Change the calculation for the desired ValueType for non-sign
extending loads, as in those cases we don't care about the
higher bits. This creates a smaller ExtVT and allows for such
combinations as:
(srl (zextload i16, [addr]), 8) -> (zextload i8, [addr + 1])
Differential Revision: https://reviews.llvm.org/D40034
llvm-svn: 318390
The LatencyPriorityQueue doesn't currently check whether the SU being removed really exists in the Queue.
This method fails quietly when SU is not found and removes the last element from the Queue, leading to unexpected behavior.
Unfortunately, this only occurs on our custom target, with the custom scheduler. In our case, when remove() is invoked, it removes the wrong SU at the end of the Queue, which is only discovered later when VerifyScheduledDAG() is invoked and finds that some nodes were not scheduled at all.
As this is only reproducible with a lot of proprietary code, I'm hopeful this assert is straightforward enough to not necessitate a test.
Patch by Ondrej Glasnak!
Differential Revision: https://reviews.llvm.org/D40084
llvm-svn: 318387
This patch contains more accurate cost of interelaved load\store of stride 2 for the types int64\double on AVX2.
Reviewers: delena, RKSimon, craig.topper, dorit
Reviewed By: dorit
Differential Revision: https://reviews.llvm.org/D40008
llvm-svn: 318385
Summary:
Use use_nodbg_empty() rather than use_empty() in
MachineRegisterInfo::EmitLiveInCopies() when determining if a livein
register has any uses or not. Otherwise a single dbg.value can make us
generate different code, meaning -g would affect code generation.
Found when compiling code for my out-of-tree target. Unfortunately I
haven't been able to reproduce the problem on X86 or any of the other
in-tree targets that I tried, so no test case.
Reviewers: MatzeB
Reviewed By: MatzeB
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D39044
llvm-svn: 318382
When expanding exit conditions for pre- and postloops, we may end up expanding a
recurrency from the loop to in its loop's preheader. This produces incorrect IR.
This patch ensures that IRCE uses SCEVExpander correctly and only expands code which
is safe to expand in this particular location.
Differentian Revision: https://reviews.llvm.org/D39234
llvm-svn: 318381
The type legalizer will try to scalarize these operations if it sees them, but there is no handling for scalarizing them. This leads to a fatal error. With this change they will now be scalarized by the mem intrinsic scalarizing pass before SelectionDAG.
llvm-svn: 318380
For example, this is currently reachable by X86 if you use a masked store intrinsic with a v1iX type.
Using a fatal error seems like a better user experience if someone were to encounter this on a release build. There are several other similar places that have been converted from unreachable to fatal error previously.
llvm-svn: 318379
This function checks that:
1) It is safe to expand a SCEV;
2) It is OK to materialize it at the specified location.
For example, attempt to expand a loop's AddRec to the same loop's preheader should fail.
Differential Revision: https://reviews.llvm.org/D39236
llvm-svn: 318377
processDbgDeclares assumes pointer size is the same for different addr spaces.
It uses pointer size for addr space 0 for all pointers, which causes assertion
in stripAndAccumulateInBoundsConstantOffsets for amdgcn---amdgiz since
pointer in addr space 5 has different size than in addr space 0.
This patch fixes that.
Differential Revision: https://reviews.llvm.org/D40085
llvm-svn: 318370
Add hook in BPF backend so that llvm-objdump can print out
the jmp target with label names, e.g.,
...
if r1 != 2 goto 6 <LBB0_2>
...
goto 7 <LBB0_4>
...
LBB0_2:
...
LBB0_4:
...
Signed-off-by: Yonghong Song <yhs@fb.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
llvm-svn: 318358
Summary:
This patch adds a LLVM_ENABLE_GISEL_COV which, like LLVM_ENABLE_DAGISEL_COV,
causes TableGen to instrument the generated table to collect rule coverage
information. However, LLVM_ENABLE_GISEL_COV goes a bit further than
LLVM_ENABLE_DAGISEL_COV. The information is written to files
(${CMAKE_BINARY_DIR}/gisel-coverage-* by default). These files can then be
concatenated into ${LLVM_GISEL_COV_PREFIX}-all after which TableGen will
read this information and use it to emit warnings about untested rules.
This technique could also be used by SelectionDAG and can be further
extended to detect hot rules and give them priority over colder rules.
Usage:
* Enable LLVM_ENABLE_GISEL_COV in CMake
* Build the compiler and run some tests
* cat gisel-coverage-[0-9]* > gisel-coverage-all
* Delete lib/Target/*/*GenGlobalISel.inc*
* Build the compiler
Known issues:
* ${LLVM_GISEL_COV_PREFIX}-all must be generated as a manual
step due to a lack of a portable 'cat' command. It should be the
concatenation of all ${LLVM_GISEL_COV_PREFIX}-[0-9]* files.
* There's no mechanism to discard coverage information when the ruleset
changes
Depends on D39742
Reviewers: ab, qcolombet, t.p.northover, aditya_nandakumar, rovka
Reviewed By: rovka
Subscribers: vsk, arsenm, nhaehnle, mgorny, kristof.beyls, javed.absar, igorb, llvm-commits
Differential Revision: https://reviews.llvm.org/D39747
llvm-svn: 318356
Due to integer precision, we might have numerator greater than denominator in
the branch probability scaling. Add a check to prevent this from happening.
llvm-svn: 318353
Summary:
Make it possible to feed runtime information back to tablegen to enable
profile-guided tablegen-eration, detection of untested tablegen definitions, etc.
Being a cross-compiler by nature, LLVM will potentially collect data for multiple
architectures (e.g. when running 'ninja check'). We therefore need a way for
TableGen to figure out what data applies to the backend it is generating at the
time. This patch achieves that by including the name of the 'def X : Target ...'
for the backend in the TargetRegistry.
Reviewers: qcolombet
Reviewed By: qcolombet
Subscribers: jholewinski, arsenm, jyknight, aditya_nandakumar, sdardis, nemanjai, ab, nhaehnle, t.p.northover, javed.absar, qcolombet, llvm-commits, fedor.sergeev
Differential Revision: https://reviews.llvm.org/D39742
llvm-svn: 318352
Use VOP3 add/addc like usual.
This has some tradeoffs. Inline immediates fold
a little better, but other constants are worse off.
SIShrinkInstructions could be made smarter to handle
these cases.
This allows us to avoid selecting scalar adds where we
need to track the carry in scc and replace its users.
This makes it easier to use the carryless VALU adds.
llvm-svn: 318340
Move remaining inline matching of instructions of some optimizations into
separate functions, like in the other optimizations. Otherwise, NFC.
Differential revision: https://reviews.llvm.org/D40090
llvm-svn: 318335
This moves the file handling out of DwarfLinker.cpp.
This fixes what is at least an oddity if not a bug. DwarfLinker.cpp
was using ToolOutputFile, which uses RemoveFileOnSignal. The issue is
that dsymutil.cpp uses that too. It is now clear from the interface
that only dsymutil.cpp is responsible for creating and deleting files.
llvm-svn: 318334
The original -O binary implementation just copied segment data from the
object and dumped it into a file. This doesn't take into account any
operations performed on objects such as section removal. GNU objcopy has
some specific behavior that we'd also like to respect. For instance
using -O binary and -j <some_section> will dump <some_section> to a
file. This change implements GNU objcopy style -O binary to as close of
an approximation as I can determine.
Differential Revision: https://reviews.llvm.org/D39713
llvm-svn: 318324
Note that one-use and shouldChangeType() are checked ahead of the switch.
Without the narrowing folds, we can produce inferior vector code as shown in PR35299:
https://bugs.llvm.org/show_bug.cgi?id=35299
llvm-svn: 318323
This requires a small change to TempFile: allowing a discard after a
failed keep.
With this the cache now handles signals and reuses a fd instead of
reopening the file.
llvm-svn: 318322
Implements TargetLowering callback 'mayBeEmittedAsTailCall' that enables
CodeGenPrepare to duplicate returns when they might enable a tail-call.
Differential Revision: https://reviews.llvm.org/D39777
llvm-svn: 318321
InstCombine salvages debug info for every instruction it erases from its
worklist, but it wasn't doing it during its initial DCE when populating
its worklist. This fixes that.
This should help improve availability of 'this' in optimized debug info
when casts are necessary.
llvm-svn: 318320
Some CPUs are already overriding these sign extension instructions but we should be able to use the WriteALU schedule class by default.
Differential Revision: https://reviews.llvm.org/D39899
llvm-svn: 318308
Summary:
Added more remarks to SLP pass, in particular "missed" optimization remarks.
Also proposed several tests for new functionality.
Patch by Vladimir Miloserdov!
For reference you may look at: https://reviews.llvm.org/rL302811
Reviewers: anemet, fhahn
Reviewed By: anemet
Subscribers: javed.absar, lattner, petecoup, yakush, llvm-commits
Differential Revision: https://reviews.llvm.org/D38367
llvm-svn: 318307
Move the calling convention checks for tail-call eligibility for the 64-bit
SysV ABI into a separate function. This is so that it can be shared with
'mayBeEmittedAsTailCall' in a subsequent change.
llvm-svn: 318305
This is a recommit of r316869 which was speculatively reverted with r317444 and
subsequently shown to not be the cause of PR35210. That crash should be fixed
after r318237.
Original commit message:
The old PM sets the options of what used to be known as "latesimplifycfg" on the
instantiation after the vectorizers have run, so that's what we'redoing here.
FWIW, there's a later SimplifyCFGPass instantiation in both PMs where we do not
set the "late" options. I'm not sure if that's intentional or not.
Differential Revision: https://reviews.llvm.org/D39407
llvm-svn: 318299
Summary:
Prevent an issue where a diagnostic is reported multiple times by bailing out with a ParseFail if an invalid SVE register element qualifier/suffix is specified, for example:
<stdin>:10:18: error: invalid sve vector kind qualifier
add z20.h, z2.h, z31.x
^
<stdin>:10:18: error: invalid sve vector kind qualifier
add z20.h, z2.h, z31.x
...
<stdin>:10:18: error: invalid sve vector kind qualifier
add z20.h, z2.h, z31.x
^
Reviewers: fhahn, rengolin
Reviewed By: rengolin
Subscribers: aemerson, javed.absar, tschuett, llvm-commits, kristof.beyls
Differential Revision: https://reviews.llvm.org/D39894
llvm-svn: 318297
APInt is now used instead of uint64_t in function genConstMult() allowing
multiplication optimizations with constants of arbitrary length.
Patch by Milos Stojanovic.
Differential Revision: https://reviews.llvm.org/D38130
llvm-svn: 318296
Sam Parker