This reverts commit r225000, r225021, r225083, r225086, r225090.
The root change (r225000) still has several issues where it's caused
calls to be emitted without debug locations. This causes assertion
failures if/when those calls are inlined.
I'll work up some test cases and fixes before recommitting this.
llvm-svn: 225555
Originally committed in r224385 and reverted in r224441 due to concerns
this change might've introduced a crash. Turns out this change fixes the
crash introduced by one of my earlier more specific location handling
changes (those specific fixes are reverted by this patch, in favor of
the more general solution).
Recommitted in r224941 and reverted in r224970 after it caused a crash
when building compiler-rt. Looks to be due to this change zeroing out
the debug location when emitting default arguments (which were meant to
inherit their outer expression's location) thus creating call
instructions without locations - these create problems for inlining and
must not be created. That is fixed and tested in this version of the
change.
Original commit message:
This is a more scalable (fixed in mostly one place, rather than many
places that will need constant improvement/maintenance) solution to
several commits I've made recently to increase source fidelity for
subexpressions.
This resetting had to be done at the DebugLoc level (not the
SourceLocation level) to preserve scoping information (if the resetting
was done with CGDebugInfo::EmitLocation, it would've caused the tail end
of an expression's codegen to end up in a potentially different scope
than the start, even though it was at the same source location). The
drawback to this is that it might leave CGDebugInfo out of sync. Ideally
CGDebugInfo shouldn't have a duplicate sense of the current
SourceLocation, but for now it seems it does... - I don't think I'm
going to tackle removing that just now.
I expect this'll probably cause some more buildbot fallout & I'll
investigate that as it comes up.
Also these sort of improvements might be starting to show a weakness/bug
in LLVM's line table handling: we don't correctly emit is_stmt for
statements, we just put it on every line table entry. This means one
statement split over multiple lines appears as multiple 'statements' and
two statements on one line (without column info) are treated as one
statement.
I don't think we have any IR representation of statements that would
help us distinguish these cases and identify the beginning of each
statement - so that might be something we need to add (possibly to the
lexical scope chain - a scope for each statement). This does cause some
problems for GDB and possibly other DWARF consumers.
llvm-svn: 225000
Originally committed in r224385 and reverted in r224441 due to concerns
this change might've introduced a crash. Turns out this change fixes the
crash introduced by one of my earlier more specific location handling
changes (those specific fixes are reverted by this patch, in favor of
the more general solution).
Original commit message:
This is a more scalable (fixed in mostly one place, rather than many
places that will need constant improvement/maintenance) solution to
several commits I've made recently to increase source fidelity for
subexpressions.
This resetting had to be done at the DebugLoc level (not the
SourceLocation level) to preserve scoping information (if the resetting
was done with CGDebugInfo::EmitLocation, it would've caused the tail end
of an expression's codegen to end up in a potentially different scope
than the start, even though it was at the same source location). The
drawback to this is that it might leave CGDebugInfo out of sync. Ideally
CGDebugInfo shouldn't have a duplicate sense of the current
SourceLocation, but for now it seems it does... - I don't think I'm
going to tackle removing that just now.
I expect this'll probably cause some more buildbot fallout & I'll
investigate that as it comes up.
Also these sort of improvements might be starting to show a weakness/bug
in LLVM's line table handling: we don't correctly emit is_stmt for
statements, we just put it on every line table entry. This means one
statement split over multiple lines appears as multiple 'statements' and
two statements on one line (without column info) are treated as one
statement.
I don't think we have any IR representation of statements that would
help us distinguish these cases and identify the beginning of each
statement - so that might be something we need to add (possibly to the
lexical scope chain - a scope for each statement). This does cause some
problems for GDB and possibly other DWARF consumers.
llvm-svn: 224941
This is a more scalable (fixed in mostly one place, rather than many
places that will need constant improvement/maintenance) solution to
several commits I've made recently to increase source fidelity for
subexpressions.
This resetting had to be done at the DebugLoc level (not the
SourceLocation level) to preserve scoping information (if the resetting
was done with CGDebugInfo::EmitLocation, it would've caused the tail end
of an expression's codegen to end up in a potentially different scope
than the start, even though it was at the same source location). The
drawback to this is that it might leave CGDebugInfo out of sync. Ideally
CGDebugInfo shouldn't have a duplicate sense of the current
SourceLocation, but for now it seems it does... - I don't think I'm
going to tackle removing that just now.
I expect this'll probably cause some more buildbot fallout & I'll
investigate that as it comes up.
Also these sort of improvements might be starting to show a weakness/bug
in LLVM's line table handling: we don't correctly emit is_stmt for
statements, we just put it on every line table entry. This means one
statement split over multiple lines appears as multiple 'statements' and
two statements on one line (without column info) are treated as one
statement.
I don't think we have any IR representation of statements that would
help us distinguish these cases and identify the beginning of each
statement - so that might be something we need to add (possibly to the
lexical scope chain - a scope for each statement). This does cause some
problems for GDB and possibly other DWARF consumers.
llvm-svn: 224385
Currently, if global variable is marked as a private OpenMP variable, the compiler crashes in debug version or generates incorrect code in release version. It happens because in the OpenMP region the original global variable is used instead of the generated private copy. It happens because currently globals variables are not captured in the OpenMP region.
This patch adds capturing of global variables iff private copy of the global variable must be used in the OpenMP region.
Differential Revision: http://reviews.llvm.org/D6259
llvm-svn: 224323
the simplest case, which is used when no chunk_size is specified in
the schedule(static) or no 'schedule' clause is specified - the
iteration space is divided by the library into chunks that are
approximately equal in size, and at most one chunk is distributed
to each thread. In this case, we do not need an outer loop in each
thread - each thread requests once which iterations range it should
handle (using __kmpc_for_static_init runtime call) and then runs the
inner loop on this range.
Differential Revision: http://reviews.llvm.org/D5865
llvm-svn: 224233
Adds generation of call to "i32 kmpc_cancel_barrier(ident_t *, i32)" libcall for explicitly specified barriers (OMP_IDENT_BARRIER_EXPL flag is added to "flags" field of "ident_t" structure).
Also this patch replaces all calls to "kmpc_barrier" function by calls of "__kmpc_cancel_barrier" function which provides additional functionality for OpenMP 4.0.
Also, library specific enum OpenMPLocationFlags moved to private section of CGOpenMPRuntime class to make it more independent from library implementation.
Differential Revision: http://reviews.llvm.org/D6447
llvm-svn: 223444
For each "omp flush" directive a call to "void kmpc_flush(ident_t *, ...)" function is generated.
Directive "omp flush" may have an associated list of variables to flush, but currently runtime function ignores them. So the patch generates just "call kmpc_flush(ident_t *<loc>, i32 0)".
Differential Revision: http://reviews.llvm.org/D6292
llvm-svn: 222409
This patch generates some helper variables which used as a private copies of the corresponding original variables inside an OpenMP 'parallel' directive. These generated variables are initialized by default (with the default constructor, if any). In outlined function references to original variables are replaced by the references to these private helper variables. At the end of the initialization of the private variables and implicit barier is set by calling __kmpc_barrier(...) runtime function to be sure that all threads were initialized using original values of the variables.
Differential Revision: http://reviews.llvm.org/D4752
llvm-svn: 220262
This patch generates call to "kmpc_push_num_threads(ident_t *loc, kmp_int32 global_tid, kmp_int32 num_threads);" library function before calling "kmpc_fork_call" each time there is an associated "num_threads" clause in the "omp parallel" directive.
Differential Revision: http://reviews.llvm.org/D5145
llvm-svn: 219599
Adds codegen for 'if' clause. Currently only for 'if' clause used with the 'parallel' directive.
If condition evaluates to true, the code executes parallel version of the code by calling __kmpc_fork_call(loc, 1, microtask, captured_struct/*context*/), where loc - debug location, 1 - number of additional parameters after "microtask" argument, microtask - is outlined finction for the code associated with the 'parallel' directive, captured_struct - list of variables captured in this outlined function.
If condition evaluates to false, the code executes serial version of the code by executing the following code:
global_thread_id.addr = alloca i32
store i32 global_thread_id, global_thread_id.addr
zero.addr = alloca i32
store i32 0, zero.addr
kmpc_serialized_parallel(loc, global_thread_id);
microtask(global_thread_id.addr, zero.addr, captured_struct/*context*/);
kmpc_end_serialized_parallel(loc, global_thread_id);
Where loc - debug location, global_thread_id - global thread id, returned by __kmpc_global_thread_num() call or passed as a first parameter in microtask() call, global_thread_id.addr - address of the variable, where stored global_thread_id value, zero.addr - implicit bound thread id (should be set to 0 for serial call), microtask() and captured_struct are the same as in parallel call.
Also this patch checks if the condition is constant and if it is constant it evaluates its value and then generates either parallel version of the code (if the condition evaluates to true), or the serial version of the code (if the condition evaluates to false).
Differential Revision: http://reviews.llvm.org/D4716
llvm-svn: 219597
Moved CGOpenMPRegionInfo from CGOpenMPRuntime.h to CGOpenMPRuntime.cpp file and reworked the code for this change. Also added processing of ThreadID variable passed as an argument in outlined functions in parallel and task directives.
llvm-svn: 219490
This patch makes class OMPPrivateScope a common class for all private variables. Reworked processing of firstprivate variables (now it is based on OMPPrivateScope too).
llvm-svn: 219486
Includes parsing and semantic analysis for 'omp teams' directive support from OpenMP 4.0. Adds additional analysis to 'omp target' directive with 'omp teams' directive.
llvm-svn: 219385
This patch generates some helper variables that used as private copies of the corresponding original variables inside an OpenMP 'parallel' directive. These generated variables are initialized by copy using values of the original variables (with the copy constructor, if any). For arrays, initializator is generated for single element and in the codegen procedure this initial value is automatically propagated between all elements of the private copy.
In outlined function, references to original variables are replaced by the references to these private helper variables. At the end of the initialization of the private variables an implicit barier is generated by calling __kmpc_barrier(...) runtime function to be sure that all threads were initialized using original values of the variables.
Differential Revision: http://reviews.llvm.org/D5140
llvm-svn: 219306
This patch generates some helper variables that used as private copies of the corresponding original variables inside an OpenMP 'parallel' directive. These generated variables are initialized by copy using values of the original variables (with the copy constructor, if any). For arrays, initializator is generated for single element and in the codegen procedure this initial value is automatically propagated between all elements of the private copy.
In outlined function, references to original variables are replaced by the references to these private helper variables. At the end of the initialization of the private variables an implicit barier is generated by calling __kmpc_barrier(...) runtime function to be sure that all threads were initialized using original values of the variables.
Differential Revision: http://reviews.llvm.org/D5140
llvm-svn: 219297
This patch generates some helper variables that used as private copies of the corresponding original variables inside an OpenMP 'parallel' directive. These generated variables are initialized by copy using values of the original variables (with the copy constructor, if any). For arrays, initializator is generated for single element and in the codegen procedure this initial value is automatically propagated between all elements of the private copy.
In outlined function, references to original variables are replaced by the references to these private helper variables. At the end of the initialization of the private variables an implicit barier is generated by calling __kmpc_barrier(...) runtime function to be sure that all threads were initialized using original values of the variables.
Differential Revision: http://reviews.llvm.org/D5140
llvm-svn: 219295
Includes parsing and semantic analysis for 'omp teams' directive support from OpenMP 4.0. Adds additional analysis to 'omp target' directive with 'omp teams' directive.
llvm-svn: 219197
No functional changes intended.
Renamed EmitOMPSimdLoop to EmitOMPInnerLoop, I plan to re-use
it to emit inner loop in the future patches for CodeGen of the
worksharing loop directives (omp for, omp for simd).
llvm-svn: 219195
This patch implements collapsing of the loops (in particular, in
presense of clause 'collapse'). It calculates number of iterations N
and expressions nesessary to calculate the nested loops counters
values based on new iteration variable (that goes from 0 to N-1)
in Sema. It also adds Codegen for 'omp simd', which uses
(and tests) this feature.
Differential Revision: http://reviews.llvm.org/D5184
llvm-svn: 218743
This patch adds codegen for constructs:
#pragma omp critical [name]
<body>
It generates global variable ".gomp_critical_user_[name].var" of type int32[8]. Then it generates library call "kmpc_critical(loc, gtid, .gomp_critical_user_[name].var)", code for <body> statement and final call "kmpc_end_critical(loc, gtid, .gomp_critical_user_[name].var)".
Differential Revision: http://reviews.llvm.org/D5202
llvm-svn: 218239
This reverts commit r211096. Looks like it broke the msvc build:
SemaOpenMP.cpp(140) : error C4519: default template arguments are only allowed on a class template
llvm-svn: 211113
David Blaikie