Summary:
This extends TableGen's AsmMatcherEmitter with code that generates
a table with tied-operand constraints. The constraints are checked
when parsing the instruction. If an operand is not equal to its tied operand,
the assembler will give an error.
Patch [2/3] in a series to add operand constraint checks for SVE's predicated ADD/SUB.
Reviewers: olista01, rengolin, mcrosier, fhahn, craig.topper, evandro, echristo
Reviewed By: fhahn
Subscribers: javed.absar, llvm-commits
Differential Revision: https://reviews.llvm.org/D41446
llvm-svn: 322166
This patch resubmits the SVE ZIP1/ZIP2 patch series consisting of
of r320992, r320986, r320973, and r320970 by reverting
https://reviews.llvm.org/rL321024.
The issue that caused r321024 has been addressed in https://reviews.llvm.org/rL321158,
so this patch-series should be safe to resubmit.
llvm-svn: 321163
This reverts changes r320992, r320986, r320973, and r320970.
r320970 by itself breaks the test case, and the rest depend on it.
Test case will land soon.
llvm-svn: 321024
Summary: Patch [4/4] in a series to add parsing of predicates and properly parse SVE ZIP1/ZIP2 instructions. This patch further improves diagnostic messages for when the SVE feature is not specified.
Reviewers: rengolin, fhahn, olista01, echristo, efriedma
Reviewed By: fhahn
Subscribers: sdardis, aemerson, javed.absar, tschuett, llvm-commits, kristof.beyls
Differential Revision: https://reviews.llvm.org/D40363
llvm-svn: 320992
Summary:
When emitting a diagnostic for an invalid operand, a specific diagnostic
should only be reported when the instruction being matched is actually
enabled by the feature flags.
Patch [3/4] in a series to add parsing of predicates and properly parse SVE
ZIP1/ZIP2 instructions. This patch fixes bogus diagnostic messages for when
the SVE feature is not specified.
Reviewers: rengolin, craig.topper, olista01, sdardis, stoklund
Reviewed By: olista01, sdardis
Subscribers: fhahn, javed.absar, llvm-commits
Differential Revision: https://reviews.llvm.org/D40362
llvm-svn: 320986
Summary:
The generated diagnostic by the AsmMatcher isn't always applicable to the AsmOperand.
This is because the code will only update the diagnostic if it is more
specific than the previous diagnostic. However, when having validated
operands and 'moved on' to a next operand (for some instruction/alias for
which all previous operands are valid), if the diagnostic is InvalidOperand,
than that should be set as the diagnostic, not the more specific message
about a previous operand for some other instruction/alias candidate.
(Re-committed with an extra whitespace in SVEInstrFormats.td to trigger rebuild
of AArch64GenAsmMatcher.inc, since the llvm-clang-x86_64-expensive-checks-win
builder does not seem to rebuild AArch64GenAsmMatcher.inc with the
newly built TableGen due to a missing dependency somewhere (see:
http://lists.llvm.org/pipermail/llvm-dev/2017-December/119555.html))
Reviewers: craig.topper, olista01, rengolin, stoklund
Reviewed By: olista01
Subscribers: javed.absar, llvm-commits
Differential Revision: https://reviews.llvm.org/D40011
llvm-svn: 320711
A number of architectures re-use the same register names (e.g. for both 32-bit
FPRs and 64-bit FPRs). They are currently unable to use the tablegen'erated
MatchRegisterName and MatchRegisterAltName, as tablegen (when built with
asserts enabled) will fail.
When the AllowDuplicateRegisterNames in AsmParser is set, duplicated register
names will be tolerated. A backend can then coerce registers to the desired
register class by (for instance) implementing validateTargetOperandClass.
At least the in-tree Sparc backend could benefit from this, as does RISC-V
(single and double precision floating point registers).
Differential Revision: https://reviews.llvm.org/D39845
llvm-svn: 320018
This is causing a failure in the llvm-clang-x86_64-expensive-checks-win
buildbot, and I can't reproduce it locally, so reverting until I can work out
what is wrong.
llvm-svn: 319654
This adds a "invalid operands for instruction" diagnostic for
instructions where there is an instruction encoding with the correct
mnemonic and which is available for this target, but where multiple
operands do not match those which were provided. This makes it clear
that there is some combination of operands that is valid for the current
target, which the default diagnostic of "invalid instruction" does not.
Since this is a very general error, we only emit it if we don't have a
more specific error.
Differential revision: https://reviews.llvm.org/D36747
llvm-svn: 319649
- We can still emit this error if the actual instruction has two or more
operands missing compared to the expected one.
- We should only emit this error once per instruction.
Differential revision: https://reviews.llvm.org/D36746
llvm-svn: 318770
This is NFC, as the matcher would continue looping up to the maximum
number of operands with no effect, but this should improve performance a
bit, and makes the debug trace clearer.
Differential revision: https://reviews.llvm.org/D36744
llvm-svn: 318769
Summary:
The generated diagnostic by the AsmMatcher isn't always applicable to the AsmOperand.
This is because the code will only update the diagnostic if it is more specific than the previous diagnostic. However, when having validated operands and 'moved on' to a next operand (for some instruction/alias for which all previous operands are valid), if the diagnostic is InvalidOperand, than that should be set as the diagnostic, not the more specific message about a previous operand for some other instruction/alias candidate.
Reviewers: craig.topper, olista01, rengolin, stoklund
Reviewed By: olista01
Subscribers: javed.absar, llvm-commits
Differential Revision: https://reviews.llvm.org/D40011
llvm-svn: 318759
Summary:
Add LLVM_FORCE_ENABLE_DUMP cmake option, and use it along with
LLVM_ENABLE_ASSERTIONS to set LLVM_ENABLE_DUMP.
Remove NDEBUG and only use LLVM_ENABLE_DUMP to enable dump methods.
Move definition of LLVM_ENABLE_DUMP from config.h to llvm-config.h so
it'll be picked up by public headers.
Differential Revision: https://reviews.llvm.org/D38406
llvm-svn: 315590
This adds debug tracing to the table-generated assembly instruction matcher,
enabled by the -debug-only=asm-matcher option.
The changes in the target AsmParsers are to add an MCInstrInfo reference under
a consistent name, so that we can use it from table-generated code. This was
already being used this way for targets that use deprecation warnings, but 5
targets did not have it, and Hexagon had it under a different name to the other
backends.
llvm-svn: 315445
This allows a DiagnosticType and/or DiagnosticString to be associated
with a RegisterClass in tablegen, so that we can emit diagnostics in the
assembler when a register operand is incorrect.
DiagnosticType creates a predictable enum value, which gets returned as
the error code when an operand does not match, and can be used by the
assembly parser to map to a user-facing diagnostic. DiagnosticString
creates an anonymous enum value (currently based on the tablegen class
name), and a function to map from enum values to strings will be
generated. Both of these work the same was as they do for AsmOperand.
This isn't used by any targets yet, but has one (positive) side-effect.
It improves the diagnostic codes returned by validateOperandClass - we
always want to emit the diagnostic that relates to the expected operand
class, but this wasn't always being done when the expected and actual
classes were completely different (token/register/custom). This causes a
few AArch64 diagnostics to be improved, as Match_InvalidOperand was
being returned instead of a specific diagnostic type.
Differential revision: https://reviews.llvm.org/D36691
llvm-svn: 315295
This adds a DiagnosticString member to the AsmOperand tablegen class, so
that the diagnostic text to be used when an assembly operand is
incorrect can be stored in the tablegen description of the operand,
rather than in a separate switch statement in the AsmParser.
If DiagnosticString is used for any operands, tablegen will emit a
getMatchKindDiag function, to map from diagnostic enums to strings.
Differential revision: https://reviews.llvm.org/D31606
llvm-svn: 314803
The current table-generated assembly instruction matcher returns a
64-bit error code when matching fails. Since multiple instruction
encodings with the same mnemonic can fail for different reasons, it uses
some heuristics to decide which message is important.
This heuristic does not work well for targets that have many encodings
with the same mnemonic but different operands, or which have different
versions of instructions controlled by subtarget features, as it is hard
to know which encoding the user was intending to use.
Instead of trying to improve the heuristic in the table-generated
matcher, this patch changes it to report a list of near-miss encodings.
This list contains an entry for each encoding with the correct mnemonic,
but with exactly one thing preventing it from being valid. This thing
could be a single invalid operand, a missing target feature or a failed
target-specific validation function.
The target-specific assembly parser can then report an error message
giving multiple options for instruction variants that the user may have
been trying to use. For example, I am working on a patch to use this for
ARM, which can give this error for an invalid instruction for ARMv6-M:
<stdin>:8:3: error: invalid instruction, multiple near-miss encodings found
adds r0, r1, #0x8
^
<stdin>:8:3: note: for one encoding: instruction requires: thumb2
adds r0, r1, #0x8
^
<stdin>:8:16: note: for one encoding: expected an integer in range [0, 7]
adds r0, r1, #0x8
^
<stdin>:8:16: note: for one encoding: expected a register in range [r0, r7]
adds r0, r1, #0x8
^
This also allows the target-specific assembly parser to apply its own
heuristics to suppress some errors. For example, the error "instruction
requires: arm-mode" is never going to be useful when targeting an
M-profile architecture (which does not have ARM mode).
This patch just adds the target-independent mechanism for doing this,
all targets still use the old mechanism. I've added a bit in the
AsmParser tablegen class to allow targets to switch to this new
mechanism. To use this, the target-specific assembly parser will have to
be modified for the change in signature of MatchInstructionImpl, and to
report errors based on the list of near-misses.
Differential revision: https://reviews.llvm.org/D27620
llvm-svn: 314774
Relanding after fixing UB issue with DefaultOffsets.
Consider the following instruction: "inst.eq $dst, $src" where ".eq"
is an optional flag operand. The $src and $dst operands are
registers. If we parse the instruction "inst r0, r1", the flag is not
present and it will be marked in the "OptionalOperandsMask" variable.
After the matching is complete we call the "convertToMCInst" method.
The current implementation works only if the optional operands are at
the end of the array. The "Operands" array looks like [token:"inst",
reg:r0, reg:r1]. The first operand that must be added to the MCInst
is the destination, the r0 register. The "OpIdx" (in the Operands
array) for this register is 2. However, since the flag is not present
in the Operands, the actual index for r0 should be 1. The flag is not
present since we rely on the default value.
This patch removes the "NumDefaults" variable and replaces it with an
array (DefaultsOffset). This array contains an index for each operand
(excluding the mnemonic). At each index, the array contains the
number of optional operands that should be subtracted. For the
previous example, this array looks like this: [0, 1, 1]. When we need
to access the r0 register, we compute its index as 2 -
DefaultsOffset[1] = 1.
Patch by Alexandru Guduleasa!
Reviewers: SamWot, nhaustov, niravd
Reviewed By: niravd
Subscribers: vitalybuka, llvm-commits
Differential Revision: https://reviews.llvm.org/D35998
llvm-svn: 310254
Consider the following instruction: "inst.eq $dst, $src" where ".eq"
is an optional flag operand. The $src and $dst operands are
registers. If we parse the instruction "inst r0, r1", the flag is not
present and it will be marked in the "OptionalOperandsMask" variable.
After the matching is complete we call the "convertToMCInst" method.
The current implementation works only if the optional operands are at
the end of the array. The "Operands" array looks like [token:"inst",
reg:r0, reg:r1]. The first operand that must be added to the MCInst
is the destination, the r0 register. The "OpIdx" (in the Operands
array) for this register is 2. However, since the flag is not present
in the Operands, the actual index for r0 should be 1. The flag is not
present since we rely on the default value.
This patch removes the "NumDefaults" variable and replaces it with an
array (DefaultsOffset). This array contains an index for each operand
(excluding the mnemonic). At each index, the array contains the
number of optional operands that should be subtracted. For the
previous example, this array looks like this: [0, 1, 1]. When we need
to access the r0 register, we compute its index as 2 -
DefaultsOffset[1] = 1.
Patch by Alexandru Guduleasa!
Reviewers: SamWot, nhaustov, niravd
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D35998
llvm-svn: 309949
Some of our emitters were using the name of the Target to reference things that were created by others emitters using Namespace.
Apparently all targets have the same Target name as their instruction and register Namespace field?
Someone on IRC had a target that didn't do this and was getting build errors. This patch is a necessary, but maybe not sufficient fix.
llvm-svn: 307358
This implements suggesting other mnemonics when an invalid one is specified,
for example:
$ echo "adXd r1,r2,#3" | llvm-mc -triple arm
<stdin>:1:1: error: invalid instruction, did you mean: add, qadd?
adXd r1,r2,#3
^
The implementation is target agnostic, but as a first step I have added it only
to the ARM backend; so the ARM backend is a good example if someone wants to
enable this too for another target.
Differential Revision: https://reviews.llvm.org/D33128
llvm-svn: 307148
Internally both these methods just return the result of getValue on either a StringInit or a CodeInit object. In both cases this returns a StringRef pointing to a string allocated in the BumpPtrAllocator so its not going anywhere. So we can just pass that StringRef along.
This is a fairly naive patch that targets just the build failures caused by this change. There's additional work that can be done to avoid creating std::string at call sites that still think getValueAsString returns a std::string. I'll try to clean those up in future patches.
Differential Revision: https://reviews.llvm.org/D33710
llvm-svn: 304325
Summary:
The SelectionDAG importer now imports rules with Predicate's attached via
Requires, PredicateControl, etc. These predicates are implemented as
bitset's to allow multiple predicates to be tested together. However,
unlike the MC layer subtarget features, each target only pays for it's own
predicates (e.g. AArch64 doesn't have 192 feature bits just because X86
needs a lot).
Both AArch64 and X86 derive at least one predicate from the MachineFunction
or Function so they must re-initialize AvailableFeatures before each
function. They also declare locals in <Target>InstructionSelector so that
computeAvailableFeatures() can use the code from SelectionDAG without
modification.
Reviewers: rovka, qcolombet, aditya_nandakumar, t.p.northover, ab
Reviewed By: rovka
Subscribers: aemerson, rengolin, dberris, kristof.beyls, llvm-commits, igorb
Differential Revision: https://reviews.llvm.org/D31418
llvm-svn: 300993
It's causing llvm-clang-x86_64-expensive-checks-win to fail to compile and I
haven't worked out why. Reverting to make it green while I figure it out.
llvm-svn: 300978
Summary:
The SelectionDAG importer now imports rules with Predicate's attached via
Requires, PredicateControl, etc. These predicates are implemented as
bitset's to allow multiple predicates to be tested together. However,
unlike the MC layer subtarget features, each target only pays for it's own
predicates (e.g. AArch64 doesn't have 192 feature bits just because X86
needs a lot).
Both AArch64 and X86 derive at least one predicate from the MachineFunction
or Function so they must re-initialize AvailableFeatures before each
function. They also declare locals in <Target>InstructionSelector so that
computeAvailableFeatures() can use the code from SelectionDAG without
modification.
Reviewers: rovka, qcolombet, aditya_nandakumar, t.p.northover, ab
Reviewed By: rovka
Subscribers: aemerson, rengolin, dberris, kristof.beyls, llvm-commits, igorb
Differential Revision: https://reviews.llvm.org/D31418
llvm-svn: 300964
Summary:
The categories are emitted in a strange order in this patch due to a bug in the
CommandLine library.
Reviewers: ab
Reviewed By: ab
Subscribers: ab, llvm-commits
Differential Revision: https://reviews.llvm.org/D30995
llvm-svn: 298843
Summary:
The Mips target is the only user of mnemonicIsValid. This patch
moves this method from AsmMatcherEmitter.cpp to MipsAsmParser.cpp,
getting rid of the method in all other targets where it generated
warnings about an unused function.
Patch by Gonsolo.
Reviewers: craig.topper
Reviewed By: craig.topper
Subscribers: sdardis
Differential Revision: https://reviews.llvm.org/D28748
llvm-svn: 294400
clang -target arm deprecated-asm.s -c
deprecated-asm.s:30:9: warning: use of SP or PC in the list is deprecated
stmia r4!, {r12-r14}
We have to have an option what can disable it.
Patched by Yin Ma!
Reviewers: joey, echristo, weimingz
Subscribers: llvm-commits, aemerson
Differential Revision: https://reviews.llvm.org/D27219
llvm-svn: 288734
Bring the sorting check back that I removed in r288655 but put it under
EXPENSIVE_CHECKS this time. Also document that this the check isn't
purely about having a sorted list but also about operator < having the
correct transitive behavior.
Apply the same to the other check in the file.
llvm-svn: 288693
A debug build of AsmMatcherEmitter would use a quadratic algorithm to
check whether std::stable_sort() actually sorted. Let's hope the authors
of our C++ standard library did that testing for us. Removing the check
gives a 3x speedup in the X86 case.
llvm-svn: 288655
Summary:
* ARM is omitted from this patch because this check appears to expose bugs in this target.
* Mips is omitted from this patch because this check either detects bugs or deliberate
emission of instructions that don't satisfy their predicates. One deliberate
use is the SYNC instruction where the version with an operand is correctly
defined as requiring MIPS32 while the version without an operand is defined
as an alias of 'SYNC 0' and requires MIPS2.
* X86 is omitted from this patch because it doesn't use the tablegen-erated
MCCodeEmitter infrastructure.
Patches for ARM and Mips will follow.
Depends on D25617
Reviewers: tstellarAMD, jmolloy
Subscribers: wdng, jmolloy, aemerson, rengolin, arsenm, jyknight, nemanjai, nhaehnle, tstellarAMD, llvm-commits
Differential Revision: https://reviews.llvm.org/D25618
llvm-svn: 287439
Summary:
This change is preparation for a change that will allow targets to verify that the instructions
they emit meet the predicates they specify. This is useful to ensure that C++
legalization/lowering/instruction-selection doesn't incorrectly select code for a different
subtarget than intended. Such cases are not caught by the integrated assembler when emitting
instructions directly to an object file.
Reviewers: qcolombet
Subscribers: qcolombet, beanz, mgorny, llvm-commits, modocache
Differential Revision: https://reviews.llvm.org/D25614
llvm-svn: 286945
As it stands, the OperandMatchResultTy is only included in the generated
header if there is custom operand parsing. However, almost all backends
make use of MatchOperand_Success and friends from OperandMatchResultTy for
e.g. parseRegister. This is a pain when starting an AsmParser for a new
backend that doesn't yet have custom operand parsing. Move the enum to
MCTargetAsmParser.h.
This patch is a prerequisite for D23563
Differential Revision: https://reviews.llvm.org/D23496
llvm-svn: 285705
Summary:
SetVector already used DenseSet, but SmallSetVector used std::set. This
leads to surprising performance differences. Moreover, it means that
the set of key types accepted by SetVector and SmallSetVector are
quite different!
In order to make this change, we had to convert some callsites that used
SmallSetVector<std::string, N> to use SmallSetVector<CachedHashString, N>
instead.
Reviewers: timshen
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D25648
llvm-svn: 284887
Summary:
This allows specifying instructions that are available only in specific assembler variant. If AsmVariantName is specified then instruction will be presented only in MatchTable for this variant. If not specified then assembler variants will be determined based on AsmString.
Also this allows splitting assembler match tables in same way as it is done in dissasembler.
Reviewers: ab, tstellarAMD, craig.topper, vpykhtin
Subscribers: wdng
Differential Revision: https://reviews.llvm.org/D24249
llvm-svn: 280952
Sander de Smalen