We need to use the overload of Mangler::getNameWithPrefix that takes a
GlobalValue in order to mangle in the stdcall stack byte count for Windows
targets.
Differential Revision: https://reviews.llvm.org/D25529
llvm-svn: 284040
Branch folder removes implicit defs if they are the only non-branching
instructions in a block, and the branches do not use the defined registers.
The problem is that in some cases these implicit defs are required for
the liveness information to be correct.
Differential Revision: https://reviews.llvm.org/D25478
llvm-svn: 284036
This is the most basic handling of the indirect access
pseudos using GPR indexing mode. This currently only enables
the mode for a single v_mov_b32 and then disables it.
This is much more complicated to use than the movrel instructions,
so a new optimization pass is probably needed to fold the access
into the uses and keep the mode enabled for them.
llvm-svn: 284031
Module inline asm was always being linked/concatenated
when running the IRLinker. This is correct for full LTO but not when
we are importing for ThinLTO, as it can result in multiply defined
symbols when the module asm defines a global symbol.
In order to test with llvm-lto2, I had to work around PR30396,
where a symbol that is defined in module assembly but defined in the
LLVM IR appears twice. Added workaround to llvm-lto2 with a FIXME.
Fixes PR30610.
Reviewers: mehdi_amini
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D25359
llvm-svn: 284030
Summary:
Constant bundle operands may need to retain their constant-ness for
correctness. I'll admit that this is slightly odd, but it looks like
SimplifyCFG already does this for things like @llvm.frameaddress and
@llvm.stackmap, so I suppose adding one more case is not a big deal.
It is possible to add a mechanism to denote bundle operands that need to
remain constants, but that's probably too complicated for the time
being.
Reviewers: jmolloy
Subscribers: mcrosier, llvm-commits
Differential Revision: https://reviews.llvm.org/D25502
llvm-svn: 284028
Since this change is known to cause performance degradations in some cases it's commited under a temporary flag which is turned off by default.
Patch by Li Huang
Differential Revision: https://reviews.llvm.org/D18777
llvm-svn: 284022
Add a number of helper functions to match scalar or vector equivalent constant/splat values to allow most of the combine patterns to be used by vectors.
Differential Revision: https://reviews.llvm.org/D25374
llvm-svn: 284015
This combiner breaks debug experience and should not be run when optimizations are disabled.
For example:
int main() {
int j = 0;
j += 2;
if (j == 2)
return 0;
return 5;
}
When debugging this code compiled in /O0, it should be valid to break at line "j+=2;" and edit the value of j. It should change the return value of the function.
Differential Revision: https://reviews.llvm.org/D19268
llvm-svn: 284014
An arithmetic shift can be safely changed to a logical shift if the first
operand is known positive. This allows ComputeKnownBits (and similar analysis)
to determine the sign bit of the shifted value in some cases. In turn, this
allows InstCombine to canonicalize a signed comparison (a > 0) into an equality
check (a != 0).
PR30577
Differential Revision: https://reviews.llvm.org/D25119
llvm-svn: 284013
As discussed by Andrea on PR30486, we have an unsafe cast to an Instruction type in the select combine which doesn't take into account that it could be a ConstantExpr instead.
Differential Revision: https://reviews.llvm.org/D25466
llvm-svn: 284000
Add unit tests for checking a few tricky instruction sizes. Also remove the old
tests for the instruction sizes, which were clunky and brittle.
Since this is the first set of target-specific unit tests, we need to add some
CMake plumbing. In the future, adding unit tests for a given target will be as
simple as creating a directory with the same name as the target under
unittests/Target. The tests are only run if the target is enabled in
LLVM_TARGETS_TO_BUILD.
Differential Revision: https://reviews.llvm.org/D24548
llvm-svn: 283990
Although Copies are not specific to preISel, we still have to assign them
a proper register class. However, given they are not constrained to
anything we do not have to handle the source register at the copy. It
will be properly mapped when reaching the related definition.
In the process, the handlong of G_ANYEXT is slightly modified as those
end up being selected as copy. The difference is that when register size
do not match on both sides, we need to insert SUBREG_TO_REG operation,
otherwise the post RA copy expansion will not be happy!
llvm-svn: 283972
This is a refreshed version of a patch that was reverted: it fixes
the problems reported in both PR30216 and PR30499, and
contains all the test-cases from both bugs.
To hoist stores past loads, we used to search for potential
conflicting loads on the hoisting path by following a MemorySSA
def-def link from the store to be hoisted to the previous
defining memory access, and from there we followed the def-use
chains to all the uses that occur on the hoisting path. The
problem is that the def-def link may point to a store that does
not alias with the store to be hoisted, and so the loads that are
walked may not alias with the store to be hoisted, and even as in
the testcase of PR30216, the loads that may alias with the store
to be hoisted are not visited.
The current patch visits all loads on the path from the store to
be hoisted to the hoisting position and uses the alias analysis
to ask whether the store may alias the load. I was not able to
use the MemorySSA functionality to ask for whether load and
store are clobbered: I'm not sure which function to call, so I
used a call to AA->isNoAlias().
Store past store is still working as before using a MemorySSA
query: I added an extra test to pr30216.ll to make sure store
past store does not regress.
Tested on x86_64-linux with check and a test-suite run.
Differential Revision: https://reviews.llvm.org/D25476
llvm-svn: 283965
Summary:
In PPCMIPeephole, when we see two splat instructions, we can't simply do the following transformation:
B = Splat A
C = Splat B
=>
C = Splat A
because B may still be used between these two instructions. Instead, we should make the second Splat a PPC::COPY and let later passes decide whether to remove it or not:
B = Splat A
C = Splat B
=>
B = Splat A
C = COPY B
Fixes PR30663.
Reviewers: echristo, iteratee, kbarton, nemanjai
Subscribers: mehdi_amini, llvm-commits
Differential Revision: https://reviews.llvm.org/D25493
llvm-svn: 283961
Fixes a crash in the build_vector -> vector_shuffle combine
when the first vector input is twice as wide as the output,
and the second input vector is even wider.
llvm-svn: 283953
On Darwin, marking a section as "regular,live_support" means that a
symbol in the section should only be kept live if it has a reference to
something that is live. Otherwise, the linker is free to dead-strip it.
Turn this functionality on for the __llvm_prf_data section.
This means that counters and data associated with dead functions will be
removed from dead-stripped binaries. This will result in smaller
profiles and binaries, and should speed up profile collection.
Tested with check-profile, llvm-lit test/tools/llvm-{cov,profdata}, and
check-llvm.
Differential Revision: https://reviews.llvm.org/D25456
llvm-svn: 283947
Reverts r283938 to reinstate r283867 with a fix.
The original change had an ArrayRef referring to a destroyed temporary
initializer list. Use plain C arrays instead.
llvm-svn: 283942
load commands that uses the MachO::linker_option_command
type but not used in llvm libObject code but used in llvm tool code.
This includes just LC_LINKER_OPTION load command.
llvm-svn: 283939
The tail duplication pass uses an assumed layout when making duplication
decisions. This is fine, but passes up duplication opportunities that
may arise when blocks are outlined. Because we want the updated CFG to
affect subsequent placement decisions, this change must occur during
placement.
In order to achieve this goal, TailDuplicationPass is split into a
utility class, TailDuplicator, and the pass itself. The pass delegates
nearly everything to the TailDuplicator object, except for looping over
the blocks in a function. This allows the same code to be used for tail
duplication in both places.
This change, in concert with outlining optional branches, allows
triangle shaped code to perform much better, esepecially when the
taken/untaken branches are correlated, as it creates a second spine when
the tests are small enough.
Issue from previous rollback fixed, and a new test was added for that
case as well. Issue was worklist/scheduling/taildup issue in layout.
Issue from 2nd rollback fixed, with 2 additional tests. Issue was
tail merging/loop info/tail-duplication causing issue with loops that share
a header block.
Issue with early tail-duplication of blocks that branch to a fallthrough
predecessor fixed with test case: tail-dup-branch-to-fallthrough.ll
Differential revision: https://reviews.llvm.org/D18226
llvm-svn: 283934
Summary:
This test is allowed to run on non-x86 hosts and thus must use
llvm-nm rather than nm.
Differential Revision: https://reviews.llvm.org/D25473
llvm-svn: 283901
The non-obvious motivation for adding this fold (which already happens in InstCombine)
is that we want to canonicalize IR towards select instructions and canonicalize DAG
nodes towards boolean math. So we need to recreate some folds in the DAG to handle that
change in direction.
An interesting implementation difference for cases like this is that InstCombine
generally works top-down while the DAG goes bottom-up. That means we need to detect
different patterns. In this case, the SimplifyDemandedBits fold prevents us from
performing a zext to sext fold that would then be recognized as a negation of a sext.
llvm-svn: 283900
The high registers are not allocatable in Thumb1 functions, but they
could still be used by inline assembly, so we need to save and restore
the callee-saved high registers (r8-r11) in the prologue and epilogue.
This is complicated by the fact that the Thumb1 push and pop
instructions cannot access these registers. Therefore, we have to move
them down into low registers before pushing, and move them back after
popping into low registers.
In most functions, we will have low registers that are also being
pushed/popped, which we can use as the temporary registers for
saving/restoring the high registers. However, this is not guaranteed, so
we may need to push some extra low registers to ensure that the high
registers can be saved/restored. For correctness, it would be sufficient
to use just one low register, but if we have enough low registers
available then we only need one push/pop instruction, rather than one
per high register.
We can also use the argument/return registers when they are not live,
and the link register when saving (but not restoring), reducing the
number of extra registers we need to push.
There are still a few extreme edge cases where we need two push/pop
instructions, because not enough low registers can be made live in the
prologue or epilogue.
In addition to the regression tests included here, I've also tested this
using a script to generate functions which clobber different
combinations of registers, have different numbers of argument and return
registers (including variadic arguments), allocate different fixed sized
objects on the stack, and do or don't use variable sized allocas and the
__builtin_return_address intrinsic (all of which affect the available
registers in the prologue and epilogue). I ran these functions in a test
harness which verifies that all of the callee-saved registers are
correctly preserved.
Differential Revision: https://reviews.llvm.org/D24228
llvm-svn: 283867
Currently, the Int_eh_sjlj_dispatchsetup intrinsic is marked as
clobbering all registers, including floating-point registers that may
not be present on the target. This is technically true, as we could get
linked against code that does use the FP registers, but that will not
actually work, as the soft-float code cannot save and restore the FP
registers. SjLj exception handling can only work correctly if either all
or none of the code is built for a target with FP registers. Therefore,
we can assume that, when Int_eh_sjlj_dispatchsetup is compiled for a
soft-float target, it is only going to be linked against other
soft-float code, and so only clobbers the general-purpose registers.
This allows us to check that no non-savable registers are clobbered when
generating the prologue/epilogue.
Differential Revision: https://reviews.llvm.org/D25180
llvm-svn: 283866
Allow instructions such as 'cmp w0, #(end - start)' by folding the
expression into a constant. For ELF, we fold only if the symbols are in
the same section. For MachO, we fold if the expression contains only
symbols that are not linker visible.
Fixes https://llvm.org/bugs/show_bug.cgi?id=18920
Differential Revision: https://reviews.llvm.org/D23834
llvm-svn: 283862
Bot does not like it: http://lab.llvm.org:8011/builders/sanitizer-x86_64-linux-fast/builds/17075
/mnt/b/sanitizer-buildbot3/sanitizer-x86_64-linux-fast/build/llvm/test/Object/invalid.test:70:32: error: expected string not found in input
INVALID-SEC-ADDRESS-ALIGNMENT: Invalid address alignment of section headers
^
<stdin>:1:1: note: scanning from here
/mnt/b/sanitizer-buildbot3/sanitizer-x86_64-linux-fast/build/llvm/include/llvm/Object/ELF.h:412:7: runtime error: upcast of misaligned address 0x000002d8b899 for type 'llvm::object::Elf_Shdr_Impl<llvm::object::ELFType<llvm::support::endianness::little, true> >', which requires 2 byte alignment
^
<stdin>:1:125: note: possible intended match here
/mnt/b/sanitizer-buildbot3/sanitizer-x86_64-linux-fast/build/llvm/include/llvm/Object/ELF.h:412:7: runtime error: upcast of misaligned address 0x000002d8b899 for type 'llvm::object::Elf_Shdr_Impl<llvm::object::ELFType<llvm::support::endianness::little, true> >', which requires 2 byte alignment
llvm-svn: 283858
This reverts commit r283842.
test/CodeGen/X86/tail-dup-repeat.ll causes and llc crash with our
internal testing. I'll share a link with you.
llvm-svn: 283857
This changes MachineRegisterInfo to be initializes after parsing all
instructions. This is in preparation for upcoming commits that allow the
register class specification on the operand or deduce them from the
MCInstrDesc.
This commit removes the unused feature of having nonsequential register
numbers. This was confusing anyway as the vreg numbers would be
different after parsing when you had "holes" in your numbering.
This patch also introduces the concept of an incomplete virtual
register. An incomplete virtual register may be used during .mir parsing
to construct MachineOperands without knowing the exact register class
(or register bank) yet.
NFC except for some error messages.
Differential Revision: https://reviews.llvm.org/D22397
llvm-svn: 283848
Peter Collingbourne