We were only checking the element count, but not the total width. This could cause illegal bitcasts to be created if for example the output was 512-bits, but N1 is 256 bits, and the extraction size was 128-bits.
Fixes PR36199
Differential Revision: https://reviews.llvm.org/D42809
llvm-svn: 324002
Until we support extending loads properly we're going to fall back for these.
We already handle stores in the same way, so this is just being consistent.
llvm-svn: 324001
Summary:
This change extends MachineCopyPropagation to do COPY source forwarding
and adds an additional run of the pass to the default pass pipeline just
after register allocation.
This version of this patch uses the newly added
MachineOperand::isRenamable bit to avoid forwarding registers is such a
way as to violate constraints that aren't captured in the
Machine IR (e.g. ABI or ISA constraints).
This change is a continuation of the work started in D30751.
Reviewers: qcolombet, javed.absar, MatzeB, jonpa, tstellar
Subscribers: tpr, mgorny, mcrosier, nhaehnle, nemanjai, jyknight, hfinkel, arsenm, inouehrs, eraman, sdardis, guyblank, fedor.sergeev, aheejin, dschuff, jfb, myatsina, llvm-commits
Differential Revision: https://reviews.llvm.org/D41835
llvm-svn: 323991
This allows us to use PSHUFB for v8i16/v4i32 and VPERMD/PERMPS for v4i64/v4f64 variable shuffles.
Differential Revision: https://reviews.llvm.org/D42487
llvm-svn: 323987
Summary:
EmitTest sometimes creates X86ISD::AND specifically to hide the AND from DAG combine. But this prevents isel patterns that look for (cmp (and X, Y), 0) from being able to see it. So we end up with an AND and a TEST. The TEST gets removed by compare instruction optimization during the peephole pass.
This patch attempts to fix this by converting X86ISD::AND with no flag users back into ISD::AND during the DAG preprocessing just before isel.
In order to do this correctly I had to make the X86ISD::AND node created by EmitTest in this case really have a flag output. Which arguably it should have had anyway so that the number of operands would be consistent for the opcode in all cases. Then I had to modify the ReplaceAllUsesWith to understand that we might be looking at an instruction with 2 outputs. Though in this case there are no uses to replace since we just created the node, but that's what the code did before so I just made it keep working.
Reviewers: spatel, RKSimon, niravd, deadalnix
Reviewed By: RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D42764
llvm-svn: 323982
As shown in the example in PR34994:
https://bugs.llvm.org/show_bug.cgi?id=34994
...we can return a very wrong answer (inf instead of 0.0) for square root when
using a reciprocal square root estimate instruction.
Here, I've conditionalized the filtering out of denorms based on the function
having "denormal-fp-math"="ieee" in its attributes. The other options for this
attribute are 'preserve-sign' and 'positive-zero'.
So we don't generate this extra code by default with just '-ffast-math' (because
then there's no denormal attribute string at all), but it works if you specify
'-ffast-math -fdenormal-fp-math=ieee' from clang.
As noted in the review, there may be other problems in clang that affect the
results depending on platform (Linux x86 at least), but this should allow
creating the desired codegen.
Differential Revision: https://reviews.llvm.org/D42323
llvm-svn: 323981
Summary:
In Instruction Selection UpdateChains replaces all matched Nodes'
chain references including interior token factors and deletes them.
This may allow nodes which depend on these interior nodes but are not
part of the set of matched nodes to be left with a dangling dependence.
Avoid this by doing the replacement for matched non-TokenFactor nodes.
Fixes PR36164.
Reviewers: jonpa, RKSimon, bogner
Subscribers: llvm-commits, hiraditya
Differential Revision: https://reviews.llvm.org/D42754
llvm-svn: 323977
Commit r323512 introduced an optimisation in LowerReturn for half-precision
return values. A missing check caused a crash when the return value is "undef"
(i.e. a node that has no operands).
Differential Revision: https://reviews.llvm.org/D42743
llvm-svn: 323968
This patch includes EVA instructions in the Std2MicroMips mapping
tables, which is required for direct object emission.
Differential Revision: https://reviews.llvm.org/D41771
llvm-svn: 323958
Discussed here:
http://lists.llvm.org/pipermail/llvm-dev/2018-January/120320.html
In preparation for adding support for named vregs we are changing the sigil for
physical registers in MIR to '$' from '%'. This will prevent name clashes of
named physical register with named vregs.
llvm-svn: 323922
Summary:
This removes the need for a machine module pass using some deeply
questionable hacks. This should address PR36123 which is a case where in
full LTO the memory usage of a machine module pass actually ended up
being significant.
We should revert this on trunk as soon as we understand and fix the
memory usage issue, but we should include this in any backports of
retpolines themselves.
Reviewers: echristo, MatzeB
Subscribers: sanjoy, mcrosier, mehdi_amini, hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D42726
llvm-svn: 323915
Summary:
Call MRI.freezeReservedRegs() on functions created during outlining so
that calls to isReserved() by the verifier called after this pass won't
assert.
Reviewers: MatzeB, qcolombet, paquette
Subscribers: mcrosier, javed.absar, llvm-commits
Differential Revision: https://reviews.llvm.org/D42749
llvm-svn: 323905
Summary:
This was introduced in D42646 but ended up being reverted because the original implementation was buggy.
Depends on D42646
Reviewers: craig.topper, niravd, spatel, hfinkel
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D42741
llvm-svn: 323899
Since r322087, glibc's finite lib calls are generated when possible.
However, they are not supported on Android. This change also
disables other functions not available on Android.
Differential Revision: http://reviews.llvm.org/D42668
llvm-svn: 323898
Summary:
It seems it's main effect is to create addition copies when values are inr register that do not support this trick, which increase register pressure and makes the code bigger.
Reviewers: craig.topper, niravd, spatel, hfinkel
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D42646
llvm-svn: 323888
Selecting of constant HVX vectors involves some "manual processing",
which mishandled an unrelated BITCAST operation causing a selection
error.
llvm-svn: 323887
This commit came as a result for revert of patch r317579 (originally
committed as r317100). The patch made CFI instructions duplicable, because
their existence in the epilogue block was affecting the Tail duplication
pass. However, duplicating blocks with CFI instructions was an issue for
compact unwind info on Darwin, which is why the patch was reverted.
This patch allows duplicating tails with CFI instructions, though they are
not duplicable, by copying them 'manually'.
Patch by Djordje Kovacevic.
Differential Revision: https://reviews.llvm.org/D40979
llvm-svn: 323883
Summary:
Instruction Selection preserves relative orders of all nodes save
TokenFactors which we treat specially. As a result Node Ids for
TokenFactors may violate the topological ordering and should not be
considered as valid pruning candidates in predecessor search.
Fixes PR35316.
Reviewers: RKSimon, hfinkel
Subscribers: hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D42701
llvm-svn: 323880
In D41587, @mssimpso discovered that the order of some patterns for
AArch64 was sub-optimal. I thought a bit about how we could avoid that
case in the future. I do not think there is a need for evaluating all
patterns for now. But this patch adds an extra (expensive) check, that
evaluates the latencies of all patterns, and ensures that the latency
saved decreases for subsequent patterns.
This catches the sub-optimal order fixed in D41587, but I am not
entirely happy with the check, as it only applies to sub-optimal
patterns seen while building with EXPENSIVE_CHECKS on. It did not
discover any other sub-optimal pattern ordering.
Reviewers: Gerolf, spatel, mssimpso
Reviewed By: Gerolf, mssimpso
Differential Revision: https://reviews.llvm.org/D41766
llvm-svn: 323873
When selecting a split candidate for region splitting, the register allocator tries to predict which candidate will have the cheapest spill cost.
Global splitting may cause the creation of local intervals, and they might spill.
This patch makes RA take into account the spill cost of local split intervals in use blocks (we already take into account the spill cost in through blocks).
A flag ("-condsider-local-interval-cost") controls weather we do this advanced cost calculation (it's on by default for X86 target, off for the rest).
Differential Revision: https://reviews.llvm.org/D41585
Change-Id: Icccb8ad2dbf13124f5d97a18c67d95aa6be0d14d
llvm-svn: 323870
Summary:
Expressions of the form x < 0 ? 0 : x; and x < -1 ? -1 : x can be lowered using bit-operations instead of branching or conditional moves
In thumb-mode this results in a two-instruction sequence, a shift followed by a bic or or while in ARM/thumb2 mode that has flexible second operand the shift can be folded into a single bic/or instructions. In most cases this results in smaller code and possibly less branches, and in no case larger than before.
Patch by Marten Svanfeldt.
Reviewers: fhahn, pbarrio
Reviewed By: pbarrio
Subscribers: efriedma, rogfer01, aemerson, javed.absar, kristof.beyls, llvm-commits
Differential Revision: https://reviews.llvm.org/D42574
llvm-svn: 323869
Since these methods will assert if the integer does not fit into 64 bits,
it is necessary to do this check before calling them in
supportedAddressingMode().
Review: Ulrich Weigand.
llvm-svn: 323866
Half-precision arguments and return values are passed as if it were an int or
float for ARM. This results in truncates and bitcasts to/from i16 and f16
values, which are legalized very early to stack stores/loads. When FullFP16 is
enabled, we want to avoid codegen for these bitcasts as it is unnecessary and
inefficient.
Differential Revision: https://reviews.llvm.org/D42580
llvm-svn: 323861
Enable multiple COPY hints to eliminate more COPYs during register allocation.
Note that this is something all targets should do, see
https://reviews.llvm.org/D38128.
Review: Nemanja Ivanovic
llvm-svn: 323858
In Thumb 1, with the new ADDCARRY / SUBCARRY the scheduler may need to do
copies CPSR ↔ GPR but not all Thumb1 targets implement them.
The schedule can attempt, before attempting a copy, to clone the instructions
but it does not currently do that for nodes with input glue. In this patch we
introduce a target-hook to let the hook decide if a glued machinenode is still
eligible for copying. In this case these are ARM::tADCS and ARM::tSBCS .
As a follow-up of this change we should actually implement the copies for the
Thumb1 targets that do implement them and restrict the hook to the targets that
can't really do such copy as these clones are not ideal.
This change fixes PR35836.
Differential Revision: https://reviews.llvm.org/D42051
llvm-svn: 323857
Sometimes users do not specify data layout in LLVM assembly and let llc set the
data layout by target triple after loading the LLVM assembly.
Currently the parser checks alloca address space no matter whether the LLVM
assembly contains data layout definition, which causes false alarm since the
default data layout does not contain the correct alloca address space.
The parser also calls verifier to check debug info and updating invalid debug
info. Currently there is no way to let the verifier to check debug info only.
If the verifier finds non-debug-info issues the parser will fail.
For llc, the fix is to remove the check of alloca addr space in the parser and
disable updating debug info, and defer the updating of debug info and
verification to be after setting data layout of the IR by target.
For other llvm tools, since they do not override data layout by target but
instead can override data layout by a command line option, an argument for
overriding data layout is added to the parser. In cases where data layout
overriding is necessary for the parser, the data layout can be provided by
command line.
Differential Revision: https://reviews.llvm.org/D41832
llvm-svn: 323826
Instructions like memd(r0+##global+1) are legal as long as the entire
address is properly aligned. Assuming that "global" is aligned at an
8-byte boundary, the expression "global+1" appears to be misaligned.
Handle such cases in HexagonConstExtenders, and make sure that any non-
extended offsets generated are still aligned accordingly.
llvm-svn: 323799
This reverts r323562, since it wasn't actually necessary. Constant-
extended offsets do not need to be aligned, as long as the effective
address is aligned.
Keep the testcase, with a modification which checks that such offsets
are not unnecessarily avoided.
llvm-svn: 323798
Mark more opcodes as hasExtraSrcRegAllocReq so that their operands will
be marked as not renamable, to avoid copy forwarding violating the
constraint that only one operand may use the constant bus.
These changes fix a few mis-compiles when copy forwarding is enabled in
MachineCopyPropagation by D41835 (and were reviewed as part of that change).
llvm-svn: 323794
Craig Topper