Unfortunately, ProgramInfo::ProcessId is signed on Unix and unsigned on
Windows, breaking the standard fix of using '0U' in the gtest
expectation.
llvm-svn: 259704
With this patch, the profile summary data will be available in indexed
profile data file so that profiler reader/compiler optimizer can start
to make use of.
Differential Revision: http://reviews.llvm.org/D16258
llvm-svn: 259626
differentiate between indirect references to functions an direct calls.
This doesn't do a whole lot yet other than change the print out produced
by the analysis, but it lays the groundwork for a very major change I'm
working on next: teaching the call graph to actually be a call graph,
modeling *both* the indirect reference graph and the call graph
simultaneously. More details on that in the next patch though.
The rest of this is essentially a bunch of over-engineering that won't
be interesting until the next patch. But this also isolates essentially
all of the churn necessary to introduce the edge abstraction from the
very important behavior change necessary in order to separately model
the two graphs. So it should make review of the subsequent patch a bit
easier at the cost of making this patch seem poorly motivated. ;]
Differential Revision: http://reviews.llvm.org/D16038
llvm-svn: 259463
With poorly chosen custom parameters, the line table encoding logic would
sometimes end up generating a special opcode bigger than 255, which is wrong.
The set of default parameters that LLVM uses isn't subject to this bug.
When carefully chosing the line table parameters, it's impossible to fall into the
corner case that this patch fixes. The standard however doesn't require that these
parameters be carefully chosen. And even if it did, we shouldn't generate broken
encoding.
Add a unittest for this specific encoding bug, and while at it, create some unit
tests for the encoding logic using different sets of parameters.
llvm-svn: 259334
Add an option to llvm-profdata merge for writing out sparse indexed
profiles. These profiles omit InstrProfRecords for functions which are
never executed.
Differential Revision: http://reviews.llvm.org/D16727
llvm-svn: 259258
This reverts commit r259117.
The LineInfo constructor is defined in the codeview library and we have
to link against it now. Doing that isn't trivial, so reverting for now.
llvm-svn: 259126
Adds a new family of .cv_* directives to LLVM's variant of GAS syntax:
- .cv_file: Similar to DWARF .file directives
- .cv_loc: Similar to the DWARF .loc directive, but starts with a
function id. CodeView line tables are emitted by function instead of
by compilation unit, so we needed an extra field to communicate this.
Rather than overloading the .loc direction further, we decided it was
better to have our own directive.
- .cv_stringtable: Emits the codeview string table at the current
position. Currently this just contains the filenames as
null-terminated strings.
- .cv_filechecksums: Emits the file checksum table for all files used
with .cv_file so far. There is currently no support for emitting
actual checksums, just filenames.
This moves the line table emission code down into the assembler. This
is in preparation for implementing the inlined call site line table
format. The inline line table format encoding algorithm requires knowing
the absolute code offsets, so it must run after the assembler has laid
out the code.
David Majnemer collaborated on this patch.
llvm-svn: 259117
at least as big as the mach header to be identified as a Mach-O file and
make sure smaller files are not identified as a Mach-O files but as
unknown files. Also fix identify_magic() so it looks at all 4 bytes of
the filetype field when determining the type of the Mach-O file.
Then fix the macho-invalid-header test case to check that it is an
unknown file and make sure it does not get the error for
object_error::parse_failed. And also update the unit tests.
llvm-svn: 258883
Summary:
This patch is provided in preparation for removing autoconf on 1/26. The proposal to remove autoconf on 1/26 was discussed on the llvm-dev thread here: http://lists.llvm.org/pipermail/llvm-dev/2016-January/093875.html
"I felt a great disturbance in the [build system], as if millions of [makefiles] suddenly cried out in terror and were suddenly silenced. I fear something [amazing] has happened."
- Obi Wan Kenobi
Reviewers: chandlerc, grosbach, bob.wilson, tstellarAMD, echristo, whitequark
Subscribers: chfast, simoncook, emaste, jholewinski, tberghammer, jfb, danalbert, srhines, arsenm, dschuff, jyknight, dsanders, joker.eph, llvm-commits
Differential Revision: http://reviews.llvm.org/D16471
llvm-svn: 258861
Summary:
Update ObjectTransformLayer::addObjectSet to take the object set by
value rather than reference and pass it to the base layer with move
semantics rather than copy, to match r258185's changes to
ObjectLinkingLayer.
Update the unit test to verify that ObjectTransformLayer's signature stays
in sync with ObjectLinkingLayer's.
Reviewers: lhames
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D16414
llvm-svn: 258630
Using an array instead of ArrayRef would allow type inference, but
(short of using C99) one would still need to write
typedef uint16_t VT[];
LE.write(VT{0x1234, 0x5678});
llvm-svn: 258535
they're needed.
Prior to this patch objects were loaded (via RuntimeDyld::loadObject) when they
were added to the ObjectLinkingLayer, but were not relocated and finalized until
a symbol address was requested. In the interim, another object could be loaded
and finalized with the same memory manager, causing relocation/finalization of
the first object to fail (as the first finalization call may have marked the
allocated memory for the first object read-only).
By deferring the loadObject call (and subsequent memory allocations) until an
object file is needed we can avoid prematurely finalizing memory.
llvm-svn: 258185
Previously these were Darwin-only. Since the switch to direct binary emission
of stubs, trampolines and resolver blocks, these should work on other *nix
platforms too.
These tests can be enabled on Windows once known issues with ORC's handling of
Windows symbol mangling (see e.g. https://llvm.org/PR25940) have been fixed.
llvm-svn: 258031
Summary:
Simplify the memory management of mock IR in test AlterInvokeBundles.
Reviewers: dblaikie
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D16211
llvm-svn: 257892
Summary:
Before this the Verifier didn't complain if the GlobalVariable
referenced from a DIGlobalVariable was not in fact in the correct
module (it would crash while writing bitcode though). Fix this by
always checking parantage of GlobalValues while walking constant
expressions and changing the DIGlobalVariable visitor to also
visit the constant it contains.
Reviewers: rafael
Differential Revision: http://reviews.llvm.org/D16059
llvm-svn: 257825
Summary:
We already have the inverse verification that we only use globals
that are defined in this module. This essentially catches the
same mistake, but when verifying the module that contains the
definition.
Reviewers: rafael
Differential Revision: http://reviews.llvm.org/D15272
llvm-svn: 257823
Summary:
The overloads of CallInst::Create and InvokeInst::Create that are used to
adjust operand bundles purport to create a new instruction "identical in
every way except [for] the operand bundles", so copy the DebugLoc along
with everything else.
Reviewers: sanjoy, majnemer
Subscribers: majnemer, dblaikie, llvm-commits
Differential Revision: http://reviews.llvm.org/D16157
llvm-svn: 257745
Summary:
The problem here is that an enum class can not be implicitly converted to an
integer. That assumption snuck back into PointerIntPair. This commit fixes the
issue and more importantly adds some unittests to make sure that we do not break
this again.
rdar://23594806
Reviewers: gribozavr
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D16131
llvm-svn: 257574
Summary: Add SaturatingMultiplyAdd convenience function template since A + (X * Y) comes up frequently when doing weighted arithmetic.
Reviewers: davidxl, silvas
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D15385
llvm-svn: 257532
This patch adds utilities to ORC for managing a remote JIT target. It consists
of:
1. A very primitive RPC system for making calls over a byte-stream. See
RPCChannel.h, RPCUtils.h.
2. An RPC API defined in the above system for managing memory, looking up
symbols, creating stubs, etc. on a remote target. See OrcRemoteTargetRPCAPI.h.
3. An interface for creating high-level JIT components (memory managers,
callback managers, stub managers, etc.) that operate over the RPC API. See
OrcRemoteTargetClient.h.
4. A helper class for building servers that can handle the RPC calls. See
OrcRemoteTargetServer.h.
The system is designed to work neatly with the existing ORC components and
functionality. In particular, the ORC callback API (and consequently the
CompileOnDemandLayer) is supported, enabling lazy compilation of remote code.
Assuming this doesn't trigger any builder failures, a follow-up patch will be
committed which tests these utilities by using them to replace LLI's existing
remote-JITing demo code.
llvm-svn: 257305
RuntimeDyld::MemoryManager.
The RuntimeDyld::MemoryManager::reserveAllocationSpace method is called when
object files are loaded, and gives clients a chance to pre-allocate memory for
all segments. Previously only the size of each segment (code, ro-data, rw-data)
was supplied but not the alignment. This hasn't caused any problems so far, as
most clients allocate via the MemoryBlock interface which returns page-aligned
blocks. Adding alignment arguments enables finer grained allocation while still
satisfying alignment restrictions.
llvm-svn: 257294
Reid Kleckner