Summary:
This option is disabled by our other test suites, and will cause
failures when unit tests abort instead of failing with an error code.
Will also prevent the test suite from being too slow.
Reviewers: kubamracek, alekseyshl
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D32129
llvm-svn: 300593
UBSAN 'invalid value' failures
The commit r300556 introduced a UBSAN issue that was caught by
http://lab.llvm.org:8011/builders/sanitizer-x86_64-linux-bootstrap. The DenseMap
failed to create an empty/tombstone value as the empty/tombstone values for the
SubjectMatchRule enum were not valid enum constants.
llvm-svn: 300591
This is not ideal, but it should get the bot going again. I'll need to revisit this if we want to get signal handling working on Windows.
llvm-svn: 300587
Android x86_64 target uses f128 type and stores f128 values in %xmm* registers.
SoftenFloatRes_EXTRACT_VECTOR_ELT should not convert result value
from f128 to i128.
Differential Revision: http://reviews.llvm.org/D32102
llvm-svn: 300583
Summary: This patch adds IPv6 support to debugserver. It follows a similar pattern to the changes proposed for LLDB/Host except that the listen implementation is only with kqueue(2) because debugserver is only supported on Darwin.
Reviewers: jingham, jasonmolenda, clayborg
Reviewed By: clayborg
Subscribers: mgorny, lldb-commits
Differential Revision: https://reviews.llvm.org/D31824
llvm-svn: 300580
Summary:
This patch adds IPv6 support to LLDB/Host's TCP socket implementation. Supporting IPv6 involved a few significant changes to the implementation of the socket layers, and I have performed some significant code cleanup along the way.
This patch changes the Socket constructors for all types of sockets to not create sockets until first use. This is required for IPv6 support because the socket type will vary based on the address you are connecting to. This also has the benefit of removing code that could have errors from the Socket subclass constructors (which seems like a win to me).
The patch also slightly changes the API and behaviors of the Listen/Accept pattern. Previously both Listen and Accept calls took an address specified as a string. Now only listen does. This change was made because the Listen call can result in opening more than one socket. In order to support listening for both IPv4 and IPv6 connections we need to open one AF_INET socket and one AF_INET6 socket. During the listen call we construct a map of file descriptors to addrin structures which represent the allowable incoming connection address. This map removes the need for taking an address into the Accept call.
This does have a change in functionality. Previously you could Listen for connections based on one address, and Accept connections from a different address. This is no longer supported. I could not find anywhere in LLDB where we actually used the APIs in that way. The new API does still support AnyAddr for allowing incoming connections from any address.
The Listen implementation is implemented using kqueue on FreeBSD and Darwin, WSAPoll on Windows and poll(2) everywhere else.
Reviewers: zturner, clayborg
Subscribers: jasonmolenda, labath, lldb-commits, emaste
Differential Revision: https://reviews.llvm.org/D31823
llvm-svn: 300579
- To be consistent with the rest of the intrinsics headers, I removed the tags <i> .. </i> for marking instruction names in italics in in smmintrin.h.
- Formatting changes to fit into 80 characters.
I got an OK from Eric Christopher to commit doxygen comments without prior code
review upstream.
llvm-svn: 300578
In tryToVectorizeList, under a very limited circumstance (when entered
from tryToVectorizePair), the values may be reordered (swapped) and the
SLP tree is built with the new order. This extends that to the case when
starting from phis in vectorizeChainsInBlock when there are exactly two
phis. The textual order of phi nodes shouldn't really matter. Without
this change, the loop body in the accompnaying test case is fully vectorized
when we swap the orde of the phis but not with this order. While this
doesn't solve the phi-ordering problem in a general way (for more than 2
phis), this is simple fix that piggybacks on an existing mechanism and
is useful in cases like multiplying two complex numbers.
Differential revision: https://reviews.llvm.org/D32065
llvm-svn: 300574
The Result variable is unused both in Sema::CheckARMBuiltinFunctionCall
and Sema::CheckAArch64BuiltinFunctionCall, remove it.
Patch by Wei-Ren Chen!
Reviewers: craig.topper, rnk
Reviewed By: rnk
Subscribers: aemerson, cfe-commits, rengolin
Differential Revision: https://reviews.llvm.org/D32014
llvm-svn: 300572
This patch uses lshrInPlace to replace code where the object that lshr is called on is being overwritten with the result.
This adds an lshrInPlace(const APInt &) version as well.
Differential Revision: https://reviews.llvm.org/D32155
llvm-svn: 300566
r285226 dropped the code that did these checks. I am pretty
sure that was inadvertent, so I added that back in and added
a test for it.
<rdar://problem/31661252>
llvm-svn: 300564
Remove non-consecutive stores from store merge candidate search as
they cannot be merged and will prevent us from finding subsequent
mergeable store cases.
Reviewers: jyknight, bogner, javed.absar, spatel
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D32086
llvm-svn: 300561
This patch is part of D28975's breakdown.
Add caching for block masks similar to the cache already used for edge masks,
replacing generation per user with reusing the first generated value which
dominates all uses.
Differential Revision: https://reviews.llvm.org/D32054
llvm-svn: 300557
This is a recommit of r300539 that was reverted in r300543 due to test failures.
The original commit message is displayed below:
The new '#pragma clang attribute' directive can be used to apply attributes to
multiple declarations. An attribute must satisfy the following conditions to
be supported by the pragma:
- It must have a subject list that's defined in the TableGen file.
- It must be documented.
- It must not be late parsed.
- It must have a GNU/C++11 spelling.
Differential Revision: https://reviews.llvm.org/D30009
llvm-svn: 300556
Summary:
* Add checks for store. That is needed because GlobalsAA is called
twice in the current pipeline with different sets of Function passes
following it. However, the loads are eliminated using instcombine
which happens everywhere. On the other hand, DeadStoreElimination is
performed only once so by checking for store we'll be able to catch
more cases when GlobalsAA is invalidated unintentionally.
* Add empty function above/below the test so that we don't depend on
the relative order of instcombine/dead-store-elimination and the
pass that invalidates the analysis (inside the same
FunctionPassManager).
Reviewers: kristof.beyls
Reviewed By: kristof.beyls
Subscribers: llvm-commits, n.bozhenov
Differential Revision: https://reviews.llvm.org/D32015
Patch by Andrei Elovikov <andrei.elovikov@intel.com>
llvm-svn: 300553
This passes an option to the ARM assembly parser to emit build
attributes for the hardware selected by command line options, when
assembling an assembly file.
This is not enabled for C/C++, as this would result in duplicate build
attribute directives being emitted in each inline assembly block, when
emitting assembly.
This also adds an option to allow disabling this behaviour for assembly
files, for users who were relying on the old behaviour.
Differential revision: https://reviews.llvm.org/D31813
llvm-svn: 300550
In the assembler, we should emit build attributes based on the target
selected with command-line options. This matches the GNU assembler's
behaviour. We only do this for build attributes which describe the
hardware that is expected to be available, not the ones that describe
ABI compatibility.
This is done by moving some of the attribute emission code to
ARMTargetStreamer, so that it can be shared between the assembly and
code-generation code paths. Since the assembler only creates a
MCSubtargetInfo, not an ARMSubtarget, the code had to be changed to
check raw features, and not use the convenience functions in
ARMSubtarget.
If different attributes are later specified using the .eabi_attribute
directive, then they will take precedence, as happens when the same
.eabi_attribute is specified twice.
This must be enabled by an option, because we don't want to do this when
parsing inline assembly. The attributes would match the ones emitted at
the start of the file, so wouldn't actually change the emitted object
file, but the extra directives would be added to every inline assembly
block when emitting assembly, which we'd like to avoid.
The majority of the changes in the build-attributes.ll test are just
re-ordering the directives, because the hardware attributes are now
emitted before the ABI ones. However, I did fix one bug which I spotted:
Tag_CPU_arch_profile was not being emitted for v6M.
Differential revision: https://reviews.llvm.org/D31812
llvm-svn: 300547
Matt Arsenault