This patch fixes a bug in dotest.py where lldb.selected_platform was
being set to host platform even after a successful connection to a
remote platform via platform url. This patch fixes this behavior and
sets selected_platform to remote_platform after a successful connection.
This patch also removes target_platform variable from run_suite.
Reviewed By: JDevlieghere
Differential Revision: https://reviews.llvm.org/D105060
This adds a basic SB API for creating and stopping traces.
Note: This doesn't add any APIs for inspecting individual instructions. That'd be a more complicated change and it might be better to enhande the dump functionality to output the data in binary format. I'll leave that for a later diff.
This also enhances the existing tests so that they test the same flow using both the command interface and the SB API.
I also did some cleanup of legacy code.
Differential Revision: https://reviews.llvm.org/D103500
This is just a dotest check to see if we can compile a simple program that uses
libc++. Right now we are parsing the rather big `algorithm` header in the test
program, but the test really just checks whether we can find *any* libc++
headers and link against some libc++ SO. Using the much smaller `cassert` header
for checking whether we can find libc++ headers speeds up this check by a bit.
After some incredibly unscientific performance testing this saves a few seconds
when running the test suite on Linux (on macOS we hardcoded that libc++ is
always there, so this check won't be used there and we don't save any time).
Reviewed By: jankratochvil
Differential Revision: https://reviews.llvm.org/D101056
Enable reporting fork/vfork events to the server when supported.
At this moment, this is used only to test the server code, as real
client does not report fork-events and vfork-events as supported.
Differential Revision: https://reviews.llvm.org/D100208
Introduce a NativeProcessProtocol API for indicating support for
protocol extensions and enabling them. LLGS calls
GetSupportedExtensions() method on the process factory to determine
which extensions are supported by the plugin. If the future is both
supported by the plugin and reported as supported by the client, LLGS
enables it and reports to the client as supported by the server.
The extension is enabled on the process instance by calling
SetEnabledExtensions() method. This is done after qSupported exchange
(if the debugger is attached to any process), as well as after launching
or attaching to a new inferior.
The patch adds 'fork' extension corresponding to 'fork-events+'
qSupported feature and 'vfork' extension for 'vfork-events+'. Both
features rely on 'multiprocess+' being supported as well.
Differential Revision: https://reviews.llvm.org/D100153
Print a single line listing all the categories that are being skipped,
rather than relying on the check.*Support() functions specifying why a
particular category will be skipped. If we know why a category got
skipped, still print that in verbose mode.
The motivation for this change is that sometimes engineers misidentify
the output of these messages as the cause for a test failure (e.g. not
being able to build libc++ or libstdc++).
Differential revision: https://reviews.llvm.org/D100508
Split out the common base of Linux hardware breakpoint/watchpoint
support for AArch64 into a Utility class, and use it to implement
the matching support on FreeBSD.
Differential Revision: https://reviews.llvm.org/D96548
This reapplies 7df4eaaa93/D96202, which was reverted due to issues on
windows. These were caused by problems in the computation of the liblldb
directory, which was fixed by D96779.
The original commit message was:
Our test configuration logic assumes that the tests can be run either
with debugserver or with lldb-server. This is not entirely correct,
since lldb server has two "personalities" (platform server and debug
server) and debugserver is only a replacement for the latter.
A consequence of this is that it's not possible to test the platform
behavior of lldb-server on macos, as it is not possible to get a hold of
the lldb-server binary.
One solution to that would be to duplicate the server configuration
logic to be able to specify both executables. However, that seems
excessively redundant.
A well-behaved lldb should be able to find the debug server on its own,
and testing lldb with a different (lldb-|debug)server does not seem very
useful (even in the out-of-tree debugserver setup, we copy the server
into the build tree to make it appear "real").
Therefore, this patch deletes the configuration altogether and changes
the low-level server retrieval functions to be able to both lldb-server
and debugserver paths. They do this by consulting the "support
executable" directory of the lldb under test.
Differential Revision: https://reviews.llvm.org/D96202
Our test configuration logic assumes that the tests can be run either
with debugserver or with lldb-server. This is not entirely correct,
since lldb server has two "personalities" (platform server and debug
server) and debugserver is only a replacement for the latter.
A consequence of this is that it's not possible to test the platform
behavior of lldb-server on macos, as it is not possible to get a hold of
the lldb-server binary.
One solution to that would be to duplicate the server configuration
logic to be able to specify both executables. However, that seems
excessively redundant.
A well-behaved lldb should be able to find the debug server on its own,
and testing lldb with a different (lldb-|debug)server does not seem very
useful (even in the out-of-tree debugserver setup, we copy the server
into the build tree to make it appear "real").
Therefore, this patch deletes the configuration altogether and changes
the low-level server retrieval functions to be able to both lldb-server
and debugserver paths. They do this by consulting the "support
executable" directory of the lldb under test.
Differential Revision: https://reviews.llvm.org/D96202
Replace the dotest command line options and various cmake variables,
which are used for passing the locations of llvm tools to the API tests
with a single variable, which points to the directory these tools are
placed in. Besides reducing repetition, this also makes things more
similar to how "normal" llvm tests are configured.
Differential Revision: https://reviews.llvm.org/D95261
On my Debian machine, system libc++/libc++abi is not installed (`libc++1-9 libc++abi-9`),
21 check-lldb-api tests fail because -stdlib=libc++ linked executables cannot
find runtime libc++.so.1 at runtime.
Use the `-Wl,-rpath,$(LLVM_LIBS_DIR)` mechanism in
`packages/Python/lldbsuite/test/make/Makefile.rules` (D58630 for NetBSD) to
allow such tests compile/link with fresh libc++ built beside lldb.
(A system libc++.so.1 is not guaranteed to match fresh libc++ header files.)
Some tweaks to the existing NetBSD rule when generalizing:
* Drop `-L$(LLVM_LIBS_DIR)` since Clang driver adds it correctly.
* Add `-stdlib=libc++` only for `USE_LIBCPP`.
Also, drop `-isystem /usr/include/c++/v1` introduced in D9426. It is not needed
by Clang driver. GCC using libc++ requires more setup.
I don't find any test needing `-Wl,-rpath` in `test/Shell/helper/{build,toolchain}.py` (D58630 for NetBSD added them).
Reviewed By: labath
Differential Revision: https://reviews.llvm.org/D94888
The tests don't work with remote debugservers. This isn't a problem with
any particular test, but the test infrastructure itself, which is why
each of these tests has a @skipIfDarwinEmbedded decorator.
This patch replaces that with a central category-based solution. It also
moves the ad-hoc windows skipping mechanism there too.
Test runs log some of their output to files inside the LLDB session dir. This
session dir is shared between all tests, so all the tests have to make sure they
choose a unique file name inside that directory. We currently choose by default
`<test-class-name>-<test-method-name>` as the log file name. However, that means
that if not every test class in the test suite has a unique class name, then we
end up with a race condition as two tests will try to write to the same log
file.
I already tried in D83767 changing the format to use the test file basename
instead (which we already require to be unique for some other functionality),
but it seems the code for getting the basename didn't work on Windows.
This patch instead just changes that dotest stores the log files in the build
directory for the current test. We know that directory is unique for this test,
so no need to generate some unique file name now. Also removes all the
environment vars and parameters related to the now unused session dir.
The new log paths now look like this for a failure in 'TestCppOperators`:
```
./lldb-test-build.noindex/lang/cpp/operators/TestCppOperators.test_dwarf/Failure.log
./lldb-test-build.noindex/lang/cpp/operators/TestCppOperators.test_dsym/Failure.log
./lldb-test-build.noindex/lang/cpp/operators/TestCppOperators.test_gmodules/Failure.log
```
Reviewed By: labath
Differential Revision: https://reviews.llvm.org/D92498
Replace the plethora of ObjC-implied 'skipUnlessDarwin' decorators
with marking tests as 'objc' category (whenever missing), and skip all
ObjC tests on non-Darwin platforms. I have used '.categories' file
wherever it was present already or all (>1) tests were relying on ObjC,
and explicit add_test_categories() where there was only one test.
Differential Revision: https://reviews.llvm.org/D91056
Use positive logic (i.e. llgs_platform/debugserver_platform) for
indicating which platforms use the particular server variant.
Deduplicate the lists — it is rather expected that none of the platforms
using LLGS would use debugserver.
Differential Revision: https://reviews.llvm.org/D90875
The new FreeBSDRemote plugin has reached feature parity on i386
and amd64 targets. Use it by default on these architectures, while
allowing the use of the legacy plugin via FREEBSD_LEGACY_PLUGIN envvar.
Revisit the method of switching plugins. Apparently, the return value
of PlatformFreeBSD::CanDebugProcess() is what really decides whether
the legacy or the new plugin is used.
Update the test status. Reenable the tests that were previously
disabled on FreeBSD and do not cause hangs or are irrelevant to FreeBSD.
Mark all tests that fail reliably as expectedFailure. For now, tests
that are flaky (i.e. produce unstable results) are left enabled
and cause unpredictable test failures.
Differential Revision: https://reviews.llvm.org/D90757
If the SDK name passed to dotest can't be found by `xcrun` we silently fall back
to the default SDK. This leads to rather cryptic errors being reported later on
when linking the actual test executables.
Instead just directly log and abort when this situation is encountered and
inform the user about the invalid argument.
Reviewed By: JDevlieghere
Differential Revision: https://reviews.llvm.org/D89053
This patch fixes a few issues seen when running `ninja check-lldb` in a Release build with VS2017:
- Some binaries couldn't be found (such as lldb-vscode.exe), because .exe wasn't appended to the file name.
- Many tests used to fail since our installed locale is in French - the OS error messages are not emitted in English.
- Our codepage being Windows-1252, python failed to decode some error messages with accentuations.
Differential Revision: https://reviews.llvm.org/D88975
Simplify the logic of parsing the lldb -P output to find the python
path. This removes the special handling for the LLDB.framework case and
instead of pattern matching known errors focus on finding a directory
path that contains an __init__.py.
Differential revision: https://reviews.llvm.org/D88840
Register the `faulthandler` module so we can see what lldb tests are doing when they misbehave (e.g. run under a test runner that sets a timeout). This will print a stack trace for the following signals:
- `SIGSEGV`, `SIGFPE`, `SIGABRT`, `SIGBUS`, and `SIGILL` (via `faulthandler.enable()`)
- `SIGTERM` (via `faulthandler.register(SIGTERM)`) [This is what our test runners sends when it times out].
The only signal we currently handle is `SIGINT` (via `unittest2.signals.installHandler()`) so there should be no overlap added by this patch.
Because this import is not available until python3, and the `register()` method is not available on Windows, this is enabled defensively.
This should have absolutely no effect when tests are passing (or even normally failing), but can be observed by running this while ninja is running:
```
kill -s SIGTERM $(ps aux | grep dotest.py | head -1 | awk '{print $2}')
```
Reviewed By: JDevlieghere
Differential Revision: https://reviews.llvm.org/D87637
This patch removes the rather confusing LLDB_LIB_DIR and LLDB_IMPLIB_DIR
environment variables. They are confusing because LLDB_LIB_DIR would
point to the bin subdirectory in the build root while LLDB_IMPLIB_DIR
would point to the lib subdirectory. The reason far this was
LLDB.framework, which gets build under bin.
This patch replaces their uses with configuration.lldb_framework_path
and configuration.lldb_libs_dir respectively.
Differential revision: https://reviews.llvm.org/D86817
The logic behind --rerun-all-issues was removed when we switched to LIT
as the test driver. This patch just removes the dotest option and
corresponding entry in configuration.py.
This patch stores the --apple-sdk argument in the dotest configuration.
When it's set, use it instead of the triple to determine the current
platform.
Differential revision: https://reviews.llvm.org/D85537
In these two cases, use of `os.path.realpath` is problematic:
- The name of the compiler is significant [1] . For testing purposes, we might
provide a compiler called "clang" which is actually a symlink to some build
script (which does some flag processing before invoking the real clang). The
destination the symlink may not be called "clang", but we still want it to be
treated as such.
- When using a build system that puts build artifacts in an arbitrary build
location, and later creates a symlink for it (e.g. creates a
"<lldb root>/lldbsuite/test/dotest.py" symlinks that points to
"/build/artifact/<hash>/dotest.py"), looking at the realpath will not match
the "test" convention required here.
[1] See `Makefile.rules` in the lldb tree, e.g. we use different flags if the compiler is named "clang"
Reviewed By: JDevlieghere
Differential Revision: https://reviews.llvm.org/D85175
If the test suite is misconfigured when it's run (a bad regexp, wrong test directory, etc.), the test suite may not discover any tests. When this happens, the test runner exits happily because no tests failed:
```
Ran 0 tests in 0.000s
RESULT: PASSED (0 passes, 0 failures, 0 errors, 0 skipped, 0 expected failures, 0 unexpected successes)
```
Change this to return an error so the misconfiguration can be more easily detected. Verified that `lldb-dotest -p TestDoesNotExist.py` successfully fails.
Reviewed By: JDevlieghere
Differential Revision: https://reviews.llvm.org/D85169
After more investigation, I realised this part of the code is totally
unused. It was used for communicating the test results from the
"inferior" dotest process to the main "dosep" process running
everything. Now that everything is being orchestrated through lit, this
is not used for anything.
Summary:
My understanding is that this was added to make dotest interact well
with the GreenDragon bots, back when dotest was the main test driver.
Now that everything goes through lit (which has its own xunit
formatter), it seems largely irrelevant.
There are more cleanups that can be done after removing this be done
here, but this should be enough to test the waters.
Reviewers: JDevlieghere
Subscribers: lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D83545
This gets rid of some surprising interplay between the flags.
Mainly needed because of Rosetta debugserver & Apple Silicon.
Differential Revision: https://reviews.llvm.org/D82804
and delete a bunch (but not all) redundant code. If you compare the remaining implementations of Platform*Simulator.cpp, there is still an obvious leftover cleanup task.
Specifically, this patch
- removes SDK initialization from dotest (there is equivalent but more
complete code in Makefile.rules)
- make Platform*Simulator inherit the generic implementation of
PlatformAppleSimulator (more can be done here)
- simplify the platform logic in Makefile.rules
- replace the custom SDK finding logic in Platform*Simulator with XcodeSDK
- adds a test for each supported simulator
Differential Revision: https://reviews.llvm.org/D81980
The different tools constructing dotest invocations (lit and
lldb-dotest) already print the command invocation so there's no need to
print it again in the dotest output.
My motivation for removing it is that it doesn't include the Python
interpreter and every time I accidentally copy it, the command fails
with an `ImportError`.
Differential revision: https://reviews.llvm.org/D81032
Don't use the environment to pass values to the builder that are present
in the dotest configuration module. A subsequent patch will pass the
remaining values through the configuration instead of the environment.
[intel-pt] Improve the way the test determines whether to run
- Now I'm creating a default value for the new test parameter
- I fixed a small mistake in the skipping logic of the test
... I forgot to clear the cmake cache when testing my diff
Summary:
@labath raised a concern on the way I was skipping this test. I think that was
fair and I found a better way.
Now I'm skipping if the CMAKE flag LLDB_BUILD_INTEL_PT is false.
I added an enabled_plugins entry in the dotest configuration, which gets
set by lit or lldb-dotest. The only available plugin right now is
'intel-pt', but I imagine it will be useful in the future for other
kinds of plugins that get determined at configuration time. I didn't
want to add a new argument option --enable-intel-pt or something or the
sort, as it wouldn't be useful for other cases.
Reviewers: labath, clayborg
Subscribers: lldb-commits, labath
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D77452
Make it possible to capture reproducers from the API test suite. Given
the symmetry between capture and replay, this patch also adds the
necessary code for replay. For now this is a NO-OP until the
corresponding reproducer instrumentation changes land.
For more info please refer to the RFC on lldb-dev:
http://lists.llvm.org/pipermail/lldb-dev/2020-April/016100.html
Differential revision: https://reviews.llvm.org/D77588
Using the approach suggested by Pavel in D77588, this patch introduces a
new lldbconfig module that lives next to the lldb module. It makes it
possible to make the lldb module configurable before importing it. More
specifically it makes it possible to delay initializing the debugger,
which is needed for testing the reproducer.
Differential revision: https://reviews.llvm.org/D77661
Jonas Devlieghere