The FXSAVE/XSAVE data can have two different layouts on x86_64. When
called as FXSAVE/XSAVE..., the Instruction Pointer and Address Pointer
registers are reported using a 16-bit segment identifier and a 32-bit
offset. When called as FXSAVE64/XSAVE64..., they are reported using
a complete 64-bit offsets instead.
LLDB has historically followed GDB and unconditionally used to assume
the 32-bit layout, with the slight modification of possibly
using a 32-bit segment register (i.e. extending the register into
the reserved 16 upper bits). When the underlying operating system used
FXSAVE64/XSAVE64..., the pointer was split into two halves,
with the upper half repored as the segment registers. While
reconstructing the full address was possible on the user end (and e.g.
the FPU register tests did that), it certainly was not the most
convenient option.
Introduce a two additional 'fip' and 'fdp' registers that overlap
with 'fiseg'/'fioff' and 'foseg'/'foff' respectively, and report
the complete 64-bit address.
Differential Revision: https://reviews.llvm.org/D91497
Depends on D90490.
The stop command is simple and invokes the new method Trace::StopTracingThread(thread).
On the other hand, the start command works by delegating its implementation to a CommandObject provided by the Trace plugin. This is necessary because each trace plugin needs different options for this command. There's even the chance that a Trace plugin can't support live tracing, but instead supports offline decoding and analysis, which means that "thread trace dump instructions" works but "thread trace start" doest. Because of this and a few other reasons, it's better to have each plugin provide this implementation.
Besides, I'm using the GetSupportedTraceType method introduced in D90490 to quickly infer what's the trace plug-in that works for the current process.
As an implementation note, I moved CommandObjectIterateOverThreads to its header so that I can use it from the IntelPT plugin. Besides, the actual start and stop logic for intel-pt is not part of this diff.
Reviewed By: clayborg
Differential Revision: https://reviews.llvm.org/D90729
I noticed that Process is inheriting from UserID to store its PID value. This patch
replaces this with a dedicated field in the Process class. This is NFC, but has some
small effects on the code using Process:
* `GetID()` now returns a `lldb::pid_t` like all other process code instead of `lldb::user_id_t`. Both are typedefs for `uint64_t`, so no change in behaviour.
* The equality operators defined for UserID no longer accept Process instances.
* Removes the inherited method `Process::Clear()` which didn't actually clear anything beside the PID value.
We maybe should also remove the getters/setters to `S/GetPID` or something like that. I can update all the code for that
in a follow-up NFC commit.
Reviewed By: labath
Differential Revision: https://reviews.llvm.org/D91699
init_llgs_test no longer takes an argument
but these two were not updated.
Also fix some mistakes in TestAutoInstallMainExecutable
to get it passing again.
Reviewed By: JDevlieghere, labath
Differential Revision: https://reviews.llvm.org/D91612
Adds a command line option that makes debugserver propagate the SIGSEGV
signal to the target process.
Motivation: I'm one of the maintainers of Delve [1] a debugger for Go.
We use debugserver as our backend on macOS and one of the most often
reported bugs is that, on macOS, we don't propagate SIGSEGV back to the
target process [2]. Sometimes some programs will actually cause a
SIGSEGV, by design, and then handle it. Those programs can not be
debugged at all.
Since catching signals isn't very important for a Go debugger I'd much
rather have a command line option in debugserver that causes it to let
SIGSEGV go directly to the target process.
[1] https://github.com/go-delve/delve/
[2] https://github.com/go-delve/delve/issues/852
Differential revision: https://reviews.llvm.org/D89315
This moves in the direction of our effort to synchronize register descriptions
between LLDB and GDB xml description. We want to able to send registers in a
way that their offset fields can be re-constructed based on register sizes
in the increasing order of register number.
In context to Arm64 SVE, FPCR and FPSR are same registers in FPU regset and
SVE regset. Previously FPSR/FPCR offset was set at the end of SVE data
because Linux ptrace data placed FPCR and FPSR at the end of SVE register set.
Considering interoperability with other stubs like QEMU and that g packets
should generate register data in increasing order of register numbers. We
have to move FPCR/FPSR offset up to its original location according to
register numbering scheme of ARM64 registers with SVE registers included.
Reviewed By: labath
Differential Revision: https://reviews.llvm.org/D90741
In our recent discussion we are aiming to make LLDB registers exchange minimum
possible information in qRegisterInfo or XMl register descriptions.
For SVE registers, Z registers are catagorized as primary registers and should
not have any infomration about any pseudo registers. All pseudo registers
should have the information on which primary register they belong to.
This patch removes invalidate_regs list from Z registers and will mitigate its
impact on SVE resize patch in a follow up update.
Reviewed By: labath
Differential Revision: https://reviews.llvm.org/D91057
Add a parser for JSON crashlogs. The CrashLogParser now defers to either
the JSONCrashLogParser or the TextCrashLogParser. It first tries to
interpret the input as JSON, and if that fails falling back to the
textual parser.
Differential revision: https://reviews.llvm.org/D91130
LLDB is currently always activating C++ when parsing expressions as LLDB itself
is using C++ features when creating the final AST that will be codegen'd
(specifically, references to variables, namespaces and using declarations are
used).
This is causing problems for users that have variables in non-C++ programs (e.g.
plain C or Objective-C) that have names which are keywords in C++. Expressions
referencing those variables fail to parse as LLDB's Clang parser thinks those
identifiers are C++ keywords and not identifiers that may belong to a
declaration.
We can't just disable C++ in the expression parser for those situations as
replacing the functionality of the injected C++ code isn't trivial. So this
patch is just disabling most keywords that are exclusive to C++ in LLDB's Clang
parser when we are in a non-C++ expression. There are a few keywords we can't
disable for now:
* `using` as that's currently used in some situations to inject variables into the expression function.
* `__null` as that's used by LLDB to define `NULL`/`Nil`/`nil`.
Getting rid of these last two keywords is possible but is a large enough change
that this will be handled in follow up patches.
Note that this only changes the keyword status of those tokens but this patch
does not remove any C++ functionality from the expression parser. The type
system still follows C++ rules and so does the rest of the expression parser.
There is another small change that gives the hardcoded macro definitions in LLDB
a higher precedence than the macros imported from the Objective-C modules. The
reason for this is that the Objective-C modules in LLDB are actually parsed in
Objective-C++ mode and they end up providing the C++ definitions of certain
system macros (like `NULL` being defined as `nullptr`). So we have to move the
LLDB definition forward and surround the definition from the module with an
`#ifdef` to make sure that we use the correct LLDB definition that doesn't
reference C++ keywords. Or to give an example, this is how the expression source
code changes:
Before:
```
#define NULL (nullptr) // injected module definition
#ifndef NULL
#define NULL (__null) // hardcoded LLDB definition
#endif
```
After:
```
#ifndef NULL
#define NULL (__null) // hardcoded LLDB definition
#endif
#ifndef NULL
#define NULL (nullptr) // injected module definition
#endif
```
Fixes rdar://10356912
Reviewed By: shafik
Differential Revision: https://reviews.llvm.org/D82770
Create a helper GetOffsetRegSetData() method to get pointer
to the regset data accounting for the necessary offset. Establish
the offsets in the constructor and store them in the structure. This
avoids having to add new Get*Offset() methods and combines some common
code.
Differential Revision: https://reviews.llvm.org/D91411
Eliminate the remaining swith-case code for register getters,
and migrate YMM registers to regset-oriented model. Since these
registers are recombined from XMM and YMM_Hi128 XSAVE blocks, while LLDB
gdb-server protocol transmits YMM registers whole, the offset-based
model will not work here. Nevertheless, some improvement was possible.
Replace generic 'XSaveRegSet' along with sub-sets for XSAVE components
with 'YMMRegSet' (and more regsets in the future as further components
are implemented). Create a helper GetYMMSplitReg() method that obtains
pointers to the appropriate XMM and YMM_Hi128 blocks to reduce code
duplication.
Differential Revision: https://reviews.llvm.org/D91293
Use offset-based method to access x86 debug registers. This also
involves adding a test for the correctness of these offsets, and making
GetDR() method of NativeRegisterContextWatchpoint_x86 public to avoid
duplicate code.
Differential Revision: https://reviews.llvm.org/D91268
Use offset-based method to access base x87 FPU registers, using offsets
relative to the position of 'struct FPR', as determined by the location
of first register in it (fctrl). Change m_fpr to use a fixed-size array
matching FXSAVE size (512 bytes). Add unit tests for verifying
RegisterInfo offsets and sizes against the FXSAVE layout.
Differential Revision: https://reviews.llvm.org/D91248
Read and write registers from m_gpr using offsets from RegisterInfo
rather than explicit switch-case. This eliminates a lot of redundant
code, and avoids mistakes such as type mismatches seen recently (wrt
segment registers). The same logic will be extended to other register
sets in the future.
Make m_gpr an uint8_t std::array to ease accesses. Ideally, we could
avoid including <machine/reg.h> entirely in the future and instead
get the correct GPR size from Utility/RegisterContextFreeBSD_* somehow.
While at it, modify register set logic to use an explicit enum with
llvm::Optional<>, making the code cleaner and at the same time enabling
compiler warnings for unhandled sets.
Since now we're fully relying on 'struct GPR' defined
in Utility/RegisterContextFreeBSD_* being entirely in sync with
the system structure, add unit tests to verify the field offsets
and sizes.
Differential Revision: https://reviews.llvm.org/D91216
I think the check for whether the process is connected is totally bogus
in the first place, but on the off-chance that's it's not, we should
behave the same in synchronous and asynchronous mode.
I only have a crash report for this. I could reproduce it with a slightly older
lldb by running an expression that called pthread_kill, but we started making modules
for our expression JIT code, so that no longer triggers the bug. I can't think of another
good way to test it but the fix is obvious.
"[lldb/DataFormatters] Display null C++ pointers as nullptr" added an assumption
that the member we check for is always a nullptr, but it is actually never
initialized. That causes the test to randomly fail due to the pointer having
some random value that isn't 0.
On x86_64, when you hit a __builtin_debugtrap instruction, you
can continue past this in the debugger. This patch has debugserver
recognize the specific instruction used for __builtin_debugtrap
and advance the pc past it, so that the user can continue execution
once they've hit one of these.
In the patch discussion, we were in agreement that it would be better
to have this knowledge up in lldb instead of depending on each
stub rewriting the pc behind the debugger's back, but that's a
larger scale change for another day.
<rdar://problem/65521634>
Differential revision: https://reviews.llvm.org/D91238
Display null pointer as `nullptr`, `nil` and `NULL` for C++,
Objective-C/Objective-C++ and C respectively. The original motivation
for this patch was to display a null std::string pointer as nullptr
instead of "", but the fix seemed generic enough to be done for all
summary providers.
Differential revision: https://reviews.llvm.org/D77153
When parsing DWARF and laying out bit-fields we don't properly take into account when they are in a union, they will all have a zero offset.
Differential Revision: https://reviews.llvm.org/D91118
When I added TestAbortExitCode I actually planned this to be a generic test for the
exit code functionality on POSIX systems. However due to all the different test setups we
can have I don't think this worked out. Right now the test had to be made so permissive
that it pretty much can't fail.
Just to summarize, we would need to support the following situations:
1. ToT debugserver (on macOS)
2. lldb-server (on other platforms)
3. Any old debugserver version when using the system debugserver (on macOS)
This patch is removing TestAbortExitCode and adds a ToT debugserver specific test
that checks the patch that motivated the whole exit code testing. There is already
an exit-code test for lldb-server from what I can see and 3) is pretty much untestable
as we don't know anything about the system debugserver.
Reviewed By: kastiglione
Differential Revision: https://reviews.llvm.org/D89305
This adds `expect_var_path` to test variable paths so we no longer have to
use `frame var` and find substrs in the command output. The behaviour
is identical with `expect_expr` (and it also uses the same checking backend),
but it instead calls `GetValueForVariablePath` to evaluate the string as a variable
path.
Also rewrites a few of the tests that previously used `frame variable` to use
`expect_var_path`.
Reviewed By: labath
Differential Revision: https://reviews.llvm.org/D90450
Add a test verifying that after the 'watchpoint' command, new values
of x86 debug registers can be read back correctly. The primary purpose
of this test is to catch broken DRn reading and help debugging it.
Differential Revision: https://reviews.llvm.org/D91264
Fix Debug Register offsets to be specified relatively to UserArea
on FreeBSD/amd64 and FreeBSD/i386, and add them to UserArea on i386.
This fixes overlapping GPRs and DRs in gdb-remote protocol, making it
impossible to correctly get and set debug registers from the LLDB
client.
Differential Revision: https://reviews.llvm.org/D91254
This reverts commit 856fd98a17. The type formatters
use inline namespaces to find the formatter that fits the type ABI, so they
can't just ignore the inline namespaces.
The failing tests should be fixed by da121fff11 .
Commit 5f12f4ff90 made suppressing inline namespaces
when printing typenames default to true. As we're using the inline namespaces
in LLDB to construct internal type names (which need internal namespaces in them
to, for example, differentiate libc++'s std::__1::string from the std::string
from libstdc++), this broke most of the type formatting logic.
Following discussion in D91193, a change made in D88792 was not quite right.
This restores the message argument, and switches from `expect` to `runCmd`.
Differential Revision: https://reviews.llvm.org/D91206
Buildbot failed on Windows
http://lab.llvm.org:8011/#/builders/83/builds/693
Error: On Windows, std::future can't hold an Expected, as it doesn't have a default
constructor.
Solution: Use std::future<bool> instead of std::future<Expected<T>>
Depends on D89283.
The goal of this packet (jTraceGetSupportedType) is to be able to query the gdb-server for the tracing technology that can work for the current debuggeer, which can make the user experience simpler but allowing the user to simply type
thread trace start
to start tracing the current thread without even telling the debugger to use "intel-pt", for example. Similarly, `thread trace start [args...]` would accept args beloging to the working trace type.
Also, if the user typed
help thread trace start
We could directly show the help information of the trace type that is supported for the target, or mention instead that no tracing is supported, if that's the case.
I added some simple tests, besides, when I ran this on my machine with intel-pt support, I got
$ process plugin packet send "jTraceSupportedType"
packet: jTraceSupportedType
response: {"description":"Intel Processor Trace","pluginName":"intel-pt"}
On a machine without intel-pt support, I got
$ process plugin packet send "jTraceSupportedType"
packet: jTraceSupportedType
response: E00;
Reviewed By: clayborg, labath
Differential Revision: https://reviews.llvm.org/D90490
Those two decorators have identical behaviour. This removes
`not_remote_testsuite_ready` as `skipIfRemote` seems more consistent with the
other decorator names we have
Reviewed By: JDevlieghere
Differential Revision: https://reviews.llvm.org/D89376
Copy the recent improvements from the FreeBSDRemote plugin, notably:
- moving event reporting setup into SetupTrace() helper
- adding more debug info into SIGTRAP handling
- handling user-generated (and unknown) SIGTRAP events
- adding missing error handling to the generic signal handler
- fixing attaching to processes
- switching watchpoint helpers to use llvm::Error
- minor style and formatting changes
This fixes a number of tests, mostly related to fixed attaching.
Differential Revision: https://reviews.llvm.org/D91167
Instead of having a custom error message, propagate the llvm::Error from
SystemInitializerCommon. I didn't realize we had this overload until
Pavel mentioned it in D90987 today.
Dwarf says (Section 2.5.1.1. of DWARF v5) that these operations should
push "generic" (pointer-sized) values. This was not the case for
DW_OP_const operations (which were pushing values based on the size of
arguments), nor DW_OP_litN (which were always pushing 64-bit values).
The practical effect of this that were were unable to display the values
of variables if the size of the DW_OP_const opcode was smaller than the
value of the variable it was describing. This would happen because we
would store this (small) result into a buffer and then would not be able
to read sufficient data out of it (in Value::GetValueAsData). Gcc emits
debug info like this.
Other (more subtle) effects are also possible.
The same fix should be applied to DW_OP_const[us] (leb128 versions), but
I'm not doing that right now, because that would cause us to display
wrong (truncated) values of variables on 32-bit targets (pr48087).
Differential Revision: https://reviews.llvm.org/D90840
It seems that TestErrorMessages.test is failing on the standalone + Xcode builds
as lldb-server executable can't be found by lit's default PATH search. I assume
invoking lldb-server via a lit substitution gets this working again as
everything else is working, so that's what this patch is doing.
I had to add the lldb-server substitution as the test seems lldb-server specific
and we don't want it to default to debugserver on Darwin.
Using a substitution also seems in general like a good idea so that the commands
lit is printing on failure are using the full path to lldb-server and can be
re-run in a terminal.
Reviewed By: labath
Differential Revision: https://reviews.llvm.org/D91155
Explicitly copy dbregs to new threads to ensure that watchpoints
are propagated properly. Fixes the test failure due to apparent kernel
race between reporting a new thread and resuming main thread execution
that makes implicit inheritance of dbregs unreliable. By copying them
explicitly, we ensure that the new thread correctly respects watchpoints
that were set after the thread was created but before it was reported.
The code is copied from the NetBSD plugin and modernized to use
llvm::Error.
Differential Revision: https://reviews.llvm.org/D91032
Fix DS/ES/FS/GS register sizes in getter/setter for FreeBSD. Apparently
only CS and SS registers are specified as 64/32-bit in LLDB, while
the others are specified as 16-bit. This fixes the failing
StandardStartupTest.TestStopReplyContainsThreadPcs lldb-server unittest.
Differential Revision: https://reviews.llvm.org/D91076
Update the SIGTRAP handler to account for the possibility of SIGTRAP
being generated by the user, i.e. not having any specific debugging
event associated with it, as well as receiving unknown SIGTRAPs. These
instances of SIGTRAP are passed to the regular signal handler.
Differential Revision: https://reviews.llvm.org/D91007
Make category-specifying files visible. There is really no good reason
to keep them hidden, and having them visible increases the chances
that someone will actually spot them.
Differential Revision: https://reviews.llvm.org/D91065
Replace the plethora of ObjC-implied 'skipUnlessDarwin' decorators
with marking tests as 'objc' category (whenever missing), and skip all
ObjC tests on non-Darwin platforms. I have used '.categories' file
wherever it was present already or all (>1) tests were relying on ObjC,
and explicit add_test_categories() where there was only one test.
Differential Revision: https://reviews.llvm.org/D91056
Part 2 of a fix for JITed code debugging. This has been a regression from 5.0 to 6.0 and it's still reproducible on current master: https://bugs.llvm.org/show_bug.cgi?id=36209 Part 1 was D61611 a while ago.
The in-memory object files we obtain from JITLoaderGDB are not yet relocated. It looks like this used to happen on the LLDB side and my guess is that it broke with D38142. (However, it's hard to tell because the whole thing was broken already due to the bug in part 1.) The patch moved relocation resolution to a later point in time and didn't apply it to in-memory objects. I am not aware of any reason why we wouldn't resolve relocations per-se, so I made it unconditional here. On Debian, it fixes the bug for me and all tests in `check-lldb` are still fine.
Reviewed By: labath
Differential Revision: https://reviews.llvm.org/D90769
This fixes a reproducer test failure that was caused by the undefined
order in which global destructors run. More concretely, the static
instance of the RealFileSystem had been destroyed before we finalized
the reproducer, which uses it to copy files into the reproducer. By
exiting normally, we call SBDebugger::Terminate and finalize the
reproducer before any static dtors are run.
Fix DS/ES/FS/GS register sizes in getter/setter for NetBSD. Apparently
only CS and SS registers are specified as 64/32-bit in LLDB, while
the others are specified as 16-bit.
Differential Revision: https://reviews.llvm.org/D91090
During active replay, the ::Initialize call is replayed like any other
SB API call and the return value is ignored. Since we can't intercept
this, we terminate here before the uninitialized debugger inevitably
crashes.
Differential revision: https://reviews.llvm.org/D90987
I found a few cases where entries in the debug_line for a specific line of code have invalid entries (the address is outside of a code section or no section at all) and also valid entries. When this happens lldb might not set the breakpoint because the first line entry it will find in the line table might be the invalid one and since it's range is "invalid" no location is resolved. To get around this I changed the way we parse the line sequences to ignore those starting at an address under the first code segment.
Greg suggested to implement it this way so we don't need to check all sections for every line sequence.
Reviewed By: clayborg
Differential Revision: https://reviews.llvm.org/D87172
When LLDB Python bindings are used and stack backtraces are enabled
for logging, getMainExecutable() is called with argv0 being null.
This caused the fallback function getprogpath() (used on FreeBSD, NetBSD
and Linux) to segfault. Make it handle null executable name gracefully.
Differential Revision: https://reviews.llvm.org/D91012
TestWatchpointMultipleThreads currently accounts for two scenarios:
setting the watchpoint before a new thread starts (presumably, verifying
that it will be propagated to the new thread) and setting it after
the thread starts (presumably, verifying that a new watchpoint is set
on all threads). However, the latter test currently assumes that
the thread will be reported to the debugger before the breakpoint is
hit. This is not the case on FreeBSD and NetBSD.
On NetBSD, new threads do not inherit debug registers from their parent
threads. Instead, LLDB copies them manually after the new thread is
reported. Since the thread is actually reported after the second
breakpoint location, both tests effectively check the same behavior
(i.e. watchpoint being set before the new thread is reported).
On FreeBSD, new threads inherit debug registers and we seem to hit
an interesting race condition. While the thread is reported after
the breakpoint is hit, the kernel seems to construct it and copy
the debug register before that happens. As a result, setting
the watchpoint at the second breakpoint location modifies the debug
registers of the first thread after they have been copied to the second
thread but before the debugger is aware of it. Therefore,
the watchpoint is not propagated to the second thread and the test
fails.
Extend the test to cover all three possible scenarios: setting
watchpoint before the thread is lanched, after it is launched but before
it is guaranteed to have started and after it has actually started. Add
a second barrier to account for the last case. This should ensure that
the second assumption (i.e. that the watchpoint is set on all currently
known threads) is actually tested on FreeBSD and NetBSD.
Differential Revision: https://reviews.llvm.org/D91030
This would be reproducible in future DWZ category of the testsuite as:
Failed Tests (1):
lldb-api :: python_api/symbol-context/two-files/TestSymbolContextTwoFiles.py
Differential Revision: https://reviews.llvm.org/D91014
Use skipUnlessDarwin decorator for tests that are specific to Darwin,
instead of skipIf... for all other platforms. This should make it clear
that these tests are not supposed to work elsewhere. It will also make
these tests stop repeatedly popping up while I look for tests that could
be fixed on the platform in question.
Differential Revision: https://reviews.llvm.org/D91003
Sometimes builds will fail with errors like:
```
In file included from /build/external/llvm-project/lldb/source/Symbol/SwiftASTContext.cpp:52:
In file included from /build/external/swift/include/swift/IRGen/Linking.h:22:
In file included from /build/external/swift/include/swift/SIL/SILFunction.h:24:
In file included from /build/external/swift/include/swift/SIL/SILBasicBlock.h:23:
In file included from /build/external/swift/include/swift/SIL/SILInstruction.h:21:
In file included from /build/external/swift/include/swift/AST/Builtins.h:24:
**/build/external/llvm-project/llvm/include/llvm/IR/Attributes.h:74:14: fatal error: 'llvm/IR/Attributes.inc' file not found**
**^~~~~~~~~~~~~~~~~~~~~~~~**
```
This change ensures the `Attributes.inc` file is generated before building `SwiftASTContext.cpp`.
Differential Revision: https://reviews.llvm.org/D90857
Use positive logic (i.e. llgs_platform/debugserver_platform) for
indicating which platforms use the particular server variant.
Deduplicate the lists — it is rather expected that none of the platforms
using LLGS would use debugserver.
Differential Revision: https://reviews.llvm.org/D90875
Depends on D89408.
This diff finally implements trace decoding!
The current interface is
$ trace load /path/to/trace/session/file.json
$ thread trace dump instructions
thread #1: tid = 3842849, total instructions = 22
[ 0] 0x40052d
[ 1] 0x40052d
...
[19] 0x400521
$ # simply enter, which is a repeat command
[20] 0x40052d
[21] 0x400529
...
This doesn't do any disassembly, which will be done in the next diff.
Changes:
- Added an IntelPTDecoder class, that is a wrapper for libipt, which is the actual library that performs the decoding.
- Added TraceThreadDecoder class that decodes traces and memoizes the result to avoid repeating the decoding step.
- Added a DecodedThread class, which represents the output from decoding and that for the time being only stores the list of reconstructed instructions. Later it'll contain the function call hierarchy, which will enable reconstructing backtraces.
- Added basic APIs for accessing the trace in Trace.h:
- GetInstructionCount, which counts the number of instructions traced for a given thread
- IsTraceFailed, which returns an Error if decoding a thread failed
- ForEachInstruction, which iterates on the instructions traced for a given thread, concealing the internal storage of threads, as plug-ins can decide to generate the instructions on the fly or to store them all in a vector, like I do.
- DumpTraceInstructions was updated to print the instructions or show an error message if decoding was impossible.
- Tests included
Differential Revision: https://reviews.llvm.org/D89283
This test requires running under the Python we built against (which is
easy) and setting up the PYTHONPATH (which is not worth it for this
simple test).
AFAICT, ~TargetList simply implements the default destructor, plus some
locking.
The history is murky, so I'm not sure why we do this locking. Perhaps,
at some point, it was possible to delete the same TargetList instance
from two different threads, setting up a race. If that were true, then
the locking would protect against the race.
Since TargetList is uniquely owned by Debugger (m_target_list), no such
race is possible today.
Testing: check-lldb
Differential Revision: https://reviews.llvm.org/D90895
Factor out dummy target creation from CreateTargetInternal.
This makes it impossible for dummy target creation to accidentally fail
due to too-strict checking in one of the CreateTargetInternal overloads.
Testing: check-lldb
rdar://70630655
Differential Revision: https://reviews.llvm.org/D90872
This patch changes the implementation of Lua's `print()` function to
respect `io.stdout`.
The original implementation uses `lua_writestring()` internally, which is
hardcoded to `stdout`.
Reviewed By: JDevlieghere
Differential Revision: https://reviews.llvm.org/D90787
Remove the thread name caching code. It does not handle the possibility
of thread name changing between requests, therefore breaking
TestGdbRemoteThreadName. While technically we could cache the results
and reset the cache on resuming process, the gain from doing that
does not seem worth the effort.
Differential Revision: https://reviews.llvm.org/D90863
Fix TestGdbRemoteThreadName to call ::pthread_setname_np instead
of ::pthread_set_name_np on FreeBSD. While technically both names
are correct, the former is preferable because of compatibility
with Linux. Furthermore, the latter requires `#include <pthread_np.h>`
that was missing causing the test to fail to compile.
Differential Revision: https://reviews.llvm.org/D90862
The new FreeBSDRemote plugin has reached feature parity on i386
and amd64 targets. Use it by default on these architectures, while
allowing the use of the legacy plugin via FREEBSD_LEGACY_PLUGIN envvar.
Revisit the method of switching plugins. Apparently, the return value
of PlatformFreeBSD::CanDebugProcess() is what really decides whether
the legacy or the new plugin is used.
Update the test status. Reenable the tests that were previously
disabled on FreeBSD and do not cause hangs or are irrelevant to FreeBSD.
Mark all tests that fail reliably as expectedFailure. For now, tests
that are flaky (i.e. produce unstable results) are left enabled
and cause unpredictable test failures.
Differential Revision: https://reviews.llvm.org/D90757
5d64574301 removes this enum value and now
all the switch statements that previously relied on handling this in the
'default' branch are causes compiler warnings due to redundant default cases.
This just removes the now unreachable code in there.
In D89056 the default value for architecture was moved to `build` so that
all called functions see the same architecture value. It seems there are a
few functions that call buildDefault directly (and not via build), so
on some test configurations that set a custom arch value the architecture
value is no longer available.
This just adds the architecture code from build to buildDefault to get
the bots green again while I'm looking for a better solution.
This just adds the simulator platforms to the lldbplatform enumerations
and the respective test decorator.
The platform names for the simulator are just the SDK names since D85537, so
that's why we are not using LLDB's usual platform names here (e.g., SDK =
"iphonesimulator" vs LLDB platform ="ios-simulator").
Also removes the duplicate platform enumaration in lldbplatformutil.py.
Reviewed By: JDevlieghere
Differential Revision: https://reviews.llvm.org/D89694
This originally broke the TestQuoting which explicitly called buildDefault
instead of calling build() and marking the test as no_debug_info_test.
TestQuoting has been rewritten by now and is using `build`, so this should now
pass on all platforms.
Original summary:
The Darwin builder currently assumes in `getArchCFlags` that the passed `arch`
value is an actual string it can string.join with vendor/os/version/env strings:
```
triple = '-'.join([arch, vendor, os, version, env])
```
However this is not true for most tests as we just pass down the `arch=None`
default value from `TestBase.build`. This causes that if we actually end up in
this function we just error out when concatenating `None` with the other actual
strings of vendor/os/version/env. What we should do instead is check that if
there is no test-specific architecture that we fall back to the configuration's
architecture value.
It seems we already worked around this in `builder.getArchSpec` by explicitly
falling back to the architecture specified in the configuration.
This patch just moves this fallback logic to the top `build` function so that it
affects all functions called from `TestBase.build`.
Reviewed By: JDevlieghere
Differential Revision: https://reviews.llvm.org/D89056
`fork` is marked as `__WATCHOS_PROHIBITED __TVOS_PROHIBITED` so the test source
which is calling fork will never compile on watchOS/tvOS. This just adds the
skip decorator for these platforms.
Reviewed By: mib
Differential Revision: https://reviews.llvm.org/D89695
This is a follow up to D88792 which found an issue in a call to PExpectTest's
expect function that allows passing a string to the `substrs` parameter. However
this issue was found by just grepping and TestPExpect's expect function is still
accepting a single string as a value to `substrs`.
This patch adds the same sanity check that D88792 added to the PExpectTest's
implementation of `expect` and also adds a small test for it.
Reviewed By: kastiglione, JDevlieghere
Differential Revision: https://reviews.llvm.org/D89302
The lldb.debugger et al convenience variables are only available from
the interactive script interpreter. In all other scenarios, they are
None (since fc1fd6bf9f) before that they
were default initialized.
The crashlog script was hacking around that by setting the lldb.debugger
to a newly created debugger instance when running outside of the script
interpreter, which works fine until lldb creates a script interpreter
instance under the hood and clears the variables. This was resulting in
an AttributeError when invoking the script directly (from outside of
lldb):
AttributeError: 'NoneType' object has no attribute 'GetSourceManager'
This patch fixes that by passing around the debugger instance.
rdar://64775776
Differential revision: https://reviews.llvm.org/D90706
This class and it's surroundings contain a lot of shady code, but as far
as I can tell all of that code is unreachable (there is no code actually
setting the value to eValueTypeVector).
According to history this class was introduced in 2012 in
r167033/0665a0f09. At that time, the code seemed to serve some purpose,
and it had two entry points (in Value::SetContext and
ClangExpressionDeclMap::LookupDecl). The first entry point was deleted
in D17897 and the second one in r179842/44342735.
The stated purpose of the patch introducing this class was to fix
TestRegisters.py, and "expr $xmm0" in particular. Both of these things
function perfectly well these days without this class.
SBType::GetArrayElementType should return the actual type, not the
canonical type (e.g. int32_t, not the underlying int).
Added a test case to validate the new behavior. I also ran all other
tests on Linux (ninja check-lldb), they all pass.
Differential revision: https://reviews.llvm.org/D90318
Instead of parsing the crashlog in one big loop, use methods that
correspond to the different parsing modes.
Differential revision: https://reviews.llvm.org/D90665
This patch is a minor suggestion to not rely on the fact
that the `LUA_OK` macro is 0.
This assumption could change in future versions of the C API.
Differential Revision: https://reviews.llvm.org/D90556
Disable GetMemoryRegionInfo() in order to unbreak expression parsing.
For some reason, the presence of non-stub function causes LLDB to fail
to detect system libraries correctly. Through being unable to find
mmap() and allocate memory, this leads to expression parser being
broken.
The issue is non-trivial and it is going to require more time debugging.
On the other hand, the downsides of missing the function are minimal
(2 failing tests), and the benefit of working expression parser
justifies disabling it temporarily. Furthermore, the old FreeBSD plugin
did not implement it anyway, so it allows us to switch to the new plugin
without major regressions.
The really curious part is that the respective code in the NetBSD plugin
yields very similar results, yet does not seem to break the expression
parser.
Differential Revision: https://reviews.llvm.org/D90650
Remove the NetBSD-specific override of GetSharedLibraryInfoAddress(),
restoring the generic implementation from NativeProcessELF.
Differential Revision: https://reviews.llvm.org/D90620
Fix two bugs that caused attaching to a process in a pre-connected
lldb-server to fail. These are:
1. Prematurely reporting status in NativeProcessFreeBSD::Attach().
The SetState() call defaulted to notify the process, and LLGS tried
to send the stopped packet before the process instance was assigned
to it. While at it, add an assert for that in LLGS.
2. Duplicate call to ReinitializeThreads() (via SetupTrace()) that
overwrote the stopped status in threads. Now SetupTrace() is called
directly by NativeProcessFreeBSD::Attach() (not the Factory) in place
of ReinitializeThreads().
This fixes at least commands/process/attach/TestProcessAttach.py
and python_api/hello_world/TestHelloWorld.py.
Differential Revision: https://reviews.llvm.org/D90525
Fix process matching by name to make 'process attach -n ...' work.
The process finding code has an optimization that defers getting
the process name and executable format after the numeric (PID, UID...)
parameters are tested. However, the ProcessInstanceInfoMatch.Matches()
method has been matching process name against the incomplete process
information as well, and effectively no process ever matched.
In order to fix this, create a copy of ProcessInstanceInfoMatch, set
it to ignore process name and se this copy for the initial match.
The same fix applies to FreeBSD and NetBSD host code.
Differential Revision: https://reviews.llvm.org/D90454
Implement NativeThreadFreeBSD::GetName(). This is based
on the equivalent code in the legacy FreeBSD plugin, except it is
modernized a bit to use llvm::Optional and std::vector for data storage.
Differential Revision: https://reviews.llvm.org/D90298
Python doesn't support enums before PEP 435, but using a class with
constants is how it's commonly emulated. It can be converted into a real
Enum (in Python 3.4 and later) by extending the Enum class:
class CrashLogParseMode(Enum):
NORMAL = 0
THREAD = 1
IMAGES = 2
THREGS = 3
SYSTEM = 4
INSTRS = 5
This patch calls `lua_close()` on Lua dtor.
This guarantees that the Lua GC finalizers are honored, aside from the
usual internal clean up.
It also guarantees a call to the `__close` metamethod of any active
to-be-closed variable in Lua 5.4.
Since the previous `luaL_openlibs()` was a noop, because the standard
library is cached internally, I've removed it.
Differential Revision: https://reviews.llvm.org/D90557
Changed two references to developers as "he" or "him" to the more neutral "they".
Reviewed By: JDevlieghere, sylvestre.ledru
Differential Revision: https://reviews.llvm.org/D78807
This allows the Target to update its module list when loading a shared
module replaces an equivalent one.
A testcase is added which hits this codepath -- without the fix, the
target reports libbreakpad.so twice in its module list.
Reviewed By: jingham
Differential Revision: https://reviews.llvm.org/D89157
The various GetSharedModule methods have an optional out parameter for
the old module when a file has changed or been replaced, which the
Target uses to keep its module list current/correct. We've been using
a single ModuleSP to track "the" old module, and this change switches
to using a SmallVector of ModuleSP, which has a couple benefits:
- There are multiple codepaths which may discover an old module, and
this centralizes the code for how to handle multiples in one place,
in the Target code. With the single ModuleSP, each place that may
discover an old module is responsible for how it handles multiples,
and the current code is inconsistent (some code paths drop the first
old module, others drop the second).
- The API will be more natural for identifying old modules in routines
that work on sets, like ModuleList::ReplaceEquivalent (which I plan
on updating to report old module(s) in a subsequent change to fix a
bug).
I'm not convinced we can ever actually run into the case that multiple
old modules are found in the same GetOrCreateModule call, but I think
this change makes sense regardless, in light of the above.
When an old module is reported, Target::GetOrCreateModule calls
m_images.ReplaceModule, which doesn't allow multiple "old" modules; the
new code calls ReplaceModule for the first "old" module, and for any
subsequent old modules it logs the event and calls m_images.Remove.
Reviewed By: jingham
Differential Revision: https://reviews.llvm.org/D89156
Current user_id_t format is:
63{isDebugTypes} 62..32{dwo || 7fffffff}
31..0 {die_offset}
while current DIERef format is (I have made up the bit positions but the
field widths do match):
63{m_section==isDebugTypes} 62{m_dwo_num_valid} 61..32{m_dwo_num}
31..0 {m_die_offset}
Proposing to change user_id_t to:
63{isDebugTypes} 62{dwo_is_valid} 61..32{dwo; 0 if !valid}
31..0 {die_offset}
There is no benefit of having 31-bits wide dwo_num in user_id_t when it
gets converted to 30-bits width in DIERef.
This patch is for future DWZ patchset which extends the dwo_is_valid bit
into a 2-bit field (normal, DWO, DWZ, DWZcommon) so that both user_id_t
and DIERef can be changed then the same way.
It would be best to somehow unify user_id_t and DIERef but I do not plan
to do that. user_id_t should probably remain a number for the Python API
compatibility while there still needs to be some class with all the
methods to access it.
SymbolFileDWARF::GetDwpSymbolFile() and SymbolFileDWARF::GetDIE use
0x3fffffff for DWP but that does not clash:
formerly:
31bits32..62:0x7fffffff = normal unit / not any DWO
31bits32..62:0x3fffffff = DWP
31bits32..62:others = DWO unit number
after this patch:
bit62=0 30bits32..61:any = normal unit / not any DWO
bit62=1 30bits32..61:0x3fffffff = DWP
bit62=1 30bits32..61:others = DWO unit number
Differential Revision: https://reviews.llvm.org/D90413
SymbolFileDWARF::GetTypes was not handling dwo correctly. The fix is
simple -- adding a GetNonSkeletonUnit call -- but I've snuck in a small
refactor as well.
Debug server is already launched by prep_debug_monitor_and_inferior. The
second seems to have been benign so far, but after 8cc49bec2 this test
started failing frequently on GreenDragon, and this is the only unusual
thing about it.
The class only supports a single DWARF unit (needed for my new test), and it
reimplements chunks of object and symbol file classes. We can just make it use
the real thing, save some LOC and get the full feature set.
Differential Revision: https://reviews.llvm.org/D90393
The intention is not to allow stop-hook commands to query the
user, so this is correct. It also works around a deadlock in
switching to the Python Session to execute python based commands
in the stop hook when the Debugger stdin is backed by a FILE *.
Differential Revision: https://reviews.llvm.org/D90332
This preprocessor define was meant to be used to conditionally include VCSVersion.inc. However, the define was always set, and it was the content of the header that was conditionally generated. Therefore HAVE_VCS_VERSION_INC should be cleaned up.
Reviewed By: gribozavr2, MaskRay
Differential Revision: https://reviews.llvm.org/D84623
Michał Górny