There are vmsle(u).vx and vmsle(u).vi instructions, but there is
only vmslt(u).vx and no vmslt(u).vi. vmslt(u).vi can be emulated
for some immediates by decrementing the immediate and using vmsle(u).vi.
To avoid the user needing to know about this, this patch does this
conversion.
The assembler does the same thing for vmslt(u).vi and vmsge(u).vi
pseudoinstructions. There is no vmsge(u).vx intrinsic or
instruction so this patch is limited to vmslt(u).
Reviewed By: frasercrmck
Differential Revision: https://reviews.llvm.org/D94070
With the i32 these patterns will only fire on RV32, but they
don't look RV32 specific.
Reviewed By: lenary
Differential Revision: https://reviews.llvm.org/D93843
We could expand vmsge{u}.vx pseudo instructions in RISCVAsmParser.
It is more appropriate to expand it before encoding.
Differential Revision: https://reviews.llvm.org/D93968
Define intrinsics:
1. vfcvt.xu.f.v/vfcvt.x.f.v
2. vfcvt.rtz.xu.f.v/vfcvt.rtz.x.f.v
3. vfcvt.f.xu.v/vfcvt.f.x.v
We work with @rogfer01 from BSC to come out this patch.
Authored-by: Roger Ferrer Ibanez <rofirrim@gmail.com>
Co-Authored-by: Monk Chiang <monk.chiang@sifive.com>
Differential Revision: https://reviews.llvm.org/D93933
Define intrinsics:
1. vfncvt.xu.f.w/vfncvt.x.f.w
2. vfncvt.rtz.xu.f.w/vfncvt.rtz.x.f.w
3. vfncvt.f.xu.w/vfncvt.f.x.w
4. vfncvt.f.f.w/vfncvt.rod.f.f.w
We work with @rogfer01 from BSC to come out this patch.
Authored-by: Roger Ferrer Ibanez <rofirrim@gmail.com>
Co-Authored-by: Monk Chiang <monk.chiang@sifive.com>
Differential Revision: https://reviews.llvm.org/D93932
Define intrinsics:
1. vfwcvt.xu.f.v/vfwcvt.x.f.v
2. vfwcvt.rtz.xu.f.v/vfwcvt.rtz.x.f.v
3. vfwcvt.f.xu.v/vfwcvt.f.x.v
4. vfwcvt.f.f.v
We work with @rogfer01 from BSC to come out this patch.
Authored-by: Roger Ferrer Ibanez <rofirrim@gmail.com>
Co-Authored-by: Monk Chiang <monk.chiang@sifive.com>
Differential Revision: https://reviews.llvm.org/D93855
This patch defines vcompress intrinsics and lower to V instructions.
We work with @rogfer01 from BSC to come out this patch.
Authored-by: Roger Ferrer Ibanez <rofirrim@gmail.com>
Co-Authored-by: ShihPo Hung <shihpo.hung@sifive.com>
Differential revision: https://reviews.llvm.org/D93809
Define vsext/vzext intrinsics.and lower to V instructions.
Define new fraction register class fields in LMULInfo and a
NoReg to present invalid LMUL register classes.
Authored-by: ShihPo Hung <shihpo.hung@sifive.com>
Co-Authored-by: Zakk Chen <zakk.chen@sifive.com>
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D93893
This complements the existing RVV ISel patterns for arithmetic, bitwise
and shifts with the remaining operations in those categories: sub, and,
xor, sra.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D93852
If the destination is tied, then user has some control of the
register used for input. They would have the ability to control
the value of any tail elements. By using tail agnostic we take
this option away from them.
Its not clear that the intrinsics are defined such that this isn't
supposed to work. And undisturbed is a valid implementation for agnostic
so code wouldn't even fail to work on all systems if we always used
agnostic.
The vcompress intrinsic is defined to require tail undisturbed so
at minimum we need this for that instruction or need to redefine
the intrinsic.
I've made an exception here for vmv.s.x/fmv.s.f and reduction
instructions which only write to element 0 regardless of the tail
policy. This allows us to keep the agnostic policy on those which
should allow better redundant vsetvli removal.
An enhancement would be to check for undef input and keep the
agnostic policy, but we don't have good test coverage for that yet.
Reviewed By: khchen
Differential Revision: https://reviews.llvm.org/D93878
The spec for these instructions include this note. "The destination register
cannot overlap either the source register or the mask register ('v0') if the
instruction is masked." So we need earlyclobber to enforce this constraint.
I've regenerated the tests with update_llc_test_checks.py to show the
effects of the earlyclobber.
Reviewed By: khchen, frasercrmck
Differential Revision: https://reviews.llvm.org/D93867
Define vmclr.m/vmset.m intrinsics and lower to vmxor.mm/vmxnor.mm.
Ideally all rvv pseudo instructions could be implemented in C header,
but those two instructions don't take an input, codegen can not guarantee
that the source register becomes the same as the destination.
We expand pseduo-v-inst into corresponding v-inst in
RISCVExpandPseudoInsts pass.
Reviewed By: craig.topper, frasercrmck
Differential Revision: https://reviews.llvm.org/D93849
Define those intrinsics and lower to V instructions.
Use update_llc_test_checks.py for viota.m tests to check
earlyclobber is applied correctly.
mask viota.m tests uses the same argument as input and mask for
avoid dependency of D93364.
We work with @rogfer01 from BSC to come out this patch.
Reviewed By: HsiangKai
Differential Revision: https://reviews.llvm.org/D93823
This patch extends the pattern-matching capability of vector-splatted
constants. When illegally-typed constants are legalized they are
canonically sign-extended to XLenVT. This preserves the sign and allows
us to match simm5. If they were zero-extended for whatever reason we'd
lose that ability: e.g. `(i8 -1) -> (XLenVT 255)` would not be matched
under the current logic.
To address this we first manually sign-extend the splatted constant from
the vector element type to int64_t. This preserves the semantics while
removing any implicitly-truncated bits.
The corresponding logic for uimm5 was not updated, the rationale being
that neither sign- nor zero-extending a legal uimm5 immediate should
change that (unless we expect actual "garbage" upper bits).
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D93837
We weren't consistently marking unary instructions as OneInput
and vid.v is really ZeroInput but we had no way to mark that.
This patch improves this by removing the error prone OneInput constraint.
Instead we just always look for the mask in the last operand.
It appears that the "CheckReg" variable used for the check on the broken
instruction was unitialized or garbage because it was also used for
VS1/VS2 constraints. I've scoped the variable locally to each check now.
I've gone through and set NoConstraint on instructions that don't have
a real VMConstraint and don't have a mask as the last operand.
I've also removed the unused enum values in RISCVBaseInfo.h. We
never use them in C++ and we have separate versions in a td file.
Reviewed By: HsiangKai
Differential Revision: https://reviews.llvm.org/D93784
Define vwredsumu/vwredsum/vfwredosum/vfwredsum
We work with @rogfer01 from BSC to come out this patch.
Authored-by: Roger Ferrer Ibanez <rofirrim@gmail.com>
Co-Authored-by: Zakk Chen <zakk.chen@sifive.com>
Differential Revision: https://reviews.llvm.org/D93807
Define vpopc/vfirst intrinsics and lower to V instructions.
We work with @rogfer01 from BSC to come out this patch.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D93795
Define vector mask-register logical intrinsics and lower them
to V instructions. Also define pseudo instructions vmmv.m
and vmnot.m.
We work with @rogfer01 from BSC to come out this patch.
Authored-by: Roger Ferrer Ibanez <rofirrim@gmail.com>
Co-Authored-by: Zakk Chen <zakk.chen@sifive.com>
Differential Revision: https://reviews.llvm.org/D93705
This patch defines vrgather intrinsics and lower to V instructions.
We work with @rogfer01 from BSC to come out this patch.
Authored-by: Roger Ferrer Ibanez <rofirrim@gmail.com>
Co-Authored-by: ShihPo Hung <shihpo.hung@sifive.com>
Differential revision: https://reviews.llvm.org/D93797
integer group:
vredsum/vredmaxu/vredmax/vredminu/vredmin/vredand/vredor/vredxor
float group:
vfredosum/vfredsum/vfredmax/vfredmin
We work with @rogfer01 from BSC to come out this patch.
Authored-by: Roger Ferrer Ibanez <rofirrim@gmail.com>
Co-Authored-by: Zakk Chen <zakk.chen@sifive.com>
Differential Revision: https://reviews.llvm.org/D93746
This patch extends the SDNode ISel support for RVV from only the
vector/vector instructions to include the vector/scalar and
vector/immediate forms.
It uses splat_vector to carry the scalar in each case, except when
XLEN<SEW (RV32 SEW=64) when a custom node `SPLAT_VECTOR_I64` is used for
type-legalization and to encode the fact that the value is sign-extended
to SEW. When the scalar is a full 64-bit value we use a sequence to
materialize the constant into the vector register.
The non-intrinsic ISel patterns have also been split into their own
file.
Authored-by: Roger Ferrer Ibanez <rofirrim@gmail.com>
Co-Authored-by: Fraser Cormack <fraser@codeplay.com>
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D93312
Also include a special case pattern to use vmv.v.x vd, zero when
the argument is 0.0.
Reviewed By: khchen
Differential Revision: https://reviews.llvm.org/D93672
This patch defines vfwmacc, vfwnmacc, vfwmsc, vfwnmsac intrinsics
and lower to V instructions.
We work with @rogfer01 from BSC to come out this patch.
Authored-by: Roger Ferrer Ibanez <rofirrim@gmail.com>
Co-Authored-by: ShihPo Hung <shihpo.hung@sifive.com>
Differential Revision: https://reviews.llvm.org/D93693
Define vmerge/vfmerge intrinsics and lower to V instructions.
Include support for vector-vector vfmerge by vmerge.vvm.
We work with @rogfer01 from BSC to come out this patch.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D93674
Define the vfmin, vfmax IR intrinsics for the respective V instructions.
Authored-by: Roger Ferrer Ibanez <rofirrim@gmail.com>
Co-Authored-by: Evandro Menezes <evandro.menezes@sifive.com>
Differential Revision: https://reviews.llvm.org/D93673
This patch defines vfmadd/vfnmacc, vfmsac/vfnmsac, vfmadd/vfnmadd,
and vfmsub/vfnmsub lower to V instructions.
Authored-by: Roger Ferrer Ibanez <rofirrim@gmail.com>
Co-Authored-by: ShihPo Hung <shihpo.hung@sifive.com>
Differential Revision: https://reviews.llvm.org/D93691
This patch defines vwmacc[u|su|us] intrinsics and lower to V instructions.
We work with @rogfer01 from BSC to come out this patch.
Authored-by: Roger Ferrer Ibanez <rofirrim@gmail.com>
Co-Authored-by: ShihPo Hung <shihpo.hung@sifive.com>
Differential Revision: https://reviews.llvm.org/D93675
This patch enables jump table lowering in the RISC-V backend.
In addition to the test case included, the new lowering was
tested by compiling the OCaml runtime and running it under qemu.
Differential Revision: https://reviews.llvm.org/D92097
Define vector compare intrinsics and lower them to V instructions.
We work with @rogfer01 from BSC to come out this patch.
Authored-by: Roger Ferrer Ibanez <rofirrim@gmail.com>
Co-Authored-by: Hsiangkai Wang <kai.wang@sifive.com>
Differential Revision: https://reviews.llvm.org/D93368
Define vleff intrinsics and lower to V instructions.
We work with @rogfer01 from BSC to come out this patch.
Authored-by: Roger Ferrer Ibanez <rofirrim@gmail.com>
Co-Authored-by: Zakk Chen <zakk.chen@sifive.com>
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D93516
This defines vmadd, vmacc, vnmsub, and vnmsac intrinsics and
lower to V instructions.
Authored-by: Roger Ferrer Ibanez <rofirrim@gmail.com>
Co-Authored-by: ShihPo Hung <shihpo.hung@sifive.com>
Differential Revision: https://reviews.llvm.org/D93632
Define the `vand`, `vor` and `vxor` IR intrinsics for the respective V instructions.
Authored-by: Roger Ferrer Ibanez <rofirrim@gmail.com>
Co-Authored-by: Evandro Menezes <evandro.menezes@sifive.com>
Differential Revision: https://reviews.llvm.org/D93574
CanBeUnnamed is rarely false. Splitting to a createNamedTempSymbol makes the
intention clearer and matches the direction of reverted r240130 (to drop the
unneeded parameters).
No behavior change.
This patch base on D93366, and define vector fixed-point intrinsics.
1. vaaddu/vaadd/vasubu/vasub
2. vsmul
3. vssrl/vssra
4. vnclipu/vnclip
We work with @rogfer01 from BSC to come out this patch.
Authored-by: Roger Ferrer Ibanez <rofirrim@gmail.com>
Co-Authored-by: ShihPo Hung <shihpo.hung@sifive.com>
Differential Revision: https://reviews.llvm.org/D93508
Define vector vfwmul intrinsics and lower them to V instructions.
We work with @rogfer01 from BSC to come out this patch.
Authored-by: Roger Ferrer Ibanez <rofirrim@gmail.com>
Co-Authored-by: Hsiangkai Wang <kai.wang@sifive.com>
Differential Revision: https://reviews.llvm.org/D93584
Define vector vfwadd/vfwsub intrinsics and lower them to V
instructions.
We work with @rogfer01 from BSC to come out this patch.
Authored-by: Roger Ferrer Ibanez <rofirrim@gmail.com>
Co-Authored-by: Hsiangkai Wang <kai.wang@sifive.com>
Differential Revision: https://reviews.llvm.org/D93583
Define vector vfsgnj/vfsgnjn/vfsgnjx intrinsics and lower them to V
instructions.
We work with @rogfer01 from BSC to come out this patch.
Authored-by: Roger Ferrer Ibanez <rofirrim@gmail.com>
Co-Authored-by: Hsiangkai Wang <kai.wang@sifive.com>
Differential Revision: https://reviews.llvm.org/D93581
Define vector vfmul/vfdiv/vfrdiv intrinsics and lower them to V instructions.
We work with @rogfer01 from BSC to come out this patch.
Authored-by: Roger Ferrer Ibanez <rofirrim@gmail.com>
Co-Authored-by: Hsiangkai Wang <kai.wang@sifive.com>
Differential Revision: https://reviews.llvm.org/D93580
Define vlxe/vsxe intrinsics and lower to vlxei<EEW>/vsxei<EEW>
instructions.
We work with @rogfer01 from BSC to come out this patch.
Authored-by: Roger Ferrer Ibanez <rofirrim@gmail.com>
Co-Authored-by: Zakk Chen <zakk.chen@sifive.com>
Differential Revision: https://reviews.llvm.org/D93471
To support OpenCL, which typically uses SPIR as an IR, non-zero address
spaces must be accounted for. This patch makes the RISC-V target assume
no-op address space casts across the board, which effectively removes
the need to support addrspacecast instructions in the backend.
For a RISC-V implementation with different configurations or specialized
address spaces where casts aren't no-ops, the function can be adjusted
as required.
Reviewed By: jrtc27
Differential Revision: https://reviews.llvm.org/D93536
This patch adds two IR intrinsics for vsetvli instruction. One to set the vector length to a user specified value and one to set it to vlmax. The vlmax uses the X0 source register encoding.
Clang builtins will follow in a separate patch
Differential Revision: https://reviews.llvm.org/D92973
The default behavior for any_extend of a constant is to zero extend.
This occurs inside of getNode rather than allowing type legalization
to promote the constant which would sign extend. By using sign extend
with getNode the constant will be sign extended. This gives a better
chance for isel to find a simm5 immediate since all xlen bits are
examined there.
For instructions that use a uimm5 immediate, this change only affects
constants >= 128 for i8 or >= 32768 for i16. Constants that large
already wouldn't have been eligible for uimm5 and would need to use a
scalar register.
If the instruction isn't able to use simm5 or the immediate is
too large, we'll need to materialize the immediate in a register.
As far as I know constants with all 1s in the upper bits should
materialize as well or better than all 0s.
Longer term we should probably have a SEW aware PatFrag to ignore
the bits above SEW before checking simm5.
I updated about half the test cases in some tests to use a negative
constant to get coverage for this.
Reviewed By: evandro
Differential Revision: https://reviews.llvm.org/D93487
This time with tests.
Original message:
Similar to D93365, but for floating point. No need for special ISD opcodes
though. We can directly isel these from intrinsics. I had to use anyfloat_ty
instead of anyvector_ty in the intrinsics to make LLVMVectorElementType not
crash when imported into the -gen-dag-isel tablegen backend.
Differential Revision: https://reviews.llvm.org/D93426
Similar to D93365, but for floating point. No need for special ISD opcodes
though. We can directly isel these from intrinsics. I had to use anyfloat_ty
instead of anyvector_ty in the intrinsics to make LLVMVectorElementType not
crash when imported into the -gen-dag-isel tablegen backend.
Differential Revision: https://reviews.llvm.org/D93426
This adds intrinsics for vmv.x.s and vmv.s.x.
I've used stricter type constraints on these intrinsics than what we've been doing on the arithmetic intrinsics so far. This will allow us to not need to pass the scalar type to the Intrinsic::getDeclaration call when creating these intrinsics.
A custom ISD is used for vmv.x.s in order to implement the change in computeNumSignBitsForTargetNode which can remove sign extends on the result.
I also modified the MC layer description of these instructions to show the tied source/dest operand. This is different than what we do for masked instructions where we drop the tied source operand when converting to MC. But it is a more accurate description of the instruction. We can't do this for masked instructions since we use the same MC instruction for masked and unmasked. Tools like llvm-mca operate in the MC layer and rely on ins/outs and Uses/Defs for analysis so I don't know if we'll be able to maintain the current behavior for masked instructions. So I went with the accurate description here since it was easy.
Reviewed By: frasercrmck
Differential Revision: https://reviews.llvm.org/D93365
We work with @rogfer01 from BSC to come out this patch.
Authored-by: Roger Ferrer Ibanez <rofirrim@gmail.com>
Co-Authored-by: Craig Topper <craig.topper@sifive.com>
Differential Revision: https://reviews.llvm.org/D93514
We work with @rogfer01 from BSC to come out this patch.
Authored-by: Roger Ferrer Ibanez <rofirrim@gmail.com>
Co-Authored-by: ShihPo Hung <shihpo.hung@sifive.com>
Co-Authored-by: Monk Chiang <monk.chiang@sifive.com>
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D93366
Define vlse/vsse intrinsics and lower to V instructions.
We work with @rogfer01 from BSC to come out this patch.
Authored-by: Roger Ferrer Ibanez <rofirrim@gmail.com>
Co-Authored-by: Zakk Chen <zakk.chen@sifive.com>
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D93445
Define vector widening mul intrinsics and lower them to V instructions.
We work with @rogfer01 from BSC to come out this patch.
Authored-by: Roger Ferrer Ibanez <rofirrim@gmail.com>
Co-Authored-by: Hsiangkai Wang <kai.wang@sifive.com>
Differential Revision: https://reviews.llvm.org/D93381
Define vector mul/div/rem intrinsics and lower them to V instructions.
We work with @rogfer01 from BSC to come out this patch.
Authored-by: Roger Ferrer Ibanez <rofirrim@gmail.com>
Co-Authored-by: Hsiangkai Wang <kai.wang@sifive.com>
Differential Revision: https://reviews.llvm.org/D93380
If users want to use vector floating point instructions, they need to
specify 'F' extension additionally.
Differential Revision: https://reviews.llvm.org/D93282
Define vle/vse intrinsics and lower to V instructions.
We work with @rogfer01 from BSC to come out this patch.
Authored-by: Roger Ferrer Ibanez <rofirrim@gmail.com>
Co-Authored-by: Zakk Chen <zakk.chen@sifive.com>
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D93359
Refine tablegen pattern for vector load/store, and follow
D93012 to separate masked and unmasked definitions for
pseudo load/store instructions.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D93284
Define vfadd/vfsub/vfrsub intrinsics and lower to V instructions.
We work with @rogfer01 from BSC to come out this patch.
Authored-by: Roger Ferrer Ibanez <rofirrim@gmail.com>
Co-Authored-by: Hsiangkai Wang <kai.wang@sifive.com>
Differential Revision: https://reviews.llvm.org/D93291
Define vwadd/vwaddu/vwsub/vwsubu intrinsics and lower to V instructions.
Authored-by: Roger Ferrer Ibanez <rofirrim@gmail.com>
Co-Authored-by: Hsiangkai Wang <kai.wang@sifive.com>
Differential Revision: https://reviews.llvm.org/D93108
This moves the vtype decoding and printing to RISCVBaseInfo. This keeps all of
the decoding code in the same area as the encoding code. This will make it
easier to change the decoding for the 1.0 spec in the future.
We're now sharing the printing with the debug output for operands in the
assembler. This also fixes that debug output to include the tail and mask
agnostic bits. Since the printing code works on the vtype immediate value, we
now encode the immediate during parsing and store just the immediate in the
operand.
Add simple pass for removing redundant vsetvli instructions within a basic block. This handles the case where the AVL register and VTYPE immediate are the same and no other instructions that change VTYPE or VL are between them.
There are going to be more opportunities for improvement in this space as we development more complex tests.
Differential Revision: https://reviews.llvm.org/D92679
The compiler is making no effort to preserve upper elements. To do so would require another source operand tied with the destination and a different intrinsic interface to give control of this source to the programmer.
This patch changes the tail policy to agnostic so that the CPU doesn't need to make an effort to preserve them.
This is consistent with the RVV intrinsic spec here https://github.com/riscv/rvv-intrinsic-doc/blob/master/rvv-intrinsic-rfc.md#configuration-setting
Differential Revision: https://reviews.llvm.org/D93080
Use RegisterClass::contains instead of going through getMinimalPhysRegClass
and hasSuperClassEq.
Remove the special case for NoRegister. It's identical to the
handling for any other regsiter that isn't VRM2/M4/M8.
There is an in-progress proposal for the following pseudo-instructions
in the assembler, to complement the existing `sext.w` rv64i instruction:
- sext.b
- sext.h
- zext.b
- zext.h
- zext.w
The `.b` and `.h` variants are available with rv32i and rv64i, and `zext.w` is
only available with `rv64i`.
These are implemented primarily as pseudo-instructions, as these instructions
expand to multiple real instructions. In the case of `zext.b`, this expands to a
single rv32/64i instruction, so it is implemented with an InstAlias (like
`sext.w` is on rv64i).
The proposal is available here: https://github.com/riscv/riscv-asm-manual/pull/61
Reviewed By: asb
Differential Revision: https://reviews.llvm.org/D92793
If SETUNE isn't legal, UO can use the NOT of the SETO expansion.
Removes some complex isel patterns. Most of the test changes are
from using XORI instead of SEQZ.
Differential Revision: https://reviews.llvm.org/D92008
The register operand was not being marked as a def when it should be. No tests
for this in the main branch as there are not yet any pseudos without a
non-negative VLIndex.
Also change the type of a virtual register operand from unsigned to Register
and adjust formatting.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D92823
This merges the SEW and LMUL enums that each used into singles enums in RISCVBaseInfo.h. The patch also adds a new encoding helper to take SEW, LMUL, tail agnostic, mask agnostic and turn it into a vtype immediate.
I also stopped storing the Encoding in the VTYPE operand in the assembler. It is easy to calculate when adding the operand which should only happen once per instruction.
Differential Revision: https://reviews.llvm.org/D92813
We can use these instructions for single bit immediates that are too large for ANDI/ORI/CLRI.
The _10 test cases are to make sure that we still use ANDI/ORI/CLRI for small immediates.
Differential Revision: https://reviews.llvm.org/D92262
-Reject an "mf1" lmul
-Make sure tail agnostic is exactly "tu" or "ta" not just that it starts with "tu" or "ta"
-Make sure mask agnostic is exactly "mu" or "ma" not just that it starts with "mu" or "ma"
Differential Revision: https://reviews.llvm.org/D92805
APInt's string constructor asserts on error. Since this is the parser and we don't yet know if the string is a valid integer we shouldn't use that.
Instead use StringRef::getAsInteger which returns a bool to indicate success or failure.
Since we no longer need APInt, use 'unsigned' instead.
Differential Revision: https://reviews.llvm.org/D92801
This node returns 2 results and uses a chain. As long as we use a DAG as part of the pseudo instruction definition where we can use the "set" operator, it looks like tablegen can handle use a pattern for this without a problem. I believe the original implementation was copied from PowerPC.
This also fixes the pseudo instruction so that it is marked as having side effects to match the definition of CSRRS and the RV64 instruction. And we don't need to explicitly clear mayLoad/mayStore since those can be inferred now.
Differential Revision: https://reviews.llvm.org/D92786
A rotate by half the bitwidth swaps the bottom and top half which is the same as one of the MSB GREVI stage.
We have to do this as a special combine because we prefer to keep (rotl/rotr X, BitWidth/2) as a rotate rather than a single stage GREVI.
Differential Revision: https://reviews.llvm.org/D92286
On the surface this would be slightly less optimal for the isel
table, but due to a tablegen issue with HW mode this ends up
generating a smaller isel table.
The companion RFC (http://lists.llvm.org/pipermail/llvm-dev/2020-October/145850.html) gives lots of details on the overall strategy, but we summarize it here:
LLVM IR involving vector types is going to be selected using pseudo instructions (only MachineInstr). These pseudo instructions contain dummy operands to represent the vector type being operated and the vector length for the operation.
These two dummy operands, as set by instruction selection, will be used by the custom inserter to prepend every operation with an appropriate vsetvli instruction that ensures the vector architecture is properly configured for the operation. Not in this patch: later passes will remove the redundant vsetvli instructions.
Register classes of tuples of vector registers are used to represent vector register groups (LMUL > 1).
Those pseudos are eventually lowered into the actual instructions when emitting the MCInsts.
About the patch:
Because there is a bit of initial infrastructure required, this is the minimal patch that allows us to select instructions for 3 LLVM IR instructions: load, add and store vectors of integers. LLVM IR operations have "whole-vector" semantics (as in they generate values for all the elements).
Later patches will extend the information represented in TableGen.
Authored-by: Roger Ferrer Ibanez <rofirrim@gmail.com>
Co-Authored-by: Evandro Menezes <evandro.menezes@sifive.com>
Co-Authored-by: Craig Topper <craig.topper@sifive.com>
Differential Revision: https://reviews.llvm.org/D89449
This makes the llvm-objdump output much more readable and closer to binutils objdump. This builds on D76591
It requires changing the OperandType for certain immediates to "OPERAND_PCREL" so tablegen will generate code to pass the instruction's address. This means we can't do the generic check on these instructions in verifyInstruction any more. Should I add it back with explicit opcode checks? Or should we add a new operand flag to control the passing of address instead of matching the name?
Differential Revision: https://reviews.llvm.org/D92147
Craig Topper