Summary:
This is a follow-up to r334830 and r335031.
In the valueCoversEntireFragment check we now also handle
the situation when there is a variable length array (VLA)
involved, and the length of the array has been reduced to
a constant.
The ConvertDebugDeclareToDebugValue functions that are related
to PHI nodes and load instructions now avoid inserting dbg.value
intrinsics when the value does not, for certain, cover the
variable/fragment that should be described.
In r334830 we assumed that the value always covered the entire
var/fragment and we had assertions in the code to show that
assumption. However, those asserts failed when compiling code
with VLAs, so we removed the asserts in r335031. Now when we
know that the valueCoversEntireFragment check can fail also for
PHI/Load instructions we avoid to insert the faulty dbg.value
intrinsic in such situations. Compared to the Store instruction
scenario we simply drop the dbg.value here (as the variable does
not change its value due to PHI/Load, so an earlier dbg.value
describing the variable should still be valid).
Reviewers: aprantl, vsk, efriedma
Reviewed By: aprantl
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D48547
llvm-svn: 335580
This recommits r335562 and 335563 as a single commit.
The frontend will surround the intrinsic with the appropriate marshalling to/from a scalar type to match the sigature of the builtin that software expects.
By exposing the vXi1 type directly in the llvm intrinsic we make it available to optimizers much earlier. This can enable the scalar marshalling code to be optimized away.
llvm-svn: 335568
Not only should SafepointIRVerifier ignore unreachable blocks (as suggested in https://reviews.llvm.org/D47011) but it also has to ignore dead blocks.
In @test2 (see the new tests):
br i1 true, label %right, label %left
left:
...
right:
...
merge:
%val = phi i8 addrspace(1)* [ ..., %left ], [ ..., %right ]
use %val
both left and right branches are reachable.
If they collide then SafepointIRVerifier reports an error.
Because of the foldable branch condition GVN finds the left branch dead and removes the phi node entry that merges values from right and left. Then the use comes from the right branch. This results in no collision.
So, SafepointIRVerifier ends up in different results depending on either GVN is run or not.
To solve this issue this patch adds Dead Block detection to SafepointIRVerifier which can ignore dead blocks while validating IR. The Dead Block detection algorithm is taken from GVN but modified to not split critical edges. That is needed to keep CFG unchanged by SafepointIRVerifier.
Patch by Yevgeny Rouban.
Reviewed By: anna, apilipenko, DaniilSuchkov
Differential Revision: https://reviews.llvm.org/D47441
llvm-svn: 335473
Implements PR34259
Intrinsics.h is a very popular header. Most LLVM TUs care about things
like dbg_value, but they don't care how they are implemented. After I
split these out, IntrinsicImpl.inc is 1.7 MB, so this saves each LLVM TU
from scanning 1.7 MB of source that gets pre-processed away.
It also means we can modify intrinsic properties without triggering a
full rebuild, but that's probably less of a win.
I think the next best thing to do would be to split out the target
intrinsics into their own header. Very, very few TUs care about
target-specific intrinsics. It's very hard to split up the target
independent intrinsics like llvm.expect, assume, and dbg.value, though.
llvm-svn: 335407
This is the first pass in the main pipeline to use the legacy PM's
ability to run function analyses "on demand". Unfortunately, it turns
out there are bugs in that somewhat-hacky approach. At the very least,
it leaks memory and doesn't support -debug-pass=Structure. Unclear if
there are larger issues or not, but this should get the sanitizer bots
back to green by fixing the memory leaks.
llvm-svn: 335320
This patch adds support for generating a call graph profile from Branch Frequency Info.
The CGProfile module pass simply gets the block profile count for each BB and scans for call instructions. For each call instruction it adds an edge from the current function to the called function with the current BB block profile count as the weight.
After scanning all the functions, it generates an appending module flag containing the data. The format looks like:
!llvm.module.flags = !{!0}
!0 = !{i32 5, !"CG Profile", !1}
!1 = !{!2, !3, !4} ; List of edges
!2 = !{void ()* @a, void ()* @b, i64 32} ; Edge from a to b with a weight of 32
!3 = !{void (i1)* @freq, void ()* @a, i64 11}
!4 = !{void (i1)* @freq, void ()* @b, i64 20}
Differential Revision: https://reviews.llvm.org/D48105
llvm-svn: 335306
This patch introduces two helpers to make it easier to ignore debug
intrinsics:
- Instruction::getNextNonDebugInstruction()
This is just like Instruction::getNextNode(), except that it skips debug
info.
- skipDebugInfo(BasicBlock::iterator)
A free function which advances a BasicBlock iterator past any debug
info. This is a no-op when the iterator already points to a non-debug
instruction.
Part of: llvm.org/PR37728
Related to: https://reviews.llvm.org/D47874
Differential Revision: https://reviews.llvm.org/D48305
llvm-svn: 335083
The optimizer is getting smarter (eg, D47986) about differentiating shuffles
based on its mask values, so we should make queries on the mask constant
operand generally available to avoid code duplication.
We'll probably use this soon in the vectorizers and instcombine (D48023 and
https://bugs.llvm.org/show_bug.cgi?id=37806).
We might clean up TTI a bit more once all of its current 'SK_*' options are
covered.
Differential Revision: https://reviews.llvm.org/D48236
llvm-svn: 335067
This is r334704 (which was reverted in r334732) with a fix for
types like x86_fp80. We need to use getTypeAllocSizeInBits and
not getTypeStoreSizeInBits to avoid dropping debug info for
such types.
Original commit msg:
> Summary:
> Do not convert a DbgDeclare to DbgValue if the store
> instruction only refer to a fragment of the variable
> described by the DbgDeclare.
>
> Problem was seen when for example having an alloca for an
> array or struct, and there were stores to individual elements.
> In the past we inserted a DbgValue intrinsics for each store,
> just as if the store wrote the whole variable.
>
> When handling store instructions we insert a DbgValue that
> indicates that the variable is "undefined", as we do not know
> which part of the variable that is updated by the store.
>
> When ConvertDebugDeclareToDebugValue is used with a load/phi
> instruction we assert that the referenced value is large enough
> to cover the whole variable. Afaict this should be true for all
> scenarios where those methods are used on trunk. If the assert
> blows in the future I guess we could simply skip to insert a
> dbg.value instruction.
>
> In the future I think we should examine which part of the variable
> that is accessed, and add a DbgValue instrinsic with an appropriate
> DW_OP_LLVM_fragment expression.
>
> Reviewers: dblaikie, aprantl, rnk
>
> Reviewed By: aprantl
>
> Subscribers: JDevlieghere, llvm-commits
>
> Tags: #debug-info
>
> Differential Revision: https://reviews.llvm.org/D48024
llvm-svn: 334830
IEEE 754 defines the expected result on overflow. As far as I know,
hardware implementations (of f16), and compiler-rt (__floatuntisf)
correctly return +-Inf on overflow. And I can't think of any useful
transform that would take advantage of overflow being undefined here.
Differential Revision: https://reviews.llvm.org/D47807
llvm-svn: 334777
Summary:
Do not convert a DbgDeclare to DbgValue if the store
instruction only refer to a fragment of the variable
described by the DbgDeclare.
Problem was seen when for example having an alloca for an
array or struct, and there were stores to individual elements.
In the past we inserted a DbgValue intrinsics for each store,
just as if the store wrote the whole variable.
When handling store instructions we insert a DbgValue that
indicates that the variable is "undefined", as we do not know
which part of the variable that is updated by the store.
When ConvertDebugDeclareToDebugValue is used with a load/phi
instruction we assert that the referenced value is large enough
to cover the whole variable. Afaict this should be true for all
scenarios where those methods are used on trunk. If the assert
blows in the future I guess we could simply skip to insert a
dbg.value instruction.
In the future I think we should examine which part of the variable
that is accessed, and add a DbgValue instrinsic with an appropriate
DW_OP_LLVM_fragment expression.
Reviewers: dblaikie, aprantl, rnk
Reviewed By: aprantl
Subscribers: JDevlieghere, llvm-commits
Tags: #debug-info
Differential Revision: https://reviews.llvm.org/D48024
llvm-svn: 334704
When using clang --save-stats -mllvm -time-passes, both timers and stats
end up in the same json file.
We could end up with things like:
{
"asm-printer.EmittedInsts": 1,
"time.pass.Virtual Register Map.wall": 2.9015541076660156e-04,
"time.pass.Virtual Register Map.user": 2.0500000000000379e-04,
"time.pass.Virtual Register Map.sys": 8.5000000000001741e-05,
}
This patch makes use of the pass argument name (if available) in the
JSON key to end up with things like:
{
"asm-printer.EmittedInsts": 1,
"time.pass.virtregmap.wall": 2.9015541076660156e-04,
"time.pass.virtregmap.user": 2.0500000000000379e-04,
"time.pass.virtregmap.sys": 8.5000000000001741e-05,
}
This also helps avoiding to write another JSON printer to handle all the
cases that we could have in our pass names.
Fixed test instead of adding a new one originally from r334649.
Differential Revision: https://reviews.llvm.org/D48109
llvm-svn: 334657
When using clang --save-stats -mllvm -time-passes, both timers and stats
end up in the same json file.
We could end up with things like:
{
"asm-printer.EmittedInsts": 1,
"time.pass.Virtual Register Map.wall": 2.9015541076660156e-04,
"time.pass.Virtual Register Map.user": 2.0500000000000379e-04,
"time.pass.Virtual Register Map.sys": 8.5000000000001741e-05,
}
This patch makes use of the pass argument name (if available) in the
JSON key to end up with things like:
{
"asm-printer.EmittedInsts": 1,
"time.pass.virtregmap.wall": 2.9015541076660156e-04,
"time.pass.virtregmap.user": 2.0500000000000379e-04,
"time.pass.virtregmap.sys": 8.5000000000001741e-05,
}
This also helps avoiding to write another JSON printer to handle all the
cases that we could have in our pass names.
Differential Revision: https://reviews.llvm.org/D48109
llvm-svn: 334649
This is a recommit of r333506, which was reverted in r333518.
The original commit message is below.
In r325551 many calls of malloc/calloc/realloc were replaces with calls of
their safe counterparts defined in the namespace llvm. There functions
generate crash if memory cannot be allocated, such behavior facilitates
handling of out of memory errors on Windows.
If the result of *alloc function were checked for success, the function was
not replaced with the safe variant. In these cases the calling function made
the error handling, like:
T *NewElts = static_cast<T*>(malloc(NewCapacity*sizeof(T)));
if (NewElts == nullptr)
report_bad_alloc_error("Allocation of SmallVector element failed.");
Actually knowledge about the function where OOM occurred is useless. Moreover
having a single entry point for OOM handling is convenient for investigation
of memory problems. This change removes custom OOM errors handling and
replaces them with calls to functions `llvm::safe_*alloc`.
Declarations of `safe_*alloc` are moved to a separate include file, to avoid
cyclic dependency in SmallVector.h
Differential Revision: https://reviews.llvm.org/D47440
llvm-svn: 334344
entries to reach the target. Since these calls don't require type checks,
we can short-circuit them to their real targets, except in cases when they
can be pre-empted.
Differential Revision: https://reviews.llvm.org/D46326
llvm-svn: 333937
and using the latter in DIBuilder::createArtificialType and
DIBuilder::createObjectPointerType methods as well as introducing
mirroring DISubprogram::cloneWithFlags and
DIBuilder::createArtificialSubprogram methods.
The primary goal here is to add createArtificialSubprogram to support
a pass downstream while keeping the method consistent with the
existing ones and making sure we don't encourage changing already
created DI-nodes.
Reviewed By: aprantl
Differential Revision: https://reviews.llvm.org/D47615
llvm-svn: 333806
Summary:
Getelementptr returns a vector of pointers, instead of a single address,
when one or more of its arguments is a vector. In such case it is not
possible to simplify the expression by inserting a bitcast of operand(0)
into the destination type, as it will create a bitcast between different
sizes.
Reviewers: majnemer, mkuper, mssimpso, spatel
Reviewed By: spatel
Subscribers: lebedev.ri, llvm-commits
Differential Revision: https://reviews.llvm.org/D46379
llvm-svn: 333783
As noted by Adrian on llvm-commits, PrintHTMLEscaped and PrintEscaped in
StringExtras did not conform to the LLVM coding guidelines. This commit
rectifies that.
llvm-svn: 333669
- Make eraseMetadata return whether it changed something
- Wire getMetadata for a single MDNode efficiently into the attachment
map
- Add hasMetadata, which is less weird than checking getMetadata ==
nullptr on a multimap.
Use it to simplify code.
llvm-svn: 333649
Summary:
Creating the IRBuilder methods:
CreateElementUnorderedAtomicMemSet
CreateElementUnorderedAtomicMemMove
These mirror the methods that create calls to the regular (non-atomic) memmove and
memset intrinsics.
llvm-svn: 333588
This is a recommit of r333390, which was reverted in r333395, because it
caused cyclic dependency when building shared library `LLVMDemangle.so`.
In this commit `ItaniumDemangler.cpp` was not changed.
The original commit message is below.
In r325551 many calls of malloc/calloc/realloc were replaces with calls of
their safe counterparts defined in the namespace llvm. There functions
generate crash if memory cannot be allocated, such behavior facilitates
handling of out of memory errors on Windows.
If the result of *alloc function were checked for success, the function was
not replaced with the safe variant. In these cases the calling function made
the error handling, like:
T *NewElts = static_cast<T*>(malloc(NewCapacity*sizeof(T)));
if (NewElts == nullptr)
report_bad_alloc_error("Allocation of SmallVector element failed.");
Actually knowledge about the function where OOM occurred is useless. Moreover
having a single entry point for OOM handling is convenient for investigation
of memory problems. This change removes custom OOM errors handling and
replaces them with calls to functions `llvm::safe_*alloc`.
Declarations of `safe_*alloc` are moved to a separate include file, to avoid
cyclic dependency in SmallVector.h
Differential Revision: https://reviews.llvm.org/D47440
llvm-svn: 333506
In r325551 many calls of malloc/calloc/realloc were replaces with calls of
their safe counterparts defined in the namespace llvm. There functions
generate crash if memory cannot be allocated, such behavior facilitates
handling of out of memory errors on Windows.
If the result of *alloc function were checked for success, the function was
not replaced with the safe variant. In these cases the calling function made
the error handling, like:
T *NewElts = static_cast<T*>(malloc(NewCapacity*sizeof(T)));
if (NewElts == nullptr)
report_bad_alloc_error("Allocation of SmallVector element failed.");
Actually knowledge about the function where OOM occurred is useless. Moreover
having a single entry point for OOM handling is convenient for investigation
of memory problems. This change removes custom OOM errors handling and
replaces them with calls to functions `llvm::safe_*alloc`.
Declarations of `safe_*alloc` are moved to a separate include file, to avoid
cyclic dependency in SmallVector.h
Differential Revision: https://reviews.llvm.org/D47440
llvm-svn: 333390
We have unmasked intrinsics now and wrap them with a select. This is a net reduction of 36 intrinsics from before the unmasked intrinsics were added.
llvm-svn: 333388
Summary:
Implements AsmWriter support for printing the module summary index to
assembly with the format discussed in the RFC "LLVM Assembly format for
ThinLTO Summary".
Implements just enough of the parsing support to recognize and ignore
the summary entries. As agreed in the RFC thread, this will be the
behavior when assembling the IR. A follow on change will implement
parsing/assembling of the summary entries for use by tools that
currently build the summary index from bitcode.
Reviewers: dexonsmith, pcc
Subscribers: inglorion, eraman, steven_wu, dblaikie, llvm-commits
Differential Revision: https://reviews.llvm.org/D46699
llvm-svn: 333335
This restructuring was suggested in the review for D46699, which
prepares the linkage type printer for use in printing the ThinLTO
summary index (where we want to print "external" and also don't
want a space after the linkage type as it is printed by the caller).
llvm-svn: 333281
Currently the iteration order of OnTheFlyManagers is not deterministic
between executions, which means some of test/Other/opt-*-pipeline.ll
tests fail non-deterministically if an additional on-the-fly manager is
added, as in D45330.
By using MapVector, we always iterate in the insertion order. As we are
not removing elements, there shouldn't be a performance hit, except that
we store an additional vector with the keys.
Reviewers: efriedma, chandlerc, pcc, jhenderson
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D47317
llvm-svn: 333231
Reassociation of math ops in some contexts (especially vector contexts)
has generally only been happening when the 'fast' FMF was set. This
enables reassoication when only the finer grained controls 'reassoc' and
'nsz' are set.
Differential Revision: https://reviews.llvm.org/D47335
llvm-svn: 333221
SafepointIRVerifier crashed while traversing blocks without a DomTreeNode.
This could happen with a custom pipeline or when some optional passes were skipped by OptBisect.
SafepointIRVerifier is fixed to traverse basic blocks that are reachable from entry. Test are added.
Patch Author: Yevgeny Rouban!
Reviewers: anna, reames, dneilson, DaniilSuchkov, skatkov
Reviewed By: reames
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D47011
llvm-svn: 333063
This removes 6 intrinsics since we no longer need separate mask and maskz intrinsics.
Differential Revision: https://reviews.llvm.org/D47124
llvm-svn: 332890
Summary: Add LLVMDIBuilderCreateObjCIVar, LLVMDIBuilderCreateObjCProperty, and LLVMDIBuilderCreateInheritance to allow declaring metadata for Objective-C class hierarchies and their associated properties and instance variables.
Reviewers: whitequark, deadalnix
Reviewed By: whitequark
Subscribers: harlanhaskins, llvm-commits
Differential Revision: https://reviews.llvm.org/D47123
llvm-svn: 332850
Summary: Add wrappers for a module's alias iterators and a getter and setter for the aliasee value.
Reviewers: whitequark, deadalnix
Reviewed By: whitequark
Subscribers: llvm-commits, harlanhaskins
Differential Revision: https://reviews.llvm.org/D46808
llvm-svn: 332826
Summary:
- Provide LLVMGetValueName2 and LLVMSetValueName2 that return and take the length of the provided C string respectively
- Deprecate LLVMGetValueName and LLVMSetValueName
Reviewers: whitequark, deadalnix
Reviewed By: whitequark
Subscribers: llvm-commits, harlanhaskins
Differential Revision: https://reviews.llvm.org/D46890
llvm-svn: 332810
The casts in the delta computation for size remarks should have
been static casts. This fixes that.
Thanks to Dávid Bolvanský for pointing that out.
llvm-svn: 332758
This patch adds a remark which tells the user when a pass changes the number of
IR instructions in a module.
It can be enabled by using -Rpass-analysis=size-info.
The point of this is to make it easier to collect statistics on how passes
modify programs in terms of code size. This is similar in concept to timing
reports, but using a remark-based interface makes it easy to diff changes over
multiple compilations of the same program.
By adding functionality like this, we can see
* Which passes impact code size the most
* How passes impact code size at different optimization levels
* Which pass might have contributed the most to an overall code size
regression
The patch lives in the legacy pass manager, but since it's simply emitting
remarks, it shouldn't be too difficult to adapt the functionality to the new
pass manager as well. This can also be adapted to handle MachineInstr counts in
code gen passes.
https://reviews.llvm.org/D38768
llvm-svn: 332739
entries to reach the target. Since these calls don't require type checks,
we can short-circuit them to their real targets.
Differential Revision: https://reviews.llvm.org/D46326
llvm-svn: 332610
r332057 introduced distance() for ranges. Based on post-commit feedback,
this renames distance() to size(). The new size() is also only enabled
when the operation is O(1).
Differential Revision: https://reviews.llvm.org/D46976
llvm-svn: 332551
This adds a -debugify-each mode to opt which, when enabled, wraps each
{Module,Function}Pass in a pipeline with logic to add, check, and strip
synthetic debug info for testing purposes.
This mode can be used to test complex pipelines for debug info bugs, or
to collect statistics about the number of debug values & locations lost
throughout various stages of a pipeline.
Patch by Son Tuan Vu!
Differential Revision: https://reviews.llvm.org/D46525
llvm-svn: 332312
The DEBUG() macro is very generic so it might clash with other projects.
The renaming was done as follows:
- git grep -l 'DEBUG' | xargs sed -i 's/\bDEBUG\s\?(/LLVM_DEBUG(/g'
- git diff -U0 master | ../clang/tools/clang-format/clang-format-diff.py -i -p1 -style LLVM
- Manual change to APInt
- Manually chage DOCS as regex doesn't match it.
In the transition period the DEBUG() macro is still present and aliased
to the LLVM_DEBUG() one.
Differential Revision: https://reviews.llvm.org/D43624
llvm-svn: 332240
Summary:
The first foray into merging debug info into the echo tests.
- Add bindings to Module::getModuleFlagsMetadata() in the form of LLVMCopyModuleFlagsMetadata
- Add the opaque type LLVMModuleFlagEntry to represent Module::ModuleFlagEntry
- Add accessors for LLVMModuleFlagEntry's behavior, key, and metadata node.
Reviewers: whitequark, deadalnix
Reviewed By: whitequark
Subscribers: aprantl, JDevlieghere, llvm-commits, harlanhaskins
Differential Revision: https://reviews.llvm.org/D46792
llvm-svn: 332219
This commit adds a wrapper for std::distance() which works with ranges.
As it would be a common case to write `distance(predecessors(BB))`, this
also introduces `pred_size()` and `succ_size()` helpers to make that
easier to write.
Differential Revision: https://reviews.llvm.org/D46668
llvm-svn: 332057
Summary: Move and correct LLVMDIBuilderCreateTypedef. This is the last API in DIBuilderBindings.h, so it is being removed and the C API will now be re-exported from IRBindings.h.
Reviewers: whitequark, harlanhaskins, deadalnix
Reviewed By: whitequark
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D46725
llvm-svn: 332041
Summary:
- Adds getters for the line, column, and scope of a DILocation
- Adds getters for the name, size in bits, offset in bits, alignment in bits, line, and flags of a DIType
Reviewers: whitequark, harlanhaskins, deadalnix
Reviewed By: whitequark
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D46627
llvm-svn: 332014
In order to set breakpoints on labels and list source code around
labels, we need collect debug information for labels, i.e., label
name, the function label belong, line number in the file, and the
address label located. In order to keep these information in LLVM
IR and to allow backend to generate debug information correctly.
We create a new kind of metadata for labels, DILabel. The format
of DILabel is
!DILabel(scope: !1, name: "foo", file: !2, line: 3)
We hope to keep debug information as much as possible even the
code is optimized. So, we create a new kind of intrinsic for label
metadata to avoid the metadata is eliminated with basic block.
The intrinsic will keep existing if we keep it from optimized out.
The format of the intrinsic is
llvm.dbg.label(metadata !1)
It has only one argument, that is the DILabel metadata. The
intrinsic will follow the label immediately. Backend could get the
label metadata through the intrinsic's parameter.
We also create DIBuilder API for labels to be used by Frontend.
Frontend could use createLabel() to allocate DILabel objects, and use
insertLabel() to insert llvm.dbg.label intrinsic in LLVM IR.
Differential Revision: https://reviews.llvm.org/D45024
Patch by Hsiangkai Wang.
llvm-svn: 331841
Inspired by r331508, I did a grep and found these.
Mostly just change from dyn_cast to cast. Some cases also showed a dyn_cast result being converted to bool, so those I changed to isa.
llvm-svn: 331577
Summary:
When we create a fragment expression, and there already is an
old fragment expression, we assert that the new fragment is
within the range for the old fragment.
If for example the old fragment expression says that we
describe bit 10-16 of a variable (Offset=10, Size=6),
and we now want to create a new fragment expression only
describing bit 3-6 of the original value, then the resulting
fragment expression should have Offset=13, Size=3.
The assert is supposed to catch if the resulting fragment
expression is outside the range for the old fragment. However,
it used to verify that the Offset+Size of the new fragment was
smaller or equal than Offset+Size for the old fragment. What
we really want to check is that Offset+Size of the new fragment
is smaller than the Size of the old fragment.
Reviewers: aprantl, vsk
Reviewed By: aprantl
Subscribers: davide, llvm-commits, JDevlieghere
Differential Revision: https://reviews.llvm.org/D46391
llvm-svn: 331465
This is a follow-up to r331272.
We've been running doxygen with the autobrief option for a couple of
years now. This makes the \brief markers into our comments
redundant. Since they are a visual distraction and we don't want to
encourage more \brief markers in new code either, this patch removes
them all.
Patch produced by
for i in $(git grep -l '\@brief'); do perl -pi -e 's/\@brief //g' $i & done
https://reviews.llvm.org/D46290
llvm-svn: 331275
We've been running doxygen with the autobrief option for a couple of
years now. This makes the \brief markers into our comments
redundant. Since they are a visual distraction and we don't want to
encourage more \brief markers in new code either, this patch removes
them all.
Patch produced by
for i in $(git grep -l '\\brief'); do perl -pi -e 's/\\brief //g' $i & done
Differential Revision: https://reviews.llvm.org/D46290
llvm-svn: 331272
See r331124 for how I made a list of files missing the include.
I then ran this Python script:
for f in open('filelist.txt'):
f = f.strip()
fl = open(f).readlines()
found = False
for i in xrange(len(fl)):
p = '#include "llvm/'
if not fl[i].startswith(p):
continue
if fl[i][len(p):] > 'Config':
fl.insert(i, '#include "llvm/Config/llvm-config.h"\n')
found = True
break
if not found:
print 'not found', f
else:
open(f, 'w').write(''.join(fl))
and then looked through everything with `svn diff | diffstat -l | xargs -n 1000 gvim -p`
and tried to fix include ordering and whatnot.
No intended behavior change.
llvm-svn: 331184
Summary: Add bindings to create import declarations for modules, functions, types, and other entities. This wraps the conveniences available in the existing DIBuilder API, but these seem C++-specific.
Reviewers: whitequark, harlanhaskins, deadalnix
Reviewed By: whitequark
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D46167
llvm-svn: 331123
Summary:
* rL328953 does not include bindings for LLVMDIBuilderCreateClassType and LLVMDIBuilderCreateBitFieldMemberType despite declaring their prototypes. Provide these bindings now.
* Switch to more precise types with specific numeric limits matching the DIBuilder's C++ API.
Reviewers: harlanhaskins, whitequark, deadalnix
Reviewed By: whitequark
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D46168
llvm-svn: 331114
This patch adds support for fragment expressions
TryToShrinkGlobalToBoolean() which were previously just dropped.
Thanks to Reid Kleckner for providing me a reproducer!
llvm-svn: 331086
Summary:
The value tracking analysis uses function alignment to infer that the
least significant bits of function pointers are known to be zero.
Unfortunately, this is not correct for ARM targets: the least
significant bit of a function pointer stores the ARM/Thumb state
information (i.e., the LSB is set for Thumb functions and cleared for
ARM functions).
The original approach (https://reviews.llvm.org/D44781) introduced a
new field for function pointer alignment in the DataLayout structure
to address this. But it seems unlikely that optimizations based on
function pointer alignment would bring much benefit in practice to
justify the additional maintenance burden, so this patch simply
assumes that function pointer alignment is always unknown.
Reviewers: javed.absar, efriedma
Reviewed By: efriedma
Subscribers: kristof.beyls, llvm-commits, hfinkel, rogfer01
Differential Revision: https://reviews.llvm.org/D46110
llvm-svn: 331025
Summary:
The old comment referred to llvm/IR/Writer.h which doesn't longer exist.
This patch replaces it with an up-to-date description of AsmWriter library.
Patch by Alex Yursha.
Reviewers: gribozavr, vlad.tsyrklevich
Reviewed By: vlad.tsyrklevich
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D45895
llvm-svn: 330962
Virtually all other tablegen outputs are called .inc, not .gen, so rename these two too for consistency.
No behavior change.
https://reviews.llvm.org/D46058
llvm-svn: 330843
Summary: Wrap LLVMDIBuilderCreateAutoVariable, LLVMDIBuilderCreateParameterVariable, LLVMDIBuilderCreateExpression, and move and correct LLVMDIBuilderInsertDeclareBefore and LLVMDIBuilderInsertDeclareAtEnd from the Go bindings to the C bindings.
Reviewers: harlanhaskins, whitequark, deadalnix
Reviewed By: harlanhaskins, whitequark
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D45928
llvm-svn: 330555
This is the patch that lowers x86 intrinsics to native IR
in order to enable optimizations. The patch also includes folding
of previously missing saturation patterns so that IR emits the same
machine instructions as the intrinsics.
Patch by tkrupa
Differential Revision: https://reviews.llvm.org/D44785
llvm-svn: 330322
LLVMDump* functions are available in Release builds too.
Patch by Brenton Bostick.
Differential Revision: https://reviews.llvm.org/D44600
llvm-svn: 330189
Apparently, DebugInfoFinder::processCompileUnit doesn't process all
of the possible kinds of DIImportedEntit'ies, e.g. DIGlobalVariable's.
Previously introduced `llvm_unreachable` is therefore incorrect.
Removing it here.
llvm-svn: 330167
The code uses the index of the last element in the sorted array to determine the maximum size needed for the vector. But if the last index is a FunctionIndex(~0), attrIdxToArrayIdx will return 0 and the vector will have size 1. If there are any indices before FunctionIndex, those values would return a value larger than 0 from attrIdxToArrayIdx. So in this case we need to look in front of the FunctionIndex to get the true size needed.
Differential Revision: https://reviews.llvm.org/D45632
llvm-svn: 330136
As demonstrated by the regression tests added in this patch, the
following cases are valid cases:
1. A Function with no DISubprogram attached, but various debug info
related to its instructions, coming, for instance, from an inlined
function, also defined somewhere else in the same module;
2. ... or coming exclusively from the functions inlined and eliminated
from the module entirely.
The ValueMap shared between CloneFunctionInto calls within CloneModule
needs to contain identity mappings for all of the DISubprogram's to
prevent them from being duplicated by MapMetadata / RemapInstruction
calls, this is achieved via DebugInfoFinder collecting all the
DISubprogram's. However, CloneFunctionInto was missing calls into
DebugInfoFinder for functions w/o DISubprogram's attached, but still
referring DISubprogram's from within (case 1). This patch fixes that.
The fix above, however, exposes another issue: if a module contains a
DISubprogram referenced only indirectly from other debug info
metadata, but not attached to any Function defined within the module
(case 2), cloning such a module causes a DICompileUnit duplication: it
will be moved in indirecty via a DISubprogram by DebugInfoFinder first
(because of the first bug fix described above), without being
self-mapped within the shared ValueMap, and then will be copied during
named metadata cloning. So this patch makes sure DebugInfoFinder
visits DICompileUnit's referenced from DISubprogram's as it goes w/o
re-processing llvm.dbg.cu list over and over again for every function
cloned, and makes sure that CloneFunctionInto self-maps
DICompileUnit's referenced from the entire function, not just its own
DISubprogram attached that may also be missing.
The most convenient way of tesing CloneModule I found is to rely on
CloneModule call from `opt -run-twice`, instead of writing tedious
unit tests. That feature has a couple of properties that makes it hard
to use for this purpose though:
1. CloneModule doesn't copy source filename, making `opt -run-twice`
report it as a difference.
2. `opt -run-twice` does the second run on the original module, not
its clone, making the result of cloning completely invisible in opt's
actual output with and without `-run-twice` both, which directly
contradicts `opt -run-twice`s own error message.
This patch fixes this as well.
Reviewed By: aprantl
Reviewers: loladiro, GorNishanov, espindola, echristo, dexonsmith
Subscribers: vsk, debug-info, JDevlieghere, llvm-commits
Differential Revision: https://reviews.llvm.org/D45593
llvm-svn: 330069
This completes the work started in r329604 and r329605 when we changed clang to no longer use the intrinsics.
We lost some InstCombine SimplifyDemandedBit optimizations through this change as we aren't able to fold 'and', bitcast, shuffle very well.
llvm-svn: 329990
This lifts a restriction on DILocation::getMergedLocation(), allowing it
to create merged locations for instructions other than calls.
Instruction::applyMergedLocation() now defaults to creating merged
locations for all instructions.
The default behavior of getMergedLocation() is unchanged: callers which
invoke it directly are unaffected.
This change will enable a follow-up Mem2Reg fix which improves crash
reporting.
Differential Revision: https://reviews.llvm.org/D45396
llvm-svn: 329955
The 128/256-bit versions were no longer used by clang. It uses the legacy SSE/AVX2 version and a select. The 512-bit was changed to the same for consistency.
llvm-svn: 329774
Summary:
The verification rules for the intrinsics for atomic memcpy, atomic memmove,
and atomic memset are basically code clones. This change merges their verification
rules into a single block to remove duplication.
llvm-svn: 329753
These are were previously grouped in small groups of similarish intrinsics. But all the intrinsics have the same number of arguments and the same order. So we can move them all into a larger group for handling.
llvm-svn: 329549
Summary:
- Add a missing getter for module-level inline assembly
- Add a missing append function for module-level inline assembly
- Deprecate LLVMSetModuleInlineAsm and replace it with LLVMSetModuleInlineAsm2 which takes an explicit length parameter
- Deprecate LLVMConstInlineAsm and replace it with LLVMGetInlineAsm, a function that allows passing a dialect and is not mis-classified as a constant operation
Reviewers: whitequark, deadalnix
Reviewed By: whitequark
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D45346
llvm-svn: 329369
r327219 added wrappers to std::sort which randomly shuffle the container before
sorting. This will help in uncovering non-determinism caused due to undefined
sorting order of objects having the same key.
To make use of that infrastructure we need to invoke llvm::sort instead of
std::sort.
Note: This patch is one of a series of patches to replace *all* std::sort to
llvm::sort. Refer D44363 for a list of all the required patches.
llvm-svn: 329353
This patch introduces a way to set custom OptPassGate instances to LLVMContext.
A new instance field OptBisector and a new method setOptBisect() are added
to the LLVMContext classes. These changes allow to set a custom OptBisect class
that can make its own decisions on skipping optional passes.
Another important feature of this change is ability to set different instances
of OptPassGate to different LLVMContexts. So the different contexts can be used
independently in several compiling threads of one process.
One unit test is added.
Patch by Yevgeny Rouban.
Reviewers: andrew.w.kaylor, fedor.sergeev, vsk, dberlin, Eugene.Zelenko, reames, skatkov
Reviewed By: andrew.w.kaylor, fedor.sergeev
Differential Revision: https://reviews.llvm.org/D44464
llvm-svn: 329267
Summary:
Introduce the ShadowCallStack function attribute. It's added to
functions compiled with -fsanitize=shadow-call-stack in order to mark
functions to be instrumented by a ShadowCallStack pass to be submitted
in a separate change.
Reviewers: pcc, kcc, kubamracek
Reviewed By: pcc, kcc
Subscribers: cryptoad, mehdi_amini, javed.absar, llvm-commits, kcc
Differential Revision: https://reviews.llvm.org/D44800
llvm-svn: 329108
This patch adds a set of unstable C API bindings to the DIBuilder interface for
creating structure, function, and aggregate types.
This patch also removes the existing implementations of these functions from
the Go bindings and updates the Go API to fit the new C APIs.
llvm-svn: 328953
Summary:
Previous revision caused a leak in the echo test that got caught by the ASAN bots because of missing free of the handlers array and was reverted in r328759. Resubmitting the patch with that correction.
Add support for cleanupret, catchret, catchpad, cleanuppad and catchswitch and their associated accessors.
Test is modified from SimplifyCFG because it contains many diverse usages of these instructions.
Reviewers: whitequark, deadalnix
Reviewed By: whitequark
Subscribers: llvm-commits, vlad.tsyrklevich
Differential Revision: https://reviews.llvm.org/D45100
llvm-svn: 328883
Currently EVT is in the IR layer only because of Function.cpp needing a very small piece of the functionality of EVT::getEVTString(). The rest of EVT is used in codegen making CodeGen a better place for it.
The previous code converted a Type* to EVT and then called getEVTString. This was only expected to handle the primitive types from Type*. Since there only a few primitive types, we can just print them as strings directly.
Differential Revision: https://reviews.llvm.org/D45017
llvm-svn: 328806
Summary:
Add support for cleanupret, catchret, catchpad, cleanuppad and catchswitch and their associated accessors.
Test is modified from SimplifyCFG because it contains many diverse usages of these instructions.
Reviewers: whitequark, deadalnix, echristo
Reviewed By: echristo
Subscribers: llvm-commits, harlanhaskins
Differential Revision: https://reviews.llvm.org/D44496
llvm-svn: 328759
Summary:
This is an NFC refactoring of the OptBisect class to split it into an optional pass gate interface used by LLVMContext and the Optional Pass Bisector (OptBisect) used for debugging of optional passes.
This refactoring is needed for D44464, which introduces setOptPassGate() method to allow implementations other than OptBisect.
Patch by Yevgeny Rouban.
Reviewers: andrew.w.kaylor, fedor.sergeev, vsk, dberlin, Eugene.Zelenko, reames, skatkov
Reviewed By: fedor.sergeev
Differential Revision: https://reviews.llvm.org/D44821
llvm-svn: 328637
Value::printAsOperand has been scanning the entire module just to
print a single value as an operand, regardless being asked to print a
type or not at all, and regardless really needing to scan the module
to print a type.
It made some of the users of the method exceptionally slow on large
IR-modules (or large MIR-files with large IR-modules embedded).
This patch defers scanning a module looking for struct types, mostly
numbered struct types, as much as possible, speeding up those users
w/o changing any APIs at all.
See speedup examples below:
Release Build:
# 83 seconds -> 5.5 seconds
time ./bin/llc -start-before=irtranslator -stop-after=irtranslator \
-global-isel -global-isel-abort=2 -simplify-mir sqlite3.O0.ll -o \
sqlite3.O0.ll.regbankselected.mir
# 133 seconds -> 6.2 seconds
time ./bin/opt sqlite3.O0.ll -dot-cfg -disable-output
Release + Asserts Build:
# 95 seconds -> 5.5 seconds
time ./bin/llc -start-before=irtranslator -stop-after=irtranslator \
-global-isel -global-isel-abort=2 -simplify-mir sqlite3.O0.ll -o \
sqlite3.O0.ll.regbankselected.mir
# 146 seconds -> 6.2 seconds
time ./bin/opt sqlite3.O0.ll -dot-cfg -disable-output
# 1096 seconds -> 553 seconds
time ./bin/llc -debug-only=isel -fast-isel=false -stop-after=isel \
sqlite3.O0.ll -o /dev/null 2> err
where sqlite3.O0.ll is non-optimized IR produced from
sqlite-amalgamation (http://sqlite.org/download.html), which is entire
SQLite3 implementation in a single C-file.
Benchmarked on 4-cores / 8 threads PCI-E SSD iMac running macOS
Reviewers: dexonsmith, bkramer, void, chandlerc, aditya_nandakumar, dsanders, qcolombet,
Reviewed By: bogner
Subscribers: thegameg, llvm-commits
Differential Revision: https://reviews.llvm.org/D44132
llvm-svn: 328246
Summary:
When building with libFuzzer, converting control flow to selects or
obscuring the original operands of CMPs reduces the effectiveness of
libFuzzer's heuristics.
This patch provides an attribute to disable or modify certain optimizations
for optimal fuzzing signal.
Provides a less aggressive alternative to https://reviews.llvm.org/D44057.
Reviewers: vitalybuka, davide, arsenm, hfinkel
Reviewed By: vitalybuka
Subscribers: junbuml, mehdi_amini, wdng, javed.absar, hiraditya, llvm-commits, kcc
Differential Revision: https://reviews.llvm.org/D44232
llvm-svn: 328214
X86 Supports Indirect Branch Tracking (IBT) as part of Control-Flow Enforcement Technology (CET).
IBT instruments ENDBR instructions used to specify valid targets of indirect call / jmp.
The `nocf_check` attribute has two roles in the context of X86 IBT technology:
1. Appertains to a function - do not add ENDBR instruction at the beginning of the function.
2. Appertains to a function pointer - do not track the target function of this pointer by adding nocf_check prefix to the indirect-call instruction.
This patch implements `nocf_check` context for Indirect Branch Tracking.
It also auto generates `nocf_check` prefixes before indirect branchs to jump tables that are guarded by range checks.
Differential Revision: https://reviews.llvm.org/D41879
llvm-svn: 327767
Now the Windows mangling modes ('w' and 'x') do not do any mangling for
symbols starting with '?'. This means that clang can stop adding the
hideous '\01' leading escape. This means LLVM debug logs are less likely
to contain ASCII escape characters and it will be easier to copy and
paste MS symbol names from IR.
Finally.
For non-Windows platforms, names starting with '?' still get IR
mangling, so once clang stops escaping MS C++ names, we will get extra
'_' prefixing on MachO. That's fine, since it is currently impossible to
construct a triple that uses the MS C++ ABI in clang and emits macho
object files.
Differential Revision: https://reviews.llvm.org/D7775
llvm-svn: 327734
Summary:
The old bindings should have used an enum instead of a boolean. This
deprecates LLVMHasUnnamedAddr and LLVMSetUnnamedAddr , replacing them
with LLVMGetUnnamedAddress and LLVMSetUnnamedAddress respectively that do.
Though it is unlikely LLVM will gain more supported global value linker
hints, the new API can scale to accommodate this.
Reviewers: deadalnix, whitequark
Reviewed By: whitequark
Subscribers: llvm-commits, harlanhaskins
Differential Revision: https://reviews.llvm.org/D43448
llvm-svn: 327479
With the updated LangRef ( D44216 / rL327138 ) in place, we can proceed with more constant folding.
I'm intentionally taking the conservative path here: no matter what the constant or the FMF, we can
always fold to NaN. This is because the undef operand can be chosen as NaN, and in our simplified
default FP env, nothing else happens - NaN just propagates to the result. If we find some way/need
to propagate undef instead, that can be added subsequently.
The tests show that we always choose the same quiet NaN constant (0x7FF8000000000000 in IR text).
There were suggestions to improve that with a 'NaN' string token or not always print a 64-bit hex
value, but those are independent changes. We might also consider setting/propagating the payload of
NaN constants as an enhancement.
Differential Revision: https://reviews.llvm.org/D44308
llvm-svn: 327208
The retpoline mitigation for variant 2 of CVE-2017-5715 inhibits the
branch predictor, and as a result it can lead to a measurable loss of
performance. We can reduce the performance impact of retpolined virtual
calls by replacing them with a special construct known as a branch
funnel, which is an instruction sequence that implements virtual calls
to a set of known targets using a binary tree of direct branches. This
allows the processor to speculately execute valid implementations of the
virtual function without allowing for speculative execution of of calls
to arbitrary addresses.
This patch extends the whole-program devirtualization pass to replace
certain virtual calls with calls to branch funnels, which are
represented using a new llvm.icall.jumptable intrinsic. It also extends
the LowerTypeTests pass to recognize the new intrinsic, generate code
for the branch funnels (x86_64 only for now) and lay out virtual tables
as required for each branch funnel.
The implementation supports full LTO as well as ThinLTO, and extends the
ThinLTO summary format used for whole-program devirtualization to
support branch funnels.
For more details see RFC:
http://lists.llvm.org/pipermail/llvm-dev/2018-January/120672.html
Differential Revision: https://reviews.llvm.org/D42453
llvm-svn: 327163
These are uncontroversial and independent of a proposed LangRef edits (D44216).
I tried to fix tests that would fold away:
rL327004
rL327028
rL327030
rL327034
I'm not sure if the Reassociate tests are meaningless yet, but they probably will be
as we add more folds, so if anyone has suggestions or wants to fix those, please do.
Differential Revision: https://reviews.llvm.org/D44258
llvm-svn: 327058
Summary:
This patch adds verification logic for DICompositeType vectors, ensuring that they only have one element, and that element is of type subrange.
This patch complements https://reviews.llvm.org/D44048
Reviewers: aprantl
Reviewed By: aprantl
Subscribers: JDevlieghere, llvm-commits
Tags: #debug-info
Differential Revision: https://reviews.llvm.org/D44262
llvm-svn: 327048
This is NFC for the moment (and independent of any potential NaN semantic
controversy). Besides making the code in InstSimplify easier to read, the
motivation is to eventually allow undef elements in vector constants to
match too. A proposal to add the base logic for that is in D43792.
llvm-svn: 326600
If we are only truncating bits from the extend we should be able to just use a smaller extend.
If we are truncating more than the extend we should be able to just use a fptrunc since the presense of the fpextend shouldn't affect rounding.
Differential Revision: https://reviews.llvm.org/D43970
llvm-svn: 326595
Function::lookupIntrinsicID is somewhat forgiving as it comes to
overloaded intrinsics' names: it returns an ID as soon as the name
provided has a prefix that matches a registered intrinsic's name w/o
actually checking that the rest of the name encodes all the concrete arg
types, let alone that those types are compatible with the intrinsic's
definition.
That's probably fine and comes in handy in MIR serialization: we don't
care about IR types at MIR level and every intrinsic should be
selectable based on its ID and low-level types (LLTs) of its operands,
including the overloaded ones, so there is no point in serializing
mangled IR types as part of the intrinsic's name.
However, lookupIntrinsicID is somewhat inconsistent in its forgiveness:
if the name provided is actually an exact match, it will refuse to
return the ID if the intrinsic is overloaded. There is probably no
real reason for that and it renders MIRParser incapable to deserialize
MIR MIRPrinter serialized.
This commit fixes it.
Reviewers: rnk, aditya_nandakumar, qcolombet, thegameg, dsanders,
marcello.maggioni
Reviewed By: bogner
Subscribers: javed.absar, llvm-commits
Differential Revision: https://reviews.llvm.org/D43267
llvm-svn: 326387
Removes verifyDomTree, using assert(verify()) everywhere instead, and
changes verify a little to always run IsSameAsFreshTree first in order
to print good output when we find errors. Also adds verifyAnalysis for
PostDomTrees, which will allow checking of PostDomTrees it the same way
we check DomTrees and MachineDomTrees.
Differential Revision: https://reviews.llvm.org/D41298
llvm-svn: 326315
In DWARF v5 the Line Number Program Header is extensible, allowing values with
new content types. In this extension a content type is added,
DW_LNCT_LLVM_source, which contains the embedded source code of the file.
Add new optional attribute for !DIFile IR metadata called source which contains
source text. Use this to output the source to the DWARF line table of code
objects. Analogously extend METADATA_FILE in Bitcode and .file directive in ASM
to support optional source.
Teach llvm-dwarfdump and llvm-objdump about the new values. Update the output
format of llvm-dwarfdump to make room for the new attribute on file_names
entries, and support embedded sources for the -source option in llvm-objdump.
Differential Revision: https://reviews.llvm.org/D42765
llvm-svn: 325970
Bjorn Pettersson