the feature flag is essential for RDPKRU and WRPKRU instruction
more about the instruction can be found in the SDM rev 56, vol 2 from http://www.intel.com/sdm
Differential Revision: http://reviews.llvm.org/D15491
llvm-svn: 255644
This is a very simple implementation of a thread pool using C++11
thread. It accepts any std::function<void()> for asynchronous
execution. Individual task can be synchronize using the returned
future, or the client can block on the full queue completion.
In case LLVM is configured with Threading disabled, it falls back
to sequential execution using std::async with launch:deferred.
This is intended to support parallelism for ThinLTO processing in
linker plugin, but is generic enough for any other uses.
This is a recommit of r255444 ; trying to workaround a bug in the
MSVC 2013 standard library. I think I was hit by:
http://connect.microsoft.com/VisualStudio/feedbackdetail/view/791185/std-packaged-task-t-where-t-is-void-or-a-reference-class-are-not-movable
Recommit of r255589, trying to please g++ as well.
Differential Revision: http://reviews.llvm.org/D15464
From: mehdi_amini <mehdi_amini@91177308-0d34-0410-b5e6-96231b3b80d8>
llvm-svn: 255593
This is a very simple implementation of a thread pool using C++11
thread. It accepts any std::function<void()> for asynchronous
execution. Individual task can be synchronize using the returned
future, or the client can block on the full queue completion.
In case LLVM is configured with Threading disabled, it falls back
to sequential execution using std::async with launch:deferred.
This is intended to support parallelism for ThinLTO processing in
linker plugin, but is generic enough for any other uses.
This is a recommit of r255444 ; trying to workaround a bug in the
MSVC 2013 standard library. I think I was hit by:
http://connect.microsoft.com/VisualStudio/feedbackdetail/view/791185/std-packaged-task-t-where-t-is-void-or-a-reference-class-are-not-movable
Differential Revision: http://reviews.llvm.org/D15464
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 255589
This is a very simple implementation of a thread pool using C++11
thread. It accepts any std::function<void()> for asynchronous
execution. Individual task can be synchronize using the returned
future, or the client can block on the full queue completion.
In case LLVM is configured with Threading disabled, it falls back
to sequential execution using std::async with launch:deferred.
This is intended to support parallelism for ThinLTO processing in
linker plugin, but is generic enough for any other uses.
Differential Revision: http://reviews.llvm.org/D15464
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 255444
I am seeing disappointing clang performance on a large PowerPC64
Linux box. GetRandomNumberSeed() does a buffered read from
/dev/urandom to seed its PRNG. As a result we read an entire page
even though we only need 4 bytes.
With every clang task reading a page worth of /dev/urandom we
end up spending a large amount of time stuck on kernel spinlock.
Patch by Anton Blanchard!
llvm-svn: 255386
Introduced DIMacro and DIMacroFile debug info metadata in the LLVM IR to support macros.
Differential Revision: http://reviews.llvm.org/D14687
llvm-svn: 255245
Add ARMv8.2-A to TargetParser, so that it can be used by the clang
command-line options and the .arch directive.
Most testing of this will be done in clang, checking that the
command-line options that this enables work.
Differential Revision: http://reviews.llvm.org/D15037
llvm-svn: 254400
(This is the second attempt to submit this patch. The first caused two assertion
failures and was reverted. See https://llvm.org/bugs/show_bug.cgi?id=25687)
The patch in http://reviews.llvm.org/D13745 is broken into four parts:
1. New interfaces without functional changes (http://reviews.llvm.org/D13908).
2. Use new interfaces in SelectionDAG, while in other passes treat probabilities
as weights (http://reviews.llvm.org/D14361).
3. Use new interfaces in all other passes.
4. Remove old interfaces.
This patch is 3+4 above. In this patch, MBB won't provide weight-based
interfaces any more, which are totally replaced by probability-based ones.
The interface addSuccessor() is redesigned so that the default probability is
unknown. We allow unknown probabilities but don't allow using it together
with known probabilities in successor list. That is to say, we either have a
list of successors with all known probabilities, or all unknown
probabilities. In the latter case, we assume each successor has 1/N
probability where N is the number of successors. An assertion checks if the
user is attempting to add a successor with the disallowed mixed use as stated
above. This can help us catch many misuses.
All uses of weight-based interfaces are now updated to use probability-based
ones.
Differential revision: http://reviews.llvm.org/D14973
llvm-svn: 254377
and the follow-up r254356: "Fix a bug in MachineBlockPlacement that may cause assertion failure during BranchProbability construction."
Asserts were firing in Chromium builds. See PR25687.
llvm-svn: 254366
The patch in http://reviews.llvm.org/D13745 is broken into four parts:
1. New interfaces without functional changes (http://reviews.llvm.org/D13908).
2. Use new interfaces in SelectionDAG, while in other passes treat probabilities
as weights (http://reviews.llvm.org/D14361).
3. Use new interfaces in all other passes.
4. Remove old interfaces.
This patch is 3+4 above. In this patch, MBB won't provide weight-based
interfaces any more, which are totally replaced by probability-based ones.
The interface addSuccessor() is redesigned so that the default probability is
unknown. We allow unknown probabilities but don't allow using it together
with known probabilities in successor list. That is to say, we either have a
list of successors with all known probabilities, or all unknown
probabilities. In the latter case, we assume each successor has 1/N
probability where N is the number of successors. An assertion checks if the
user is attempting to add a successor with the disallowed mixed use as stated
above. This can help us catch many misuses.
All uses of weight-based interfaces are now updated to use probability-based
ones.
Differential revision: http://reviews.llvm.org/D14973
llvm-svn: 254348
Summary:
This follows D14577 to treat ARMv6-J as an alias for ARMv6,
instead of an architecture in its own right.
The functional change is that the default CPU when targeting ARMv6-J
changes from arm1136j-s to arm1136jf-s, which is currently used as
the default CPU for ARMv6; both are, in fact, ARMv6-J CPUs.
The J-bit (Jazelle support) is irrelevant to LLVM, and it doesn't
affect code generation, attributes, optimizations, or anything else,
apart from selecting the default CPU.
Reviewers: rengolin, logan, compnerd
Subscribers: aemerson, llvm-commits, rengolin
Differential Revision: http://reviews.llvm.org/D14755
llvm-svn: 253675
Summary:
This patch changes the behavior of path::system_temp_directory() on Windows to be closer to GetTempPath Windows API call. Enforces path separator to be the native one, makes path absolute, etc. GetTempPath is not used directly because of limitations/implementation bugs on Windows 7.
Windows specific unit tests are added. Most of them runs in separated process with modified environment variables.
This change fixes FileSystemTest.CreateDir unittest that had been failing when run from Unix-like shell on Windows (Unix-like path separator (/) used in env variables).
Reviewers: chapuni, rafael, aaron.ballman
Subscribers: rafael, llvm-commits
Differential Revision: http://reviews.llvm.org/D14231
llvm-svn: 253345
setExecutable() should do everything that's needed to make the memory
executable on host, i.e. unconditionally set permissions + invalidate
instruction cache. llvm-rtdyld will be updated in my next commit.
Discusseed with: Lang Hames (as part of D13631).
llvm-svn: 253341
Useful utility function; this wasn't too hard to do before, but also wasn't
obviously discoverable. Make it explicit. Reviewed offline by Michael
Gottesman.
llvm-svn: 253254
Summary:
* ARMv6KZ is the "canonical" name, given in the ARMARM
* ARMv6Z is an "official abbreviation" for it, mentioned in the ARMARM
* ARMv6ZK is a popular misspelling, which we should support as an alias.
The patch corrects the handling of the names.
Functional changes:
* ARMv6Z no longer treated as an architecture in its own right
* ARMv6ZK renamed to ARMv6KZ, accepting ARMv6ZK as an alias
* arm1176jz-s and arm1176jzf-s recognized as ARMv6ZK, instead of ARMv6K
* default ARMv6K CPU changed to arm1176j-s
Reviewers: rengolin, logan, compnerd
Subscribers: aemerson, llvm-commits, rengolin
Differential Revision: http://reviews.llvm.org/D14568
llvm-svn: 253206
Summary:
* declare FPUNames, ARCHNames, ARCHExtNames, HWDivNames, CPUNames
as static const
* implement getDefaultExtensions with a StringSwitch, in the same
way getDefaultFPU is implemented
Reviewers: rengolin
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D14648
llvm-svn: 253201
Instead of defaulting to an empty string, we want to default to
the CPU 'generic' in the case of no valid default CPU being found,
(as long as the architecture is actually valid).
In order to do this we add a default FPU for each architecture, as
well as falling back to architecture defaults for extensions and FPU
in the case of a generic CPU is specified.
llvm-svn: 253198
Summary:
This patch changes ARMV5, ARMV5E, ARMV6SM, ARMV6HL, ARMV7, ARMV7L,
ARMV7HL, ARMV7EM to be treated as aliases for the corresponding
standard architectures, instead of as actual architectures.
Reviewers: rengolin
Subscribers: aemerson, llvm-commits, rengolin
Differential Revision: http://reviews.llvm.org/D14577
llvm-svn: 252903
Added "macro" option to "-debug-dump" flag, which trigger parsing and dumping of the ".debug_macinfo" section.
Differential Revision: http://reviews.llvm.org/D14294
llvm-svn: 252866
This patch adds DWARF values for the Delphi language and Borland C++
language extensions.
Reviewed by: dblaikie
Subscribers: llvm-commits, majnemer
Differential Revision: http://reviews.llvm.org/D14522
llvm-svn: 252776
Summary: Inlined callsites need to be emitted in debug info so that sample profile can be annotated to the correct inlined instance.
Reviewers: dnovillo, dblaikie
Subscribers: dblaikie, llvm-commits
Differential Revision: http://reviews.llvm.org/D14511
llvm-svn: 252768
llvm/lib/Support/Signals.cpp:66:13: warning: unused function 'printSymbolizedStackTrace' [-Wunused-function]
llvm/lib/Support/Signals.cpp:52:13: warning: function 'findModulesAndOffsets' has internal linkage but is not defined [-Wundefined-internal]
llvm-svn: 252418
Summary:
In general GetTempDir follows the same logic as the replaced code: checks env variables TMP, TEMP, USERPROFILE in order. However, it also perform other checks like making separators native (\), making the path absolute, etc.
This change fixes FileSystemTest.CreateDir unittest that had been failing when run from Unix-like shell on Windows (Unix-like path separator (/) used in env variables).
Reviewers: chapuni, rafael, aaron.ballman
Subscribers: rafael, llvm-commits
Differential Revision: http://reviews.llvm.org/D14231
llvm-svn: 252366
Summary:
llvm-symbolizer understands both PDBs and DWARF, so it is more likely to
succeed at symbolization. If llvm-symbolizer is unavailable, we will
fall back to dbghelp. This also makes our crash traces more similar
between Windows and Linux.
Reviewers: Bigcheese, zturner, chapuni
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D12884
llvm-svn: 252118
Summary:
The new function sys::path::user_cache_directory tries to discover
a directory suitable for cache storage for current system user.
On Windows and Darwin it returns a path to system-specific user cache directory.
On Linux it follows XDG Base Directory Specification, what is:
- use non-empty $XDG_CACHE_HOME env var,
- use $HOME/.cache.
Reviewers: chapuni, aaron.ballman, rafael
Subscribers: rafael, aaron.ballman, llvm-commits
Differential Revision: http://reviews.llvm.org/D13801
llvm-svn: 251784
These MachO file directives are used by linkers and other tools to provide
compatibility information, much like the existing .ios_version_min and
.macosx_version_min.
llvm-svn: 251569
GNU tools require elfiamcu to take up the entire OS field, so, e.g.
i?86-*-linux-elfiamcu is not considered a legal triple.
Make us compatible.
Differential Revision: http://reviews.llvm.org/D14081
llvm-svn: 251390
This adds support for the i?86-*-elfiamcu triple, which indicates the IAMCU psABI is used.
Differential Revision: http://reviews.llvm.org/D13977
llvm-svn: 251222
This list is produced by llvm-config --system-libs to be used
by external programs using the llvm libraries, such as creduce.
In r250501 llvm/Support/Windows/Path.inc started to use the constant
FOLDERID_Profile from libuuid.
llvm-svn: 251201
Summary: This patch replaces usage of deprecated SHGetFolderPathW with SHGetKnownFolderPath. The usage of SHGetKnownFolderPath is wrapped to allow queries for other "known" folders in the near future.
Reviewers: aaron.ballman, gbedwell
Subscribers: chapuni, llvm-commits
Differential Revision: http://reviews.llvm.org/D13753
llvm-svn: 250501
This patch adds the underlying infrastructure for an AVR backend to be included into LLVM. It is the first of a series of patches aimed at moving the out-of-tree AVR backend into the tree.
It consists of adding a new`Triple` target 'avr'.
llvm-svn: 250492
A PDB can be thought of as a very simple file system. It is
occasionally illuminating to see the contents of the underlying files.
Differential Revision: http://reviews.llvm.org/D13674
llvm-svn: 250356
On Windows, fs::rename() could fail is another process was reading the
file at the same time using fs::openFileForRead(). In most cases the user
wouldn't notice as fs::rename() will continue to retry for 2000ms. Typically
this is enough for the read to complete and a retry to succeed, but if the
disk is being it too hard then the response time might be longer than the
retry time and the rename would fail with a permission error.
Add FILE_SHARE_DELETE to the sharing flags for CreateFileW() in
fs::openFileForRead() and try ReplaceFileW() prior to MoveFileExW()
in fs::rename().
Based on an initial patch by Edd Dawson!
Differential Revision: http://reviews.llvm.org/D13647
llvm-svn: 250046
Stop relying on ilist implicit conversions from `value_type&` to
`iterator` in YAMLParser.cpp.
I eventually want to outlaw this entirely. It encourages
`getNextNode()` and `getPrevNode()` in iterator logic, which is
extremely fragile (and relies on them never returning `nullptr`).
FTR, there's nothing nefarious going on in this case, it was just easy
to clean up since the callers really wanted iterators to begin with.
llvm-svn: 249767
Problem was in SearchPathW function that does not attach an extension if file already has one.
That does not work for executables like ld.lld2 for example which require to have .exe extension but SearchPath thinks that its "lld2".
Solution was to add the extension manually.
Differential Revision: http://reviews.llvm.org/D13536
llvm-svn: 249696
llvm::format compiles down to snprintf which has no defined rounding for
floating point arguments, and MSVC has implemented it differently from
what the BSD libcs and glibc do. Try to emulate the glibc rounding
behavior to avoid changing tests.
While there simplify code a bit and move trivial methods inline.
llvm-svn: 248665
BranchProbability now is represented by its numerator and denominator in uint32_t type. This patch changes this representation into a fixed point that is represented by the numerator in uint32_t type and a constant denominator 1<<31. This is quite similar to the representation of BlockMass in BlockFrequencyInfoImpl.h. There are several pros and cons of this change:
Pros:
1. It uses only a half space of the current one.
2. Some operations are much faster like plus, subtraction, comparison, and scaling by an integer.
Cons:
1. Constructing a probability using arbitrary numerator and denominator needs additional calculations.
2. It is a little less precise than before as we use a fixed denominator. For example, 1 - 1/3 may not be exactly identical to 1 / 3 (this will lead to many BranchProbability unit test failures). This should not matter when we only use it for branch probability. If we use it like a rational value for some precise calculations we may need another construct like ValueRatio.
One important reason for this change is that we propose to store branch probabilities instead of edge weights in MachineBasicBlock. We also want clients to use probability instead of weight when adding successors to a MBB. The current BranchProbability has more space which may be a concern.
Differential revision: http://reviews.llvm.org/D12603
llvm-svn: 248633
Currently, the availability of DSP instructions (ACLE 6.4.7) is handled in a
hand-rolled tricky condition block in tools/clang/lib/Basic/Targets.cpp, with
a FIXME: attached.
This patch changes the handling of +t2dsp to be in line with other
architecture extensions.
Following a revert of r248152 and new review comments, this patch also includes
renaming FeatureDSPThumb2 -> FeatureDSP, hasThumb2DSP() -> hasDSP(), etc.
The spelling of "t2dsp" is preserved, pending a further investigation of its
possible external usage.
Differential Revision: http://reviews.llvm.org/D12937
llvm-svn: 248519
Because mod is always exact, this function should have never taken a rounding mode argument. The actual implementation still has issues, which I'll look at resolving in a subsequent patch.
llvm-svn: 248195
Currently, the availability of DSP instructions (ACLE 6.4.7) is handled in a
hand-rolled tricky condition block in tools/clang/lib/Basic/Targets.cpp, with
a FIXME: attached.
This patch changes the handling of +t2dsp to be in line with other
architecture extensions.
Following review comments, also updating the description of FeatureDSPThumb2
in ARM.td.
Differential Revision: http://reviews.llvm.org/D12937
llvm-svn: 248152
The change was accidentally undone by r245290.
Original log message:
When calling DisplayGraph and a PS viewer is chosen, two programs are executed: The GraphViz generator and the PostScript viewer. Always wait for the generator to finish to ensure that the .ps file is written before opening the viewer for that file. DisplayGraph's wait parameter refers to whether to wait until the user closes the viewer.
This happened on Windows and if none of the options to open the .dot file directly applies, also on Linux.
Differential Revision: http://reviews.llvm.org/D11876
llvm-svn: 247980
Summary:
This is the first patch in the series to migrate Triple's (which are ambiguous)
to TargetTuple's (which aren't).
For the moment, TargetTuple simply passes all requests to the Triple object it
holds. Once it has replaced Triple, it will start to implement the interface in
a more suitable way.
This change makes some changes to the public C++ API. In particular,
InitMCSubtargetInfo(), createMCRelocationInfo(), and createMCSymbolizer()
now take TargetTuples instead of Triples. The other public C++ API's have
been left as-is for the moment to reduce patch size.
This commit also contains a trivial patch to clang to account for the C++ API
change. Thanks go to Pavel Labath for fixing LLDB for me.
Reviewers: rengolin
Subscribers: jyknight, dschuff, arsenm, rampitec, danalbert, srhines, javed.absar, dsanders, echristo, emaste, jholewinski, tberghammer, ted, jfb, llvm-commits, rengolin
Differential Revision: http://reviews.llvm.org/D10969
llvm-svn: 247692
Summary:
This is the first patch in the series to migrate Triple's (which are ambiguous)
to TargetTuple's (which aren't).
For the moment, TargetTuple simply passes all requests to the Triple object it
holds. Once it has replaced Triple, it will start to implement the interface in
a more suitable way.
This change makes some changes to the public C++ API. In particular,
InitMCSubtargetInfo(), createMCRelocationInfo(), and createMCSymbolizer()
now take TargetTuples instead of Triples. The other public C++ API's have
been left as-is for the moment to reduce patch size.
This commit also contains a trivial patch to clang to account for the C++ API
change.
Reviewers: rengolin
Subscribers: jyknight, dschuff, arsenm, rampitec, danalbert, srhines, javed.absar, dsanders, echristo, emaste, jholewinski, tberghammer, ted, jfb, llvm-commits, rengolin
Differential Revision: http://reviews.llvm.org/D10969
llvm-svn: 247683
Source code was assuming that llvm-config.h would be included somehow but
up to r247253 that added #include "llvm/Support/Compiler.h" to StringRef.h
the config file was not actually included. The inclusion of llvm-config.h
caused a change of behaviour in tools/clang/test/Frontend/source-col-map.c:
previously it would output the original UTF-8 but now it outputs <U+03B1>.
llvm-svn: 247409
When the driver tries to locate a program by its name, e.g. a linker, it
scans the paths provided by the toolchain using the ScanDirForExecutable
function. If the lookup fails, the driver uses
llvm::sys::findProgramByName. Unlike llvm::sys::findProgramByName,
ScanDirForExecutable is not aware of file extensions. If the program has
the "exe" extension in its name, which is very common on Windows,
ScanDirForExecutable won't find it under the toolchain-provided paths.
This patch changes the Windows version of the "`can_execute`" function
called by ScanDirForExecutable to respect file extensions, similarly to
llvm::sys::findProgramByName.
Patch by Oleg Ranevskyy
Reviewers: rnk
Differential Revision: http://reviews.llvm.org/D12711
llvm-svn: 247358
and tremendously less reliant on the optimizer to fix things.
The code is always necessarily looking for the entire length of the
string when doing the equality tests in this find implementation, but it
previously was needlessly re-checking the size each time among other
annoyances.
By writing this so simply an ddirectly in terms of memcmp, it also is
about 8x faster in a debug build, which in turn makes FileCheck about 2x
faster in 'ninja check-llvm'. This saves about 8% of the time for
FileCheck-heavy parts of the test suite like the x86 backend tests.
llvm-svn: 247269
re-using the resulting components rather than repeatedly splitting and
re-splitting to compute each component as part of the initializer list.
This is more work on PR23676. Sadly, it doesn't help much. It removes
the constructor from my profile, but doesn't make a sufficient dent in
the total time. But it should play together nicely with subsequent
changes.
llvm-svn: 247250
with the StringRef::split method when used with a MaxSplit argument
other than '-1' (which nobody really does today, but which should
actually work).
The spec claimed both to split up to MaxSplit times, but also to append
<= MaxSplit strings to the vector. One of these doesn't make sense.
Given the name "MaxSplit", let's go with it being a max over how many
*splits* occur, which means the max on how many strings get appended is
MaxSplit+1. I'm not actually sure the implementation correctly provided
this logic either, as it used a really opaque loop structure.
The implementation was also playing weird games with nullptr in the data
field to try to rely on a totally opaque hidden property of the split
method that returns a pair. Nasty IMO.
Replace all of this with what is (IMO) simpler code that doesn't use the
pair returning split method, and instead just finds each separator and
appends directly. I think this is a lot easier to read, and it most
definitely matches the spec. Added some tests that exercise the corner
cases around StringRef() and StringRef("") that all now pass.
I'll start using this in code in the next commit.
llvm-svn: 247249
on StringRef. Finding and splitting on a single character is
substantially faster than doing it on even a single character StringRef
-- we immediately get to a *very* tuned memchr call this way.
Even nicer, we get to this even in a debug build, shaving 18% off the
runtime of TripleTest.Normalization, helping PR23676 some more.
llvm-svn: 247244
COFF sections are accompanied with an auxiliary symbol which includes a
checksum. This checksum used to be filled with just zero but this seems
to upset LINK.exe when it is processing a /INCREMENTAL link job.
Instead, fill the CheckSum field with the JamCRC of the section
contents. This matches MSVC's behavior.
This fixes PR19666.
N.B. A rather simple implementation of JamCRC is given. It implements
a byte-wise calculation using the method given by Sarwate. There are
implementations with higher throughput like slice-by-eight and making
use of PCLMULQDQ. We can switch to one of those techniques if it turns
out to be a significant use of time.
llvm-svn: 246590
architecture string is something quite weird. Similarly delay calling
the BPF parsing code, although that is more reasonable.
To understand why I was motivated to make this change, it cuts the time
for running the ADT TripleTest unittests by a factor of two in
non-optimized builds (the developer default) and reduces my 'check-llvm'
time by a full 15 seconds. The implementation of parseARMArch is *that*
slow. I tried to fix it in the prior series of commits, but frankly,
I have no idea how to finish fixing it. The entire premise of the
function (to allow 'v7a-unknown-linux' or some such to parse as an
'arm-unknown-linux' triple) seems completely insane to me, but I'll let
the ARM folks sort that out. At least it is now out of the critical path
of every developer working on LLVM. It also will likely make some other
folks' code significantly faster as I've heard reports of 2% of time
spent in triple parsing even in optimized builds!
I'm not done making this code faster, but I am done trying to improve
the ARM target parsing code.
llvm-svn: 246378
of its strings when expanding the string literals from the macros, and
push all of the APIs to be StringRef instead of C-string APIs.
This (remarkably) removes a very non-trivial number of strlen calls. It
even deletes code and complexity from one of the primary users -- Clang.
llvm-svn: 246374
the necessary tables.
This will allow me to restructure the code and structures using this to
be significantly more efficient. It also removes the duplication of the
list of several enumerators. It also enshrines that the order of
enumerators match the order of the entries in the tables, something the
implementation code actually uses.
No functionality changed (yet).
llvm-svn: 246370
parsing logic prior to making substantial changes to it.
This parsing logic is incredibly wasteful, so I'm planning to rewrite
it. Just unittesting the triple parsing logic spends well over 80% of
its time in the ARM parsing logic, and others have measured significant
time spent here in real production compiles.
Stay tuned...
llvm-svn: 246369
Summary: Adds accessor functions for all the fields in llvm::fltSemantics. This will be used in MergeFunctions to order two APFloats with different semanatics.
Author: jrkoenig
Reviewers: jfb
Subscribers: dschuff, llvm-commits
Differential revision: http://reviews.llvm.org/D12253
llvm-svn: 245999
Remove support for Valgrind-based TSan, which hasn't been maintained for a
few years. We now use the TSan annotations only if LLVM is compiled with
-fsanitize=thread. We no longer need the weak function definitions as we
are guaranteed that our program is linked directly with the TSan runtime.
Differential Revision: http://reviews.llvm.org/D12121
llvm-svn: 245374
Summary: Windows system rarely have good PostScript viewers installed, but PDF viewers are common. So for viewing graphs, generate PDF files and open with the associated PDF viewer using cmd.exe's start command.
Reviewers: Bigcheese, aaron.ballman
Subscribers: aaron.ballman, JakeVanAdrighem, dwiberg, llvm-commits
Differential Revision: http://reviews.llvm.org/D11877
llvm-svn: 245290
Summary:
When calling DisplayGraph and a PS viewer is chosen, two programs are executed: The GraphViz generator and the PostScript viewer. Always for the generator to finish to ensure that the .ps file is written before opening the viewer for that file. DisplayGraph's wait parameter refers to whether to wait until the user closes the viewer.
This happened on Windows and if none of the options to open the .dot file directly applies, also on Linux.
Reviewers: Bigcheese, chandlerc, aaron.ballman
Subscribers: dwiberg, aaron.ballman, llvm-commits
Differential Revision: http://reviews.llvm.org/D11876
llvm-svn: 245289
WebAssembly doesn't yet have a specified binary format, and it may not
end up being ELF, so we don't want the Triple class defaulting to ELF
for it at this time.
llvm-svn: 245254
The arch prefix string isn't currently being used for anything on
WebAssembly, but if it were to be used, it makes sense to use the
same arch prefix string for wasm32 and wasm64.
llvm-svn: 245252
This is a very minimal move support - it leaves the moved-from object in
a zombie state that is only valid for destruction and move assignment.
This seems fine to me, and leaving it in the default constructed state
would require adding more state to the object and potentially allocating
memory (!!!) and so seems like a Bad Idea.
llvm-svn: 245192
Although targeting CoreCLR is similar to targeting MSVC, there are
certain important differences that the backend must be aware of
(e.g. differences in stack probes, EH, and library calls).
Differential Revision: http://reviews.llvm.org/D11012
llvm-svn: 245115
This patch makes the Darwin ARM backend take advantage of TargetParser. It
also teaches TargetParser about ARMV7K for the first time. This makes target
triple parsing more consistent across llvm.
Differential Revision: http://reviews.llvm.org/D11996
llvm-svn: 245081
This is faster and avoids the stream and SmallString state synchronization issue.
resync() is a no-op and may be safely deleted. I'll do so in a follow-up commit.
Reviewed by Rafael Espindola.
llvm-svn: 244870
PrettyStackTraceHead is a LLVM_THREAD_LOCAL, which means it's just a global
in LLVM_ENABLE_THREADS=NO builds. If a CrashRecoveryContext is used with
code that uses PrettyStackEntries, and a crash happens, PrettyStackTraceHead is
currently not reset to its pre-crash value. These functions make it possible
to add a cleanup to such code that does this.
(Not reseting the value then causes the assert in ~PrettyStackTraceEntry() to
fire if the code outside of the CrashRecoveryContext also uses
PrettyStackEntries -- for example, clang when building a module.)
Part of PR11974.
llvm-svn: 244338
libclang uses a CrashRecoveryContext, and building a module does too. If a
module gets built through libclang, nested CrashRecoveryContexts are used. They
work fine with threads as things are stored in ThreadLocal variables, but in
LLVM_ENABLE_THREADS=OFF builds the two recovery contexts would write to the
same globals.
To fix, keep active CrashRecoveryContextImpls in a list and have the global
point to the innermost one, and do something similar for
tlIsRecoveringFromCrash.
Necessary (but not sufficient) for PR11974 and PR20325
http://reviews.llvm.org/D11770
llvm-svn: 244251
If we don't have sys/wait.h and we're on a unix system there's no way
that several of the llvm tools work at all. This includes clang.
Just remove the configure and cmake checks entirely - we'll get a
build error instead of building something broken now.
llvm-svn: 243957
While theoratically required in pre-C++11 to avoid re-allocation upon call,
C++11 guarantees that c_str() returns a pointer to the internal array so
pre-calling c_str() is no longer required.
llvm-svn: 242983
And expose it in Signals.h, allowing clients to call it directly,
possibly LLVMErrorHandler which currently calls RunInterruptHandlers
but not RunSignalHandlers, thus for example not printing the stack
backtrace on Unixish OSes. On Windows it does happen because
RunInterruptHandlers ends up calling the callbacks as well via
Cleanup(). This difference in behaviour and code structures in
*/Signals.inc should be patched in the future.
llvm-svn: 242936
Move CallBacksToRun into the common Signals.cpp, create RunCallBacksToRun()
and use these in both Unix/Signals.inc and Windows/Signals.inc.
Lots of potential code to be merged here.
llvm-svn: 242925
- Changed the default FPU of cortex-m4.
- Removed "cortex-m4f" entry. Currently not supported.
Change-Id: I73121e358aa9e7ba68eb001c2143df390ff2352a
Phabricator: http://reviews.llvm.org/D11100
llvm-svn: 242528
- ARM V7L matches the 'A' profile of ARM architecture.
Change-Id: I80c8b973f5c93fb040c177a227644d56b1b83ea8
Phabricator: http://reviews.llvm.org/D11261
llvm-svn: 242406
Revert "-Added API for retrieving the default FPU of a CPU from TargetParser."
This reverts commit 01199ab0c6ff2d5c4f6b2c05a95ec011e41c4669.
llvm-svn: 242147
The newly added function returns the size of the specified floating
point semantics in bits.
Differential revision: http://reviews.llvm.org/D8413
llvm-svn: 241793
This patch changes linkage with dbghlp.dll for clang from static (at load time)
to on demand (at the first use of required functions). Clang uses dbghlp.dll
only in minor use-cases. First of all in case of crash and in case of plugin load.
The dbghlp.dll library can be absent on system. In this case clang will fail
to load. With lazy load of dbghlp.dll clang can work even if dbghlp.dll
is not available.
Differential Revision: http://reviews.llvm.org/D10737
llvm-svn: 241271
By default, the GraphWriter code assumes that the generic file open
program (`open` on Apple, `xdg-open` on other systems) can wait on the
forked proces to complete. When the fork ends, the code would delete
the temporary dot files created, and return.
On GNU/Linux, the xdg-open program does not have a "wait for your fork
to complete before dying" option. So the behaviour was that xdg-open
would launch a process, quickly die itself, and then the GraphWriter
code would think its OK to quickly delete all the temporary files.
Once the temporary files were deleted, the dot viewers would get very
upset, and often give you weird errors.
This change only waits on the generic open program on Apple platforms.
Elsewhere, we don't wait on the process, and hence we don't try and
clean up the temporary files.
llvm-svn: 241250
This unbreaks TripleTest.Normalization. We'll have to come up with a new
plan for the OS component of the target triple for WebAssembly.
llvm-svn: 241041
Reapplies r241005 after fixing the build on non-Mac platforms. Original
commit message below.
The hostname can be very unstable when there are many machines on the
network competing for the same name. Using the hardware UUID makes it
less likely to have collisions or to consider files written by the
current host to be owned by a different one at a later time.
rdar://problem/21512307
llvm-svn: 241012
The hostname can be very unstable when there are many machines on the
network competing for the same name. Using the hardware UUID makes it
less likely to have collisions or to consider files written by the
current host to be owned by a different one at a later time.
rdar://problem/21512307
llvm-svn: 241005
Make sure to remove the unique lock file, which is what the .lock
symlink points to, if there is a signal while the lock is held. This
will release the lock, since the symlink will point to nothing (already
tested in unit tests). For good measure, also clean up the unique lock
file if there is an error or signal before the lock is acquired.
I will add a clang test.
rdar://problem/21512307
llvm-svn: 240967
removing default label in switch as it results.
This is part of earlier commit http://reviews.llvm.org/D1064
Subscribers: llvm-commits
llvm-svn: 240932
Some of the the permissible ARM -mfpu options, which are supported in GCC,
are currently not present in llvm/clang.This patch adds the options:
'neon-fp16', 'vfpv3-fp16', 'vfpv3-d16-fp16', 'vfpv3xd' and 'vfpv3xd-fp16.
These are related to half-precision floating-point and single precision.
Reviewers: rengolin, ranjeet.singh
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D10645
llvm-svn: 240930
This commit moves the APSInt initialization code that's used by
the LLLexer class into a new APSInt constructor that constructs
APSInts from strings.
This change is useful for MIR Serialization, as it would allow
the MILexer class to use the same APSInt initialization as
LLexer when parsing immediate machine operands.
llvm-svn: 240436
The patch is generated using this command:
tools/clang/tools/extra/clang-tidy/tool/run-clang-tidy.py -fix \
-checks=-*,llvm-namespace-comment -header-filter='llvm/.*|clang/.*' \
llvm/lib/
Thanks to Eugene Kosov for the original patch!
llvm-svn: 240137
This commit connects the machine function analysis pass (which creates machine
functions) to the MIR parser, which will initialize the machine functions
with the state from the MIR file and reconstruct the machine IR.
This commit introduces a new interface called 'MachineFunctionInitializer',
which can be used to provide custom initialization for the machine functions.
This commit also introduces a new diagnostic class called
'DiagnosticInfoMIRParser' which is used for MIR parsing errors.
This commit modifies the default diagnostic handling in LLVMContext - now the
the diagnostics are printed directly into llvm::errs() so that the MIR parsing
errors can be printed with colours.
Reviewers: Justin Bogner
Differential Revision: http://reviews.llvm.org/D9928
llvm-svn: 239753
As noted on Errc.h:
// * std::errc is just marked with is_error_condition_enum. This means that
// common patters like AnErrorCode == errc::no_such_file_or_directory take
// 4 virtual calls instead of two comparisons.
And on some libstdc++ those virtual functions conclude that
------------------------
int main() {
std::error_code foo = std::make_error_code(std::errc::no_such_file_or_directory);
return foo == std::errc::no_such_file_or_directory;
}
-------------------------
should exit with 0.
llvm-svn: 239683
StringSaver now always saves to a BumpPtrAllocator.
The only reason for having the virtual saveImpl is so lld can have a
thread safe version.
The reason for the distinct BumpPtrStringSaver class is to avoid the
virtual destructor.
llvm-svn: 239669
Based on ArchType, Clang's driver can select a non-Clang compiler.
String parsing in Clang would have sufficed if it were only that,
however this change anticipates true llvm support.
Differential Revision: http://reviews.llvm.org/D10413
llvm-svn: 239631
ARMTargetParser::getFPUFeatures should disable fp16 whenever it
disables vfp4, as otherwise something like -mcpu=cortex-a7 -mfpu=none
leaves us with fp16 enabled (though the only effect that will have is
a wrong build attribute).
Differential Revision: http://reviews.llvm.org/D10397
llvm-svn: 239599
static local initialization isn't thread safe with MSVC and a race was
reported in PR23817. We can't use std::atomic because it's not trivially
constructible, so instead do some lame volatile global integer
manipulation.
llvm-svn: 239566
This represents some of the functionality we expose in the llvmlite Python
binding.
Patch by Antoine Pitrou
Differential Revision: http://reviews.llvm.org/D10222
llvm-svn: 239411
Summary:
If malloc/realloc fails then the SmallVector becomes unusable since begin() and
end() will return NULL. This is unlikely to occur but was the cause of recent
bugpoint test failures on my machine.
It is not clear whether not checking for malloc/realloc failure is a deliberate
decision and adding checks has the potential to impact compiler performance.
Therefore, this patch only adds the check to builds with assertions enabled for
the moment.
Reviewers: bkramer
Reviewed By: bkramer
Subscribers: bkramer, llvm-commits
Differential Revision: http://reviews.llvm.org/D9520
llvm-svn: 239392
These are added mainly for the benefit of clang, but this also means that they
are now allowed in .fpu directives and we emit the correct .fpu directive when
single-precision-only is used.
Differential Revision: http://reviews.llvm.org/D10238
llvm-svn: 239151
Add getFPUFeatures to TargetParser, which gets the list of subtarget features
that are enabled/disabled for each FPU, and use it when handling the .fpu
directive.
No functional change in this commit, though clang will start behaving
differently once it starts using this.
Differential Revision: http://reviews.llvm.org/D10237
llvm-svn: 239150
Summary:
1) The only caller, ARMTargetParser::parseArch, uses the results for an "endswith" test; so, including the "arm" prefix into the result is unnecessary.
2) Most ARMTargetParser::parseArch callers pass it the output from ARMTargetParser::getCanonicalArchName; so, make this behaviour the default. Then, including the "arm" prefix into the cases is unnecessary.
Reviewers: rengolin
Reviewed By: rengolin
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D10249
llvm-svn: 239099
Summary:
-march=bpf -> host endian
-march=bpf_le -> little endian
-match=bpf_be -> big endian
Test Plan:
v1 was tested by IBM s390 guys and appears to be working there.
It bit rots too fast here.
Reviewers: chandlerc, tstellarAMD
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D10177
llvm-svn: 239071
This allows us to extract version numbers from the environment.
getOSVersion is currently overloaded for that purpose, this allows us to
clean it up.
llvm-svn: 238796
The plan was to move the whole table into the already existing ArchExtNames
but some fields depend on a table-generated file, and we don't yet have this
feature in the generic lib/Support side.
Once the minimum target-specific table-generated files are available in a
generic fashion to these libraries, we'll have to keep it in the ASM parser.
llvm-svn: 238651
Summary:
We would wrap flow mappings and sequences when they go over a hardcoded 70
characters limit. Make the wrapping column configurable (and default to 70
co the change should be NFC for current users). Passing 0 allows to completely
suppress the wrapping which makes it easier to handle in tools like FileCheck.
Reviewers: bogner
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D10109
llvm-svn: 238584
Now that most of the methods in Clang and LLVM that were parsing arch/cpu/fpu
strings are using ARMTargetParser, it's time to make it a bit more conforming
with what the ABI says.
This commit adds some clarification on what build attributes are accepted and
which are "non-standard". It also makes clear that the "defaultCPU" and
"defaultArch" methods were really just build attribute getters.
It also diverges from GCC's behaviour to say that armv2/armv3 are really an
ARMv4 in the build attributes, when the ABI has a clear state for that: Pre-v4.
llvm-svn: 238344
This commit a 3rd attempt at comitting the initial MIR serialization patch.
The first commit (r237708) was reverted in 237730. Then the second commit
(r237954) was reverted in r238007, as the MIR library under CodeGen caused
a circular dependency where the CodeGen library depended on MIR and MIR
library depended on CodeGen.
This commit has fixed the dependencies between CodeGen and MIR by
reorganizing the MIR serialization code - the code that prints out
MIR has been moved to CodeGen, and the MIR library has been renamed
to MIRParser. Now the CodeGen library doesn't depend on the
MIRParser library, thus the circular dependency no longer exists.
--Original Commit Message--
MIR Serialization: print and parse LLVM IR using MIR format.
This commit is the initial commit for the MIR serialization project.
It creates a new library under CodeGen called 'MIR'. This new
library adds a new machine function pass that prints out the LLVM IR
using the MIR format. This pass is then added as a last pass when a
'stop-after' option is used in llc. The new library adds the initial
functionality for parsing of MIR files as well. This commit also
extends the llc tool so that it can recognize and parse MIR input files.
Reviewers: Duncan P. N. Exon Smith, Matthias Braun, Philip Reames
Differential Revision: http://reviews.llvm.org/D9616
llvm-svn: 238341
Using getCanonicalArchName() is the right way to parse ARM arch names.
Mapping ARMTargetParser IDs to Triple Arch IDs is temporary, until they
are merged into a TargetDescription class.
This was the last LLVM FIXME to move things to ARMTargetParser. Now on
to Clang and beyond.
llvm-svn: 238110
Before, getCanonicalArchName was relying on parseArch() to validate the arch
name, which was a problem when other methods, that also needed to call it,
were duplicating the steps.
But to dissociate getCanonicalArchName from parseArch, we needed to make
getCanonicalArchName more robust in detecting valid arch names. It's still
not perfect, but will do for the time being, until we merge Triple with
TargetParser into a TargetDescription mega class.
llvm-svn: 238047
This allows us to match armv6m to default to thumb, but will also be used by
Clang's driver and remove the current incomplete copy in it.
llvm-svn: 238036
This commit is a 2nd attempt at committing the initial MIR serialization patch.
The first commit (r237708) made the incremental buildbots unstable and was
reverted in r237730. The original commit didn't add a terminating null
character to the LLVM IR source which was passed to LLParser, and this
sometimes caused the test 'llvmIR.mir' to fail with a parsing error because
the LLVM IR source didn't have a null character immediately after the end
and thus LLLexer encountered some garbage characters that ultimately caused
the error.
This commit also includes the other test fixes I committed in
r237712 (llc path fix) and r237723 (remove target triple) which
also got reverted in r237730.
--Original Commit Message--
MIR Serialization: print and parse LLVM IR using MIR format.
This commit is the initial commit for the MIR serialization project.
It creates a new library under CodeGen called 'MIR'. This new
library adds a new machine function pass that prints out the LLVM IR
using the MIR format. This pass is then added as a last pass when a
'stop-after' option is used in llc. The new library adds the initial
functionality for parsing of MIR files as well. This commit also
extends the llc tool so that it can recognize and parse MIR input files.
Reviewers: Duncan P. N. Exon Smith, Matthias Braun, Philip Reames
Differential Revision: http://reviews.llvm.org/D9616
llvm-svn: 237954
The commit null terminates the string value in the `yaml::BlockScalarNode`
class.
This change is motivated by the initial MIR serialization commit (r237708)
that I reverted in r237730 because the LLVM IR source from the block
scalar node wasn't terminated by a null character and thus the buildbots
failed on one testcase sometimes. This change enables me to recommit
the reverted commit.
llvm-svn: 237942
The existing code for method StreamingMemoryObject.fetchToPos does not respect
the corresonding call to setKnownObjectSize(). As a result, it allows the
StreamingMemoryObject to read bytes past the object size.
This patch provides a test case, and code to fix the problem.
Patch by Karl Schimpf
Differential Revision: http://reviews.llvm.org/D8931
llvm-svn: 237939
Simplifying Triple::parseARMArch, leaving all the parsing to ARMTargetParser.
This commit also adds AArch64 detection to ARMTargetParser canonicalization,
and a two RedHat arch names (v{6,7}hl, meaning hard-float / little-endian).
Adding enough unit tests to cover the basics. Clang checks fine.
llvm-svn: 237902
First ARMTargetParser FIXME, conservatively changing the way we parse CPUs
in the back-end. Still not perfect, with a lot of special cases, but moving
towards a more generic solution.
Moving all logic to the target parser made some unwritten assumptions
about architectures in Clang to break. I've added a lot of architectures
required by Clang, and default to CPUs that Clang believes it should
(and I agree).
I've also added a lot of unit tests, with the correct CPU for each
architecture, and Clang seems to be working correctly, too.
It also became clear that using "unsigned ID" as the argument for the get
methods makes it hard to know what ID, so I also changed the argument names
to match the enum type names.
llvm-svn: 237797
The incremental buildbots entered a pass-fail cycle where during the fail
cycle one of the tests from this commit fails for an unknown reason. I
have reverted this commit and will investigate the cause of this problem.
llvm-svn: 237730
This change implements basic support for DWARF alternate sections
proposal: http://www.dwarfstd.org/ShowIssue.php?issue=120604.1&type=open
LLVM tools now understand new forms: DW_FORM_GNU_ref_alt and
DW_FORM_GNU_strp_alt, which are used as references to .debug_info and
.debug_str sections respectively, stored in a separate file, and
possibly shared between different executables / shared objects.
llvm-dwarfdump and llvm-symbolizer don't yet know how to access this
alternate debug file (usually pointed by .gnu_debugaltlink section),
but they can at lease properly parse and dump regular files, which
refer to it.
This change should fix crashes of llvm-dwarfdump and llvm-symbolizer on
files produced by running "dwz" tool. Such files are already installed
on some modern Linux distributions.
llvm-svn: 237721
This commit is the initial commit for the MIR serialization project.
It creates a new library under CodeGen called 'MIR'. This new
library adds a new machine function pass that prints out the LLVM IR
using the MIR format. This pass is then added as a last pass when a
'stop-after' option is used in llc. The new library adds the initial
functionality for parsing of MIR files as well. This commit also
extends the llc tool so that it can recognize and parse MIR input files.
Reviewers: Duncan P. N. Exon Smith, Matthias Braun, Philip Reames
Differential Revision: http://reviews.llvm.org/D9616
llvm-svn: 237708
This commit gives the users of the YAML Traits I/O library
the ability to serialize scalars using the YAML literal block
scalar notation by allowing them to implement a specialization
of the `BlockScalarTraits` struct for their custom types.
Reviewers: Duncan P. N. Exon Smith
Differential Revision: http://reviews.llvm.org/D9613
llvm-svn: 237404
The commit r237314 that implements YAML block parsing
introduced a leak that was caught by the ASAN linux buildbot.
YAML Parser stores its tokens in an ilist, and allocates
tokens using a BumpPtrAllocator, but doesn't call the
destructor for the allocated tokens. R237314 added an
std::string field to a Token which leaked as the Token's
destructor wasn't called. This commit fixes this leak
by calling the Token's destructor when a Token is being
removed from an ilist of tokens.
llvm-svn: 237389
This commit implements the parsing of YAML block scalars.
Some code existed for it before, but it couldn't parse block
scalars.
This commit adds a new yaml node type to represent the block
scalar values.
This commit also deletes the 'spec-09-27' and 'spec-09-28' tests
as they are identical to the test file 'spec-09-26'.
This commit introduces 3 new utility functions to the YAML scanner
class: `skip_s_space`, `advanceWhile` and `consumeLineBreakIfPresent`.
Reviewers: Duncan P. N. Exon Smith
Differential Revision: http://reviews.llvm.org/D9503
llvm-svn: 237314
sys/time.h on Solaris (and possibly other systems) defines "SEC" as "1"
using a cpp macro. The result is that this fails to compile.
Fixes https://llvm.org/PR23482
llvm-svn: 237112
The TargetRegistry is just a namespace-like class, instantiated in one
place to use a range-based for loop. Instead, expose access to the
registry via a range-based 'targets()' function instead. This makes most
uses a bit awkward/more verbose - but eventually we should just add a
range-based find_if function which will streamline these functions. I'm
happy to mkae them a bit awkward in the interim as encouragement to
improve the algorithms in time.
llvm-svn: 237059
This new class in a global context contain arch-specific knowledge in order
to provide LLVM libraries, tools and projects with the ability to understand
the architectures. For now, only FPU, ARCH and ARCH extensions on ARM are
supported.
Current behaviour it to parse from free-text to enum values and back, so that
all users can share the same parser and codes. This simplifies a lot both the
ASM/Obj streamers in the back-end (where this came from), and the front-end
parsers for command line arguments (where this is going to be used next).
The previous implementation, using .def/.h includes is deprecated due to its
inflexibility to be built without the backend support and for being too
cumbersome. As more architectures join this scheme, and as more features of
such architectures are added (such as hardware features, type sizes, etc) into
a full blown TargetDescription class, having a set of classes is the most
sane implementation.
The ultimate goal of this refactor both LLVM's and Clang's target description
classes into one unique interface, so that we can de-duplicate and standardise
the descriptions, as well as make it available for other front-ends, tools,
etc.
The FPU parsing for command line options in Clang has been converted to use
this new library and a number of aliases were added for compatibility:
* A bogus neon-vfpv3 alias (neon defaults to vfp3)
* armv5/v6
* {fp4/fp5}-{sp/dp}-d16
Next steps:
* Port Clang's ARCH/EXT parsing to use this library.
* Create a TableGen back-end to generate this information.
* Run this TableGen process regardless of which back-ends are built.
* Expose more information and rename it to TargetDescription.
* Continue re-factoring Clang to use as much of it as possible.
llvm-svn: 236900
Restructure Triple::getARMCPUForArch so that invalid values will
return nullptr, while retaining the behaviour that an argument
specifying no particular architecture version will give a default
CPU. This will be used by clang to give an error on invalid -march
values.
Also restructure the extraction of the architecture version from
the MArch string a little to hopefully make what it's doing clearer.
Differential Revision: http://reviews.llvm.org/D9599
llvm-svn: 236845
This commit enables the tests located in test/YAMLParser directory.
Those tests were never actually enabled, as llvm-lit didn't pick up the
files with the 'data' extension. The commit renames those test files to files
with the 'test' extension so that llvm-lit would find them.
This commit also modifies yaml-bench so that it returns an error status
if an error occurred during parsing. It also adds the '-use-color'
command line option to yaml-bench (to make sure that file check matches
the error messages in the output stream).
This commit modifies some of the renamed tests so that they wouldn't
fail. It gets rid of XFAILs and uses the 'not' command instead for
some of the tests that have to fail during parsing. This commit
also adds some 'FIXME' comments to a couple of tests that are
supposed to fail but currently pass because of various bugs
in the implementation of the yaml parser.
Reviewers: Justin Bogner
Differential Revision: http://reviews.llvm.org/D9448
llvm-svn: 236754
Fix two other variables that might cause the same hang fixed in r235914.
The hang is caused by constructing ManagedStatic in signalhandler. In
this case, if FileToRemove or CallBacksToRun is not contructed, it means
there is no work to do.
llvm-svn: 236741
This commit extracts the code that skips over a YAML comment from
the 'scanToNextToken' method into a separate 'skipComment' method.
This refactoring is motivated by a patch that implements parsing
of YAML block scalars (http://reviews.llvm.org/D9503), as the
method that parses a block scalar reuses the 'skipComment' method.
llvm-svn: 236663
ole32 is considered a default library with MSVC, but apparently
not with MinGW. Since we use CoInitialize, we need to explicitly
link against it in LLVMSupport for a MinGW build.
llvm-svn: 236654
This patch adds support for the z13 processor type and its vector facility,
and adds MC support for all new instructions provided by that facilily.
Apart from defining the new instructions, the main changes are:
- Adding VR128, VR64 and VR32 register classes.
- Making FP64 a subclass of VR64 and FP32 a subclass of VR32.
- Adding a D(V,B) addressing mode for scatter/gather operations
- Adding 1-, 2-, and 3-bit immediate operands for some 4-bit fields.
Until now all immediate operands have been the same width as the
underlying field (hence the assert->return change in decode[SU]ImmOperand).
In addition, sys::getHostCPUName is extended to detect running natively
on a z13 machine.
Based on a patch by Richard Sandiford.
llvm-svn: 236520
This patch adds an optional 'flow' field to the MappingTrait
class so that yaml IO will be able to output flow mappings.
Reviewers: Justin Bogner
Differential Revision: http://reviews.llvm.org/D9450
llvm-svn: 236456
After r210687, windows_error does nothing but call mapWindowsError.
Other Windows/*.inc files directly call mapWindowsError. This patch
updates Path.inc and Process.inc to do the same.
llvm-svn: 236409
This patch fixes a bug where the YAML Output class emitted
a sequence of flow sequences without the '-' characters.
Before:
seq:
[ a, b ]
[ c, d ]
After:
seq:
- [ a, b ]
- [ c, d ]
Reviewers: Justin Bogner
Differential Revision: http://reviews.llvm.org/D9206
llvm-svn: 236329
We need to dereference the signals mutex during handler registration so that we force its construction. This is to prevent the first use being during handling an actual signal because you can't safely allocate memory in a signal handler.
llvm-svn: 235914
Summary: This patch fixes step D4 of Knuth's division algorithm implementation. Negative sign of the step result was not always detected due to incorrect "borrow" handling.
Test Plan: Unit test that reveals the bug included.
Reviewers: chandlerc, yaron.keren
Reviewed By: yaron.keren
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D9196
llvm-svn: 235699
The current implementations could exhibit some behavior differences:
raw_fd_ostream: Whatever the underlying fd does with seek+write. In a normal
file, the write position would be back to the old offset.
raw_svector_ostream: The write position is always the end of the stream, so
after pwrite the write position would be the new end. This matches what OS_X
(all BSD?) do with a pwrite in a O_APPEND fd.
Given that we don't need that feature and don't use O_APPEND a lot in LLVM,
just disallow it.
I am open to suggestions on renaming pwrite to something else, but this fixes
the issue for now.
Thanks to Yaron Keren for reporting it.
llvm-svn: 235303
Now we don't have to do 2 synchronized passes to compute offsets and then
write the file.
This also includes a fix for the corner case of seeking in /dev/null. It
is not an error, but on some systems (Linux) the returned offset is
always 0. An error is signaled by returning -1. This is checked by
the existing tests now that "clang -o /dev/null ..." seeks.
llvm-svn: 234952
Original message.
Have one raw_fd_ostream constructor forward to the other.
This fixes some odd behaviour differences between the two. In particular,
the version that takes a FD no longer unconditionally sets stdout to binary.
llvm-svn: 234734
Asaf Badouh