- Introduce JITDefault code model. This tells targets to set different default
code model for JIT. This eliminates the ugly hack in TargetMachine where
code model is changed after construction.
llvm-svn: 135580
(including compilation, assembly). Move relocation model Reloc::Model from
TargetMachine to MCCodeGenInfo so it's accessible even without TargetMachine.
llvm-svn: 135468
to MCRegisterInfo. Also initialize the mapping at construction time.
This patch eliminate TargetRegisterInfo from TargetAsmInfo. It's another step
towards fixing the layering violation.
llvm-svn: 135424
TargetAsmInfo, which in turn pulls in TargetRegisterInfo, etc. :-( There are
other cases of violations, but this is probably the worst.
This patch is but one small step towards fixing this. 500 more steps to go. :-(
llvm-svn: 135131
Update the debug output interface for MCParsedAsmOperand to have a print()
method which takes an output stream argument, an << operator which invokes
the print method using the given stream, and a dump() method which prints
the operand to the dbgs() stream. This makes the interface more consistent
with the rest of LLVM, and more convenient to use at the debugger command
line.
llvm-svn: 135043
The enum names as well as order (i.e. value)
had skewed, which means that consumers of the
tablegen-ed table would see different values than
intended. Make both files have a superset of enums,
and add classification as needed for numMCOperands.
Reviewed by Owen Anderson
llvm-svn: 134905
and MCSubtargetInfo.
- Added methods to update subtarget features (used when targets automatically
detect subtarget features or switch modes).
- Teach X86Subtarget to update MCSubtargetInfo features bits since the
MCSubtargetInfo layer can be shared with other modules.
- These fixes .code 16 / .code 32 support since mode switch is updated in
MCSubtargetInfo so MC code emitter can do the right thing.
llvm-svn: 134884
CPU, and feature string. Parsing some asm directives can change
subtarget state (e.g. .code 16) and it must be reflected in other
modules (e.g. MCCodeEmitter). That is, the MCSubtargetInfo instance
must be shared.
llvm-svn: 134795
- Each target asm parser now creates its own MCSubtatgetInfo (if needed).
- Changed AssemblerPredicate to take subtarget features which tablegen uses
to generate asm matcher subtarget feature queries. e.g.
"ModeThumb,FeatureThumb2" is translated to
"(Bits & ModeThumb) != 0 && (Bits & FeatureThumb2) != 0".
llvm-svn: 134678
numbers should be printed instead of symbolic register names in
MCAsmStreamer::EmitRegisterName. This is necessary because some versions of
GNU assembler won't accept code in which symbolic register names are used in
cfi directives. There is no change in behavior unless the flag is explicitly
set to true by a backend.
llvm-svn: 134635
itineraries.
- Refactor TargetSubtarget to be based on MCSubtargetInfo.
- Change tablegen generated subtarget info to initialize MCSubtargetInfo
and hide more details from targets.
llvm-svn: 134257
be the first encoded as the first feature. It then uses the CPU name to look up
features / scheduling itineray even though clients know full well the CPU name
being used to query these properties.
The fix is to just have the clients explictly pass the CPU name!
llvm-svn: 134127
For example, ".byte 256" would previously assert() when emitting an object
file. Now it generates a diagnostic that the literal value is out of range.
rdar://9686950
llvm-svn: 134069
Move the target-specific RecordRelocation logic out of the generic MC
MachObjectWriter and into the target-specific object writers. This allows
nuking quite a bit of target knowledge from the supposedly target-independent
bits in lib/MC.
llvm-svn: 133844
"Reinstate r133435 and r133449 (reverted in r133499) now that the clang
self-hosted build failure has been fixed (r133512)."
Due to some additional warnings.
llvm-svn: 133700
The LSDA is a bit difficult for the non-initiated to read. Even with comments,
it's not always clear what's going on. This wraps the ASM streamer in a class
that retains the LSDA and then emits a human-readable description of what's
going on in it.
So instead of having to make sense of:
Lexception1:
.byte 255
.byte 155
.byte 168
.space 1
.byte 3
.byte 26
Lset0 = Ltmp7-Leh_func_begin1
.long Lset0
Lset1 = Ltmp812-Ltmp7
.long Lset1
Lset2 = Ltmp913-Leh_func_begin1
.long Lset2
.byte 3
Lset3 = Ltmp812-Leh_func_begin1
.long Lset3
Lset4 = Leh_func_end1-Ltmp812
.long Lset4
.long 0
.byte 0
.byte 1
.byte 0
.byte 2
.byte 125
.long __ZTIi@GOTPCREL+4
.long __ZTIPKc@GOTPCREL+4
you can read this instead:
## Exception Handling Table: Lexception1
## @LPStart Encoding: omit
## @TType Encoding: indirect pcrel sdata4
## @TType Base: 40 bytes
## @CallSite Encoding: udata4
## @Action Table Size: 26 bytes
## Action 1:
## A throw between Ltmp7 and Ltmp812 jumps to Ltmp913 on an exception.
## For type(s): __ZTIi@GOTPCREL+4 __ZTIPKc@GOTPCREL+4
## Action 2:
## A throw between Ltmp812 and Leh_func_end1 does not have a landing pad.
llvm-svn: 133286
Re-apply 133010, with fixes for inline assembler.
Original commit message:
"When an assembler local symbol is used but not defined in a module, a
Darwin assembler wants to issue a diagnostic to that effect."
Added fix to only perform the check when finalizing, as otherwise we're not
done and undefined symbols may simply not have been encountered yet.
Passes "make check" and a self-host check on Darwin.
llvm-svn: 133071
When an assembler local symbol is used but not defined in a module, a
Darwin assembler wants to issue a diagnostic to that effect.
rdar://9559714
llvm-svn: 133010
VK_GOTOFF reloc. This matches as' behavior, but it is not clear why the linker
might need this, so I added a FIXME.
I could test this by duplicating test/MC/ELF/got.s, but it doesn't look
worthwhile.
llvm-svn: 132655
Parsing a register name/number for .cfi directives can't assume that a
register name starts with a '%' token. Be more flexible and check for a
register number instead. Still unlikely to be perfect, but it allows us
to parse both plain identifiers as register names and integers as register
numbers, which is what we're wanting to support at this point.
llvm-svn: 132466
suffix (e.g. .xdata$myfunc). The suffix part isn't implemented yet, but
I'll get to it in the next patch.
Fix up all callers of the affected functions. Make them pass said suffix to
the function.
llvm-svn: 132205
- Flip order of bitfields. This gets our output matching GAS.
- Handle case where the end of the prolog wasn't specified.
- If the resulting unwind info struct is less than 8 bytes, pad to 8 bytes.
Add a test for the latter two.
llvm-svn: 132188
still report leaks, but they're spurious now. Valgrind cannot peer into
std::vector objects--or any dynamic array, for that matter--because it doesn't
know how big the array is.
llvm-svn: 132174
Rework how the MCWin64EHUnwindInfo instances are stored. Fix issues with
chained unwind areas exposed by the test that were related to this.
The ChainedParent field had the wrong address, because when the chained unwind
info was added, the addresses shifted around. Now we store the pointers to the
structures, which are now allocated from the MC heap.
llvm-svn: 132106
them.
I had to add a special SwitchSectionNoChange method to MCStreamer just for
.seh_handlerdata. If this isn't OK, please let me know, and I'll find some
other way to fix .seh_handlerdata streaming.
llvm-svn: 132084
Add a size alignment check to the .seh_stackalloc directive parser. Add a
more descriptive error message to the .seh_handler directive parser.
Add methods to the TargetAsmInfo struct in support of all this.
llvm-svn: 131992
I haven't implemented any of the ones that take registers yet. The problem is
that for x86-64 the streamer methods expect a native x86 register number (note:
%r8-%r15 want 8-15 instead of 0-7; same for %xmm8-%xmm15). I haven't figured
out exactly how I want to do that yet.
llvm-svn: 131899
There's really nothing to implement. All this really does is swap to a
pseudo-section that later gets written to the unwind info struct. That
needs to be implemented in the object streamers.
llvm-svn: 131734
ours compatible with GAS.
In retrospect, I should have emailed binutils about this earlier. Thanks to
Kai Tietz for pointing out that GAS already had SEH directives.
llvm-svn: 131652
- StartChained and EndChained delimit a chained unwind area, which can contain
additional operations to be undone if an exception occurs inside of it.
- UnwindOnly declares that this function doesn't handle any exceptions. If it
has a handler, it's an unwind handler instead of an exception handler.
- Lsda declares the location and size of the LSDA, which in the Win64 EH
scheme is kept inside the UNWIND_INFO struct. Windows itself ignores the
LSDA; it's used by the Language-Specific Handler (the "Personality Function"
from DWARF).
llvm-svn: 131572
GAS has no such directives (not even mingw-w64 GAS has them), so I took
creative license with their names in assembly. I prefixed them all with
"w64_" to avoid namespace collisions, for example. If I discover that GAS
has taken a different approach, I'll change ours to match.
llvm-svn: 131525
the purposes of the Win64 EH tables, I realized we had no way to tell where
the function ends. (MASM bounds functions with PROC and ENDP keywords.)
Add a directive to delimit the end of the function, and rename the 'frame'
directive to more accurately reflect its duality with the new directive.
llvm-svn: 131522
("T is 1 if the target symbol S has type STT_FUNC and the
symbol addresses a Thumb instruction ;it is 0 otherwise."
from "ELF for the ARM Architecture" 4.7.1.2)
Patch by Koan-Sin Tan!
llvm-svn: 131406
LLVM and binutils.
With this patch, there are no functional differences between the .o
produced directly from LLVM versus the .s to .o via GNU as, for relocation tags
at least, for both PIC and non-PIC modes.
Because some non-PIC reloc tags are used (legally) on PIC, so IsPCRel flag is
necessary but not sufficient to determine whether the overall codegen mode is
PIC or not. Why is this necessary? There is an incompatibility of how relocs
are emitted in the .rodata section. Binutils PIC likes to emit certain relocs
as section relative offsets. Non-PIC does not do this.
So I added a hidden switch on the ELFObjectwriter "-arm-elf-force-pic" which
forces the objectwriter to pretend that all relocs are for PIC mode.
Todo: Activate ForceARMElfPIC to true if -relocation-model=pic is selected
on llc.
Todo: There are probably more issues for PIC mode on ARM/MC/ELF...
Todo: Existing tests in MC/ARM/elf-reloc*.ll need to be converted over to .s
tests as well as expanded to cover the gamut.
llvm-svn: 131205
it is both inefficient and unexpected by dwarfdump. Change to
a DW_FORM_data4.
While in here, change the predicate name to reflect that the position
is not really absolute (it is an offset), just that the linker needs a
relocation.
llvm-svn: 130846
for all symbol differences and can drop the old EmitPCRelSymbolValue
method.
This also make getExprForFDESymbol on ELF equal to the one on MachO, and it
can be made non-virtual.
llvm-svn: 130634
Currently the output should be almost identical to the one produced by CodeGen
to make the transition easier.
The only two differences I know of are:
* Some files get an extra advance loc of size 0. This will be fixed when
relaxations are enabled.
* The optimization of declaring an EH symbol as an external variable is not
implemented. This is a subset of adding the nounwind attribute, so we if really
this at -O0 we should probably do it at the IL level.
llvm-svn: 130623
small heap-allocated SmallString because it unconditionally forces a malloc.
(Revised version of r129688, with the necessary flush() call.)
llvm-svn: 129716
.long 80+08
go ahead and assume that if we've got an Error token that we handled it
already. Otherwise if it's a token we can't handle then go ahead and
return the default error.
llvm-svn: 129322
disassembler API. Hooked this up to the ARM target so such tools as Darwin's
otool(1) can now print things like branch targets for example this:
blx _puts
instead of this:
blx #-36
And even print the expression encoded in the Mach-O relocation entried for
things like this:
movt r0, :upper16:((_foo-_bar)+1234)
llvm-svn: 129284
error stream, in cases where the AsmParser is
being invoked by EDDisassembler. Before, they
were being sent to errs() because no error handler
was installed in the SourceMgr.
llvm-svn: 129177
getEDInfo(), in which case this code would dereference
NULL. EDInst can already handle NULL info, so avoid
the dereference and pass NULL through.
Reviewed by Sean Callanan
llvm-svn: 128904
otool(1), this time with the needed fix for case sensitive file systems :) .
This is a work in progress as the interface for producing symbolic operands is
not done. But a hacked prototype using information from the object file's
relocation entiries and replacing immediate operands with MCExpr's has been
shown to work with no changes to the instrucion printer. These APIs will be
moved into a dynamic library at some point.
llvm-svn: 128415
This is a work in progress as the interface for producing symbolic operands is
not done. But a hacked prototype using information from the object file's
relocation entiries and replacing immediate operands with MCExpr's has been
shown to work with no changes to the instrucion printer. These APIs will be
moved into a dynamic library at some point.
llvm-svn: 128308
The MC asm lexer wasn't honoring a non-default (anything but ';') statement
separator. Fix that, and generalize a bit to support multi-character
statement separators.
llvm-svn: 128227
the alias of an InstAlias instead of the thing being aliased. Because we need to
know the features that are valid for an InstAlias.
This is part of a work-in-progress.
llvm-svn: 127986
for calls to weak symbols with a definition has the appearance of working
with LLVM-generated code because weak symbol definitions are put in their
own sections.
llvm-svn: 126933
Evan Cheng