Motivated by work on changing our representation of unordered atomics in SelectionDAG, but as an aside, all our lowerings for O3 are terrible. Even the ones which ignore the atomicity.
llvm-svn: 371449
Declare the family of AnnotateIgnore[Read,Write][Begin,End] TSan
annotations in compiler-rt/test/tsan/test.h so that we don't have to
declare them separately in every test that needs them. Replace usages.
Leave usages that explicitly test the annotation mechanism:
thread_end_with_ignore.cpp
thread_end_with_ignore3.cpp
llvm-svn: 371446
Summary:
Appease failed builds (due to -Werror and -Wswitch) where OMPRT_Unknown
is not handled in the switch statement (even though it's handled by the
early exit).
This fixes -Wswitch triggered by r371442.
Reviewers: srhines, danalbert, jdoerfert
Subscribers: guansong, cfe-commits
Tags: #clang
Differential Revision: https://reviews.llvm.org/D67364
llvm-svn: 371444
Summary:
This option is true by default in sanitizer common. The default
false value was added a while ago without any reasoning in
524e934112
so, presumably it's safe to remove for consistency.
Reviewers: hctim, samsonov, morehouse, kcc, vitalybuka
Reviewed By: hctim, samsonov, vitalybuka
Subscribers: delcypher, #sanitizers, llvm-commits, kcc
Tags: #llvm, #sanitizers
Differential Revision: https://reviews.llvm.org/D67193
llvm-svn: 371442
This is the first patch in a large sequence. The eventual goal is to have unordered atomic loads and stores - and possibly ordered atomics as well - handled through the normal ISEL codepaths for loads and stores. Today, there handled w/instances of AtomicSDNodes. The result of which is that all transforms need to be duplicated to work for unordered atomics. The benefit of the current design is that it's harder to introduce a silent miscompile by adding an transform which forgets about atomicity. See the thread on llvm-dev titled "FYI: proposed changes to atomic load/store in SelectionDAG" for further context.
Note that this patch is NFC unless the experimental flag is set.
The basic strategy I plan on taking is:
introduce infrastructure and a flag for testing (this patch)
Audit uses of isVolatile, and apply isAtomic conservatively*
piecemeal conservative* update generic code and x86 backedge code in individual reviews w/tests for cases which didn't check volatile, but can be found with inspection
flip the flag at the end (with minimal diffs)
Work through todo list identified in (2) and (3) exposing performance ops
(*) The "conservative" bit here is aimed at minimizing the number of diffs involved in (4). Ideally, there'd be none. In practice, getting it down to something reviewable by a human is the actual goal. Note that there are (currently) no paths which produce LoadSDNode or StoreSDNode with atomic MMOs, so we don't need to worry about preserving any behaviour there.
We've taken a very similar strategy twice before with success - once at IR level, and once at the MI level (post ISEL).
Differential Revision: https://reviews.llvm.org/D66309
llvm-svn: 371441
Handle it the same way as G_BUILD_VECTOR_TRUNC. Arguably only
G_BUILD_VECTOR_TRUNC should be legal for this, but G_BUILD_VECTOR will
probably be more convenient in most cases.
llvm-svn: 371440
I verified that the test is red without the interceptors.
rdar://40334350
Reviewed By: kubamracek, vitalybuka
Differential Revision: https://reviews.llvm.org/D66616
llvm-svn: 371439
Summary:
For Gnu, FreeBSD and NetBSD, this option forces linking with the static
OpenMP host runtime (similar to -static-libgcc and -static-libstdcxx).
Android's NDK will start the shared OpenMP runtime in addition to the static
libomp. In this scenario, the linker will prefer to use the shared library by
default. Add this option to enable linking with the static libomp.
Reviewers: Hahnfeld, danalbert, srhines, joerg, jdoerfert
Subscribers: guansong, cfe-commits
Tags: #clang
Fixes https://github.com/android-ndk/ndk/issues/1028
Differential Revision: https://reviews.llvm.org/D67200
llvm-svn: 371437
If analyzeBranch fails, on some targets, the out parameters point to
some blocks in the function. But we can't use that information, so make
sure to clear it out. (In some places in IfConversion, we assume that
any block with a TrueBB is analyzable.)
The change to the testcase makes it trigger a bug on builds without this
fix: IfConvertDiamond tries to perform a followup "merge" operation,
which isn't legal, and we somehow end up with a branch to a deleted MBB.
I'm not sure how this doesn't crash the compiler.
Differential Revision: https://reviews.llvm.org/D67306
llvm-svn: 371434
This enables GlobalISel to handle various intrinsics. The custom node
pattern will be ignored, and the intrinsic will work. This will also
allow SelectionDAG to directly select the intrinsics, but as they are
all custom lowered to the nodes, this ends up leaving dead code in the
table.
Eventually either GlobalISel should add the equivalent of custom nodes
equivalent, or intrinsics should be directly used. These each have
different tradeoffs.
There are a few more to handle, but these are easy to handle
ones. Some others fail for other reasons.
llvm-svn: 371432
Current for SAE instructions we only allow _MM_FROUND_CUR_DIRECTION(bit 2) or _MM_FROUND_NO_EXC(bit 3) to be used as the immediate passed to the inrinsics. But these instructions don't perform rounding so _MM_FROUND_CUR_DIRECTION is just sort of a default placeholder when you don't want to suppress exceptions. Using _MM_FROUND_NO_EXC by itself is really bit equivalent to (_MM_FROUND_NO_EXC | _MM_FROUND_TO_NEAREST_INT) since _MM_FROUND_TO_NEAREST_INT is 0. Since we aren't rounding on these instructions we should also accept (_MM_FROUND_CUR_DIRECTION | _MM_FROUND_NO_EXC) as equivalent to (_MM_FROUND_NO_EXC). icc allows this, but gcc does not.
Differential Revision: https://reviews.llvm.org/D67289
llvm-svn: 371430
The bitstream remark serializer landed in r367372.
This adds a bitstream remark parser that parser bitstream remark files
to llvm::remarks::Remark objects through the RemarkParser interface.
A few interesting things to point out:
* There are parsing helpers to parse the different types of blocks
* The main parsing helper allows us to parse remark metadata and open an
external file containing the encoded remarks
* This adds a dependency from the Remarks library to the BitstreamReader
library
* The testing strategy is to create a remark entry through YAML, parse
it, serialize it to bitstream, parse that back and compare the objects.
* There are close to no tests for malformed bitstream remarks, due to
the lack of textual format for the bitstream format.
* This adds a new C API for parsing bitstream remarks:
LLVMRemarkParserCreateBitstream.
* This bumps the REMARKS_API_VERSION to 1.
Differential Revision: https://reviews.llvm.org/D67134
llvm-svn: 371429
microMIPS jump and link exchange instruction stores a target in a
26-bits field. Despite other microMIPS JAL instructions these bits
are target address shifted right 2 bits [1]. The patch fixes the
JALX instruction decoding and uses 2-bit shift.
[1] MIPS Architecture for Programmers Volume II-B: The microMIPS32 Instruction Set
Differential Revision: https://reviews.llvm.org/D67320
llvm-svn: 371428
Unfortunately MnemonicAlias defines a "Predicates" field just like an
instruction or pattern, with a somewhat different interpretation.
This ends up overriding the intended Predicates set by
PredicateControl on the pseudoinstruction defintions with an empty
list. This allowed incorrectly selecting instructions that should have
been rejected due to the SubtargetPredicate from patterns on the
instruction definition.
This does remove the divergent predicate from the 64-bit shift
patterns, which were already not used for the 32-bit shift, so I'm not
sure what the point was. This also removes a second, redundant copy of
the 64-bit divergent patterns.
llvm-svn: 371427
Just return once you emit the call, which is exactly what SelectionDAG does in
this situation.
Update call-translator-tail-call.ll.
Also update dllimport.ll to show that we tail call here in GISel again. Add
-verify-machineinstrs to the GISel line too, to defend against verifier
failures.
Differential revision: https://reviews.llvm.org/D67282
llvm-svn: 371425
Treat this as legal on gfx9 since it can use S_PACK_* instructions for
this.
This isn't used by anything yet. The same will probably apply to
16-bit G_BUILD_VECTOR without the trunc.
llvm-svn: 371423
This fixes a bug as well. When "FileSize:" (p_filesz) is specified and
different from the actual value, the following code probably should not
use PHeader.p_filesz:
if (SHeader->sh_offset == PHeader.p_offset + PHeader.p_filesz)
PHeader.p_memsz += SHeader->sh_size;
Reviewed By: jhenderson
Differential Revision: https://reviews.llvm.org/D67256
llvm-svn: 371420
These predicate vectors can usually be loaded and stored with a single
instruction, a VSTR_P0. However this instruction will store the entire P0
predicate, 16 bits, zeroextended to 32bits. Each lane of the the
v4i1/v8i1/v16i1 representing 4/2/1 bits.
As far as I understand, when llvm says "store this v4i1", it really does need
to store 4 bits (or 8, that being the size of a byte, with this bottom 4 as the
interesting bits). For example a bitcast from a v8i1 to a i8 is defined as a
store followed by a load, which is how the code is expanded.
So this instead lowers the v4i1/v8i1 load/store through some shuffles to get
the bits into the correct positions. This, as you might imagine, is not as
efficient as a single instruction. But I believe it is needed for correctness.
v16i1 equally should not load/store 32bits, only storing the 16bits of data.
Stack loads/stores are still using the VSTR_P0 (as can be seen by the test not
changing). This is fine as they are self-consistent, it is only "externally
observable loads/stores" (from our point of view) that need to be corrected.
Differential revision: https://reviews.llvm.org/D67085
llvm-svn: 371419
Summary:
This takes ~5% of time when running clangd unit tests.
To achieve this, move mapping of system includes out of CanonicalIncludes
and into a separate class
Reviewers: sammccall, hokein
Reviewed By: sammccall
Subscribers: MaskRay, jkorous, arphaman, kadircet, jfb, cfe-commits
Tags: #clang
Differential Revision: https://reviews.llvm.org/D67172
llvm-svn: 371408
The family of 'dual-accumulating' vector multiply-add instructions
(VMLADAV, VMLALDAV and VRMLALDAVH) can all operate on both signed and
unsigned integer types, and they all have an 'exchange' variant (with
an X in the name) that modifies which pairs of vector lanes in the two
inputs are multiplied together. But there's a clause in the spec that
says that the X variants //don't// operate on unsigned integer types,
only signed. You can have X, or unsigned, or neither, but not both.
We didn't notice that clause when we implemented the MC support for
these instructions, so LLVM believes that things like VMLADAVX.U8 do
exist, contradicting the spec. Here I fix that by conditioning them
out in Tablegen.
In order to do that, I've reversed the nesting order of the Tablegen
multiclasses for those instructions. Previously, the innermost
multiclass generated the X and not-X variants, and the one outside
that generated the A and not-A variants. Now X is done by the outer
multiclass, which allows me to bypass that one when I only want the
two not-X variants.
Changing the multiclass nesting order also changes the names of the
instruction ids unless I make a special effort not to. I decided that
while I was changing them anyway I'd make them look nicer; so now the
instructions have names like MVE_VMLADAVs32 or MVE_VMLADAVaxs32,
instead of cumbersome _noacc_noexch suffixes.
The corresponding multiply-subtract instructions are unaffected. Those
don't accept unsigned types at all, either in the spec or in LLVM.
Reviewers: ostannard, dmgreen
Subscribers: javed.absar, kristof.beyls, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D67214
llvm-svn: 371405
Summary:
We still attempt to highlight them as underlying types, but fallback to
the generic 'typedef' highlighting kind if the underlying type is too
complicated.
Reviewers: hokein
Reviewed By: hokein
Subscribers: nridge, MaskRay, jkorous, arphaman, kadircet, cfe-commits
Tags: #clang
Differential Revision: https://reviews.llvm.org/D67290
llvm-svn: 371402
Most builtins accepting or returning long double use the fp_t typedef.
Change the remaining few cases to do so.
Differential Revision: https://reviews.llvm.org/D35034
llvm-svn: 371400
Reapply with fix to reduce resources required by the compiler - use
unsigned[2] instead of std::pair. This causes clang and gcc to compile
the generated file multiple times faster, and hopefully will reduce
the resource requirements on Visual Studio also. This fix is a little
ugly but it's clearly the same issue the previous author of
DFAPacketizer faced (the previous tables use unsigned[2] rather uglily
too).
This patch allows the DFAPacketizer to be queried after a packet is formed to work out which
resources were allocated to the packetized instructions.
This is particularly important for targets that do their own bundle packing - it's not
sufficient to know simply that instructions can share a packet; which slots are used is
also required for encoding.
This extends the emitter to emit a side-table containing resource usage diffs for each
state transition. The packetizer maintains a set of all possible resource states in its
current state. After packetization is complete, all remaining resource states are
possible packetization strategies.
The sidetable is only ~500K for Hexagon, but the extra tracking is disabled by default
(most uses of the packetizer like MachinePipeliner don't care and don't need the extra
maintained state).
Differential Revision: https://reviews.llvm.org/D66936
llvm-svn: 371399
Philip Reames