One unusual feature of the z architecture is that the result of a
previous load can be reused indefinitely for subsequent loads, even if
a cache-coherent store to that location is performed by another CPU.
A special serializing instruction must be used if you want to force
a load to be reattempted.
Since volatile loads are not supposed to be omitted in this way,
we should insert a serializing instruction before each such load.
The same goes for atomic loads.
The patch implements this at the IR->DAG boundary, in a similar way
to atomic fences. It is a no-op for targets other than SystemZ.
llvm-svn: 196905
For stack frames requiring realignment, three pointers may be needed:
- ebp to address incoming arguments
- esi (could be any callee-saved register) to address locals
- esp to address outgoing arguments
We would use esi unconditionally without verifying that it did not
conflict with inline assembly.
This change doesn't do the verification, it simply emits a fatal error
on functions that use stack realignment, dynamic SP adjustments, and
inline assembly.
Because stack realignment is common on Windows, we also no longer assume
that MS inline assembly clobbers esp. Instead, we analyze the inline
instructions for implicit definitions and check if esp is there. If so,
we require the use of a base pointer and consider it in the condition
above.
Mostly fixes PR16830, but we could try harder to find a non-conflicting
base pointer.
Reviewers: sunfish
Differential Revision: http://llvm-reviews.chandlerc.com/D1317
llvm-svn: 196876
MCJIT needs to be able to run in hostile environments, even when PWD
is invalid. There's no need to crash MCJIT in this case.
The obvious fix is to simply leave MCContext's CompilationDir empty
when PWD can't be determined. This way, MCJIT clients,
and other clients that link with LLVM don’t need a valid working directory.
If we do want to guarantee valid CompilationDir, that should be done
only for clients of getCompilationDir(). This is as simple as checking
for an empty string.
The only current use of getCompilationDir is EmitGenDwarfInfo, which
won’t conceivably run with an invalid working dir. However, in the
purely hypothetically and untestable case that this happens, the
AT_comp_dir will be omitted from the compilation_unit DIE.
llvm-svn: 196874
Similar to gcov, llvm-cov will now print out the block count at the end
of each block. Multiple blocks can end on the same line.
One computational difference is by using -a, llvm-cov will no longer
simply add the block counts together to form a line count. Instead, it
will take the maximum of the block counts on that line. This has a
similar effect to what gcov does, but generates more correct counts in
certain scenarios.
Also updated tests.
llvm-svn: 196856
They were out of place since the introduction of arbitrary precision integer
types.
This also synchronizes the documentation to Types.h, so it refers to first class
types and single value types.
llvm-svn: 196661
These helper classes take care of the book-keeping the drives the
GenericScheduler heuristics. It is likely that developers writing
target-specific schedulers that work similarly to GenericScheduler
will want to use these helpers too. The immediate goal is to develop a
GenericPostScheduler that can run in place of the old PostRAScheduler,
but will use the new machine model.
No functionality change intended.
llvm-svn: 196643
The sefault occurs due to an infinite loop when the verifier tries to
determine the size of a type of the form "%rt = type { %rt }" while
checking an alloca of the type.
llvm-svn: 196626
lib/Transforms/Instrumentation/AddressSanitizer.cpp:1405:36: error: non-constant-expression cannot be narrowed from type 'uint64_t' (aka 'unsigned long long') to 'size_t' (aka 'unsigned int') in initializer list [-Wc++11-narrowing]
getAllocaSizeInBytes(AI),
^~~~~~~~~~~~~~~~~~~~~~~~
llvm-svn: 196623
This commit caches the value of the AllowAtInIdentifier variable as
a class variable in AsmLexer. We do this to avoid repeated MAI
queries and string comparisons each time we lex an identifier.
llvm-svn: 196622
Summary:
Rewrite asan's stack frame layout.
First, most of the stack layout logic is moved into a separte file
to make it more testable and (potentially) useful for other projects.
Second, make the frames more compact by using adaptive redzones
(smaller for small objects, larger for large objects).
Third, try to minimized gaps due to large alignments (this is hypothetical since
today we don't see many stack vars aligned by more than 32).
The frames indeed become more compact, but I'll still need to run more benchmarks
before committing, but I am sking for review now to get early feedback.
This change will be accompanied by a trivial change in compiler-rt tests
to match the new frame sizes.
Reviewers: samsonov, dvyukov
Reviewed By: samsonov
CC: llvm-commits
Differential Revision: http://llvm-reviews.chandlerc.com/D2324
llvm-svn: 196568
The intended behaviour is to force vectorization on the presence
of the flag (either turn on or off), and to continue the behaviour
as expected in its absence. Tests were added to make sure the all
cases are covered in opt. No tests were added in other tools with
the assumption that they should use the PassManagerBuilder in the
same way.
This patch also removes the outdated -late-vectorize flag, which was
on by default and not helping much.
The pragma metadata is being attached to the same place as other loop
metadata, but nothing forbids one from attaching it to a function
(to enable #pragma optimize) or basic blocks (to hint the basic-block
vectorizers), etc. The logic should be the same all around.
Patches to Clang to produce the metadata will be produced after the
initial implementation is agreed upon and committed. Patches to other
vectorizers (such as SLP and BB) will be added once we're happy with
the pass manager changes.
llvm-svn: 196537
This allows a target to use MI-Sched as an in-order scheduler that
will model strict resource conflicts without defining a processor
itinerary. Instead, the target can now use the new per-operand machine
model and define in-order resources with BufferSize=0. For example,
this would allow restricting the type of operations that can be formed
into a dispatch group. (Normally NumMicroOps is sufficient to enforce
dispatch groups).
If the intent is to model latency in in-order pipeline, as opposed to
resource conflicts, then a resource with BufferSize=1 should be
defined instead.
This feature is only casually tested as there are no in-tree targets
using it yet. However, Hal will be experimenting with POWER7.
llvm-svn: 196517
getSymbolWithGlobalValueBase use is to create a name of a new symbol based
on the name of an existing GV. Assert that and then remove the last call
to pass true to isImplicitlyPrivate.
This gives the mangler API a 1:1 mapping from GV to names, which is what we
need to drop the mangler dependency on the target (and use an extended
datalayout instead).
llvm-svn: 196472
Most people are using MSVC 2012, which lacks the <initializer_list>
header. MSVC 2013 shipped with that header, but it has not yet been
tested. If clang works with the 2013 header, then we can enable this by
checking the value of _MSC_VER.
llvm-svn: 196448
ELF_Other_Weakref and ELF_Other_ThumbFunc seems to be LLVM
internal ELF symbol flags. These should not be emitted to
object file.
This commit defines ELF_STO_Shift for the target-defined
flags for st_other, and increase the value of
ELF_Other_Shift to 16.
llvm-svn: 196440
We were previously not adding fast-math flags through CreateBinOp()
when it happened to be making a floating point binary operator. This
patch updates it to do so similarly to directly calling CreateF*().
llvm-svn: 196438
ARM symbol variants are written with parens instead of @ like this:
.word __GLOBAL_I_a(target1)
This commit adds support for parsing these symbol variants in
expressions. We introduce a new flag to MCAsmInfo that indicates the
parser should use parens to parse the symbol variant. The expression
parser is modified to look for symbol variants using parens instead
of @ when the corresponding MCAsmInfo flag is true.
The MCAsmInfo parens flag is enabled only for ARM on ELF.
By adding this flag to MCAsmInfo, we are able to get rid of
redundant ARM-specific symbol variants and use the generic variants
instead (e.g. VK_GOT instead of VK_ARM_GOT). We use the new
UseParensForSymbolVariant attribute in MCAsmInfo to correctly print
the symbol variants for arm.
To achive this we need to keep a handle to the MCAsmInfo in the
MCSymbolRefExpr class that we can check when printing the symbol
variant.
Updated Tests:
Changed case of symbol variant to match the generic kind.
test/CodeGen/ARM/tls-models.ll
test/CodeGen/ARM/tls1.ll
test/CodeGen/ARM/tls2.ll
test/CodeGen/Thumb2/tls1.ll
test/CodeGen/Thumb2/tls2.ll
PR18080
llvm-svn: 196424
This currently breaks clang/test/CodeGen/code-coverage.c. The root cause
is that the newly introduced access to Funcs[j] is out of bounds.
llvm-svn: 196365
This splits the file-scope read() function into readGCNO() and
readGCDA(). Also broke file format read into functions that first read
the file type, then check the version.
llvm-svn: 196353
Instead of asking the user to specify a single file to output coverage
info and defaulting to STDOUT, llvm-cov now creates files for each
source file with a naming system of: <source filename> + ".llcov".
This is what gcov does and although it can clutter the working directory
with numerous coverage files, it will be easier to hook the llvm-cov
output to tools which operate on this assumption (such as lcov).
llvm-svn: 196184
This is useful for debugging issues in the BlockFrequency implementation
since one can easily visualize where probability mass and other errors
occur in the propagation.
This is the MI version of r194654.
llvm-svn: 196183
Each line stores all the blocks that execute on that line, instead of
only storing the line counts previously accumulated. This provides more
information for each line, and will be useful for options in enabling
block and branch information.
llvm-svn: 196177
Added GCOVEdge which are simple structs owned by the GCOVFunction that
stores the source and destination GCOVBlocks, as well as the counts.
Changed GCOVBlocks so that it stores a vector of source GCOVEdges and a
vector of destination GCOVEdges, rather than just the block number.
Storing the block number was only useful for knowing the number of edges
and for debug info. Using a struct is useful for traversing the edges,
especially back edges which may be needed later.
llvm-svn: 196175
Add a helper function getDebugInfoVersionFromModule to return the debug info
version number for a module.
"Verifier/module-flags-1.ll" checks for verification errors.
It will seg fault when calling getDebugInfoVersionFromModule because of the
incorrect format for module flags in the testing case. We make
getModuleFlagsMetadata more robust by checking for error conditions.
PR17982
llvm-svn: 196158
When a block is unreachable, asking its dom tree descendants should
return the empty set. However, the computation of the descendants
was causing a segmentation fault because the dom tree node we get
from the basic block is initially NULL.
Fixed by adding a test for a valid dom tree node before we iterate.
The patch also adds some unit tests to the existing dom tree tests.
llvm-svn: 196099
to be a bit more sensible. The public interface now is first followed by
the implementation details.
This also resolves a FIXME to make something private -- it was already
possible as the one special caller was already a friend.
No functionality changed.
llvm-svn: 196095
target independent.
Most of the x86 specific stackmap/patchpoint handling was necessitated by the
use of the native address-mode format for frame index operands. PEI has now
been modified to treat stackmap/patchpoint similarly to DEBUG_INFO, allowing
us to use a simple, platform independent register/offset pair for frame
indexes on stackmap/patchpoints.
Notes:
- Folding is now platform independent and automatically supported.
- Emiting patchpoints with direct memory references now just involves calling
the TargetLoweringBase::emitPatchPoint utility method from the target's
XXXTargetLowering::EmitInstrWithCustomInserter method. (See
X86TargetLowering for an example).
- No more ugly platform-specific operand parsers.
This patch shouldn't change the generated output for X86.
llvm-svn: 195944
only user was an ancient SCC printing bit of the opt tool which really
should be walking the call graph the same way the CGSCC pass manager
does.
llvm-svn: 195800
class name. I think we're no longer using any compilers with
sufficiently broken ICN for this use case, but I'll watch the bots and
introduce a typedef without a reserved name if any yell at me.
llvm-svn: 195793
doxygen comments, make existing comments doxygen comments etc.
Also, switch commented-out debug helpers to #if-0-ed out debug helpers.
No functionality changed.
llvm-svn: 195783
This patch adds the counter-part to DominatorTree::getDescendants.
It also fixes a couple of comments I noticed out of date in the
DominatorTree class.
llvm-svn: 195778
happy with but GCC complains about. I'm assuming both compilers are
correct and these are optional in C++11 because I'm too tired to read
the standard. ;]
llvm-svn: 195748
of the two analysis managers into a CRTP base class that can be shared
and re-used in building any analysis manager. This will in turn simplify
adding yet another analysis manager to the system.
The base class provides all of the interface sugar for the analysis
manager delegating the functionality back through DerivedT methods which
operate on simple pass IDs. It also provides the pass registration,
storage, and lookup system which is common across the various
formulations of analysis managers.
llvm-svn: 195747
CallGraph.
This makes the CallGraph a totally generic analysis object that is the
container for the graph data structure and the primary interface for
querying and manipulating it. The pass logic is separated into its own
class. For compatibility reasons, the pass provides wrapper methods for
most of the methods on CallGraph -- they all just forward.
This will allow the new pass manager infrastructure to provide its own
analysis pass that constructs the same CallGraph object and makes it
available. The idea is that in the new pass manager, the analysis pass's
'run' method returns a concrete analysis 'result'. Here, that result is
a 'CallGraph'. The 'run' method will typically do only minimal work,
deferring much of the work into the implementation of the result object
in order to be lazy about computing things, but when (like DomTree)
there is *some* up-front computation, the analysis does it prior to
handing the result back to the querying pass.
I know some of this is fairly ugly. I'm happy to change it around if
folks can suggest a cleaner interim state, but there is going to be some
amount of unavoidable ugliness during the transition period. The good
thing is that this is very limited and will naturally go away when the
old pass infrastructure goes away. It won't hang around to bother us
later.
Next up is the initial new-PM-style call graph analysis. =]
llvm-svn: 195722
that lets the analysis and graph types be separate and the graph
computed from the analysis through some arbitrary user-supplied code.
This will allow a call graph to an independent entity from the pass
which creates it which is necessary for the new pass manager.
llvm-svn: 195717
changes to it. No functionality changed.
You may wonder why on earth touching this code is involved in the pass
manager work as indicated by my lovely '[PM]' tag? Let me tell you
a story.
<redacted>
Yea, it's too long of a story. Let us say that there are yaks, many of
them. I am busy shaving them as fast as I can.
llvm-svn: 195715
A Direct stack map location records the address of frame index. This
address is itself the value that the runtime requested. This differs
from IndirectMemRefOp locations, which refer to a stack locations from
which the requested values must be loaded. Direct locations can
directly communicate the address if an alloca, while IndirectMemRefOp
handle register spills.
For example:
entry:
%a = alloca i64...
llvm.experimental.stackmap(i32 <ID>, i32 <shadowBytes>, i64* %a)
Since both the alloca and stackmap intrinsic are in the entry block,
and the intrinsic takes the address of the alloca, the runtime can
assume that LLVM will not substitute alloca with any intervening
value. This must be verified by the runtime by checking that the stack
map's location is a Direct location type. The runtime can then
determine the alloca's relative location on the stack immediately after
compilation, or at any time thereafter. This differs from Register and
Indirect locations, because the runtime can only read the values in
those locations when execution reaches the instruction address of the
stack map.
llvm-svn: 195712
spacing around the '*' in pointer types. Will let me use clang-format on
subsequent changes without introducing any noise. No functionality
changed.
llvm-svn: 195708
protection to the same layer.
This is in line with Howard's advice on how best to handle self-move
assignment as he explained on SO[1]. It also ensures that implementing
swap with move assignment continues to work in the case of self-swap.
[1]: http://stackoverflow.com/questions/9322174/move-assignment-operator-and-if-this-rhs
llvm-svn: 195705
proxy. This lets a function pass query a module analysis manager.
However, the interface is const to indicate that only cached results can
be safely queried.
With this, I think the new pass manager is largely functionally complete
for modules and analyses. Still lots to test, and need to generalize to
SCCs and Loops, and need to build an adaptor layer to support the use of
existing Pass objects in the new managers.
llvm-svn: 195538
results.
This is the last piece of infrastructure needed to effectively support
querying *up* the analysis layers. The next step will be to introduce
a proxy which provides access to those layers with appropriate use of
const to direct queries to the safe interface.
llvm-svn: 195525
one function's analyses are invalidated at a time. Also switch the
preservation of the proxy to *fully* preserve the lower (function)
analyses.
Combined, this gets both upward and downward analysis invalidation to
a point I'm happy with:
- A function pass invalidates its function analyses, and its parent's
module analyses.
- A module pass invalidates all of its functions' analyses including the
set of which functions are in the module.
- A function pass can preserve a module analysis pass.
- If all function passes preserve a module analysis pass, that
preservation persists. If any doesn't the module analysis is
invalidated.
- A module pass can opt into managing *all* function analysis
invalidation itself or *none*.
- The conservative default is none, and the proxy takes the maximally
conservative approach that works even if the set of functions has
changed.
- If a module pass opts into managing function analysis invalidation it
has to propagate the invalidation itself, the proxy just does nothing.
The only thing really missing is a way to query for a cached analysis or
nothing at all. With this, function passes can more safely request
a cached module analysis pass without fear of it accidentally running
part way through.
llvm-svn: 195519
We can share the implementation between StripSymbols and dropping debug info
for metadata versions that do not match.
Also update the comments to match the implementation. A follow-on patch will
drop the "Debug Info Version" module flag in StripDebugInfo.
llvm-svn: 195505
Improvements over r195317:
- Set/restore EnableFastISel flag instead of just running FastISel within
SelectAllBasicBlocks; the flag is checked in various places, and
FastISel won't run properly if those places don't do the right thing.
- Test looks for normal ISel versus FastISel behavior, and not
something more subtle that doesn't work everywhere.
Based on work by Andrea Di Biagio.
llvm-svn: 195491
run methods of the analysis passes.
Also generalizes and re-uses the SFINAE for transformation passes so
that users can write an analysis pass and only accept an analysis
manager if that is useful to their pass.
This completes the plumbing to make an analysis manager available
through every pass's run method if desired so that passes no longer need
to be constructed around them.
llvm-svn: 195451
several templates. The previous order didn't make any sense as it
separated 'IRUnitT' and 'AnalysisManagerT', the types which are
essentially paired and passed along together throughout the layers.
llvm-svn: 195450
Since the analysis managers were split into explicit function and module
analysis managers, it is now completely trivial to specify this when
building up the concept and model types explicitly, and it is impossible
to end up with a type error at run time. We instantiate a template when
registering a pass that will enforce the requirement at a type-system
level, and we produce a dynamic error on all the other query paths to
the analysis manager if the pass in question isn't registered.
llvm-svn: 195447
This is supposed to be the whole type of the IR unit, and so we
shouldn't pass a pointer to it but rather the value itself. In turn, we
need to provide a 'Module *' as that type argument (for example). This
will become more relevant with SCCs or other units which may not be
passed as a pointer type, but also brings consistency with the
transformation pass templates.
llvm-svn: 195445
We already have a method for returning one loop latch but for some
reason no one has committed one for returning loop latches in the case
where there are multiple latches.
llvm-svn: 195410
rather than the constructors of passes.
This simplifies the APIs of passes significantly and removes an error
prone pattern where the *same* manager had to be given to every
different layer. With the new API the analysis managers themselves will
have to be cross connected with proxy analyses that allow a pass at one
layer to query for the analysis manager of another layer. The proxy will
both expose a handle to the other layer's manager and it will provide
the invalidation hooks to ensure things remain consistent across layers.
Finally, the outer-most analysis manager has to be passed to the run
method of the outer-most pass manager. The rest of the propagation is
automatic.
I've used SFINAE again to allow passes to completely disregard the
analysis manager if they don't need or want to care. This helps keep
simple things simple for users of the new pass manager.
Also, the system specifically supports passing a null pointer into the
outer-most run method if your pass pipeline neither needs nor wants to
deal with analyses. I find this of dubious utility as while some
*passes* don't care about analysis, I'm not sure there are any
real-world users of the pass manager itself that need to avoid even
creating an analysis manager. But it is easy to support, so there we go.
Finally I renamed the module proxy for the function analysis manager to
the more verbose but less confusing name of
FunctionAnalysisManagerModuleProxy. I hate this name, but I have no idea
what else to name these things. I'm expecting in the fullness of time to
potentially have the complete cross product of types at the proxy layer:
{Module,SCC,Function,Loop,Region}AnalysisManager{Module,SCC,Function,Loop,Region}Proxy
(except for XAnalysisManagerXProxy which doesn't make any sense)
This should make it somewhat easier to do the next phases which is to
build the upward proxy and get its invalidation correct, as well as to
make the invalidation within the Module -> Function mapping pass be more
fine grained so as to invalidate fewer fuction analyses.
After all of the proxy analyses are done and the invalidation working,
I'll finally be able to start working on the next two fun fronts: how to
adapt an existing pass to work in both the legacy pass world and the new
one, and building the SCC, Loop, and Region counterparts. Fun times!
llvm-svn: 195400
This patch is a rewrite of the original patch commited in r194542. Instead of
relying on the type legalizer to do the splitting for us, we now peform the
splitting ourselves in the DAG combiner. This is necessary for the case where
the vector mask is a legal type after promotion and still wouldn't require
splitting.
Patch by: Juergen Ributzka
NOTE: This is a candidate for the 3.4 branch.
llvm-svn: 195397
It broke, at least, i686 target. It is reproducible with "llc -mtriple=i686-unknown".
FYI, it didn't appear to add either "-O0" or "-fast-isel".
llvm-svn: 195339
it is completely optional, and sink the logic for handling the preserved
analysis set into it.
This allows us to implement the delegation logic desired in the proxy
module analysis for the function analysis manager where if the proxy
itself is preserved we assume the set of functions hasn't changed and we
do a fine grained invalidation by walking the functions in the module
and running the invalidate for them all at the manager level and letting
it try to invalidate any passes.
This in turn makes it blindingly obvious why we should hoist the
invalidate trait and have two collections of results. That allows
handling invalidation for almost all analyses without indirect calls and
it allows short circuiting when the preserved set is all.
llvm-svn: 195338
type and detect whether or not it provides an 'invalidate' member the
analysis manager should use.
This lets the overwhelming common case of *not* caring about custom
behavior when an analysis is invalidated be the the obvious default
behavior with no code written by the author of an analysis. Only when
they write code specifically to handle invalidation does it get used.
Both cases are actually covered by tests here. The test analysis uses
the default behavior, and the proxy module analysis actually has custom
behavior on invalidation that is firing correctly. (In fact, this is the
analysis which was the primary motivation for having custom invalidation
behavior in the first place.)
llvm-svn: 195332
This proxy will fill the role of proxying invalidation events down IR
unit layers so that when a module changes we correctly invalidate
function analyses. Currently this is a very coarse solution -- any
change blows away the entire thing -- but the next step is to make
invalidation handling more nuanced so that we can propagate specific
amounts of invalidation from one layer to the next.
The test is extended to place a module pass between two function pass
managers each of which have preserved function analyses which get
correctly invalidated by the module pass that might have changed what
functions are even in the module.
llvm-svn: 195304
MappingTrait template specializations can now have a validate() method which
performs semantic checking. For details, see <http://llvm.org/docs/YamlIO.html>.
llvm-svn: 195286
Enhance the tests to actually require moves in C++11 mode, in addition
to testing the moved-from state. Further enhance the tests to cover
copy-assignment into a moved-from object and moving a large-state
object. (Note that we can't really test small-state vs. large-state as
that isn't an observable property of the API really.) This should finish
addressing review on r195239.
llvm-svn: 195261
This adds a new set-like type which represents a set of preserved
analysis passes. The set is managed via the opaque PassT::ID() void*s.
The expected convenience templates for interacting with specific passes
are provided. It also supports a symbolic "all" state which is
represented by an invalid pointer in the set. This state is nicely
saturating as it comes up often. Finally, it supports intersection which
is used when finding the set of preserved passes after N different
transforms.
The pass API is then changed to return the preserved set rather than
a bool. This is much more self-documenting than the previous system.
Returning "none" is a conservatively correct solution just like
returning "true" from todays passes and not marking any passes as
preserved. Passes can also be dynamically preserved or not throughout
the run of the pass, and whatever gets returned is the binding state.
Finally, preserving "all" the passes is allowed for no-op transforms
that simply can't harm such things.
Finally, the analysis managers are changed to instead of blindly
invalidating all of the analyses, invalidate those which were not
preserved. This should rig up all of the basic preservation
functionality. This also correctly combines the preservation moving up
from one IR-layer to the another and the preservation aggregation across
N pass runs. Still to go is incrementally correct invalidation and
preservation across IR layers incrementally during N pass runs. That
will wait until we have a device for even exposing analyses across IR
layers.
While the core of this change is obvious, I'm not happy with the current
testing, so will improve it to cover at least some of the invalidation
that I can test easily in a subsequent commit.
llvm-svn: 195241
Somehow, this ADT got missed which is moderately terrifying considering
the efficiency of move for it.
The code to implement move semantics for it is pretty horrible
currently but was written to reasonably closely match the rest of the
code. Unittests that cover both copying and moving (at a basic level)
added.
llvm-svn: 195239
The FunctionPassManager is now itself a function pass. When run over
a function, it runs all N of its passes over that function. This is the
1:N mapping in the pass dimension only. This allows it to be used in
either a ModulePassManager or potentially some other manager that
works on IR units which are supersets of Functions.
This commit also adds the obvious adaptor to map from a module pass to
a function pass, running the function pass across every function in the
module.
The test has been updated to use this new pattern.
llvm-svn: 195192
Instead of permanently outputting "MVLL" as the file checksum, clang
will create gcno and gcda checksums by hashing the destination block
numbers of every arc. This allows for llvm-cov to check if the two gcov
files are synchronized.
Regenerated the test files so they contain the checksum. Also added
negative test to ensure error when the checksums don't match.
llvm-svn: 195191
a module-specific interface. This is the first of many steps necessary
to generalize the infrastructure such that we can support both
a Module-to-Function and Module-to-SCC-to-Function pass manager
nestings.
After a *lot* of attempts that never worked and didn't even make it to
a committable state, it became clear that I had gotten the layering
design of analyses flat out wrong. Four days later, I think I have most
of the plan for how to correct this, and I'm starting to reshape the
code into it. This is just a baby step I'm afraid, but starts separating
the fundamentally distinct concepts of function analysis passes and
module analysis passes so that in subsequent steps we can effectively
layer them, and have a consistent design for the eventual SCC layer.
As part of this, I've started some interface changes to make passes more
regular. The module pass accepts the module in the run method, and some
of the constructor parameters are gone. I'm still working out exactly
where constructor parameters vs. method parameters will be used, so
I expect this to fluctuate a bit.
This actually makes the invalidation less "correct" at this phase,
because now function passes don't invalidate module analysis passes, but
that was actually somewhat of a misfeature. It will return in a better
factored form which can scale to other units of IR. The documentation
has gotten less verbose and helpful.
llvm-svn: 195189
This is the first step to fix pr17918.
It extends the .section directive a bit, inspired by what the ELF one looks
like. The problem with using linkonce is that given
.section foo
.linkonce....
.section foo
.linkonce
we would already have switched sections when getting to .linkonce. The cleanest
solution seems to be to add the comdat information in the .section itself.
llvm-svn: 195148
This patch removes most of the trivial cases of weak vtables by pinning them to
a single object file. The memory leaks in this version have been fixed. Thanks
Alexey for pointing them out.
Differential Revision: http://llvm-reviews.chandlerc.com/D2068
Reviewed by Andy
llvm-svn: 195064
This change is incorrect. If you delete virtual destructor of both a base class
and a subclass, then the following code:
Base *foo = new Child();
delete foo;
will not cause the destructor for members of Child class. As a result, I observe
plently of memory leaks. Notable examples I investigated are:
ObjectBuffer and ObjectBufferStream, AttributeImpl and StringSAttributeImpl.
llvm-svn: 194997
We used to depend on running processModule before the other public functions
such as processDeclare, processValue and processLocation. We are now relaxing
the constraint by adding a module argument to the three functions and
letting the three functions to initialize the type map. This will be used in
a follow-on patch that collects nodes reachable from a Function.
llvm-svn: 194973
This adds a boolean member variable to the PassManagerBuilder to control loop
rerolling (just like we have for unrolling and the various vectorization
options). This is necessary for control by the frontend. Loop rerolling remains
disabled by default at all optimization levels.
llvm-svn: 194966
This change is the first in a series of changes improving LLVM's Block
Frequency propogation implementation to not lose probability mass in
branchy code when propogating block frequency information from a basic
block to its successors. This patch is a simple infrastructure
improvement that does not actually modify the block frequency
algorithm. The specific changes are:
1. Changes the division algorithm used when scaling block frequencies by
branch probabilities to a short division algorithm. This gives us the
remainder for free as well as provides a nice speed boost. When I
benched the old routine and the new routine on a Sandy Bridge iMac with
disabled turbo mode performing 8192 iterations on an array of length
32768, I saw ~600% increase in speed in mean/median performance.
2. Exposes a scale method that returns a remainder. This is important so
we can ensure that when we scale a block frequency by some branch
probability BP = N/D, the remainder from the division by D can be
retrieved and propagated to other children to ensure no probability mass
is lost (more to come on this).
llvm-svn: 194950
AnalysisManager. All this method did was assert something and we have
a perfectly good way to trigger that assert from the query path.
llvm-svn: 194947
Implementing this on bigendian platforms could get strange. I added a
target hook, getStackSlotRange, per Jakob's recommendation to make
this as explicit as possible.
llvm-svn: 194942
This adds a loop rerolling pass: the opposite of (partial) loop unrolling. The
transformation aims to take loops like this:
for (int i = 0; i < 3200; i += 5) {
a[i] += alpha * b[i];
a[i + 1] += alpha * b[i + 1];
a[i + 2] += alpha * b[i + 2];
a[i + 3] += alpha * b[i + 3];
a[i + 4] += alpha * b[i + 4];
}
and turn them into this:
for (int i = 0; i < 3200; ++i) {
a[i] += alpha * b[i];
}
and loops like this:
for (int i = 0; i < 500; ++i) {
x[3*i] = foo(0);
x[3*i+1] = foo(0);
x[3*i+2] = foo(0);
}
and turn them into this:
for (int i = 0; i < 1500; ++i) {
x[i] = foo(0);
}
There are two motivations for this transformation:
1. Code-size reduction (especially relevant, obviously, when compiling for
code size).
2. Providing greater choice to the loop vectorizer (and generic unroller) to
choose the unrolling factor (and a better ability to vectorize). The loop
vectorizer can take vector lengths and register pressure into account when
choosing an unrolling factor, for example, and a pre-unrolled loop limits that
choice. This is especially problematic if the manual unrolling was optimized
for a machine different from the current target.
The current implementation is limited to single basic-block loops only. The
rerolling recognition should work regardless of how the loop iterations are
intermixed within the loop body (subject to dependency and side-effect
constraints), but the significant restriction is that the order of the
instructions in each iteration must be identical. This seems sufficient to
capture all current use cases.
This pass is not currently enabled by default at any optimization level.
llvm-svn: 194939
This patch removes most of the trivial cases of weak vtables by pinning them to
a single object file.
Differential Revision: http://llvm-reviews.chandlerc.com/D2068
Reviewed by Andy
llvm-svn: 194865
0xffff does not mean that there are 65535 sections in a COFF file but
indicates that it's a COFF import library. This patch fixes SEGV error
when an import library file is passed to llvm-readobj.
llvm-svn: 194844
Stop folding constant adds into GEP when the type size doesn't match.
Otherwise, the adds' operands are effectively being promoted, changing the
conditions of an overflow. Results are different when:
sext(a) + sext(b) != sext(a + b)
Problem originally found on x86-64, but also fixed issues with ARM and PPC,
which used similar code.
<rdar://problem/15292280>
Patch by Duncan Exon Smith!
llvm-svn: 194840
Summary:
When getConstant() is called for an expanded vector type, it is split into
multiple scalar constants which are then combined using appropriate build_vector
and bitcast operations.
In addition to the usual big/little endian differences, the case where the
element-order of the vector does not have the same endianness as the elements
themselves is also accounted for. For example, for v4i32 on big-endian MIPS,
the byte-order of the vector is <3210,7654,BA98,FEDC>. For little-endian, it is
<0123,4567,89AB,CDEF>.
Handling this case turns out to be a nop since getConstant() returns a splatted
vector (so reversing the element order doesn't change the value)
This fixes a number of cases in MIPS MSA where calling getConstant() during
operation legalization introduces illegal types (e.g. to legalize v2i64 UNDEF
into a v2i64 BUILD_VECTOR of illegal i64 zeros). It should also handle bigger
differences between illegal and legal types such as legalizing v2i64 into v8i16.
lowerMSASplatImm() in the MIPS backend no longer needs to avoid calling
getConstant() so this function has been updated in the same patch.
For the sake of transparency, the steps I've taken since the review are:
* Added 'virtual' to isVectorEltOrderLittleEndian() as requested. This revealed
that the MIPS tests were falsely passing because a polymorphic function was
not actually polymorphic in the reviewed patch.
* Fixed the tests that were now failing. This involved deleting the code to
handle the MIPS MSA element-order (which was previously doing an byte-order
swap instead of an element-order swap). This left
isVectorEltOrderLittleEndian() unused and it was deleted.
* Fixed build failures caused by rebasing beyond r194467-r194472. These build
failures involved the bset, bneg, and bclr instructions added in these commits
using lowerMSASplatImm() in a way that was no longer valid after this patch.
Some of these were fixed by calling SelectionDAG::getConstant() instead,
others were fixed by a new function getBuildVectorSplat() that provided the
removed functionality of lowerMSASplatImm() in a more sensible way.
Reviewers: bkramer
Reviewed By: bkramer
CC: llvm-commits
Differential Revision: http://llvm-reviews.chandlerc.com/D1973
llvm-svn: 194811
This is to avoid this transformation in some cases:
fold (conv (load x)) -> (load (conv*)x)
On architectures that don't natively support some vector
loads efficiently casting the load to a smaller vector of
larger types and loading is more efficient.
Patch by Micah Villmow.
llvm-svn: 194783
Including only Debug.h did not cause a compilation error, but you couldn't
do anything (like writing something with <<) to raw_ostreams returned by
llvm::dbgs() or llvm::errs() without including raw_ostream.h. So including
it from Debug.h should make sense.
Differential Revision: http://llvm-reviews.chandlerc.com/D2183
llvm-svn: 194759
This is useful for debugging issues in the BlockFrequency implementation since
one can easily visualize where probability mass and other errors occur in the
propagation.
llvm-svn: 194654
- readInt() should check all 4 bytes can be read, not just 1.
- In the event of false data in the gcno file, it was possible to index
into a non-existent index of SmallVector, causing assertion error.
llvm-svn: 194639
According to the hazy gcov documentation, it appeared to be technically
possible for lines within a block to belong to different source files.
However, upon further investigation, gcov does not actually support
multiple source files for a single block.
This change removes a level of separation between blocks and lines by
replacing the StringMap of GCOVLines with a SmallVector of ints
representing line numbers. This also means that the GCOVLines class is
no longer needed.
This paves the way for supporting the "-a" option, which will output
block information.
llvm-svn: 194637
Unified the interface for read functions. They all return a boolean
indicating if the read from file succeeded. Functions that previously
returned the read value now store it into a variable that is passed in
by reference instead. Callers will need to check the return value to
detect if an error occurred.
Also added a new test which ensures that no assertions occur when file
contains invalid data. llvm-cov should return with error code 1 upon
failure.
llvm-svn: 194635
instructions. This patch does not include the shift right and accumulate
instructions. A number of non-overloaded intrinsics have been remove in favor
of their overloaded counterparts.
llvm-svn: 194598
Accepting quotes is a property of an assembler, not of an object file. For
example, ELF can support any names for sections and symbols, but the gnu
assembler only accepts quotes in some contexts and llvm-mc in a few more.
LLVM should not produce different symbols based on a guess about which assembler
will be reading the code it is printing.
llvm-svn: 194575
This adds a new scalar pass that reads a file with samples generated
by 'perf' during runtime. The samples read from the profile are
incorporated and emmited as IR metadata reflecting that profile.
The profile file is assumed to have been generated by an external
profile source. The profile information is converted into IR metadata,
which is later used by the analysis routines to estimate block
frequencies, edge weights and other related data.
External profile information files have no fixed format, each profiler
is free to define its own. This includes both the on-disk representation
of the profile and the kind of profile information stored in the file.
A common kind of profile is based on sampling (e.g., perf), which
essentially counts how many times each line of the program has been
executed during the run.
The SampleProfileLoader pass is organized as a scalar transformation.
On startup, it reads the file given in -sample-profile-file to
determine what kind of profile it contains. This file is assumed to
contain profile information for the whole application. The profile
data in the file is read and incorporated into the internal state of
the corresponding profiler.
To facilitate testing, I've organized the profilers to support two file
formats: text and native. The native format is whatever on-disk
representation the profiler wants to support, I think this will mostly
be bitcode files, but it could be anything the profiler wants to
support. To do this, every profiler must implement the
SampleProfile::loadNative() function.
The text format is mostly meant for debugging. Records are separated by
newlines, but each profiler is free to interpret records as it sees fit.
Profilers must implement the SampleProfile::loadText() function.
Finally, the pass will call SampleProfile::emitAnnotations() for each
function in the current translation unit. This function needs to
translate the loaded profile into IR metadata, which the analyzer will
later be able to use.
This patch implements the first steps towards the above design. I've
implemented a sample-based flat profiler. The format of the profile is
fairly simplistic. Each sampled function contains a list of relative
line locations (from the start of the function) together with a count
representing how many samples were collected at that line during
execution. I generate this profile using perf and a separate converter
tool.
Currently, I have only implemented a text format for these profiles. I
am interested in initial feedback to the whole approach before I send
the other parts of the implementation for review.
This patch implements:
- The SampleProfileLoader pass.
- The base ExternalProfile class with the core interface.
- A SampleProfile sub-class using the above interface. The profiler
generates branch weight metadata on every branch instructions that
matches the profiles.
- A text loader class to assist the implementation of
SampleProfile::loadText().
- Basic unit tests for the pass.
Additionally, the patch uses profile information to compute branch
weights based on instruction samples.
This patch converts instruction samples into branch weights. It
does a fairly simplistic conversion:
Given a multi-way branch instruction, it calculates the weight of
each branch based on the maximum sample count gathered from each
target basic block.
Note that this assignment of branch weights is somewhat lossy and can be
misleading. If a basic block has more than one incoming branch, all the
incoming branches will get the same weight. In reality, it may be that
only one of them is the most heavily taken branch.
I will adjust this assignment in subsequent patches.
llvm-svn: 194566
This bug only bit the C++98 build bots because all of the actual uses
really do move. ;] But not *quite* ready to do the whole C++11 switch
yet, so clean it up. Also add a unit test that catches this immediately.
llvm-svn: 194548
more smarts in it. This is where most of the interesting logic that used
to live in the implicit-scheduling-hackery of the old pass manager will
live.
Like the previous commits, note that this is a very early prototype!
I expect substantial changes before this is ready to use.
The core of the design is the following:
- We have an AnalysisManager which can be used across a series of
passes over a module.
- The code setting up a pass pipeline registers the analyses available
with the manager.
- Individual transform passes can check than an analysis manager
provides the analyses they require in order to fail-fast.
- There is *no* implicit registration or scheduling.
- Analysis passes are different from other passes: they produce an
analysis result that is cached and made available via the analysis
manager.
- Cached results are invalidated automatically by the pass managers.
- When a transform pass requests an analysis result, either the analysis
is run to produce the result or a cached result is provided.
There are a few aspects of this design that I *know* will change in
subsequent commits:
- Currently there is no "preservation" system, that needs to be added.
- All of the analysis management should move up to the analysis library.
- The analysis management needs to support at least SCC passes. Maybe
loop passes. Living in the analysis library will facilitate this.
- Need support for analyses which are *both* module and function passes.
- Need support for pro-actively running module analyses to have cached
results within a function pass manager.
- Need a clear design for "immutable" passes.
- Need support for requesting cached results when available and not
re-running the pass even if that would be necessary.
- Need more thorough testing of all of this infrastructure.
There are other aspects that I view as open questions I'm hoping to
resolve as I iterate a bit on the infrastructure, and especially as
I start writing actual passes against this.
- Should we have separate management layers for function, module, and
SCC analyses? I think "yes", but I'm not yet ready to switch the code.
Adding SCC support will likely resolve this definitively.
- How should the 'require' functionality work? Should *that* be the only
way to request results to ensure that passes always require things?
- How should preservation work?
- Probably some other things I'm forgetting. =]
Look forward to more patches in shorter order now that this is in place.
llvm-svn: 194538
Add user-supplied C runtime and compiler-rt library functions to
llvm.compiler.used to protect them from premature optimization by
passes like -globalopt and -ipsccp. Calls to (seemingly unused)
runtime library functions can be added by -instcombine and instruction
lowering.
Patch by Duncan Exon Smith, thanks!
Fixes <rdar://problem/14740087>
llvm-svn: 194514
This reverts commit r194485.
The variable is unused in some macro instantiations, but not others. We should
probably fix clang to not warn on this.
llvm-svn: 194486
Daniel Sanders