This patch allows static linking of TLS code. To do that it fixes
GOT entries initialization.
If TLS-related GOT entry created for a preemptible symbol i.e. has
a corresponding dynamic relocation, leave the entry initialized by zero.
Write down adjusted TLS symbol's values otherwise. For the adjustments
calculation use offsets for thread-local storage.
https://www.linux-mips.org/wiki/NPTL
llvm-svn: 280914
The primary use of build-id is in debugging, hence omitting debug
sections when computing it significantly reduces its usability as
changes in debug section content wouldn't alter the build-id.
Differential Revision: https://reviews.llvm.org/D24120
llvm-svn: 280421
This patch groups relative relocations in a single block
in combrelocs mode and adds DT_RELCOUNT or DT_RELACOUNT
tag to .dynamic section
Differential revision: https://reviews.llvm.org/D23661
llvm-svn: 280210
Previously DT_PREINIT_ARRAYSZ, DT_INIT_ARRAYSZ and DT_FINI_ARRAYSZ
were set to zero when lincerscript was used becase sections sizes are
calculated later that were taken.
Patch delays values calculation for these entries. Testcase is provided.
Differential revision: https://reviews.llvm.org/D23663
llvm-svn: 279258
This section supersedes .reginfo and .MIPS.options sections. But for now
we have to support all three sections for ABI transition period.
llvm-svn: 278482
One reason why we are (ab)using OutputSectionFactory class is
because it owns output sections. Technically there's no need
to have it own sections. So, this patch transfers the ownership
to Out<ELFT>.
llvm-svn: 278452
Even if an output is not a dynamic object, the output may have
.{preinit,init,fini} sections. Therefore, managing these sections
as Out<ELFT>::Dynamic's members is not correct.
llvm-svn: 278093
Not all relocations from a .eh_frame that point to an executable
section should be ignored. In particular, the relocation finding the
personality function should not.
This is a reduction from trying to bootstrap a static lld on linux.
llvm-svn: 276329
This patch simplifies output section management by making
Factory class have ownership of sections that creates.
Differential Revision: https://reviews.llvm.org/D22575
llvm-svn: 276141
The identifier `Version` was used too often in the code to handle
symbol versions. The struct that contains version definitions is
named `Version`. Local variables for version ID are named `Version`.
Local varaible for version string are named `Version`.
This patch give them different names.
llvm-svn: 275673
Previously, Verdefs and Verdauxs are separated in the section.
The new layout is easier to write as we do not have to maintain
two pointers and can avoid passing a reference to a pointer.
llvm-svn: 275665
ELF spec says that alignment of 0 is equivalent to 1.
Previously, we arbitrary set to 0 or 1, but always setting to 1
makes our program simpler.
llvm-svn: 275374
Since linkerscript should create sections by itself
(if SECTIONS command is present),
then we might want to reuse the OutputSectionFactory (D19976 already do that now),
so this patch moves it out from writer cpp file for that purpose.
Differential revision: http://reviews.llvm.org/D19977
llvm-svn: 275161
The patch adds one more partition to the MIPS GOT. This time it is for
TLS related GOT entries. Such entries are located after 'local' and 'global'
ones. We cannot get a final offset for these entries at the time of
creation because we do not know size of 'local' and 'global' partitions.
So we have to adjust the offset later using `getMipsTlsOffset()` method.
All MIPS TLS relocations which need GOT entries operates MIPS style GOT
offset - 'offset from the GOT's beginning' - MipsGPOffset constant. That
is why I add new types of relocation expressions.
One more difference from othe ABIs is that the MIPS ABI does not support
any TLS relocation relaxations. I decided to make a separate function
`handleMipsTlsRelocation` and put MIPS TLS relocation handling code
there. It is similar to `handleTlsRelocation` routine and duplicates its
code. But it allows to make the code cleaner and prevent pollution of
the `handleTlsRelocation` by MIPS 'if' statements.
Differential Revision: http://reviews.llvm.org/D21606
llvm-svn: 273569
Peter Smith found while trying to support thunk creation for ARM that
LLD sometimes creates broken thunks for MIPS. The cause of the bug is
that we assign file offsets to input sections too early. We need to
create all sections and then assign section offsets because appending
thunks changes file offsets for all following sections.
This patch separates the pass to assign file offsets from thunk
creation pass. This effectively reverts r265673.
Differential Revision: http://reviews.llvm.org/D21598
llvm-svn: 273532
With fix:
-soname flag was not set in testcase. Hash calculated for base def was different on local
and bot machines because filename fos used for calculating.
Initial commit message:
Patch implements basic support of versioned symbols.
There is no wildcards patterns matching except local: *;
There is no support for hierarchies.
There is no support for symbols overrides (@ vs @@ not handled).
This patch allows programs that using simple scripts to link and run.
Differential revision: http://reviews.llvm.org/D21018
llvm-svn: 273152
Patch implements basic support of versioned symbols.
There is no wildcards patterns matching except local: *;
There is no support for hierarchies.
There is no support for symbols overrides (@ vs @@ not handled).
This patch allows programs that using simple scripts to link and run.
Differential revision: http://reviews.llvm.org/D21018
llvm-svn: 273143
There are two motivations for this patch. The first one is a preparation
for support MIPS TLS relocations. It might sound like a joke but for GOT
entries related to TLS relocations MIPS ABI uses almost regular approach
with creation of dynamic relocations for each GOT enty etc. But we need
to separate these 'regular' TLS related entries from MIPS specific local
and global parts of GOT. ABI declare simple solution - all TLS related
entries allocated at the end of GOT after local/global parts. The second
motivation it to support GOT relocations for non-preemptible symbols
with addends. If we have more than one GOT relocations against symbol S
with different addends we need to create GOT entries for each unique
Symbol/Addend pairs.
So we store all MIPS GOT entries in separate containers. For non-preemptible
symbols we have to maintain two data structures. The first one is MipsLocal
vector. Each entry corresponds to the GOT entry from the 'local' part
of the GOT contains the symbol's address plus addend. The second one
is MipsLocalMap. It is a map from Symbol/Addend pair to the GOT index.
Differential Revision: http://reviews.llvm.org/D21297
llvm-svn: 273127
I think it is me who named these variables, but I always find that
they are slightly confusing because align is a verb.
Adding four letters is worth it.
llvm-svn: 272984
MergedInputSection::getOffset is the busiest function in LLD if string
merging is enabled and input files have lots of mergeable sections.
It is usually the case when creating executable with debug info,
so it is pretty common.
The reason why it is slow is because it has to do faily complex
computations. For non-mergeable sections, section contents are
contiguous in output, so in order to compute an output offset,
we only have to add the output section's base address to an input
offset. But for mergeable strings, section contents are split for
merging, so they are not contigous. We've got to do some lookups.
We used to do binary search on the list of section pieces.
It is slow because I think it's hostile to branch prediction.
This patch replaces it with hash table lookup. Seems it's working
pretty well. Below is "perf stat -r10" output when linking clang
with debug info. In this case this patch speeds up about 4%.
Before:
6584.153205 task-clock (msec) # 1.001 CPUs utilized ( +- 0.09% )
238 context-switches # 0.036 K/sec ( +- 6.59% )
0 cpu-migrations # 0.000 K/sec ( +- 50.92% )
1,067,675 page-faults # 0.162 M/sec ( +- 0.15% )
18,369,931,470 cycles # 2.790 GHz ( +- 0.09% )
9,640,680,143 stalled-cycles-frontend # 52.48% frontend cycles idle ( +- 0.18% )
<not supported> stalled-cycles-backend
21,206,747,787 instructions # 1.15 insns per cycle
# 0.45 stalled cycles per insn ( +- 0.04% )
3,817,398,032 branches # 579.786 M/sec ( +- 0.04% )
132,787,249 branch-misses # 3.48% of all branches ( +- 0.02% )
6.579106511 seconds time elapsed ( +- 0.09% )
After:
6312.317533 task-clock (msec) # 1.001 CPUs utilized ( +- 0.19% )
221 context-switches # 0.035 K/sec ( +- 4.11% )
1 cpu-migrations # 0.000 K/sec ( +- 45.21% )
1,280,775 page-faults # 0.203 M/sec ( +- 0.37% )
17,611,539,150 cycles # 2.790 GHz ( +- 0.19% )
10,285,148,569 stalled-cycles-frontend # 58.40% frontend cycles idle ( +- 0.30% )
<not supported> stalled-cycles-backend
18,794,779,900 instructions # 1.07 insns per cycle
# 0.55 stalled cycles per insn ( +- 0.03% )
3,287,450,865 branches # 520.799 M/sec ( +- 0.03% )
72,259,605 branch-misses # 2.20% of all branches ( +- 0.01% )
6.307411828 seconds time elapsed ( +- 0.19% )
Differential Revision: http://reviews.llvm.org/D20645
llvm-svn: 270999
This patch addresses a post-commit review for r270325. r270325
introduced getReloc function that searches a relocation for a
given range. It always started searching from beginning of relocation
vector, so it was slower than before. Previously, we used to use
the fact that the relocations are sorted. This patch restore it.
llvm-svn: 270572
.eh_frame_hdr assumes that there is only one .eh_frame and
ensures it by assertions. This patch makes .eh_frame a real
singleton object to simplify.
llvm-svn: 270445
Previously, EhFrameHdr section computed addresses to which FDEs are
applied to. This is not an ideal design because EhFrameHdr does not
know much about FDEs unless EhFrame passes the information to EhFrameHdr.
It is what we did.
This patch simplifies the code by making EhFrame to compute the
values and pass the cooked information to EhFrameHdr. EhFrameHdr no
longer have to know about the details of FDEs such as FDE encodings.
llvm-svn: 270393
This patch refactors EHOutputSection using SectionPiece struct.
EHRegion class was removed since we can now directly use SectionPiece.
An incomplete support of large CIE/FDE record (> 2^32 bytes) was removed
because it silently created broken executable. There are several places
in the existing code that "size" field is always 4 bytes and at offset 4
in the record, which is not true for 64-bit size records. We will have to
support that in future, but it is better to error out instead of creating
malformed eh_frame sections.
llvm-svn: 270382
This fixes a potential bug when cross linking very large executables
on LLP64 machines such as Windows. On such platform, uintX_t is 64 bits
while unsigned is 32 bits.
llvm-svn: 270327
If you specify the option in the form of --build-id=0x<hexstring>,
that hexstring is set as a build ID. We observed that the feature
is actually in use in some builds, so we want this feature.
llvm-svn: 269495
This is the option which sorts relocs to optimize dynamic linker performance.
-z combelocs is the default in gold, also it ignores -z nocombreloc,
this patch do the same.
Patch sorts relocations by symbols only and do not create any
DT_REL[A]COUNT entries. That is different with what gold/bfd do.
More information about option is here:
http://www.airs.com/blog/archives/186http://people.redhat.com/jakub/prelink.pdf, p.2
Differential revision: http://reviews.llvm.org/D19528
llvm-svn: 269066
We were previously using an output offset of -1 for both GC'd and tail
merged pieces. We need to distinguish these two cases in order to filter
GC'd symbols from the symbol table -- we were previously asserting when we
asked for the VA of a symbol pointing into a dead piece, which would end
up asking the tail merging string table for an offset even though we hadn't
initialized it properly.
This patch fixes the bug by using an offset of -1 to exclusively mean GC'd
pieces, using 0 for tail merges, and distinguishing the tail merge case from
an offset of 0 by asking the output section whether it is tail merge.
Differential Revision: http://reviews.llvm.org/D19953
llvm-svn: 268604
MIPS N64 ABI introduces .MIPS.options section which specifies miscellaneous
options to be applied to an object/shared/executable file. LLVM as well as
modern versions of GNU tools read and write the only type of the options -
ODK_REGINFO. It is exact copy of .reginfo section used by O32 ABI.
llvm-svn: 268485
This change simplifies the BuildId classes by removing a few member
functions and variables from them. It should also make it easy to
parallelize hash computation in future because now each BuildId object
see all inputs rather than one at a time.
llvm-svn: 268333
This reverts commit r266618. It breaks basically everything.
I think VS2013 doesn't interpret this code in the same way.
The size field (at least) is left uninitialized, causing all sorts of havok
(e.g. creating a 34GB file for a trivial hello world program).
The offending compiler reports itself as follows:
c:\release-vs2013>cl /?
Microsoft (R) C/C++ Optimizing Compiler Version 18.00.40629 for x64
Copyright (C) Microsoft Corporation. All rights reserved.
llvm-svn: 266857
With this patch we use the first scan over the relocations to remember
the information we found about them: will them be relaxed, will a plt be
used, etc.
With that the actual relocation application becomes much simpler. That
is particularly true for the interfaces in Target.h.
This unfortunately means that we now do two passes over relocations for
non SHF_ALLOC sections. I think this can be solved by factoring out the
code that scans a single relocation. It can then be used both as a scan
that record info and for a dedicated direct relocation of non SHF_ALLOC
sections.
I also think it is possible to reduce the number of enum values by
representing a target with just an OutputSection and an offset (which
can be from the start or end).
This should unblock adding features like relocation optimizations.
llvm-svn: 266158
Previously, we supported only one hash function, FNV-1, so
BuildIdSection directly handled hash computation. In this patch,
I made BuildIdSection an abstract class and defined two subclasses,
BuildIdFnv1 and BuildIdMd5.
llvm-svn: 265737
This requires knowing input section offsets in output sections before
scanRelocs. This is generally a good thing and should allow further
simplifications in the creation of dynamic relocations.
llvm-svn: 265673
Some targets might require creation of thunks. For example, MIPS targets
require stubs to call PIC code from non-PIC one. The patch implements
infrastructure for thunk code creation and provides support for MIPS
LA25 stubs. Any MIPS PIC code function is invoked with its address
in register $t9. So if we have a branch instruction from non-PIC code
to the PIC one we cannot make the jump directly and need to create a small
stub to save the target function address.
See page 3-38 ftp://www.linux-mips.org/pub/linux/mips/doc/ABI/mipsabi.pdf
- In relocation scanning phase we ask target about thunk creation necessity
by calling `TagetInfo::needsThunk` method. The `InputSection` class
maintains list of Symbols requires thunk creation.
- Reassigning offsets performed for each input sections after relocation
scanning complete because position of each section might change due
thunk creation.
- The patch introduces new dedicated value for DefinedSynthetic symbols
DefinedSynthetic::SectionEnd. Synthetic symbol with that value always
points to the end of the corresponding output section. That allows to
escape updating synthetic symbols if output sections sizes changes after
relocation scanning due thunk creation.
- In the `InputSection::writeTo` method we write thunks after corresponding
input section. Each thunk is written by calling `TargetInfo::writeThunk` method.
- The patch supports the only type of thunk code for each target. For now,
it is enough.
Differential Revision: http://reviews.llvm.org/D17934
llvm-svn: 265059
Local symbol which requires GOT entry initialized by "page" address.
This address is high 16 bits of sum of the symbol value and the relocation
addend. In the relocation scanning phase final values of symbols are unknown
so to reduce number of allocated GOT entries do the following trick. Save
all output sections referenced by GOT relocations during the relocation
scanning phase. Then later in the `GotSection::finalize` method calculate
number of "pages" required to cover all saved output sections and allocate
appropriate number of GOT entries. We assume the worst case - each 64kb
page of the output section has at least one GOT relocation against it.
Differential Revision: http://reviews.llvm.org/D18349
llvm-svn: 264730
Now local symbols have SymbolBody so we can handle all kind of symbols
in the GotSection::addEntry method. The patch moves the code from
addMipsLocalEntry to addEntry. NFC.
Differential Revision: http://reviews.llvm.org/D18302
llvm-svn: 264032
We want to make SymbolBody the central place to query symbol information.
This patch also renames canBePreempted to isPreemptible because I feel that
the latter is slightly better (the former is three words and the latter
is two words.)
llvm-svn: 263386
This patch implements --build-id. After the linker creates an output file
in the memory buffer, it computes the FNV1 hash of the resulting file
and set the hash to the .note section as a build-id.
GNU ld and gold have the same feature, but their default choice of the
hash function is different. Their default is SHA1.
We made a deliberate choice to not use a secure hash function for the
sake of performance. Computing a secure hash is slow -- for example,
MD5 throughput is usually 400 MB/s or so. SHA1 is slower than that.
As a result, if you pass --build-id to gold, then the linker becomes about
10% slower than that without the option. We observed a similar degradation
in an experimental implementation of build-id for LLD. On the other hand,
we observed only 1-2% performance degradation with the FNV hash.
Since build-id is not for digital certificate or anything, we think that
a very small probability of collision is acceptable.
We considered using other signals such as using input file timestamps as
inputs to a secure hash function. But such signals would have an issue
with build reproducibility (if you build a binary from the same source
tree using the same toolchain, the build id should become the same.)
GNU linkers accepts --build-id=<style> option where style is one of
"MD5", "SHA1", or an arbitrary hex string. That option is out of scope
of this patch.
http://reviews.llvm.org/D18091
llvm-svn: 263292
It was a badly specified hack for when a tls relocation should be
propagated to the dynamic relocation table.
This replaces it with a not as bad hack of saying that a local dynamic
tls relocation is never preempted.
I will try to remove even that second hack in the next patch.
llvm-svn: 262955
There was a known limitation for -r option:
relocations against local symbols were not supported.
For example rel[a].eh_frame sections contained relocations against sections
and that was not supported for -r before. Patch fixes that.
Differential review: http://reviews.llvm.org/D17813
llvm-svn: 262590
For shared libraries we allow any weak undefined symbol to eventually be
resolved, even if we never see a definition in another .so. This matches
the behavior when handling other undefined symbols in a shared library.
For executables, we require seeing a definition in a .so or resolve it
to zero. This is also similar to how non weak symbols are handled.
llvm-svn: 262017
-r, -relocatable - Generate relocatable output
Currently does not have support for files containing
relocation sections with entries that refer to local
symbols (like rel[a].eh_frame which refer to sections
and not to symbols)
Differential revision: http://reviews.llvm.org/D14382
llvm-svn: 261838
There is nothing aarch64 specific in here. If a symbol can be preempted,
we need to copy the full relocation to the dynamic linker.
If a symbol cannot be preempted, we can make the dynamic linker life
easier and produce a relative relocation.
This is directly equivalent to R_X86_64_64 to R_x86_64_RELATIVE
conversion.
llvm-svn: 261678
This patch fixes the R_AARCH64_ABS64 relocation when used in shared mode,
where it requires a dynamic R_AARCH64_RELATIVE relocation. To correct set
the addend on the dynamic relocation (since it will be used by the dynamic
linker), a new TargetInfo specific hook was created (getDynRelativeAddend)
to get the correct addend based on relocation type.
The patch fixes the issues when creating shared library code against
{init,fini}_array, where it issues R_AARCH64_ABS64 relocation against
local symbols.
llvm-svn: 261651
This reduces the .rodata of scyladb from 4501932 to 4334639 bytes (1.038
times smaller).
I don't think it is critical to support tail merging, just exact
duplicates, but given the code organization it was actually a bit easier
to support both.
llvm-svn: 261327
Rafael Espindola