Enhance LVI to analyze the ‘ashr’ binary operation. This leverages the infrastructure in ConstantRange for the ashr operation.
Patch by Surya Kumari Jangala!
Differential Revision: https://reviews.llvm.org/D40886
llvm-svn: 320983
When unsafe algerbra is allowed calls to cabs(r) can be replaced by:
sqrt(creal(r)*creal(r) + cimag(r)*cimag(r))
Patch by Paul Walker, thanks!
Differential Revision: https://reviews.llvm.org/D40069
llvm-svn: 320901
SROA analysis of InlineCost can figure out that some stores can be removed
after inlining and then the repeated loads clobbered by these stores are also
free. This patch finds these clobbered loads and adjust the inline cost
accordingly.
Differential Revision: https://reviews.llvm.org/D33946
llvm-svn: 320814
We cannot move the insertion point to header if SCEV contains div/rem
operations due to they may go over check for zero denominator.
Reviewers: sanjoy, mkazantsev, sebpop
Reviewed By: sebpop
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D41229
llvm-svn: 320789
Most of the -Wsign-compare warnings are due to the fact that
enums are signed by default in the MS ABI, while the
tautological comparison warnings trigger on x86 builds where
sizeof(size_t) is 4 bytes, so N > numeric_limits<unsigned>::max()
is always false.
Differential Revision: https://reviews.llvm.org/D41256
llvm-svn: 320750
Summary:
The function is meant to recurse until it comes upon the
phi it's looking for. However, with the current condition,
it will recurse until it finds anything _but_ the phi.
The function will even fail for simple cases like:
%i = phi i32 [ %inc, %loop ], ...
...
%inc = add i32 %i, 1
because the base condition will not happen when the phi
is recursed to, and the recursion will end with a 'false'
result since the previous instruction is a phi.
Reviewers: sanjoy, atrick
Reviewed By: sanjoy
Subscribers: Ka-Ka, bjope, llvm-commits
Committing on behalf of: Bevin Hansson (bevinh)
Differential Revision: https://reviews.llvm.org/D40946
llvm-svn: 320700
This patch fix this FIXME in visitPHI()
FIXME: We should potentially be tracking values through phi nodes,
especially when they collapse to a single value due to deleted CFG edges
during inlining.
Differential Revision: https://reviews.llvm.org/D38594
llvm-svn: 320699
D30041 extended SCEVPredicateRewriter to improve handling of Phi nodes whose
update chain involves casts; PSCEV can now build an AddRecurrence for some
forms of such phi nodes, under the proper runtime overflow test. This means
that we can identify such phi nodes as an induction, and the loop-vectorizer
can now vectorize such inductions, however inefficiently. The vectorizer
doesn't know that it can ignore the casts, and so it vectorizes them.
This patch records the casts in the InductionDescriptor, so that they could
be marked to be ignored for cost calculation (we use VecValuesToIgnore for
that) and ignored for vectorization/widening/scalarization (i.e. treated as
TriviallyDead).
In addition to marking all these casts to be ignored, we also need to make
sure that each cast is mapped to the right vector value in the vector loop body
(be it a widened, vectorized, or scalarized induction). So whenever an
induction phi is mapped to a vector value (during vectorization/widening/
scalarization), we also map the respective cast instruction (if exists) to that
vector value. (If the phi-update sequence of an induction involves more than one
cast, then the above mapping to vector value is relevant only for the last cast
of the sequence as we allow only the "last cast" to be used outside the
induction update chain itself).
This is the last step in addressing PR30654.
llvm-svn: 320672
Summary:
This patch tries to vectorize loads of consecutive memory accesses, accessed
in non-consecutive or jumbled way. An earlier attempt was made with patch D26905
which was reverted back due to some basic issue with representing the 'use mask' of
jumbled accesses.
This patch fixes the mask representation by recording the 'use mask' in the usertree entry.
Change-Id: I9fe7f5045f065d84c126fa307ef6ebe0787296df
Reviewers: mkuper, loladiro, Ayal, zvi, danielcdh
Reviewed By: Ayal
Subscribers: mgrang, dcaballe, hans, mzolotukhin
Differential Revision: https://reviews.llvm.org/D36130
llvm-svn: 320548
CreateAddRecFromPHIWithCastsImpl() adds an IncrementNUSW overflow predicate
which allows the PSCEV rewriter to rewrite this scev expression:
(zext i8 {0, + , (trunc i32 step to i8)} to i32)
into
{0, +, (sext i8 (trunc i32 step to i8) to i32)}
But then it adds the wrong Equal predicate:
%step == (zext i8 (trunc i32 %step to i8) to i32).
instead of:
%step == (sext i8 (trunc i32 %step to i8) to i32)
This is fixed here.
Differential Revision: https://reviews.llvm.org/D40641
llvm-svn: 320298
When the lowest bits of the operands to an integer multiply are known, the low bits of the result are deducible.
Code to deduce known-zero bottom bits already existed, but this change improves on that by deducing known-ones.
Patch by: Pedro Ferreira
Reviewers: craig.topper, sanjoy, efriedma
Differential Revision: https://reviews.llvm.org/D34029
llvm-svn: 320269
Summary:
This is LLVM instrumentation for the new HWASan tool. It is basically
a stripped down copy of ASan at this point, w/o stack or global
support. Instrumenation adds a global constructor + runtime callbacks
for every load and store.
HWASan comes with its own IR attribute.
A brief design document can be found in
clang/docs/HardwareAssistedAddressSanitizerDesign.rst (submitted earlier).
Reviewers: kcc, pcc, alekseyshl
Subscribers: srhines, mehdi_amini, mgorny, javed.absar, eraman, llvm-commits, hiraditya
Differential Revision: https://reviews.llvm.org/D40932
llvm-svn: 320217
Causes unexpected memory issue with New PM this time.
The new PM invalidates BPI but not BFI, leaving the
reference to BPI from BFI invalid.
Abandon this patch. There is a more general solution
which also handles runtime infinite loop (but not statically).
llvm-svn: 320180
In this method, we invoke `SimplifyICmpOperands` which takes the `Cond` predicate
by reference and may change it along with `LHS` and `RHS` SCEVs. But then we invoke
`computeShiftCompareExitLimit` with Values from which the SCEVs have been derived,
these Values have not been modified while `Cond` could be.
One of possible outcomes of this is that we may falsely prove that an infinite loop ends
within some finite number of iterations.
In this patch, we save the original `Cond` and pass it along with original operands.
This logic may be removed in future once `computeShiftCompareExitLimit` works
with SCEVs instead of value operands.
Reviewed By: sanjoy
Differential Revision: https://reviews.llvm.org/D40953
llvm-svn: 320142
Summary:
Make enum ModRefInfo an enum class. Changes to ModRefInfo values should
be done using inline wrappers.
This should prevent future bit-wise opearations from being added, which can be more error-prone.
Reviewers: sanjoy, dberlin, hfinkel, george.burgess.iv
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D40933
llvm-svn: 320107
Summary:
An undef extract index can be arbitrarily chosen to be an
out-of-range index value, which would result in the instruction being undef.
This change closes a gap identified while working on lowering vector permute intrinsics
with variable index vectors to pure LLVM IR.
Reviewers: arsenm, spatel, majnemer
Reviewed By: arsenm, spatel
Subscribers: fhahn, nhaehnle, wdng, llvm-commits
Differential Revision: https://reviews.llvm.org/D40231
llvm-svn: 319910
Lexicographical comparison of SCEV trees is potentially expensive for big
expression trees. We can define ordering between them for AddRecs and
N-ary operations by SCEV NoWrap flags to make non-equality check
cheaper.
This change does not prevent grouping eqivalent SCEVs together and is
not supposed to have any meaningful impact on behavior of any transforms.
Reviewed By: sanjoy
Differential Revision: https://reviews.llvm.org/D40645
llvm-svn: 319889
Current implementation of `compareSCEVComplexity` is being unreasonable with `SCEVUnknown`s:
every time it sees one, it creates a new value cache and tries to prove equality of two values using it.
This cache reallocates and gets lost from SCEV to SCEV.
This patch changes this behavior: now we create one cache for all values and share it between SCEVs.
Reviewed By: sanjoy
Differential Revision: https://reviews.llvm.org/D40597
llvm-svn: 319880
This caused PR35519.
> [memcpyopt] Teach memcpyopt to optimize across basic blocks
>
> This teaches memcpyopt to make a non-local memdep query when a local query
> indicates that the dependency is non-local. This notably allows it to
> eliminate many more llvm.memcpy calls in common Rust code, often by 20-30%.
>
> Fixes PR28958.
>
> Differential Revision: https://reviews.llvm.org/D38374
>
> [memcpyopt] Commit file missed in r319482.
>
> This change was meant to be included with r319482 but was accidentally
> omitted.
llvm-svn: 319873
Summary:
The aim is to make ModRefInfo checks and changes more intuitive
and less error prone using inline methods that abstract the bit operations.
Ideally ModRefInfo would become an enum class, but that change will require
a wider set of changes into FunctionModRefBehavior.
Reviewers: sanjoy, george.burgess.iv, dberlin, hfinkel
Subscribers: nlopes, llvm-commits
Differential Revision: https://reviews.llvm.org/D40749
llvm-svn: 319821
Summary:
I don't think rL309080 is the right fix for PR33494 -- caching ExitLimit only
hides the problem[0]. The real issue is that because of how we forget SCEV
expressions ScalarEvolution::getBackedgeTakenInfo, in the test case for PR33494
computing the backedge for any loop invalidates the trip count for every other
loop. This effectively makes the SCEV cache useless.
I've instead made the SCEV expression invalidation in
ScalarEvolution::getBackedgeTakenInfo less aggressive to fix this issue.
[0]: One way to think about this is that rL309080 essentially augmented the
backedge-taken-count cache with another equivalent exit-limit cache. The bug
went away because we were explicitly not clearing the exit-limit cache in
getBackedgeTakenInfo. But instead of doing all of that, we can just avoid
clearing the backedge-taken-count cache.
Reviewers: mkazantsev, mzolotukhin
Subscribers: mcrosier, llvm-commits
Differential Revision: https://reviews.llvm.org/D39361
llvm-svn: 319678
These are blocks that haven't not been executed during training. For large
projects this could make a significant difference. For the project, I was
looking at, I got an order of magnitude decrease in the size of the total YAML
files with this and r319235.
Differential Revision: https://reviews.llvm.org/D40678
Re-commit after fixing the failing testcase in rL319576, rL319577 and
rL319578.
llvm-svn: 319581
Summary:
Adding support for -print-module-scope similar to how it is
being done for function passes. This option causes loop-pass printer
to emit a whole-module IR instead of just a loop itself.
Reviewers: sanjoy, silvas, weimingz
Reviewed By: sanjoy
Subscribers: apilipenko, skatkov, llvm-commits
Differential Revision: https://reviews.llvm.org/D40247
llvm-svn: 319566
These are blocks that haven't not been executed during training. For large
projects this could make a significant difference. For the project, I was
looking at, I got an order of magnitude decrease in the size of the total YAML
files with this and r319235.
Differential Revision: https://reviews.llvm.org/D40678
llvm-svn: 319556
These command line options are not intended for public use, and often
don't even make sense in the context of a particular tool anyway. About
90% of them are already hidden, but when people add new options they
forget to hide them, so if you were to make a brand new tool today, link
against one of LLVM's libraries, and run tool -help you would get a
bunch of junk that doesn't make sense for the tool you're writing.
This patch hides these options. The real solution is to not have
libraries defining command line options, but that's a much larger effort
and not something I'm prepared to take on.
Differential Revision: https://reviews.llvm.org/D40674
llvm-svn: 319505
This teaches memcpyopt to make a non-local memdep query when a local query
indicates that the dependency is non-local. This notably allows it to
eliminate many more llvm.memcpy calls in common Rust code, often by 20-30%.
Fixes PR28958.
Differential Revision: https://reviews.llvm.org/D38374
llvm-svn: 319482
Currently, we use a set of pairs to cache responces like `CompareValueComplexity(X, Y) == 0`. If we had
proved that `CompareValueComplexity(S1, S2) == 0` and `CompareValueComplexity(S2, S3) == 0`,
this cache does not allow us to prove that `CompareValueComplexity(S1, S3)` is also `0`.
This patch replaces this set with `EquivalenceClasses` that merges Values into equivalence sets so that
any two values from the same set are equal from point of `CompareValueComplexity`. This, in particular,
allows us to prove the fact from example above.
Differential Revision: https://reviews.llvm.org/D40429
llvm-svn: 319153
Currently, we use a set of pairs to cache responces like `CompareSCEVComplexity(X, Y) == 0`. If we had
proved that `CompareSCEVComplexity(S1, S2) == 0` and `CompareSCEVComplexity(S2, S3) == 0`,
this cache does not allow us to prove that `CompareSCEVComplexity(S1, S3)` is also `0`.
This patch replaces this set with `EquivalenceClasses` any two values from the same set are equal from
point of `CompareSCEVComplexity`. This, in particular, allows us to prove the fact from example above.
Differential Revision: https://reviews.llvm.org/D40428
llvm-svn: 319149
Sean Fertile