All these headers already depend on CodeGen headers so moving them into
CodeGen fixes the layering (since CodeGen depends on Target, not the
other way around).
llvm-svn: 318490
This is a refactoring/cleanup of Arm `addrmode2` operand class. The patch
removes it completely.
Differential Revision: https://reviews.llvm.org/D39832
llvm-svn: 318291
Moves encoding (SYSm) information of banked registers to ARMSystemRegister.td,
where it rightly belongs and forms a single point of reference in the code.
Reviewed by: @fhahn, @rovka, @olista01
Differential Revision: https://reviews.llvm.org/D36219
llvm-svn: 309910
This patch cleans up and fixes issues in the M-Class system register handling:
1. It defines the system registers and the encoding (SYSm values) in one place:
a new ARMSystemRegister.td using SearchableTable, thereby removing the
hand-coded values which existed in multiple places.
2. Some system registers e.g. BASEPRI_MAX_NS which do not exist were being allowed!
Ref: ARMv6/7/8M architecture reference manual.
Reviewed by: @t.p.northover, @olist01, @john.brawn
Differential Revision: https://reviews.llvm.org/D35209
llvm-svn: 308456
Constants are crucial for code size in the ARM Thumb-1 instruction
set. The 16 bit instruction size often does not offer enough space
for immediate arguments. This means that additional instructions are
frequently used to load constants into registers. Since constants are
hoisted, this can lead to significant register spillage if they are
used multiple times in a single function. This can be avoided by
rematerialization, i.e. recomputing a constant instead of reloading
it from the stack. This patch fixes the rematerialization of literal
pool loads in the ARM Thumb instruction set.
Patch by Philip Ginsbach
Differential Revision: https://reviews.llvm.org/D33936
llvm-svn: 308004
When we replaced the multiplicand the destination node might already exist.
When that happens the original gets CSEd and deleted. However, it's actually
used as the offset so nonsense is produced.
Should fix PR32726.
llvm-svn: 301983
Before, we assumed that any ConstantInt offset was precisely the access width,
so we could use the "[rN]!" form. ISelLowering only ever created that kind, but
further simplification during combining could lead to unexpected constants and
incorrect codegen.
Should fix PR32658.
llvm-svn: 300878
This will become asan errors once the patch lands that poisons the
memory after free. The x86 change is a hack, but I don't see how to
solve this properly at the moment.
llvm-svn: 300867
Create nodes for smulwb and smulwt and move their selection from
DAGToDAG to DAG combine. smlawb and smlawt can then be selected
using tablegen. Added some helper functions to detect shift patterns
as well as a wrapper around SimplifyDemandBits. Added a couple of
extra tests.
Differential Revision: https://reviews.llvm.org/D30708
llvm-svn: 297716
ARMISD::ADD[CE] nodes, instead of the generic ISD::ADD[CE].
Summary:
This allows for some simplification because the combines
are no longer limited to just one go at the node before
it gets legalized into an ARM target-specific one.
Reviewers: jmolloy, rogfer01
Subscribers: aemerson, llvm-commits, rengolin
Differential Revision: https://reviews.llvm.org/D30401
llvm-svn: 297453
In the encoding of system registers in the M-class MSR instruction the mask bits
should be 2 for registers that don't take a _<bits> qualifier (the instruction
is unpredictable otherwise), and should also be 2 if the register takes a
_<bits> qualifier but it's not present as no _<bits> is an alias for _nzcvq.
Differential Revision: https://reviews.llvm.org/D29828
llvm-svn: 294762
Currently, there are substantial problems forming vld1_dup even if the
VDUP survives legalization. The lack of an actual node
leads to terrible results: not only can we not form post-increment vld1_dup
instructions, but we form scalar pre-increment and post-increment
loads which force the loaded value into a GPR. This patch fixes that
by combining the vdup+load into an ARMISD node before DAGCombine
messes it up.
Also includes a crash fix for vld2_dup (see testcase @vld2dupi8_postinc_variable).
Recommiting with fix to avoid forming vld1dup if the type of the load
doesn't match the type of the vdup (see
https://llvm.org/bugs/show_bug.cgi?id=31404).
Differential Revision: https://reviews.llvm.org/D27694
llvm-svn: 289972
This is essentially a recommit of r285893, but with a correctness fix. The
problem of the original commit was that this:
bic r5, r7, #31
cbz r5, .LBB2_10
got rewritten into:
lsrs r5, r7, #5
beq .LBB2_10
The result in destination register r5 is not the same and this is incorrect
when r5 is not dead. So this fix includes checking the uses of the AND
destination register. And also, compared to the original commit, some regression
tests didn't need changing anymore because of this extra check.
For completeness, this was the original commit message:
For the common pattern (CMPZ (AND x, #bitmask), #0), we can do some more
efficient instruction selection if the bitmask is one consecutive sequence of
set bits (32 - clz(bm) - ctz(bm) == popcount(bm)).
1) If the bitmask touches the LSB, then we can remove all the upper bits and
set the flags by doing one LSLS.
2) If the bitmask touches the MSB, then we can remove all the lower bits and
set the flags with one LSRS.
3) If the bitmask has popcount == 1 (only one set bit), we can shift that bit
into the sign bit with one LSLS and change the condition query from NE/EQ to
MI/PL (we could also implement this by shifting into the carry bit and
branching on BCC/BCS).
4) Otherwise, we can emit a sequence of LSLS+LSRS to remove the upper and lower
zero bits of the mask.
1-3 require only one 16-bit instruction and can elide the CMP. 4 requires two
16-bit instructions but can elide the CMP and doesn't require materializing a
complex immediate, so is also a win.
Differential Revision: https://reviews.llvm.org/D27761
llvm-svn: 289794
Currently, there are substantial problems forming vld1_dup even if the
VDUP survives legalization. The lack of an actual node
leads to terrible results: not only can we not form post-increment vld1_dup
instructions, but we form scalar pre-increment and post-increment
loads which force the loaded value into a GPR. This patch fixes that
by combining the vdup+load into an ARMISD node before DAGCombine
messes it up.
Also includes a crash fix for vld2_dup (see testcase @vld2dupi8_postinc_variable).
Differential Revision: https://reviews.llvm.org/D27694
llvm-svn: 289703
This recommits r281323, which was backed out for two reasons. One, a selfhost failure, and two, it apparently caused Chromium failures. Actually, the latter was a red herring. The log has expired from the former, but I suspect that was a red herring too (actually caused by another problematic patch of mine). Therefore reapplying, and will watch the bots like a hawk.
For the common pattern (CMPZ (AND x, #bitmask), #0), we can do some more efficient instruction selection if the bitmask is one consecutive sequence of set bits (32 - clz(bm) - ctz(bm) == popcount(bm)).
1) If the bitmask touches the LSB, then we can remove all the upper bits and set the flags by doing one LSLS.
2) If the bitmask touches the MSB, then we can remove all the lower bits and set the flags with one LSRS.
3) If the bitmask has popcount == 1 (only one set bit), we can shift that bit into the sign bit with one LSLS and change the condition query from NE/EQ to MI/PL (we could also implement this by shifting into the carry bit and branching on BCC/BCS).
4) Otherwise, we can emit a sequence of LSLS+LSRS to remove the upper and lower zero bits of the mask.
1-3 require only one 16-bit instruction and can elide the CMP. 4 requires two 16-bit instructions but can elide the CMP and doesn't require materializing a complex immediate, so is also a win.
llvm-svn: 285893
UMAAL is a DSP instruction and it is not available on thumbv7m
(Cortex-M3) and thumbv6m (Cortex-M0+1) targets. Also fix wrong
CHECK prefix in longMAC.ll test.
Patch by Vadzim Dambrouski.
Differential Revision: https://reviews.llvm.org/D25890
llvm-svn: 285278
This is not a valid encoding - these instructions cannot do PC-relative addressing.
The underlying problem here is of whitelist in ARMISelDAGToDAG that unwraps ARMISD::Wrappers during addressing-mode selection. This didn't realise TargetConstantPool was actually possible, so didn't handle it.
llvm-svn: 283323
ldm and stm instructions always require 4-byte alignment on the pointer, but we
weren't checking this before trying to reduce code-size by replacing a
post-indexed load/store with them. Unfortunately, we were also dropping this
incormation in DAG ISel too, but that's easy enough to fix.
llvm-svn: 281893
For the common pattern (CMPZ (AND x, #bitmask), #0), we can do some more efficient instruction selection if the bitmask is one consecutive sequence of set bits (32 - clz(bm) - ctz(bm) == popcount(bm)).
1) If the bitmask touches the LSB, then we can remove all the upper bits and set the flags by doing one LSLS.
2) If the bitmask touches the MSB, then we can remove all the lower bits and set the flags with one LSRS.
3) If the bitmask has popcount == 1 (only one set bit), we can shift that bit into the sign bit with one LSLS and change the condition query from NE/EQ to MI/PL (we could also implement this by shifting into the carry bit and branching on BCC/BCS).
4) Otherwise, we can emit a sequence of LSLS+LSRS to remove the upper and lower zero bits of the mask.
1-3 require only one 16-bit instruction and can elide the CMP. 4 requires two 16-bit instructions but can elide the CMP and doesn't require materializing a complex immediate, so is also a win.
llvm-svn: 281323
For the common pattern (CMPZ (AND x, #bitmask), #0), we can do some more efficient instruction selection if the bitmask is one consecutive sequence of set bits (32 - clz(bm) - ctz(bm) == popcount(bm)).
1) If the bitmask touches the LSB, then we can remove all the upper bits and set the flags by doing one LSLS.
2) If the bitmask touches the MSB, then we can remove all the lower bits and set the flags with one LSRS.
3) If the bitmask has popcount == 1 (only one set bit), we can shift that bit into the sign bit with one LSLS and change the condition query from NE/EQ to MI/PL (we could also implement this by shifting into the carry bit and branching on BCC/BCS).
4) Otherwise, we can emit a sequence of LSLS+LSRS to remove the upper and lower zero bits of the mask.
1-3 require only one 16-bit instruction and can elide the CMP. 4 requires two 16-bit instructions but can elide the CMP and doesn't require materializing a complex immediate, so is also a win.
llvm-svn: 281215
The CMPZ #0 disappears during peepholing, leaving just a tADDi3, tADDi8 or t2ADDri. This avoids having to materialize the expensive negative constant in Thumb-1, and allows a shrinking from a 32-bit CMN to a 16-bit ADDS in Thumb-2.
llvm-svn: 281040
This is a mechanical change of comments in switches like fallthrough,
fall-through, or fall-thru to use the LLVM_FALLTHROUGH macro instead.
llvm-svn: 278902
Summary: Thumb2 supports encoding immediates with specific patterns into mov.w by splatting the low 8 bits into other bytes.
I'm resubmitting this patch. The test case in the original commit
r277610 does not specify triple, so builds with differnt default triple
will have different output.
This patch fixed trile as thumb-darwin-apple.
Reviewers: john.brawn, jmolloy, bruno
Subscribers: jmolloy, aemerson, rengolin, samparker, llvm-commits
Differential Revision: https://reviews.llvm.org/D23090
llvm-svn: 277865
Summary: Thumb2 supports encoding immediates with specific patterns into mov.w by splatting the low 8 bits into other bytes.
Reviewers: john.brawn, jmolloy
Subscribers: jmolloy, aemerson, rengolin, samparker, llvm-commits
Differential Revision: https://reviews.llvm.org/D23090
llvm-svn: 277610
In this particular example we wouldn't want the smmls anyway (the value is
actually unused), but in general smmls does not provide the required flags
register so if that SUBE result is used we can't replace it.
llvm-svn: 277541
Retry r275776 (no changes, we suspect the issue was with another commit).
The current logic for handling inline asm operands in DAGToDAGISel interprets
the operands by looking for constants, which should represent the flags
describing the kind of operand we're dealing with (immediate, memory, register
def etc). The operands representing actual data are skipped only if they are
non-const, with the exception of immediate operands which are skipped explicitly
when a flag describing an immediate is found.
The oversight is that memory operands may be const too (e.g. for device drivers
reading a fixed address), so we should explicitly skip the operand following a
flag describing a memory operand. If we don't, we risk interpreting that
constant as a flag, which is definitely not intended.
Fixes PR26038
Differential Revision: https://reviews.llvm.org/D22103
llvm-svn: 276101
The current logic for handling inline asm operands in DAGToDAGISel interprets
the operands by looking for constants, which should represent the flags
describing the kind of operand we're dealing with (immediate, memory, register
def etc). The operands representing actual data are skipped only if they are
non-const, with the exception of immediate operands which are skipped explicitly
when a flag describing an immediate is found.
The oversight is that memory operands may be const too (e.g. for device drivers
reading a fixed address), so we should explicitly skip the operand following a
flag describing a memory operand. If we don't, we risk interpreting that
constant as a flag, which is definitely not intended.
Fixes PR26038
Differential Revision: https://reviews.llvm.org/D22103
llvm-svn: 275776
Thumb-1 doesn't have post-inc or pre-inc load or store instructions. However the LDM/STM instructions with writeback can function as post-inc load/store:
ldm r0!, {r1} @ load from r0 into r1 and increment r0 by 4
Obviously, this only works if the post increment is 4.
llvm-svn: 275540
This is a follow-up for r273544.
The end goal is to get rid of the isSwift / isCortexXY / isWhatever methods.
This commit also removes a command line flag that isn't used in any of the tests:
check-vmlx-hazards. It can be replaced easily with the mattr mechanism, since
this is now a subtarget feature.
There is still some work left regarding FeatureExpandMLx. In the past MLx
expansion was enabled for subtargets with hasVFP2(), until r129775 [1] switched
from that to isCortexA9, without too much justification.
In spite of that, the code performing MLx expansion still contains calls to
isSwift/isLikeA9, although the results of those are pretty clear given that
we're only enabling it for the A9.
We should try to enable it for all targets that have FeatureHasVMLxHazards, as
it seems to be closely related to that behaviour, and if that is possible try to
clean up the MLx expansion pass from all calls to isWhatever. This will require
some performance testing, so it will be done in another patch.
[1] http://lists.llvm.org/pipermail/llvm-commits/Week-of-Mon-20110418/119725.html
Differential Revision: http://reviews.llvm.org/D21798
llvm-svn: 274742
The important thing I was missing was ensuring newly added constants were kept in topological order. Repositioning the node is correct if the constant is newly added (so it has no topological ordering) but wrong if it already existed - positioning it next in the worklist would break the topological ordering.
Original commit message:
[Thumb] Select a BIC instead of AND if the immediate can be encoded more optimally negated
If an immediate is only used in an AND node, it is possible that the immediate can be more optimally materialized when negated. If this is the case, we can negate the immediate and use a BIC instead;
int i(int a) {
return a & 0xfffffeec;
}
Used to produce:
ldr r1, [CONSTPOOL]
ands r0, r1
CONSTPOOL: 0xfffffeec
And now produces:
movs r1, #255
adds r1, #20 ; Less costly immediate generation
bics r0, r1
llvm-svn: 274543
We were using DAG->getConstant instead of DAG->getTargetConstant. This meant that we could inadvertently increase the use count of a constant if stars aligned, which it did in this testcase. Increasing the use count of the constant could cause ISel to fall over (because DAGToDAG lowering assumed the constant had only one use!)
Original commit message:
[Thumb] Select a BIC instead of AND if the immediate can be encoded more optimally negated
If an immediate is only used in an AND node, it is possible that the immediate can be more optimally materialized when negated. If this is the case, we can negate the immediate and use a BIC instead;
int i(int a) {
return a & 0xfffffeec;
}
Used to produce:
ldr r1, [CONSTPOOL]
ands r0, r1
CONSTPOOL: 0xfffffeec
And now produces:
movs r1, #255
adds r1, #20 ; Less costly immediate generation
bics r0, r1
llvm-svn: 274510
TargetLowering and DAGToDAG are used to combine ADDC, ADDE and UMLAL
dags into UMAAL. Selection is split into the two phases because it
is easier to match the two patterns at those different times.
Differential Revision: http://http://reviews.llvm.org/D21461
llvm-svn: 273165
David Blaikie