RISC-V would like to use a struct of scalable vectors to return multiple
values from intrinsics. This woud also be needed for target independent
intrinsics like llvm.sadd.overflow.
This patch removes the existing restriction for this. I've modified
StructType::isSized to consider a struct containing scalable vectors
as unsized so the verifier won't allow loads/stores/allocas of these
structs.
Reviewed By: sdesmalen
Differential Revision: https://reviews.llvm.org/D94142
The x86_amx is used for AMX intrisics. <256 x i32> is bitcast to x86_amx when
it is used by AMX intrinsics, and x86_amx is bitcast to <256 x i32> when it
is used by load/store instruction. So amx intrinsics only operate on type x86_amx.
It can help to separate amx intrinsics from llvm IR instructions (+-*/).
Thank Craig for the idea. This patch depend on https://reviews.llvm.org/D87981.
Differential Revision: https://reviews.llvm.org/D91927
Apart from getting the entry in the table (which is already a
separate function), the remaining logic is different for all
alignment types and is better combined with getAlignment().
This is a minor efficiency improvement, and should make further
improvements like using separate storage for different alignment
types simpler.
Information for pointer size/alignment/etc is queried a lot, but
the binary search based implementation makes this fairly slow.
Add an explicit check for address space zero and skip the search
in that case -- we need to specially handle the zero address space
anyway, as it serves as the fallback for all address spaces that
were not explicitly defined.
I initially wanted to simply replace the binary search with a
linear search, which would handle both address space zero and the
general case efficiently, but I was not sure whether there are
any degenerate targets that use more than a handful of declared
address spaces (in-tree, even AMDGPU only declares six).
This is similar to the existing alloca and program address spaces (D37052)
and should be used when creating/accessing global variables.
We need this in our CHERI fork of LLVM to place all globals in address space 200.
This ensures that values are accessed using CHERI load/store instructions
instead of the normal MIPS/RISC-V ones.
The problem this is trying to fix is that most of the time the type of
globals is created using a simple PointerType::getUnqual() (or ::get() with
the default address-space value of 0). This does not work for us and we get
assertion/compilation/instruction selection failures whenever a new call
is added that uses the default value of zero.
In our fork we have removed the default parameter value of zero for most
address space arguments and use DL.getProgramAddressSpace() or
DL.getGlobalsAddressSpace() whenever possible. If this change is accepted,
I will upstream follow-up patches to use DL.getGlobalsAddressSpace() instead
of relying on the default value of 0 for PointerType::get(), etc.
This patch and the follow-up changes will not have any functional changes
for existing backends with the default globals address space of zero.
A follow-up commit will change the default globals address space for
AMDGPU to 1.
Reviewed By: dylanmckay
Differential Revision: https://reviews.llvm.org/D70947
This patch changes ElementCount so that the Min and Scalable
members are now private and can only be accessed via the get
functions getKnownMinValue() and isScalable(). In addition I've
added some other member functions for more commonly used operations.
Hopefully this makes the class more useful and will reduce the
need for calling getKnownMinValue().
Differential Revision: https://reviews.llvm.org/D86065
Existing implementation always aborts on syntax errors in a DataLayout
description. While this is meaningful for consuming textual IR modules, it is
inconvenient for users that may need fine-grained control over the layout from,
e.g., command-line options. Propagate errors through the parsing functions and
only abort in the top-level parsing function instead.
Reviewed By: mehdi_amini
Differential Revision: https://reviews.llvm.org/D85650
Summary:
D80831 changed part of the prefix usage for AIX.
But there are other places getting prefix from DataLayout.
This patch intends to make prefix usage consistent on AIX.
Reviewed by: hubert.reinterpretcast, daltenty
Differential Revision: https://reviews.llvm.org/D81270
Fixed an issue in DataLayout::getIntPtrType where we were assuming
the input type was always a fixed vector type, which isn't true.
Added a test that exposed the problem to:
Transforms/InstCombine/vector_gep1.ll
Differential Revision: https://reviews.llvm.org/D82294
This is cleaning up comments (mostly in the bitcode handling) about
removing some backward compatibility aspect in the 4.0 release.
Historically, "4.0" was used during the development of the 3.x
versions as "this future major breaking change version". At the time
the major number was used to indicate the compatibility. When we
reached 3.9 we decided to change the numbering, instead of going to
3.10 we went to 4.0 but after changing the meaning of the major
number to not mean anything anymore with respect to bitcode backward
compatibility.
The current policy
(https://llvm.org/docs/DeveloperPolicy.html#ir-backwards-compatibility)
indicates only now:
The current LLVM version supports loading any bitcode since version 3.0.
Differential Revision: https://reviews.llvm.org/D82514
This has two advantages: one, it's simpler, and two, it doesn't require
heroic pattern matching with scalable vectors.
Also includes a small fix to DataLayout to allow the scalable vector
testcase to work correctly.
Differential Revision: https://reviews.llvm.org/D82061
Summary:
The BFloat IR type is introduced to provide support for, initially, the BFloat16
datatype introduced with the Armv8.6 architecture (optional from Armv8.2
onwards). It has an 8-bit exponent and a 7-bit mantissa and behaves like an IEEE
754 floating point IR type.
This is part of a patch series upstreaming Armv8.6 features. Subsequent patches
will upstream intrinsics support and C-lang support for BFloat.
Reviewers: SjoerdMeijer, rjmccall, rsmith, liutianle, RKSimon, craig.topper, jfb, LukeGeeson, sdesmalen, deadalnix, ctetreau
Subscribers: hiraditya, llvm-commits, danielkiss, arphaman, kristof.beyls, dexonsmith
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D78190
When calculating the natural alignment for scalable vectors it
is acceptable to calculate an allocation size based on the minimum
number of elements in the vector.
This code path is exercised by an existing test:
CodeGen/AArch64/sve-intrinsics-int-arith.ll
Differential Revision: https://reviews.llvm.org/D79475
This is how it should've been and brings it more in line with
std::string_view. There should be no functional change here.
This is mostly mechanical from a custom clang-tidy check, with a lot of
manual fixups. It uncovers a lot of minor inefficiencies.
This doesn't actually modify StringRef yet, I'll do that in a follow-up.
Summary:
This is a follow up on https://reviews.llvm.org/D71473#inline-647262.
There's a caveat here that `Align(1)` relies on the compiler understanding of `Log2_64` implementation to produce good code. One could use `Align()` as a replacement but I believe it is less clear that the alignment is one in that case.
Reviewers: xbolva00, courbet, bollu
Subscribers: arsenm, dylanmckay, sdardis, nemanjai, jvesely, nhaehnle, hiraditya, kbarton, jrtc27, atanasyan, jsji, Jim, kerbowa, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D73099
GEP index size can be specified in the DataLayout, introduced in D42123. However, there were still places
in which getIndexSizeInBits was used interchangeably with getPointerSizeInBits. This notably caused issues
with Instcombine's visitPtrToInt; but the unit tests was incorrect, so this remained undiscovered.
This fixes the buildbot failures.
Differential Revision: https://reviews.llvm.org/D68328
Patch by Joseph Faulls!
GEP index size can be specified in the DataLayout, introduced in D42123. However, there were still places
in which getIndexSizeInBits was used interchangeably with getPointerSizeInBits. This notably caused issues
with Instcombine's visitPtrToInt; but the unit tests was incorrect, so this remained undiscovered.
Differential Revision: https://reviews.llvm.org/D68328
Patch by Joseph Faulls!
* Adds a TypeSize struct to represent the known minimum size of a type
along with a flag to indicate that the runtime size is a integer multiple
of that size
* Converts existing size query functions from Type.h and DataLayout.h to
return a TypeSize result
* Adds convenience methods (including a transparent conversion operator
to uint64_t) so that most existing code 'just works' as if the return
values were still scalars.
* Uses the new size queries along with ElementCount to ensure that all
supported instructions used with scalable vectors can be constructed
in IR.
Reviewers: hfinkel, lattner, rkruppe, greened, rovka, rengolin, sdesmalen
Reviewed By: rovka, sdesmalen
Differential Revision: https://reviews.llvm.org/D53137
llvm-svn: 374042
Summary: Removes a not so useful function from DataLayout and cleans up Support/MathExtras.h
Reviewers: courbet
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D66691
llvm-svn: 369824
Use this feature to fix a bug on ARM where 4 byte alignment is
incorrectly assumed.
Differential Revision: https://reviews.llvm.org/D57335
llvm-svn: 355685
Use this feature to fix a bug on ARM where 4 byte alignment is
incorrectly assumed.
Differential Revision: https://reviews.llvm.org/D57335
llvm-svn: 355585
Use this feature to fix a bug on ARM where 4 byte alignment is
incorrectly assumed.
Differential Revision: https://reviews.llvm.org/D57335
llvm-svn: 355522
to reflect the new license.
We understand that people may be surprised that we're moving the header
entirely to discuss the new license. We checked this carefully with the
Foundation's lawyer and we believe this is the correct approach.
Essentially, all code in the project is now made available by the LLVM
project under our new license, so you will see that the license headers
include that license only. Some of our contributors have contributed
code under our old license, and accordingly, we have retained a copy of
our old license notice in the top-level files in each project and
repository.
llvm-svn: 351636
Motivated by the discussion in D38499, this patch updates BasicAA to support
arbitrary pointer sizes by switching most remaining non-APInt calculations to
use APInt. The size of these APInts is set to the maximum pointer size (maximum
over all address spaces described by the data layout string).
Most of this translation is straightforward, but this patch contains a fix for
a bug that revealed itself during this translation process. In order for
test/Analysis/BasicAA/gep-and-alias.ll to pass, which is run with 32-bit
pointers, the intermediate calculations must be performed using 64-bit
integers. This is because, as noted in the patch, when GetLinearExpression
decomposes an expression into C1*V+C2, and we then multiply this by Scale, and
distribute, to get (C1*Scale)*V + C2*Scale, it can be the case that, even
through C1*V+C2 does not overflow for relevant values of V, (C2*Scale) can
overflow. If this happens, later logic will draw invalid conclusions from the
(base) offset value. Thus, when initially applying the APInt conversion,
because the maximum pointer size in this test is 32 bits, it started failing.
Suspicious, I created a 64-bit version of this test (included here), and that
failed (miscompiled) on trunk for a similar reason (the multiplication can
overflow).
After fixing this overflow bug, the first test case (at least) in
Analysis/BasicAA/q.bad.ll started failing. This is also a 32-bit test, and was
relying on having 64-bit intermediate values to have BasicAA return an accurate
result. In order to fix this problem, and because I believe that it is not
uncommon to use i64 indexing expressions in 32-bit code (especially portable
code using int64_t), it seems reasonable to always use at least 64-bit
integers. In this way, we won't regress our analysis capabilities (and there's
a command-line option added, so experimenting with this should be easy).
As pointed out by Eli during the review, there are other potential overflow
conditions that this patch does not address. Fixing those is left to follow-up
work.
Patch by me with contributions from Michael Ferguson (mferguson@cray.com).
Differential Revision: https://reviews.llvm.org/D38662
llvm-svn: 350220
This should more accurately reflect what the AsmPrinter will actually
do.
This is NFC, as far as I can tell; all the places that might be affected
already have an extra check to avoid using the result of
getPreferredAlignment in this situation.
Differential Revision: https://reviews.llvm.org/D51377
llvm-svn: 340999
This is a recommit of r333506, which was reverted in r333518.
The original commit message is below.
In r325551 many calls of malloc/calloc/realloc were replaces with calls of
their safe counterparts defined in the namespace llvm. There functions
generate crash if memory cannot be allocated, such behavior facilitates
handling of out of memory errors on Windows.
If the result of *alloc function were checked for success, the function was
not replaced with the safe variant. In these cases the calling function made
the error handling, like:
T *NewElts = static_cast<T*>(malloc(NewCapacity*sizeof(T)));
if (NewElts == nullptr)
report_bad_alloc_error("Allocation of SmallVector element failed.");
Actually knowledge about the function where OOM occurred is useless. Moreover
having a single entry point for OOM handling is convenient for investigation
of memory problems. This change removes custom OOM errors handling and
replaces them with calls to functions `llvm::safe_*alloc`.
Declarations of `safe_*alloc` are moved to a separate include file, to avoid
cyclic dependency in SmallVector.h
Differential Revision: https://reviews.llvm.org/D47440
llvm-svn: 334344
This is a recommit of r333390, which was reverted in r333395, because it
caused cyclic dependency when building shared library `LLVMDemangle.so`.
In this commit `ItaniumDemangler.cpp` was not changed.
The original commit message is below.
In r325551 many calls of malloc/calloc/realloc were replaces with calls of
their safe counterparts defined in the namespace llvm. There functions
generate crash if memory cannot be allocated, such behavior facilitates
handling of out of memory errors on Windows.
If the result of *alloc function were checked for success, the function was
not replaced with the safe variant. In these cases the calling function made
the error handling, like:
T *NewElts = static_cast<T*>(malloc(NewCapacity*sizeof(T)));
if (NewElts == nullptr)
report_bad_alloc_error("Allocation of SmallVector element failed.");
Actually knowledge about the function where OOM occurred is useless. Moreover
having a single entry point for OOM handling is convenient for investigation
of memory problems. This change removes custom OOM errors handling and
replaces them with calls to functions `llvm::safe_*alloc`.
Declarations of `safe_*alloc` are moved to a separate include file, to avoid
cyclic dependency in SmallVector.h
Differential Revision: https://reviews.llvm.org/D47440
llvm-svn: 333506
In r325551 many calls of malloc/calloc/realloc were replaces with calls of
their safe counterparts defined in the namespace llvm. There functions
generate crash if memory cannot be allocated, such behavior facilitates
handling of out of memory errors on Windows.
If the result of *alloc function were checked for success, the function was
not replaced with the safe variant. In these cases the calling function made
the error handling, like:
T *NewElts = static_cast<T*>(malloc(NewCapacity*sizeof(T)));
if (NewElts == nullptr)
report_bad_alloc_error("Allocation of SmallVector element failed.");
Actually knowledge about the function where OOM occurred is useless. Moreover
having a single entry point for OOM handling is convenient for investigation
of memory problems. This change removes custom OOM errors handling and
replaces them with calls to functions `llvm::safe_*alloc`.
Declarations of `safe_*alloc` are moved to a separate include file, to avoid
cyclic dependency in SmallVector.h
Differential Revision: https://reviews.llvm.org/D47440
llvm-svn: 333390
Summary:
This adds initial support for letting targets specify which address
spaces their functions should reside in by default.
If a function is created by a frontend, it will get the default address space specified in the DataLayout, unless the frontend explicitly uses a more general `llvm::Function` constructor. Function address spaces will become a part of the bitcode and textual IR forms, as we do not have access to a data layout whilst parsing LL.
It will be possible to write IR that explicitly has `addrspace(n)` on a function. In this case, the function will reside in the specified space, ignoring the default in the DL.
This is the first step towards placing functions into the correct
address space for Harvard architectures.
Full patchset
* Add program address space to data layout D37052
* Require address space to be specified when creating functions D37054
* [clang] Require address space to be specified when creating functions D37057
Reviewers: pcc, arsenm, kparzysz, hfinkel, theraven
Reviewed By: theraven
Subscribers: arichardson, simoncook, rengolin, wdng, uabelho, bjope, asb, llvm-commits
Differential Revision: https://reviews.llvm.org/D37052
llvm-svn: 325479
Making a width of GEP Index, which is used for address calculation, to be one of the pointer properties in the Data Layout.
p[address space]:size:memory_size:alignment:pref_alignment:index_size_in_bits.
The index size parameter is optional, if not specified, it is equal to the pointer size.
Till now, the InstCombiner normalized GEPs and extended the Index operand to the pointer width.
It works fine if you can convert pointer to integer for address calculation and all registered targets do this.
But some ISAs have very restricted instruction set for the pointer calculation. During discussions were desided to retrieve information for GEP index from the Data Layout.
http://lists.llvm.org/pipermail/llvm-dev/2018-January/120416.html
I added an interface to the Data Layout and I changed the InstCombiner and some other passes to take the Index width into account.
This change does not affect any in-tree target. I added tests to cover data layouts with explicitly specified index size.
Differential Revision: https://reviews.llvm.org/D42123
llvm-svn: 325102
As a follow up of the bad alloc handler patch, this patch introduces nullptr checks on pointers returned from the
malloc/realloc/calloc functions. In addition some memory size assignments are moved behind the allocation
of the corresponding memory to fulfill exception safe memory management (RAII).
patch by Klaus Kretzschmar
Differential Revision: https://reviews.llvm.org/D35414
llvm-svn: 308576
I did this a long time ago with a janky python script, but now
clang-format has built-in support for this. I fed clang-format every
line with a #include and let it re-sort things according to the precise
LLVM rules for include ordering baked into clang-format these days.
I've reverted a number of files where the results of sorting includes
isn't healthy. Either places where we have legacy code relying on
particular include ordering (where possible, I'll fix these separately)
or where we have particular formatting around #include lines that
I didn't want to disturb in this patch.
This patch is *entirely* mechanical. If you get merge conflicts or
anything, just ignore the changes in this patch and run clang-format
over your #include lines in the files.
Sorry for any noise here, but it is important to keep these things
stable. I was seeing an increasing number of patches with irrelevant
re-ordering of #include lines because clang-format was used. This patch
at least isolates that churn, makes it easy to skip when resolving
conflicts, and gets us to a clean baseline (again).
llvm-svn: 304787
Craig Topper