This change squelches the warning for a cast from fixed to fixed point
conversions when -Wbad-function-cast is enabled.
Fixes:
cast from function call of type '_Fract' to non-matching type '_Fract'
[-Wbad-function-cast]
Reviewed By: bjope
Differential Revision: https://reviews.llvm.org/D85157
Vectors of bfloat are a storage format only; you're supposed to
explicitly convert them to a wider type to do arithmetic on them.
But currently, if you write something like
bfloat16x4_t test(bfloat16x4_t a, bfloat16x4_t b) { return a + b; }
then the clang frontend accepts it without error, and (ARM or AArch64)
isel fails to generate code for it.
Added a rule in Sema that forbids the attempt from even being made,
and tests that check it. In particular, we also outlaw arithmetic
between vectors of bfloat and any other vector type.
Patch by Luke Cheeseman.
Reviewed By: LukeGeeson
Differential Revision: https://reviews.llvm.org/D85009
This patch implements the function prototypes vec_extractl and vec_extracth in altivec.h to utilize the vector extract double element instructions introduced in Power10.
Differential Revision: https://reviews.llvm.org/D84622
This warning diagnoses cases where an expression is compared to a
constant, and the comparison is tautological due to the form of the
expression (but not merely due to its type). This applies in cases such
as comparisons of bit-fields and the result of bit-masks.
The new warning is added to the Clang diagnostic group
-Wtautological-constant-in-range-compare but not to the
formerly-equivalent GCC-compatibility diagnostic group -Wtype-limits,
which retains its old meaning of diagnosing only tautological
comparisons to extremal values of a type (eg, int > INT_MAX).
Reviewed By: rtrieu
Differential Revision: https://reviews.llvm.org/D85256
We had a conversion from const char * to StringRef and const char *
to std::string conversion. These both do their own
strlen call if the compiler doens't figure out how to share them.
By adding the temporary StringRef we can convert it to std::string
instead.
The other case is to use a StringSwitch<StringRef> instead of
StringSwitch<const char *> since the output values of the switch
are string literals. This allows the length to be computed at
compile time. Otherwise we have to convert from const char *
to std::string after the StringSwitch.
I believe this function used to be called directly from X86
specific code and was used to immediately create -target-cpu
command line. A later refactoring changed it to to be called from
a generic getCPU function that returns std::string. So on some
paths we created a string using MakeArgString converted that to
std::string then called MakeArgString again from that.
Instead just return std::string directly like the other targets.
Add address space to indirect abi info and use it for kernels.
Previously, indirect arguments assumed assumed a stack passed object
in the alloca address space using byval. A stack pointer is unsuitable
for kernel arguments, which are passed in a separate, constant buffer
with a different address space.
Start using the new byref for aggregate kernel arguments. Previously
these were emitted as raw struct arguments, and turned into loads in
the backend. These will lower identically, although with byref you now
have the option of applying an explicit alignment. In the future, a
reasonable implementation would use byref for all kernel arguments
(this would be a practical problem at the moment due to losing things
like noalias on pointer arguments).
This is mostly to avoid fighting the optimizer's treatment of
aggregate load/store. SROA and instcombine both turn aggregate loads
and stores into a long sequence of element loads and stores, rather
than the optimizable memcpy I would expect in this situation. Now an
explicit memcpy will be introduced up-front which is better understood
and helps eliminate the alloca in more situations.
This skips using byref in the case where HIP kernel pointer arguments
in structs are promoted to global pointers. At minimum an additional
patch is needed to allow coercion with indirect arguments. This also
skips using it for OpenCL due to the current workaround used to
support kernels calling kernels. Distinct function bodies would need
to be generated up front instead of emitting an illegal call.
Instead of accepting the same arguments as regular linker,
the static linker will only accept input files.
Reviewed By: yaxunl
Differential Revision: https://reviews.llvm.org/D85442
Summary:
Introduced OMPChildren class to handle all associated clauses, statement
and child expressions/statements. It allows to represent some directives
more correctly (like flush, depobj etc. with pseudo clauses, ordered
depend directives, which are standalone, and target data directives).
Also, it will make easier to avoid using of CapturedStmt in directives,
if required (atomic, tile etc. directives).
Also, it simplifies serialization/deserialization of the
executable/declarative directives.
Reduces number of allocation operations for mapper declarations.
Reviewers: jdoerfert
Subscribers: yaxunl, guansong, jfb, cfe-commits, sstefan1, aaron.ballman, caomhin
Tags: #clang
Differential Revision: https://reviews.llvm.org/D83261
The second argument of getNaturalAlignIndirect() was `bool ByRef`, but
the implementation was just delegating to getIndirect() with `ByRef`
passed unchanged to `bool ByVal` parameter of getIndirect().
Fix a couple of /*ByRef=*/ comments as well.
Reviewed By: rjmccall
Differential Revision: https://reviews.llvm.org/D85113
`ninja check-all` currently fails on Illumos:
[84/716] Generating default/Asan-i386-inline-Test
FAILED: projects/compiler-rt/lib/asan/tests/default/Asan-i386-inline-Test
cd /var/llvm/dist-amd64-release/projects/compiler-rt/lib/asan/tests && /var/llvm/dist-amd64-release/./bin/clang ASAN_INST_TEST_OBJECTS.gtest-all.cc.i386-inline.o ASAN_INST_TEST_OBJECTS.asan_globals_test.cpp.i386-inline.o ASAN_INST_TEST_OBJECTS.asan_interface_test.cpp.i386-inline.o ASAN_INST_TEST_OBJECTS.asan_internal_interface_test.cpp.i386-inline.o ASAN_INST_TEST_OBJECTS.asan_test.cpp.i386-inline.o ASAN_INST_TEST_OBJECTS.asan_oob_test.cpp.i386-inline.o ASAN_INST_TEST_OBJECTS.asan_mem_test.cpp.i386-inline.o ASAN_INST_TEST_OBJECTS.asan_str_test.cpp.i386-inline.o ASAN_INST_TEST_OBJECTS.asan_test_main.cpp.i386-inline.o -o /var/llvm/dist-amd64-release/projects/compiler-rt/lib/asan/tests/default/./Asan-i386-inline-Test -g --driver-mode=g++ -fsanitize=address -m32
ld: fatal: unrecognized option '--no-as-needed'
ld: fatal: use the -z help option for usage information
clang-11: error: linker command failed with exit code 1 (use -v to see invocation)
`clang` unconditionally passes `--as-needed`/`--no-as-needed` to the
linker. This works on Solaris 11.[34] which added a couple of option
aliases to the native linker to improve compatibility with GNU `ld`.
Illumos `ld` didn't do this, so one needs to use the corresponding
native options `-z ignore`/`-z record` instead.
Because this works on both Solaris and Illumos, the current patch always
passes the native options on Solaris. This isn't fully correct, however:
when using GNU `ld` on Solaris (not yet supported; I'm working on that),
one still needs `--as-needed` instead.
I'm hardcoding this decision because a generic detection via a `cmake` test
is hard: many systems have their own implementation of `getDefaultLinker`
and `cmake` would have to duplicate the information encoded there.
Besides, it would still break when `-fuse-ld` is used.
Tested on `amd64-pc-solaris2.11` (Solaris 11.4 and OpenIndiana 2020.04),
`sparcv9-sun-solaris2.11`, and `x86_64-pc-linux-gnu`.
Differential Revision: https://reviews.llvm.org/D84412
47f7174ffa changed the types used in the Wasm SIMD builtin functions,
but not all of their uses in wasm_simd128.h were updated. This commit
fixes wasm_simd128.h and adds tests to make sure similar problems do
not pass uncaught in the future.
Differential Revision: https://reviews.llvm.org/D85347
Normally math functions are forwarded to __nv_* counterparts provided by CUDA's
libdevice bitcode. However, __nv_rint*()/__nv_nearbyint*() functions there have
a bug -- they use round() which rounds *up* instead of rounding towards the
nearest integer, so we end up with rint(2.5f) producing 3.0 instead of expected
2.0. The broken bitcode is not actually used by NVCC itself, which has both a
work-around in CUDA headers and, in recent versions, uses correct
implementations in NVCC's built-ins.
This patch implements equivalent workaround and directs rint*/nearbyint* to
__builtin_* variants that produce correct results.
Differential Revision: https://reviews.llvm.org/D85236
Summary:
The MultiLine option in BreakBeforeBraces was only handling standard
control statement, leading to invalid indentation with for each macros:
Previous behavior:
/* invalid: brace should be on the same line */
Q_FOREACH(int a; list)
{
foo();
}
/* valid */
Q_FOREACH(int longVariable;
list)
{
foo();
}
To fix this, simply add the TT_ForEachMacro kind in the list of
recognized control statements for the multiline option.
This is a fix for https://bugs.llvm.org/show_bug.cgi?id=44632
Reviewers: MyDeveloperDay, mitchell-stellar
Reviewed by: mitchell-stellar
Contributed by: vthib
Subscribers: cfe-commits
Tags: #clang, #clang-format, #clang-tools-extra
Differential Revision: https://reviews.llvm.org/D85304
The _ExtInt(1) in getTypeForMem was hitting the bool logic for expanding
to an 8 bit value. The result was an assert, or store i1 %0, i8* %2, align 1
since the parameter IS an i1. This patch changes the 'forMem' test to
exclude ext-int from the bool test.
Without this patch, the following example fails but shouldn't
according to OpenMP TR8:
```
#pragma omp target enter data map(alloc:i)
#pragma omp target data map(present, alloc: i)
{
#pragma omp target exit data map(delete:i)
} // fails presence check here
```
OpenMP TR8 sec. 2.22.7.1 "map Clause", p. 321, L23-26 states:
> If the map clause appears on a target, target data, target enter
> data or target exit data construct with a present map-type-modifier
> then on entry to the region if the corresponding list item does not
> appear in the device data environment an error occurs and the
> program terminates.
There is no corresponding statement about the exit from a region.
Thus, the `present` modifier should:
1. Check for presence upon entry into any region, including a `target
exit data` region. This behavior is already implemented correctly.
2. Should not check for presence upon exit from any region, including
a `target` or `target data` region. Without this patch, this
behavior is not implemented correctly, breaking the above example.
In the case of `target data`, this patch fixes the latter behavior by
removing the `present` modifier from the map types Clang generates for
the runtime call at the end of the region.
In the case of `target`, we have not found a valid OpenMP program for
which such a fix would matter. It appears that, if a program can
guarantee that data is present at the beginning of a `target` region
so that there's no error there, that data is also guaranteed to be
present at the end. This patch adds a comment to the runtime to
document this case.
Reviewed By: grokos, RaviNarayanaswamy, ABataev
Differential Revision: https://reviews.llvm.org/D84422
NamedDecl::printName will print the pretty-printed name of the entity, which
is not what we want here (we should print "enum { e };" instead of "enum
(unnamed enum at input.cc:1:5) { e };").
For now only DecompositionDecl and MDGuidDecl have an overloaded printName so
this does not result in any functional change, but this change is needed since
I will be adding overloads to better handle unnamed entities in diagnostics.
sizeof(ConstantMatrixTypeBitfields) > 8 which increases the size of every type.
This was not detected because no corresponding static_assert for its size was
added.
To prevent this from occuring again replace the various static_asserts for
the size of each of the bit-field classes by a single static_assert for the
size of Type.
I have left ConstantMatrixType::MaxElementsPerDimension unchanged since
the limit is exercised by multiple tests.
`OS << ND->getDeclName();` is equivalent to `OS << ND->getNameAsString();`
without the extra temporary string.
This is not quite a NFC since two uses of `getNameAsString` in a
diagnostic are replaced, which results in the named entity being
quoted with additional "'"s (ie: 'var' instead of var).
nvcc supports accessing file-scope static device variables in host code by host APIs
like cudaMemcpyToSymbol etc.
CUDA/HIP let users access device variables in host code by shadow variables. In host compilation,
clang emits a shadow variable for each device variable, and calls __*RegisterVariable to
register it in init function. The address of the shadow variable and the device side mangled
name of the device variable is passed to __*RegisterVariable. Runtime looks up the symbol
by name in the device binary to find the address of the device variable.
The problem with static device variables is that they have internal linkage, therefore their
name may be changed by the linker if there are multiple symbols with the same name. Also
they end up as local symbols in the elf file, whereas the runtime only looks up the global symbols.
Another reason for making the static device variables external linkage is that they may be
initialized externally by host code and their final value may be accessed by host code
after kernel execution, therefore they actually have external linkage. Giving them internal
linkage will cause incorrect optimizations on them.
To support accessing static device var in host code for -fno-gpu-rdc mode, change the intnernal
linkage to external linkage. The name does not need change since there is only one TU for
-fno-gpu-rdc mode. Also the externalization is done only if the device static var is referenced
by host code.
Differential Revision: https://reviews.llvm.org/D80858
This patch simplified IR generation for __builtin_btf_type_id().
For __builtin_btf_type_id(obj, flag), previously IR builtin
looks like
if (obj is a lvalue)
llvm.bpf.btf.type.id(obj.ptr, 1, flag) !type
else
llvm.bpf.btf.type.id(obj, 0, flag) !type
The purpose of the 2nd argument is to differentiate
__builtin_btf_type_id(obj, flag) where obj is a lvalue
vs.
__builtin_btf_type_id(obj.ptr, flag)
Note that obj or obj.ptr is never used by the backend
and the `obj` argument is only used to derive the type.
This code sequence is subject to potential llvm CSE when
- obj is the same .e.g., nullptr
- flag is the same
- metadata type is different, e.g., typedef of struct "s"
and strust "s".
In the above, we don't want CSE since their metadata is different.
This patch change IR builtin to
llvm.bpf.btf.type.id(seq_num, flag) !type
and seq_num is always increasing. This will prevent potential
llvm CSE.
Also report an error if the type name is empty for
remote relocation since remote relocation needs non-empty
type name to do relocation against vmlinux.
Differential Revision: https://reviews.llvm.org/D85174
This allows people to use `int8_t` instead of `char`, -funsigned-char,
and generally decouples SIMD from the specialness of `char`.
And it makes intrinsics like `__builtin_wasm_add_saturate_s_i8x16`
and `__builtin_wasm_add_saturate_u_i8x16` use signed and unsigned
element types, respectively.
Differential Revision: https://reviews.llvm.org/D85074
This patch added the following additional compile-once
run-everywhere (CO-RE) relocations:
- existence/size of typedef, struct/union or enum type
- enum value and enum value existence
These additional relocations will make CO-RE bpf programs more
adaptive for potential kernel internal data structure changes.
For existence/size relocations, the following two code patterns
are supported:
1. uint32_t __builtin_preserve_type_info(*(<type> *)0, flag);
2. <type> var;
uint32_t __builtin_preserve_field_info(var, flag);
flag = 0 for existence relocation and flag = 1 for size relocation.
For enum value existence and enum value relocations, the following code
pattern is supported:
uint64_t __builtin_preserve_enum_value(*(<enum_type> *)<enum_value>,
flag);
flag = 0 means existence relocation and flag = 1 for enum value.
relocation. In the above <enum_type> can be an enum type or
a typedef to enum type. The <enum_value> needs to be an enumerator
value from the same enum type. The return type is uint64_t to
permit potential 64bit enumerator values.
Differential Revision: https://reviews.llvm.org/D83242
Since we permit using SOME attributes (at the moment, just 1) with
multiversioning, we should improve the message as it still implies that
no attributes should be combined with multiversioning.
We use inheritance to model the grammar's disjunction rule:
literal:
integer-literal
character-literal
floating-point-literal
string-literal
boolean-literal
pointer-literal
user-defined-literal
Differential Revision: https://reviews.llvm.org/D85186
Summary:
In case a pointer iterator is incremented in a binary plus expression
(operator+), where the iterator is on the RHS, IteratorModeling should
now detect, and track the resulting value.
Reviewers: Szelethus, baloghadamsoftware
Reviewed By: baloghadamsoftware
Subscribers: rnkovacs, whisperity, xazax.hun, baloghadamsoftware, szepet, a.sidorin, mikhail.ramalho, Szelethus, donat.nagy, dkrupp, Charusso, steakhal, martong, ASDenysPetrov, cfe-commits
Tags: #clang
Differential Revision: https://reviews.llvm.org/D83190
In order to follow NEC Aurora SX VE ABI correctly, change to sign/zero
extend integer arguments and return values smaller than 64 bits in clang.
Also update regression test.
Reviewed By: simoll
Differential Revision: https://reviews.llvm.org/D85071
This fixes an inconsistency: clang -c -gz -fno-integrated-as means SHF_COMPRESSED
while clang -c -gz -fintegrated-as means zlib-gnu.
---
Since July 15, 2015 (binutils-gdb commit
19a7fe52ae3d0971e67a134bcb1648899e21ae1c, included in 2.26), gas
--compress-debug-sections=zlib (gcc -gz) means zlib-gabi:
SHF_COMPRESSED. Before that GCC/binutils used zlib-gnu (.zdebug).
clang's -gz was introduced in rC306115 (Jun 2017) to indicate zlib-gnu. It
is 2020 now and it is not unreasonable to assume users of the new
feature to have new linkers (ld.bfd/gold >= 2.26, lld >= rLLD273661).
Change clang's default accordingly to improve standard conformance.
zlib-gnu becomes out of fashion and gets poorer toolchain support.
Its mangled names confuse tools and are more likely to cause problems.
Reviewed By: compnerd
Differential Revision: https://reviews.llvm.org/D61689
Specified in https://github.com/WebAssembly/simd/pull/237, these
instructions load the first vector lane from memory and zero the other
lanes. Since these instructions are not officially part of the SIMD
proposal, they are only available on an opt-in basis via LLVM
intrinsics and clang builtin functions. If these instructions are
merged to the proposal, this implementation will change so that the
instructions will be generated from normal IR. At that point the
intrinsics and builtin functions would be removed.
This PR also changes the opcodes for the experimental f32x4.qfm{a,s}
instructions because their opcodes conflicted with those of the
v128.load{32,64}_zero instructions. The new opcodes were chosen to
match those used in V8.
Differential Revision: https://reviews.llvm.org/D84820
Artem Dergachev