm-svn: 370384
This implements constrained floating point intrinsics for FP to signed and
unsigned integers.
Quoting from D32319:
The purpose of the constrained intrinsics is to force the optimizer to
respect the restrictions that will be necessary to support things like the
STDC FENV_ACCESS ON pragma without interfering with optimizations when
these restrictions are not needed.
Reviewed by: Andrew Kaylor, Craig Topper, Hal Finkel, Cameron McInally, Roman Lebedev, Kit Barton
Approved by: Craig Topper
Differential Revision: http://reviews.llvm.org/D63782
llvm-svn: 370228
(-X) * (-Y) + Z --> X * Y + Z
This is a missing optimization that shows up as a potential regression in D66050,
so we should solve it first. We appear to be partly missing this fold in IR as well.
We do handle the simpler case already:
(-X) * (-Y) --> X * Y
And it might be beneficial to make the constraint less conservative (eg, if both
operands are cheap, but not necessarily cheaper), but that causes infinite looping
for the existing fmul transform.
Differential Revision: https://reviews.llvm.org/D66755
llvm-svn: 370071
Summary:
Adds support for emitting common local global symbols to an XCOFF object file.
Local commons are emitted into the .bss section with a storage class of
C_HIDEXT.
Patch by: daltenty
Reviewers: sfertile, hubert.reinterpretcast
Differential Revision: https://reviews.llvm.org/D66097
llvm-svn: 370070
This reverts commit b3d258fc44.
@skatkov is reporting crash in D63972#1646303
Contacted @ZhangKang, and revert the commit on behalf of him.
llvm-svn: 370069
Summary:
Adds support for generating the .data section in assembly files for global variables with a non-zero initialization. The support for writing the .data section in XCOFF object files will be added in a follow-on patch. Any relocations are not included in this patch.
Reviewers: hubert.reinterpretcast, sfertile, jasonliu, daltenty, Xiangling_L
Reviewed by: hubert.reinterpretcast
Subscribers: nemanjai, hiraditya, kbarton, MaskRay, jsji, wuzish, shchenz, DiggerLin, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D66154
llvm-svn: 369869
The smin opcode and friends for v1i128 are incorrectly marked as legal for PPC.
Change them to expand.
Differential Revision: https://reviews.llvm.org/D64960
llvm-svn: 369797
Patch https://reviews.llvm.org/D43256 introduced more aggressive loop layout optimization which depends on profile information. If profile information is not available, the statically estimated profile information(generated by BranchProbabilityInfo.cpp) is used. If user program doesn't behave as BranchProbabilityInfo.cpp expected, the layout may be worse.
To be conservative this patch restores the original layout algorithm in plain mode. But user can still try the aggressive layout optimization with -force-precise-rotation-cost=true.
Differential Revision: https://reviews.llvm.org/D65673
llvm-svn: 369664
Summary: These nodes end up being processed regardless due to DAGCombiner ensuring arguments are processed. This changes the order in which nodes are processed, which fixes an issue on PowerPC.
Reviewers: craig.topper, efriedma, RKSimon, lebedev.ri, mcberg2017, stefanp, hfinkel
Subscribers: nemanjai, MaskRay, jsji, steven.zhang, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D66548
llvm-svn: 369662
Adds Wrapper classes for MCSymbol and MCSection into the XCOFF target
object writer. Also adds a class to represent the top-level sections, which we
materialize in the ObjectWriter.
executePostLayoutBinding will map all csects into the appropriate
container depending on its storage mapping class, and map all symbols
into their containing csect. Once all symbols have been processed we
- Assign addresses and symbol table indices.
- Calaculte section sizes.
- Build the section header table.
- Assign the sections raw-pointer value for non-virtual sections.
Since the .bss section is virtual, writing the header table is enough to
add support. Writing of a sections raw data, or of any relocations is
not included in this patch.
Testing is done by dumping the section header table, but it needs to be
extended to include dumping the symbol table once readobj support for
dumping auxiallary entries lands.
Differential Revision: https://reviews.llvm.org/D65159
llvm-svn: 369454
Summary:
If we have a MI marked with bitcast bits, but without input operands,
PeepholeOptimizer might crash with assert.
eg:
If we apply the changes in PPCInstrVSX.td as in this patch:
[(set v4i32:$XT, (bitconvert (v16i8 immAllOnesV)))]>;
We will get assert in PeepholeOptimizer.
```
llvm-lit llvm-project/llvm/test/CodeGen/PowerPC/build-vector-tests.ll -v
llvm-project/llvm/include/llvm/CodeGen/MachineInstr.h:417: const
llvm::MachineOperand &llvm::MachineInstr::getOperand(unsigned int)
const: Assertion `i < getNumOperands() && "getOperand() out of range!"'
failed.
```
The fix is to abort if we found out of bound access.
Reviewers: qcolombet, MatzeB, hfinkel, arsenm
Reviewed By: qcolombet
Subscribers: wdng, arsenm, steven.zhang, wuzish, nemanjai, hiraditya, kbarton, MaskRay, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D65542
llvm-svn: 369261
Summary:
Fix a bug of preducessors.
In `block-placement` pass, it will create some patterns for unconditional we can do the simple early retrun.
But the `early-ret` pass is before `block-placement`, we don't want to run it again.
This patch is to do the simple early return to optimize the blocks at the last of `block-placement`.
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D63972
llvm-svn: 369191
Summary:
xxspltib/vspltisb are 3 cycle PM instructions,
xxleqv is 2 cycle ALU instruction.
We should use xxleqv to set all one vectors.
Reviewers: hfinkel, nemanjai, steven.zhang
Subscribers: hiraditya, kbarton, MaskRay, shchenz, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D65529
llvm-svn: 369006
Summary:
This patch has trigger a bug of r368339, and the r368339 has been reverted, So upstream this patch again.
In `block-placement` pass, it will create some patterns for unconditional we can do the simple early retrun.
But the `early-ret` pass is before `block-placement`, we don't want to run it again.
This patch is to do the simple early return to optimize the blocks at the last of `block-placement`.
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D63972
llvm-svn: 368997
This patch implements global address lowering for 32/64 bit with small/large code models.
1.For 32bit large code model on AIX, there are newly added pseudo opcode LWZtocL & ADDIStocHA32, the support of which on MC layer will be
provided by future patches.
2.The default code model on AIX should be small code model.
3.Since AIX does not have medium code model, "report_fatal_error" when users specify it.
Differential Revision: https://reviews.llvm.org/D63547
llvm-svn: 368744
Trying again with the code changes (and not just the new test).
Summary:
This patch fixes the offsets of fields in the stack frame linkage save
area for AIX.
Reviewers: sfertile, hubert.reinterpretcast, jasonliu, Xiangling_L, xingxue, ZarkoCA, daltenty
Reviewed By: hubert.reinterpretcast
Subscribers: wuzish, nemanjai, hiraditya, kbarton, MaskRay, jsji, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D64424
Patch by Chris Bowler!
llvm-svn: 368721
Summary:
This patch fixes the offsets of fields in the stack frame linkage save
area for AIX.
Reviewers: sfertile, hubert.reinterpretcast, jasonliu, Xiangling_L, xingxue, ZarkoCA, daltenty
Reviewed By: hubert.reinterpretcast
Subscribers: wuzish, nemanjai, hiraditya, kbarton, MaskRay, jsji, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D64424
Patch by Chris Bowler!
llvm-svn: 368691
The legalizer would hit an assertion on PowerPC platform when truncating
a vector whose size is not power of 2. This patch is to add a check to
prevent vectors with such odd-size elements from being custom lowered.
Reviewed By: Hal Finkel
Differential Revision: https://reviews.llvm.org/D65261
llvm-svn: 368654
It caused assertions to fire when building Chromium:
lib/CodeGen/LiveDebugValues.cpp:331: bool
{anonymous}::LiveDebugValues::OpenRangesSet::empty() const: Assertion
`Vars.empty() == VarLocs.empty() && "open ranges are inconsistent"' failed.
See https://crbug.com/992871#c3 for how to reproduce.
> Patch https://reviews.llvm.org/D43256 introduced more aggressive loop layout optimization which depends on profile information. If profile information is not available, the statically estimated profile information(generated by BranchProbabilityInfo.cpp) is used. If user program doesn't behave as BranchProbabilityInfo.cpp expected, the layout may be worse.
>
> To be conservative this patch restores the original layout algorithm in plain mode. But user can still try the aggressive layout optimization with -force-precise-rotation-cost=true.
>
> Differential Revision: https://reviews.llvm.org/D65673
llvm-svn: 368579
Summary:
In `block-placement` pass, it will create some patterns for unconditional we can do the simple early retrun.
But the `early-ret` pass is before `block-placement`, we don't want to run it again.
This patch is to do the simple early return to optimize the blocks at the last of `block-placement`.
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D63972
llvm-svn: 368565
> In `block-placement` pass, it will create some patterns for unconditional we can do the simple early retrun.
> But the `early-ret` pass is before `block-placement`, we don't want to run it again.
> This patch is to do the simple early return to optimize the blocks at the last of `block-placement`.
>
> Reviewed By: efriedma
>
> Differential Revision: https://reviews.llvm.org/D63972
This also revertes follow-ups r368514 and r368532.
llvm-svn: 368560
Summary:
In `block-placement` pass, it will create some patterns for unconditional we can do the simple early retrun.
But the `early-ret` pass is before `block-placement`, we don't want to run it again.
This patch is to do the simple early return to optimize the blocks at the last of `block-placement`.
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D63972
llvm-svn: 368509
Summary:
This is exposed by adding a new testcase in PowerPC in
https://reviews.llvm.org/rL367732
The testcase got different output on different platform, hence breaking
buildbots.
The problem is that we get differnt FuncUnitOrder when calculateResMII.
The root cause is:
1. Two MachineInstr might get SAME priority(MFUsx) from minFuncUnits.
2. Current comparison operator() will return `MFUs1 > MFUs2`.
3. We use iterators for MachineInstr, so the input to FuncUnitSorter
might be different on differnt platform due to the iterator nature.
So for two MI with same MFU, their order is actually depends on the
iterator order, which is platform (implemtation) dependent.
This is risky, and may cause cross-compiling problems.
The fix is to check make sure we assign a determine order when they are
equal.
Reviewers: bcahoon, hfinkel, jmolloy
Subscribers: nemanjai, hiraditya, MaskRay, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D65992
llvm-svn: 368441
Patch https://reviews.llvm.org/D43256 introduced more aggressive loop layout optimization which depends on profile information. If profile information is not available, the statically estimated profile information(generated by BranchProbabilityInfo.cpp) is used. If user program doesn't behave as BranchProbabilityInfo.cpp expected, the layout may be worse.
To be conservative this patch restores the original layout algorithm in plain mode. But user can still try the aggressive layout optimization with -force-precise-rotation-cost=true.
Differential Revision: https://reviews.llvm.org/D65673
llvm-svn: 368339
Summary:
This patch enable assembly output of local commons for AIX using .lcomm
directives. Adds a EmitXCOFFLocalCommonSymbol to MCStreamer so we can emit the
AIX version of .lcomm assembly directives which include a csect name. Handle the
case of BSS locals in PPCAIXAsmPrinter by using EmitXCOFFLocalCommonSymbol. Adds
a test for generating .lcomm on AIX Targets.
Reviewers: cebowleratibm, hubert.reinterpretcast, Xiangling_L, jasonliu, sfertile
Reviewed By: sfertile
Subscribers: wuzish, nemanjai, hiraditya, kbarton, MaskRay, jsji, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D64825
llvm-svn: 368306
This patch changes the DAG legalizer to respect the operation actions
set by the target for strict floating-point operations. (Currently, the
legalizer will usually fall back to mutate to the non-strict action
(which is assumed to be legal), and only skip mutation if the strict
operation is marked legal.)
With this patch, if whenever a strict operation is marked as Legal or
Custom, it is passed to the target as usual. Only if it is marked as
Expand will the legalizer attempt to mutate to the non-strict operation.
Note that this will now fail if the non-strict operation is itself
marked as Custom -- the target will have to provide a Custom definition
for the strict operation then as well.
Reviewed By: hfinkel
Differential Revision: https://reviews.llvm.org/D65226
llvm-svn: 368012
In PowerPC, there is instruction to load vector in big endian element order when it's in little endian target.
So we can combine vector load + reverse into big endian load to eliminate the swap instruction.
Also combine vector reverse + store into big endian store.
Differential Revision: https://reviews.llvm.org/D65063
llvm-svn: 367516
Summary: Honoring no signed zeroes is also available as a user control through clang separately regardless of fastmath or UnsafeFPMath context, DAG guards should reflect this context.
Reviewers: spatel, arsenm, hfinkel, wristow, craig.topper
Reviewed By: spatel
Subscribers: rampitec, foad, nhaehnle, wuzish, nemanjai, jvesely, wdng, javed.absar, MaskRay, jsji
Differential Revision: https://reviews.llvm.org/D65170
llvm-svn: 367486
In PowerPC, there is instruction to load vector in big endian element order when it's in little endian target.
So we can combine vector load + reverse into big endian load to eliminate the swap instruction.
Also combine vector reverse + store into big endian store.
llvm-svn: 367382
Addresses number of comment made on D64652 after commiting:
- Reorders function decls in the TargetLoweringObjectFileXCOFF class.
- Fix comment in MCSectionXCOFF to include description of external reference
csects.
- Convert several llvm_unreachables to report_fatal_error
- Convert several dyn_casts to casts as they are expected not to fail.
- Avoid copying DataLayout object.
llvm-svn: 367324
Adds machine operand lowering for MCSymbolSDNodes to the PowerPC
backend. This is needed to produce call instructions in assembly for AIX
because the callee operand is a MCSymbolSDNode. The test is XFAIL'ed for
asserts due to a (valid) assertion in PEI that the AIX ABI isn't supported yet.
Differential Revision: https://reviews.llvm.org/D63738
llvm-svn: 367133
Summary:
In `block-placement` pass, it will create some patterns for unconditional we can do the simple early retrun.
But the `early-ret` pass is before `block-placement`, we don't want to run it again.
This patch is to do the simple early return to optimize the blocks at the last of `block-placement`.
Below is an example
```
BB: | BB:
XOR 3, 3, 4 | XOR 3, 3, 4
B TBB | B ChainBB
... | ...
ChainBB: | ChainBB:
B TBB | ADD 3, 3, 4
... | BLR
TBB: |
ADD 3, 3, 4 |
BLR |
```
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D63972
llvm-svn: 367080
Currently, stack protector loads and stores are resolved during
LocalStackSlotAllocation (if the pass needs to run). When this is the
case, the base register assigned to the frame access is going to be one
of the vregs created during LocalStackSlotAllocation. This means that we
are keeping a pointer to the stack protector slot, and we're using this
pointer to load and store to it.
In case register pressure goes up, we may end up spilling this pointer
to the stack, which can be a security concern.
Instead, leave it to PEI to resolve the frame accesses. In order to do
that, we make all stack protector accesses go through frame index
operands, then PEI will resolve this using an offset from sp/fp/bp.
Differential Revision: https://reviews.llvm.org/D64759
llvm-svn: 367068
Summary:
This was originally reported in D62818.
https://rise4fun.com/Alive/oPH
InstCombine does the opposite fold, in hope that `C l>>/<< Y` expression
will be hoisted out of a loop if `Y` is invariant and `X` is not.
But as it is seen from the diffs here, if it didn't get hoisted,
the produced assembly is almost universally worse.
Much like with my recent "hoist add/sub by/from const" patches,
we should get almost universal win if we hoist constant,
there is almost always an "and/test by imm" instruction,
but "shift of imm" not so much, so we may avoid having to
materialize the immediate, and thus need one less register.
And since we now shift not by constant, but by something else,
the live-range of that something else may reduce.
Special care needs to be applied not to disturb x86 `BT` / hexagon `tstbit`
instruction pattern. And to not get into endless combine loop.
Reviewers: RKSimon, efriedma, t.p.northover, craig.topper, spatel, arsenm
Reviewed By: spatel
Subscribers: hiraditya, MaskRay, wuzish, xbolva00, nikic, nemanjai, jvesely, wdng, nhaehnle, javed.absar, tpr, kristof.beyls, jsji, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62871
llvm-svn: 366955
Currently PowerPC backend emits code like this:
r3 = li 0
std r3, 264(r1)
r3 = li 0
std r3, 272(r1)
This patch fixes that and other cases where a register already contains a value that is loaded so we will get:
r3 = li 0
std r3, 264(r1)
std r3, 272(r1)
Differential Revision: https://reviews.llvm.org/D64220
llvm-svn: 366840
Replace float load/store pair with integer load/store pair when it's only used in load/store,
because float load/store instructions cost more cycles then integer load/store.
A typical scenario is when there is a call with more than 13 float arguments passing, we need pass them by stack.
So we need a load/store pair to do such memory operation if the variable is global variable.
Differential Revision: https://reviews.llvm.org/D64195
llvm-svn: 366775
Summary:
Since we are planning to add ADDIStocHA for 32bit in later patch, we decided
to change 64bit one first to follow naming convention with 8 behind opcode.
Patch by: Xiangling_L
Differential Revision: https://reviews.llvm.org/D64814
llvm-svn: 366731
Stubs out a TargetLoweringObjectFileXCOFF class, implementing only
SelectSectionForGlobal for common symbols. Also adds an override of
EmitGlobalVariable in PPCAIXAsmPrinter which adds a number of defensive errors
and adds support for emitting common globals.
llvm-svn: 366727
Summary:
Current PRE hoists common computations into
CMBB = DT->findNearestCommonDominator(MBB, MBB1).
However, if CMBB is in a hot loop body, we might get performance
degradation.
Differential Revision: https://reviews.llvm.org/D64394
llvm-svn: 366570
The LocalStackSlotPass pre-allocates a stack protector and makes sure
that it comes before the local variables on the stack.
We need to make sure that later during PEI we don't re-allocate a new
stack protector slot. If that happens, the new stack protector slot will
end up being **after** the local variables that it should be protecting.
Therefore, we would have two slots assigned for two different stack
protectors, one at the top of the stack, and one at the bottom. Since
PEI will overwrite the assigned slot for the stack protector, the load
that is used to compare the value of the stack protector will use the
slot assigned by PEI, which is wrong.
For this, we need to check if the object is pre-allocated, and re-use
that pre-allocated slot.
Differential Revision: https://reviews.llvm.org/D64757
llvm-svn: 366371
Summary:
Pointed out in a comment for D49754, register spilling will currently
spill SPE registers at almost any offset. However, the instructions
`evstdd` and `evldd` require a) 8-byte alignment, and b) a limit of 256
(unsigned) bytes from the base register, as the offset must fix into a
5-bit offset, which ranges from 0-31 (indexed in double-words).
The update to the register spill test is taken partially from the test
case shown in D49754.
Additionally, pointed out by Kei Thomsen, globals will currently use
evldd/evstdd, though the offset isn't known at compile time, so may
exceed the 8-bit (unsigned) offset permitted. This fixes that as well,
by forcing it to always use evlddx/evstddx when accessing globals.
Part of the patch contributed by Kei Thomsen.
Reviewers: nemanjai, hfinkel, joerg
Subscribers: kbarton, jsji, llvm-commits
Differential Revision: https://reviews.llvm.org/D54409
llvm-svn: 366318
Summary:
This is exposed by our internal testing.
The reduced testcase will assert with "Impossible reg-to-reg copy"
We can't use COPY to do 32-bit to 64-bit conversion.
Reviewers: kbarton, hfinkel, nemanjai
Reviewed By: hfinkel
Subscribers: hiraditya, MaskRay, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D64499
llvm-svn: 366255
Summary:
Problem exposed in PowerPC functional testing.
We did not consider Anti dependence for nodes in same cycle,
so we may end up generating bad machine code.
eg: the reduced test won't verify.
*** Bad machine code: Using an undefined physical register ***
- function: lame_encode_buffer_interleaved
- basic block: %bb.4 (0x4bde4e12928)
- instruction: %29:gprc = ADDZE %27:gprc, implicit-def dead $carry, implicit $carry
- operand 3: implicit $carry
Reviewers: bcahoon, kparzysz, hfinkel
Subscribers: MaskRay, wuzish, nemanjai, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D64192
llvm-svn: 365859
Stubs out a number of the classes needed to produce a new object file format
(XCOFF) for the powerpc-aix target. For testing input is an empty module which
produces an object file with just a file header.
Differential Revision: https://reviews.llvm.org/D61694
llvm-svn: 365541
Summary:
`extsw` and `sldi` are supposed to be combined if they are in the same
BB in instruction selection phase. This patch handles the case where
extsw and sldi are not in the same BB.
Differential Revision: https://reviews.llvm.org/D63806
llvm-svn: 365430
Summary:
This is exposed by functional testing on PowerPC.
In some pipelined loops, Phi refer to phi did not get value defined by
the Phi, hence getting wrong value later.
As the comment mentioned, we should "use the value defined by the Phi,
unless we're generating the firstepilog and the Phi refers to a Phi
in a different stage.", so Phi refering to same stage Phi should use
the value defined by the Phi here.
Reviewers: bcahoon, hfinkel
Reviewed By: hfinkel
Subscribers: MaskRay, wuzish, nemanjai, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D64035
llvm-svn: 365428
The indirect call sequence on PPC requires that the TOC base register be saved
prior to the indirect call and restored after the call since the indirect call
may branch to a global entry point in another DSO which will update the TOC
base. Over the last couple of years, we have improved this to:
- be able to hoist TOC saves from loops (with changes to MachineLICM)
- avoid multiple saves when one dominates the other[s]
However, it is still possible to have multiple TOC saves dynamically in the
execution path if there is no dominance relationship between them.
This patch moves the TOC save to the prologue when one of the TOC saves is in a
block that post-dominates entry (i.e. it cannot be avoided) or if it is in a
block that is hotter than entry.
Differential revision: https://reviews.llvm.org/D63803
llvm-svn: 365232
Summary:
"ww" and "ws" are both constraint codes for VSX vector registers that
hold scalar double data. "ww" is preferred for float while "ws" is
preferred for double.
Reviewed By: jsji
Differential Revision: https://reviews.llvm.org/D64119
llvm-svn: 365106
Summary:
This is the backend part of [[ https://bugs.llvm.org/show_bug.cgi?id=42457 | PR42457 ]].
In middle-end, we'd want to prefer the form with two adds - D63992,
but as this diff shows, not every target will prefer that pattern.
Out of 4 targets for which i added tests all seem to be ok with inc-of-add for scalars,
but only X86 prefer that same pattern for vectors.
Here i'm adding a new TLI hook, always defaulting to the inc-of-add,
but adding AArch64,ARM,PowerPC overrides to prefer inc-of-add only for scalars.
Reviewers: spatel, RKSimon, efriedma, t.p.northover, hfinkel
Reviewed By: efriedma
Subscribers: nemanjai, javed.absar, kristof.beyls, kbarton, jsji, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D64090
llvm-svn: 365010
I initially committed it with --check-prefix instead of --check-prefixes
(again, shame on me, and utils/update_*.py not complaining!)
and did not have a moment to understand the failure,
so i reverted it initially in rL64939.
llvm-svn: 364945
As it is pointed out in https://reviews.llvm.org/D63992,
before we get to pick canonical variant in middle-end
we should ensure best codegen in backend.
llvm-svn: 364930
After implemented this hook, we will model the memory dependency in the scheduling dependency graph more precise,
and will have more opportunity to reorder the load/stores, as they didn't have the dependency at some condition
Differential Revision: https://reviews.llvm.org/D63804
llvm-svn: 364886
Summary:
SCRUB_LOOP_COMMENT_RE was introduced in https://reviews.llvm.org/D31285
This works for some loops.
However, we may generate lines with loop comments only.
And since we don't scrub leading white spaces, this will leave an empty
line there, and FileCheck will complain it.
eg: llvm/test/CodeGen/PowerPC/PR35812-neg-cmpxchg.ll:27:15:
error: found empty check string with prefix 'CHECK:'
; CHECK-NEXT:
This prevented us from using the `update_llc_test_checks.py` for quite some cases.
We should still keep the comment token there, so that we can safely
scrub the loop comment without breaking FileCheck.
Reviewers: timshen, hfinkel, lebedev.ri, RKSimon
Subscribers: nemanjai, jfb, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D63957
llvm-svn: 364775
This was reported in https://bugs.llvm.org/show_bug.cgi?id=41751
llvm-mc aborted when disassembling tabortdc.
This patch try to clean up TM related DAGs.
* Fixes the problem by remove explicit output of cr0, and put it as implicit def.
* Update int_ppc_tbegin pattern to accommodate the implicit def of cr0.
* Update the TCHECK operand and int_ppc_tcheck accordingly.
* Add some builtin test and disassembly tests.
* Remove unused CRRC0/crrc0
Differential Revision: https://reviews.llvm.org/D61935
llvm-svn: 364544
This allows later passes (in particular InstCombine) to optimize more
cases.
One that's important to us is `memcmp(p, q, constant) < 0` and memcmp(p, q, constant) > 0.
llvm-svn: 364412
For some reason, the update_llc_checks.py script produces checks for
empty lines which cause failures. Corrected that to check for actual
text produced by llc.
llvm-svn: 364377
An upcoming patch will modify the behaviour with respect to saving the TOC
in functions with indirect calls.
Adding a test case so the patch will show the difference in codegen.
llvm-svn: 364375
This was just an omission in the back end. We have had the instructions for both
single and double precision for a few HW generations, but never got around to
legalizing these.
Differential revision: https://reviews.llvm.org/D63634
llvm-svn: 364373
When we calculate MII, we use two loops, one with iterator R++ to
check whether we can reserve the resource, then --R to move back
the iterator to do reservation.
This is risky, as R++, --R may not point to the same element at all.
The can cause wrong MII.
Differential Revision: https://reviews.llvm.org/D63536
llvm-svn: 364353
Summary:
In Secure PLT ABI, -fpic is similar to -fPIC. The differences are that:
* -fpic stores the address of _GLOBAL_OFFSET_TABLE_ in r30, while -fPIC stores .got2+0x8000.
* -fpic uses an addend of 0 for R_PPC_PLTREL24, while -fPIC uses 0x8000.
Reviewers: hfinkel, jhibbits, joerg, nemanjai, spetrovic
Reviewed By: jhibbits
Subscribers: adalava, kbarton, jsji, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D63563
llvm-svn: 364324
Widen vector result type for ctlz_zero_undef and cttz_zero_undef the same as
ctlz and cttz.
Differential Revision: https://reviews.llvm.org/D63463
llvm-svn: 364221
There are quite some old testcases with powerpc- triple,
we should add this triple support so that we can update them with script.
Differential Revision: https://reviews.llvm.org/D63723
llvm-svn: 364213
This allows targets to make more decisions about reserved registers
after isel. For example, now it should be certain there are calls or
stack objects in the frame or not, which could have been introduced by
legalization.
Patch by Matthias Braun
llvm-svn: 363757
This adds vector splitting for vaarg instructions during type legalization
Committed on behalf of @luke (Luke Lau)
Differential Revision: https://reviews.llvm.org/D60762
llvm-svn: 363671
This patch changes MIR stack-id from an integer to an enum,
and adds printing/parsing support for this in MIR files. The default
stack-id '0' is now renamed to 'default'.
This should make MIR tests that have stack objects with different stack-ids
more descriptive. It also clarifies code operating on StackID.
Reviewers: arsenm, thegameg, qcolombet
Reviewed By: arsenm
Differential Revision: https://reviews.llvm.org/D60137
llvm-svn: 363533
Summary:
SPE passes doubles the same as soft-float, in register pairs as i32
types. This is all handled by the target-independent layer. However,
this is not optimal when splitting or reforming the doubles, as it
pushes to the stack and loads from, on either side.
For instance, to pass a double argument to a function, assuming the
double value is in r5, the sequence currently looks like this:
evstdd 5, X(1)
lwz 3, X(1)
lwz 4, X+4(1)
Likewise, to form a double into r5 from args in r3 and r4:
stw 3, X(1)
stw 4, X+4(1)
evldd 5, X(1)
This optimizes the fence to use SPE instructions. Now, to pass a double
to a function:
mr 4, 5
evmergehi 3, 5, 5
And to form a double into r5 from args in r3 and r4:
evmergelo 5, 3, 4
This is comparable to the way that gcc generates the double splits.
This also fixes a bug with expanding builtins to libcalls, where the
LowerCallTo() code path was generating intermediate illegal type nodes.
Reviewers: nemanjai, hfinkel, joerg
Subscribers: kbarton, jfb, jsji, llvm-commits
Differential Revision: https://reviews.llvm.org/D54583
llvm-svn: 363526
Summary:
If the nested loop is an innermost loop, prefer to a 32-byte alignment, so that
we can decrease cache misses and branch-prediction misses. Actual alignment of
the loop will depend on the hotness check and other logic in alignBlocks.
The old code will only align hot loop to 32 bytes when the LoopSize larger than
16 bytes and smaller than 32 bytes, this patch will align the innermost hot loop
to 32 bytes not only for the hot loop whose size is 16~32 bytes.
Reviewed By: steven.zhang, jsji
Differential Revision: https://reviews.llvm.org/D61228
llvm-svn: 363495
Current findBestLoopTop can find and move one kind of block to top, a latch block has one successor. Another common case is:
* a latch block
* it has two successors, one is loop header, another is exit
* it has more than one predecessors
If it is below one of its predecessors P, only P can fall through to it, all other predecessors need a jump to it, and another conditional jump to loop header. If it is moved before loop header, all its predecessors jump to it, then fall through to loop header. So all its predecessors except P can reduce one taken branch.
Differential Revision: https://reviews.llvm.org/D43256
llvm-svn: 363471
This was exposed by PowerPC target enablement.
In ScheduleDAG, if we haven't seen any uses in this scheduling region,
we will create a dependence edge to ExitSU to model the live-out latency.
This is required for vreg defs with no in-region use, and prefetches with
no vreg def.
When we build NodeOrder in Scheduler, we ignore these boundary nodes.
However, when we check Succs in checkValidNodeOrder, we did not skip
them, so we still assume all the nodes have been sorted and in order in
Indices array. So when we call lower_bound() for ExitSU, it will return
Indices.end(), causing memory issues in following Node access.
Differential Revision: https://reviews.llvm.org/D63282
llvm-svn: 363329
Summary:
Relate bug: https://bugs.llvm.org/show_bug.cgi?id=37472
The shrink wrapping pass prematurally restores the stack, at a point where the stack might still be accessed.
Taking an exception can cause the stack to be corrupted.
As a first approach, this patch is overly conservative, assuming that any instruction that may load or store could access
the stack.
Reviewers: dmgreen, qcolombet
Reviewed By: qcolombet
Subscribers: simpal01, efriedma, eli.friedman, javed.absar, llvm-commits, eugenis, chill, carwil, thegameg
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D63152
llvm-svn: 363265
Looks like a MachinePipeliner algorithm problem found by
sanitizer-x86_64-linux-fast.
I will backout this test first while investigating the problem to
unblock buildbot.
==49637==ERROR: AddressSanitizer: heap-buffer-overflow on address
0x614000002e08 at pc 0x000004364350 bp 0x7ffe228a3bd0 sp 0x7ffe228a3bc8
READ of size 4 at 0x614000002e08 thread T0
#0 0x436434f in
llvm::SwingSchedulerDAG::checkValidNodeOrder(llvm::SmallVector<llvm::NodeSet,
8u> const&) const
/b/sanitizer-x86_64-linux-fast/build/llvm/lib/CodeGen/MachinePipeliner.cpp:3736:11
#1 0x4342cd0 in llvm::SwingSchedulerDAG::schedule()
/b/sanitizer-x86_64-linux-fast/build/llvm/lib/CodeGen/MachinePipeliner.cpp:486:3
#2 0x434042d in
llvm::MachinePipeliner::swingModuloScheduler(llvm::MachineLoop&)
/b/sanitizer-x86_64-linux-fast/build/llvm/lib/CodeGen/MachinePipeliner.cpp:385:7
#3 0x433eb90 in
llvm::MachinePipeliner::runOnMachineFunction(llvm::MachineFunction&)
/b/sanitizer-x86_64-linux-fast/build/llvm/lib/CodeGen/MachinePipeliner.cpp:207:5
#4 0x428b7ea in
llvm::MachineFunctionPass::runOnFunction(llvm::Function&)
/b/sanitizer-x86_64-linux-fast/build/llvm/lib/CodeGen/MachineFunctionPass.cpp:73:13
#5 0x4d1a913 in llvm::FPPassManager::runOnFunction(llvm::Function&)
/b/sanitizer-x86_64-linux-fast/build/llvm/lib/IR/LegacyPassManager.cpp:1648:27
#6 0x4d1b192 in llvm::FPPassManager::runOnModule(llvm::Module&)
/b/sanitizer-x86_64-linux-fast/build/llvm/lib/IR/LegacyPassManager.cpp:1685:16
#7 0x4d1c06d in runOnModule
/b/sanitizer-x86_64-linux-fast/build/llvm/lib/IR/LegacyPassManager.cpp:1752:27
#8 0x4d1c06d in llvm::legacy::PassManagerImpl::run(llvm::Module&)
/b/sanitizer-x86_64-linux-fast/build/llvm/lib/IR/LegacyPassManager.cpp:1865
#9 0xa48ca3 in compileModule(char**, llvm::LLVMContext&)
/b/sanitizer-x86_64-linux-fast/build/llvm/tools/llc/llc.cpp:611:8
#10 0xa4270f in main
/b/sanitizer-x86_64-linux-fast/build/llvm/tools/llc/llc.cpp:365:22
#11 0x7fec902572e0 in __libc_start_main
(/lib/x86_64-linux-gnu/libc.so.6+0x202e0)
#12 0x971b69 in _start
(/b/sanitizer-x86_64-linux-fast/build/llvm_build_asan/bin/llc+0x971b69)
llvm-svn: 363105
Implement necessary target hooks to enable MachinePipeliner for P9 only.
The pass is off by default, can be enabled with -ppc-enable-pipeliner for P9.
Differential Revision: https://reviews.llvm.org/D62164
llvm-svn: 363085
This was found during HTM cleanup.
Adding a test for builtin_ttest would expose following issue.
*** Bad machine code: Illegal physical register for instruction ***
- function: test10
- basic block: %bb.0 entry (0xf0e57497b58)
- instruction: %5:crrc0 = TABORTWCI 0, $zero, 0
- operand 2: $zero
$zero is not a GPRC register.
LLVM ERROR: Found 1 machine code errors.
Differential Revision: https://reviews.llvm.org/D63079
llvm-svn: 362974
This opportunity is found from spec 2017 557.xz_r. And it is used by the sha encrypt/decrypt. See sha-2/sha512.c
static void store64(u64 x, unsigned char* y)
{
for(int i = 0; i != 8; ++i)
y[i] = (x >> ((7-i) * 8)) & 255;
}
static u64 load64(const unsigned char* y)
{
u64 res = 0;
for(int i = 0; i != 8; ++i)
res |= (u64)(y[i]) << ((7-i) * 8);
return res;
}
The load64 has been implemented by https://reviews.llvm.org/D26149
This patch is trying to implement the store pattern.
Match a pattern where a wide type scalar value is stored by several narrow
stores. Fold it into a single store or a BSWAP and a store if the targets
supports it.
Assuming little endian target:
i8 *p = ...
i32 val = ...
p[0] = (val >> 0) & 0xFF;
p[1] = (val >> 8) & 0xFF;
p[2] = (val >> 16) & 0xFF;
p[3] = (val >> 24) & 0xFF;
>
*((i32)p) = val;
i8 *p = ...
i32 val = ...
p[0] = (val >> 24) & 0xFF;
p[1] = (val >> 16) & 0xFF;
p[2] = (val >> 8) & 0xFF;
p[3] = (val >> 0) & 0xFF;
>
*((i32)p) = BSWAP(val);
Differential Revision: https://reviews.llvm.org/D62897
llvm-svn: 362921
When we call checkResourceLimit in bumpCycle or bumpNode, and we
know the resource count has just reached the limit (the equations
are equal). We should return true to mark that we are resource
limited for next schedule, or else we might continue to schedule
in favor of latency for 1 more schedule and create a schedule that
actually overbook the resource.
When we call checkResourceLimit to estimate the resource limite before
scheduling, we don't need to return true even if the equations are
equal, as it shouldn't limit the schedule for it .
Differential Revision: https://reviews.llvm.org/D62345
llvm-svn: 362805
Patch which introduces a target-independent framework for generating
hardware loops at the IR level. Most of the code has been taken from
PowerPC CTRLoops and PowerPC has been ported over to use this generic
pass. The target dependent parts have been moved into
TargetTransformInfo, via isHardwareLoopProfitable, with
HardwareLoopInfo introduced to transfer information from the backend.
Three generic intrinsics have been introduced:
- void @llvm.set_loop_iterations
Takes as a single operand, the number of iterations to be executed.
- i1 @llvm.loop_decrement(anyint)
Takes the maximum number of elements processed in an iteration of
the loop body and subtracts this from the total count. Returns
false when the loop should exit.
- anyint @llvm.loop_decrement_reg(anyint, anyint)
Takes the number of elements remaining to be processed as well as
the maximum numbe of elements processed in an iteration of the loop
body. Returns the updated number of elements remaining.
llvm-svn: 362774
Use the PPC vector min/max instructions for computing the corresponding
operation as these should be faster than the compare/select sequences
we currently emit.
Differential revision: https://reviews.llvm.org/D47332
llvm-svn: 362759
Summary:
(1) Function descriptor on AIX
On AIX, a called routine may have 2 distinct symbols associated with it:
* A function descriptor (Name)
* A function entry point (.Name)
The descriptor structure on AIX is the same as those in the ELF V1 ABI:
* The address of the entry point of the function.
* The TOC base address for the function.
* The environment pointer.
The descriptor symbol uses the same name as the source level function in C.
The function entry point is analogous to the symbol we would generate for a
function in a non-descriptor-based ABI, except that it is renamed by
prepending a ".".
Which symbol gets referenced depends on the context:
* Taking the address of the function references the descriptor symbol.
* Calling the function references the entry point symbol.
(2) Speaking of implementation on AIX, for direct function call target, we
create proper MCSymbol SDNode(e.g . ".foo") while constructing SDAG to
replace original TargetGlobalAddress SDNode. Then down the path, we can
take advantage of this MCSymbol.
Patch by: Xiangling_L
Reviewed by: sfertile, hubert.reinterpretcast, jasonliu, syzaara
Differential Revision: https://reviews.llvm.org/D62532
llvm-svn: 362735
Summary:
This patch implements SDAG call lowering on AIX for functions
which only have parameters that could fit into GPRs.
Reviewers: hubert.reinterpretcast, syzaara
Differential Revision: https://reviews.llvm.org/D62823
llvm-svn: 362708
Generally speaking, we lower to an optimal rotate sequence for nodes visible in
the SDAG. However, there are instances where the two rotates are not visible at
ISEL time - most notably those in a very common sequence when lowering switch
statements to jump tables.
A common situation is a switch on a 32-bit integer. This value has to have the
upper 32 bits cleared and because jump table offsets are word offsets, the value
needs to be shifted left by 2 bits. We currently emit the clear and the left
shift as two separate instructions, but this is not needed as we can lower it to
a single RLDIC.
This patch just cleans that up.
Differential revision: https://reviews.llvm.org/D60402
llvm-svn: 362576
NFC commit of a test case in order for the subsequent review to show differences
in codegen.
Differential revision: https://reviews.llvm.org/D62843
llvm-svn: 362573
This is to address some of the problems in existing P9 resource modeling,
especially about the dispatching rules.
Instead of using a hypothetical DISPATCHER , we try to use the number of
actual dispatch slots, and define SchedWriteRes to model dispatch rules,
then update instruction classes according to dispatch rules.
All the dispatch rules and instruction classes update are made according
to POWER9 User Manual.
Differential Revision: https://reviews.llvm.org/D61873
llvm-svn: 362509
This opportunity is found from spec 2017 557.xz_r. And it is used by the sha encrypt/decrypt. See sha-2/sha512.c
static void store64(u64 x, unsigned char* y)
{
for(int i = 0; i != 8; ++i)
y[i] = (x >> ((7-i) * 8)) & 255;
}
static u64 load64(const unsigned char* y)
{
u64 res = 0;
for(int i = 0; i != 8; ++i)
res |= (u64)(y[i]) << ((7-i) * 8);
return res;
}
The load64 has been implemented by https://reviews.llvm.org/D26149
This patch is trying to implement the store pattern.
Match a pattern where a wide type scalar value is stored by several narrow
stores. Fold it into a single store or a BSWAP and a store if the targets
supports it.
Assuming little endian target:
i8 *p = ...
i32 val = ...
p[0] = (val >> 0) & 0xFF;
p[1] = (val >> 8) & 0xFF;
p[2] = (val >> 16) & 0xFF;
p[3] = (val >> 24) & 0xFF;
>
*((i32)p) = val;
i8 *p = ...
i32 val = ...
p[0] = (val >> 24) & 0xFF;
p[1] = (val >> 16) & 0xFF;
p[2] = (val >> 8) & 0xFF;
p[3] = (val >> 0) & 0xFF;
>
*((i32)p) = BSWAP(val);
Differential Revision: https://reviews.llvm.org/D61843
llvm-svn: 362472
Kai Luo