I'm looking at adding a second INLINEASM opcode for better modeling asm-goto
as a terminator. Using the existing predicate will reduce teh number of
places that will need to use the new opcode.
llvm-svn: 353095
Summary:
This patch fixes clang-tidy warnings on wasm-only files.
The list of checks used is:
`-*,clang-diagnostic-*,llvm-*,misc-*,-misc-unused-parameters,readability-identifier-naming,modernize-*`
(LLVM's default .clang-tidy list is the same except it does not have
`modernize-*`. But I've seen in multiple CLs in LLVM the modernize style
was recommended and code was fixed based on the style, so I added it as
well.)
The common fixes are:
- Variable names start with an uppercase letter
- Function names start with a lowercase letter
- Use `auto` when you use casts so the type is evident
- Use inline initialization for class member variables
- Use `= default` for empty constructors / destructors
- Use `using` in place of `typedef`
Reviewers: sbc100, tlively, aardappel
Subscribers: dschuff, sunfish, jgravelle-google, yurydelendik, kripken, MatzeB, mgorny, rupprecht, llvm-commits
Differential Revision: https://reviews.llvm.org/D57500
llvm-svn: 353075
Summary:
Noticed while looking at D56052.
```
// The 'control' of BEXTR has the pattern of:
// [15...8 bit][ 7...0 bit] location
// [ bit count][ shift] name
// I.e. 0b000000011'00000001 means (x >> 0b1) & 0b11
```
I.e. we do not care about any of the bits aside from the low 16 bits.
So there is no point in doing the `slh`,`or` in 64 bits,
let's just do everything in 32 bits, and anyext if needed.
We could do that in 16 even, but we intentionally don't
zext to i16 (longer encoding IIRC),
so i'm guessing the same applies here.
Reviewers: craig.topper, andreadb, RKSimon
Reviewed By: craig.topper
Subscribers: llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D56715
llvm-svn: 353073
These instructions implicitly operate on ST0, but we don't currently add that information to the MachineInstr. We also don't add it the tablegen definitions either.
For the most part this doesn't cause any problems because the stackifying occurs after register allocation. All the instructions are marked as having side effects so the postRA scheduler won't reorder them amongst themselves.
But nothing stops inline assembly using X87 instructions from being reordered around other x87 instructions if that inline assembly wasn't marked volatile.
The two test cases I've identified so far in PR40539 involve loads and stores used to set up the inline assembly or capture the results of the inline assembly ending up in the wrong order.
This patch adds implicit ST0 uses/defs to the load/store instructions to prevent this from happening.
I plan to fix all of the FP instructions, but the binops are bit trickier to get right. So I've chosen fixing the known test cases as a good first step.
I think we also need to update the tablegen descriptions so MS inline assembly infers the right clobbers, but I haven't checked that yet.
Differential Revision: https://reviews.llvm.org/D57644
llvm-svn: 353070
Summary:
These were "boilerplate" that repeated information already present
in .functype and end_function, that needed to be repeated to Please
the particular way our object writing works, and missing them would
generate errors.
Instead, we generate the information for these automatically so the
user can concern itself with writing more canonical wasm functions
that always work as expected.
Reviewers: dschuff, sbc100
Subscribers: jgravelle-google, aheejin, sunfish, llvm-commits
Differential Revision: https://reviews.llvm.org/D57546
llvm-svn: 353067
See https://github.com/WebAssembly/tool-conventions/pull/95.
This is less typing and IMHO more readable, and it also fits with
our naming around the binary format which tends to use the short name.
e.g.
include/llvm/BinaryFormat/Wasm.h
tools/llvm-objdump/WasmDump.cpp
etc..
Differential Revision: https://reviews.llvm.org/D57611
llvm-svn: 353062
All of these instructions consume one encoded register and the other register is %st. They either write the result to %st or the encoded register. Previously we printed both arguments when the encoded register was written. And we printed one argument when the result was written to %st. For the stack popping forms the encoded register is always the destination and we didn't print both operands. This was inconsistent with gcc and objdump and just makes the output assembly code harder to read.
This patch changes things to always print both operands making us consistent with gcc and objdump. The parser should still be able to handle the single register forms just as it did before. This also matches the GNU assembler behavior.
llvm-svn: 353061
For PCMPGT(0, X) patterns where we only demand the sign bit (e.g. BLENDV or MOVMSK) then we can use X directly.
Differential Revision: https://reviews.llvm.org/D57667
llvm-svn: 353051
This patch removes hidden codegen flag -print-schedule effectively reverting the
logic originally committed as r300311
(https://llvm.org/viewvc/llvm-project?view=revision&revision=300311).
Flag -print-schedule was originally introduced by r300311 to address PR32216
(https://bugs.llvm.org/show_bug.cgi?id=32216). That bug was about adding "Better
testing of schedule model instruction latencies/throughputs".
These days, we can use llvm-mca to test scheduling models. So there is no longer
a need for flag -print-schedule in LLVM. The main use case for PR32216 is
now addressed by llvm-mca.
Flag -print-schedule is mainly used for debugging purposes, and it is only
actually used by x86 specific tests. We already have extensive (latency and
throughput) tests under "test/tools/llvm-mca" for X86 processor models. That
means, most (if not all) existing -print-schedule tests for X86 are redundant.
When flag -print-schedule was first added to LLVM, several files had to be
modified; a few APIs gained new arguments (see for example method
MCAsmStreamer::EmitInstruction), and MCSubtargetInfo/TargetSubtargetInfo gained
a couple of getSchedInfoStr() methods.
Method getSchedInfoStr() had to originally work for both MCInst and
MachineInstr. The original implmentation of getSchedInfoStr() introduced a
subtle layering violation (reported as PR37160 and then fixed/worked-around by
r330615).
In retrospect, that new API could have been designed more optimally. We can
always query MCSchedModel to get the latency and throughput. More importantly,
the "sched-info" string should not have been generated by the subtarget.
Note, r317782 fixed an issue where "print-schedule" didn't work very well in the
presence of inline assembly. That commit is also reverted by this change.
Differential Revision: https://reviews.llvm.org/D57244
llvm-svn: 353043
This prevents Constant Hoisting from pulling the constant out of the block,
allowing us to still produce LDRH/UXTH nodes. LDRB/UXTB (255) is already cheap
by the default getIntImmCost, but I've added it for clarity.
Differential Revision: https://reviews.llvm.org/D57671
llvm-svn: 353040
We now print ST0 as 'st' when generating the clobber list for MS inline assembly in clang. This matches what the gcc reg name list expects.
Original commit message:
This fixes the test case in PR35982 by preventing MMX instructions that read MM0-7 from being moved below EMMS/FEMMS by the post RA scheduler.
Though as discussed in bugzilla, this is not a complete fix. There is still the possibility of reordering in IR or by the pre-RA scheduler.
Differential Revision: https://reviews.llvm.org/D57298
llvm-svn: 353016
Looking into gcc and objdump behavior more this was overly aggressive. If the register is encoded in the instruction we should print %st(0), if its implicit we should print %st.
I'll be making a more directed change in a future patch.
llvm-svn: 353013
Summary:
When calculating clobbers for MS style inline assembly we fail if the asm clobbers stack top because we print st(0) and try to pass it through the gcc register name check. This was found with when I attempted to make a emms/femms clobber all ST registers. If you use emms/femms in MS inline asm we would try to use st(0) as the clobber name but clang would think that wasn't a valid clobber name.
This also matches what objdump disassembly prints. It's also what is printed by gcc -S.
Reviewers: RKSimon, rnk, efriedma, spatel, andreadb, lebedev.ri
Reviewed By: rnk
Subscribers: eraman, gbedwell, lebedev.ri, llvm-commits
Differential Revision: https://reviews.llvm.org/D57621
llvm-svn: 352985
Summary:
Add an additional combine to combineCarryThroughADD to reverse it back to the C flag to avoid regressions.
I believe this catches the cases that D57547 got.
Reviewers: RKSimon, spatel
Reviewed By: spatel
Subscribers: javed.absar, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D57637
llvm-svn: 352984
For the scalar case only.
Also move the similar G_MERGE_VALUES handling to a separate function
and cleanup to make them look more similar.
llvm-svn: 352979
Push the insert_subvector up through the shuffle operands to help find more cross-lane shuffles.
The is exposes a couple of minor issues that will be fixed shortly:
Missed broadcast folds - we have a mixture of vzext_load lengths that need cleaning up
combine-sdiv.ll - AVX1 SimplifyDemandedVectorElts failure (hits max depth due to a couple of extra bitcasts).
llvm-svn: 352963
We already have the getConstantOperandVal helper which returns a uint64_t, but along comes the fuzzer and inserts a i128 -1 constant or something and the whole thing asserts.......
I've updated a few obvious cases, and tried to make use of the const reference where possible, but there's more to do. A number of existing oss-fuzz tickets should be fixed if we start using APInt and perform value clamping where necessary.
llvm-svn: 352961
In IR, sometimes the following attributes for DIFile may be
generated:
filename: /home/yhs/test.c
directory: /tmp
The /tmp may represent the working directory of the compilation
process.
In such cases, since filename is with absolute path,
the directory should be ignored by BTF. The filename alone is
enough to get the source.
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Yonghong Song <yhs@fb.com>
llvm-svn: 352952
In IR, sometimes the following attributes for DIFile may be
generated:
filename: /home/yhs/test.c
directory: /tmp
The /tmp may represent the working directory of the compilation
process.
In such cases, since filename is with absolute path,
the directory should be ignored by BTF. The filename alone is
enough to get the source.
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Yonghong Song <yhs@fb.com>
llvm-svn: 352939
Summary: This fixes using the correct stack registers for SEH when stack realignment is needed or when variable size objects are present.
Reviewers: rnk, efriedma, ssijaric, TomTan
Reviewed By: rnk, efriedma
Subscribers: javed.absar, kristof.beyls, llvm-commits
Differential Revision: https://reviews.llvm.org/D57183
llvm-svn: 352923
This cleans up all GetElementPtr creation in LLVM to explicitly pass a
value type rather than deriving it from the pointer's element-type.
Differential Revision: https://reviews.llvm.org/D57173
llvm-svn: 352913
This cleans up all LoadInst creation in LLVM to explicitly pass the
value type rather than deriving it from the pointer's element-type.
Differential Revision: https://reviews.llvm.org/D57172
llvm-svn: 352911
This cleans up all CallInst creation in LLVM to explicitly pass a
function type rather than deriving it from the pointer's element-type.
Differential Revision: https://reviews.llvm.org/D57170
llvm-svn: 352909
Summary:
Incorrect code was generated when lowering insertelement operations
for vectors with 8 or 16 bit elements. The value being inserted was
not adjusted for the position of the element within the 32 bit word
and so only the low element within each 32 bit word could receive
the intended value.
Fixed by simply replicating the value to each element of a
congruent vector before the mask and or operation used to
update the intended element.
A number of affected LIT tests have been updated appropriately.
before the mask & or into the intended
Reviewers: arsenm, nhaehnle
Reviewed By: arsenm
Subscribers: llvm-commits, arsenm, kzhuravl, jvesely, wdng, nhaehnle, yaxunl, dstuttard, tpr, t-tye
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D57588
llvm-svn: 352885
As suggested on PR40318, this patch uses PSLLDQ/PSRLDQ to lower shuffles to zero out the ends of a vector, leaving a sequential inner section.
For pre-SSSE3 we do this for shuffles with zeros at either end (requiring up to 3 shifts), but once PSHUFB is available I've limited this to shuffles with a single zeroable end (2 shifts).
Differential Revision: https://reviews.llvm.org/D56784
llvm-svn: 352883
Enable peeking through one use bitcasts to the subvector shuffle.
This still depends on the subvector being the same scalar-size but D57514 has already helped with the more tricky patterns
llvm-svn: 352879
This patch changes isFPImmLegal to return if the value can be enconded
as the immediate operand of a logical instruction besides checking if
for immediate field for fmov.
This optimizes some floating point materization, inclusive values
used on isinf lowering.
Reviewed By: rengolin, efriedma, evandro
Differential Revision: https://reviews.llvm.org/D57044
llvm-svn: 352866
Summary:
I'm unable to find this number in the "AMD SOG for family 15h".
llvm-exegesis measures the latencies of these instructions as `2`,
which matches the latencies specified in "AMD SOG for family 15h".
However if we look at Agner, Microarchitecture, "AMD Bulldozer, Piledriver,
Steamroller and Excavator pipeline", "Data delay between different execution
domains", the int->ivec transfer is listed as `8`..`10`cy of additional latency.
Also, Agner's "Instruction tables", for Piledriver, lists their latencies as `12`,
which is consistent with `2cy` from exegesis / AMD SOG + `10cy` transfer delay.
Additional data point comes from the fact that Agner's "Instruction tables",
for Jaguar, lists their latencies as `8`; and "AMD SOG for family 16h" does
state the `+6cy` int->ivec delay, which is consistent with instr latency of `1` or `2`.
Reviewers: andreadb, RKSimon, craig.topper
Reviewed By: andreadb
Subscribers: gbedwell, courbet, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D57300
llvm-svn: 352861
InlineCost's isInlineViable() is changed to return InlineResult
instead of bool. This provides messages for failure reasons and
allows to get more specific messages for cases where callsites
are not viable for inlining.
Reviewed By: xbolva00, anemet
Differential Revision: https://reviews.llvm.org/D57089
llvm-svn: 352849
This patch:
* Adds necessary RV64D codegen patterns
* Modifies CC_RISCV so it will properly handle f64 types (with soft float ABI)
Note that in general there is no reason to try to select fcvt.w[u].d rather than fcvt.l[u].d for i32 conversions because fptosi/fptoui produce poison if the input won't fit into the target type.
Differential Revision: https://reviews.llvm.org/D53237
llvm-svn: 352833
Matt Arsenault