-Assembly parser now properly check the size of the memory operation specified in intel syntax. So 'mov word ptr [5], al' is no longer accepted.
-x86-32 disassembly of these instructions no longer sign extends the 32-bit address immediate based on size.
-Intel syntax printing prints the ptr size and places brackets around the address immediate.
Known remaining issues with these instructions:
-Segment override prefix is not supported. PR16962 and PR16961.
-Immediate size should be changed by address size prefix.
llvm-svn: 189201
Use it to avoid repeating ourselves too often. Also store MVT::SimpleValueType
in the TTI tables so they can be statically initialized, MVT's constructors
create bloated initialization code otherwise.
llvm-svn: 188095
* ELFTypes.h contains template magic for defining types based on endianess, size, and alignment.
* ELFFile.h defines the ELFFile class which provides low level ELF specific access.
* ELFObjectFile.h contains ELFObjectFile which uses ELFFile to implement the ObjectFile interface.
llvm-svn: 188022
This change came about primarily because of two issues in the existing code.
Niether of:
define i64 @test1(i64 %val) {
%in = trunc i64 %val to i32
tail call i32 @ret32(i32 returned %in)
ret i64 %val
}
define i64 @test2(i64 %val) {
tail call i32 @ret32(i32 returned undef)
ret i32 42
}
should be tail calls, and the function sameNoopInput is responsible. The main
problem is that it is completely symmetric in the "tail call" and "ret" value,
but in reality different things are allowed on each side.
For these cases:
1. Any truncation should lead to a larger value being generated by "tail call"
than needed by "ret".
2. Undef should only be allowed as a source for ret, not as a result of the
call.
Along the way I noticed that a mismatch between what this function treats as a
valid truncation and what the backends see can lead to invalid calls as well
(see x86-32 test case).
This patch refactors the code so that instead of being based primarily on
values which it recurses into when necessary, it starts by inspecting the type
and considers each fundamental slot that the backend will see in turn. For
example, given a pathological function that returned {{}, {{}, i32, {}}, i32}
we would consider each "real" i32 in turn, and ask if it passes through
unchanged. This is much closer to what the backend sees as a result of
ComputeValueVTs.
Aside from the bug fixes, this eliminates the recursion that's going on and, I
believe, makes the bulk of the code significantly easier to understand. The
trade-off is the nasty iterators needed to find the real types inside a
returned value.
llvm-svn: 187787
Without explicit dependencies, both per-file action and in-CommonTableGen action could run in parallel.
It races to emit *.inc files simultaneously.
llvm-svn: 187780
Due to the weird and wondeful usual arithmetic conversions, some
calculations involving negative values were getting performed in
uint32_t and then promoted to int64_t, which is really not a good
idea.
Patch by Katsuhiro Ueno.
llvm-svn: 187703
Function attributes are the future! So just query whether we want to realign the
stack directly from the function instead of through a random target options
structure.
llvm-svn: 187618
All insertf*/extractf* functions replaced with insert/extract since we have insertf and inserti forms.
Added lowering for INSERT_VECTOR_ELT / EXTRACT_VECTOR_ELT for 512-bit vectors.
Added lowering for EXTRACT/INSERT subvector for 512-bit vectors.
Added a test.
llvm-svn: 187491
CustomLowerNode was not being called during SplitVectorOperand,
meaning custom legalization could not be used by targets.
This also adds a test case for NVPTX that depends on this custom
legalization.
Differential Revision: http://llvm-reviews.chandlerc.com/D1195
Attempt to fix the buildbots by making the X86 test I just added platform independent
llvm-svn: 187202
This reverts commit 187198. It broke the bots.
The soft float test probably needs a -triple because of name differences.
On the hard float test I am getting a "roundss $1, %xmm0, %xmm0", instead of
"vroundss $1, %xmm0, %xmm0, %xmm0".
llvm-svn: 187201
CustomLowerNode was not being called during SplitVectorOperand,
meaning custom legalization could not be used by targets.
This also adds a test case for NVPTX that depends on this custom
legalization.
Differential Revision: http://llvm-reviews.chandlerc.com/D1195
llvm-svn: 187198
This removes the need to store the asm variant in each row of the single table that existed before. Shaves ~16K off the size of X86AsmParser.o.
llvm-svn: 187026
This makes them consistent with 'bt' which already had this handling. gas has the same behavior. There have been discussions on the mailing list about determining size based on the immediate, but my goal here was just to remove the inconsistency.
llvm-svn: 186904
It only didn't use it before because it seems InstAlias handling in the asm printer fails to count tied operands so it tried to find an xor with 2 operands instead of the 3 it wfails to count tied.
llvm-svn: 186900
Use PMIN/PMAX for UGE/ULE vector comparions to reduce the number of required
instructions. This trick also works for UGT/ULT, but there is no advantage in
doing so. It wouldn't reduce the number of instructions and it would actually
reduce performance.
Reviewer: Ben
radar:5972691
llvm-svn: 186432
In particular:
movsbw %al, %ax --> cbtw
movswl %ax, %eax --> cwtl
movslq %eax, %rax --> cltq
According to Intel's manual those have the same performance characteristics but
come with a smaller encoding.
llvm-svn: 186174
Summary:
This patch adds explicit calling convention types for the Win64 and
System V/x86-64 ABIs. This allows code to override the default, and use
the Win64 convention on a target that wants to use SysV (and
vice-versa). This is needed to implement the `ms_abi` and `sysv_abi` GNU
attributes.
Reviewers:
CC:
llvm-svn: 186144
in-tree implementations of TargetLoweringBase::isFMAFasterThanMulAndAdd in
order to resolve the following issues with fmuladd (i.e. optional FMA)
intrinsics:
1. On X86(-64) targets, ISD::FMA nodes are formed when lowering fmuladd
intrinsics even if the subtarget does not support FMA instructions, leading
to laughably bad code generation in some situations.
2. On AArch64 targets, ISD::FMA nodes are formed for operations on fp128,
resulting in a call to a software fp128 FMA implementation.
3. On PowerPC targets, FMAs are not generated from fmuladd intrinsics on types
like v2f32, v8f32, v4f64, etc., even though they promote, split, scalarize,
etc. to types that support hardware FMAs.
The function has also been slightly renamed for consistency and to force a
merge/build conflict for any out-of-tree target implementing it. To resolve,
see comments and fixed in-tree examples.
llvm-svn: 185956
Explicit references to %AH for an i8 remainder instruction can lead to
references to %AH in a REX prefixed instruction, which causes things to
blow up. Do the same thing in FastISel as we do for DAG isel and instead
shift %AX right by 8 bits and then extract the 8-bit subreg from that
result.
rdar://14203849
http://llvm.org/bugs/show_bug.cgi?id=16105
llvm-svn: 185899
This allows getDebugThreadLocalSymbol to return a generic MCExpr
instead of just a MCSymbolRefExpr.
This is in preparation for supporting debug info for TLS variables
on PowerPC, where we need to describe the variable location using
a more complex expression than just MCSymbolRefExpr.
llvm-svn: 185460
Restrict the current TLS support to X86 ELF for now. Test that we don't
produce it on PPC & we can flesh that test case out with the right thing
once someone implements it.
llvm-svn: 185389
This is an awful implementation of the target hook. But we don't have
abstractions yet for common machine ops, and I don't see any quick way
to make it table-driven.
llvm-svn: 184664
A FastISel optimization was causing us to emit no information for such
parameters & when they go missing we end up emitting a different
function type. By avoiding that shortcut we not only get types correct
(very important) but also location information (handy) - even if it's
only live at the start of a function & may be clobbered later.
Reviewed/discussion by Evan Cheng & Dan Gohman.
llvm-svn: 184604
This is a bit tricky as the xacquire and xrelease hints use the same bytes,
0xf2 and 0xf3, as the repne and rep prefixes.
Fortunately llvm has different llvm MCInst Opcode enums for rep/xrelease
and repne/xacquire. So to make this work a boolean was added the
InternalInstruction struct as part of the Prefix state which is set with the
added logic in readPrefixes() when decoding an instruction to determine
if these prefix bytes are to be disassembled as xacquire or xrelease. Then
we let the matcher pick the normal prefix instructionID and we change the
Opcode after that when it is set into the MCInst being created.
rdar://11019859
llvm-svn: 184490
For decoding, keep the current behavior of always decoding these as their REP
versions. In the future, this could be improved to recognize the cases where
these behave as XACQUIRE and XRELEASE and decode them as such.
llvm-svn: 184207
Frame index handling is now target-agnostic, so delete the target hooks
for creation & asm printing of target-specific addressing in DBG_VALUEs
and any related functions.
llvm-svn: 184067
Replace the ill-defined MinLatency and ILPWindow properties with
with straightforward buffer sizes:
MCSchedMode::MicroOpBufferSize
MCProcResourceDesc::BufferSize
These can be used to more precisely model instruction execution if desired.
Disabled some misched tests temporarily. They'll be reenabled in a few commits.
llvm-svn: 184032
Previously LEA64_32r went through virtually the entire backend thinking it was
using 32-bit registers until its blissful illusions were cruelly snatched away
by MCInstLower and 64-bit equivalents were substituted at the last minute.
This patch makes it behave normally, and take 64-bit registers as sources all
the way through. Previous uses (for 32-bit arithmetic) are accommodated via
SUBREG_TO_REG instructions which make the types and classes agree properly.
llvm-svn: 183693
Add earlyclobber constaints to prevent input register being allocated as
the output register because, according to Intel spec [1], "If any pair
of the index, mask, or destination registers are the same, this
instruction results a UD fault."
---
[1] http://software.intel.com/sites/default/files/319433-014.pdf
llvm-svn: 183327
In ELF (as in MachO), not all relocations point to symbols. Represent this
properly by using a symbol_iterator instead of a SymbolRef. Update llvm-readobj
ELF's dumper to handle relocatios without symbols.
llvm-svn: 183284
The MOV64ri64i32 instruction required hacky MCInst lowering because it
was allocated as setting a GR64, but the eventual instruction ("movl")
only set a GR32. This converts it into a so-called "MOV32ri64" which
still accepts a (appropriate) 64-bit immediate but defines a GR32.
This is then converted to the full GR64 by a SUBREG_TO_REG operation,
thus keeping everyone happy.
This fixes a typo in the opcode field of the original patch, which
should make the legact JIT work again (& adds test for that problem).
llvm-svn: 183068
NOTE: If this broke your out-of-tree backend, in *RegisterInfo.td, change
the instances of SubRegIndex that have a comps template arg to use the
ComposedSubRegIndex class instead.
In TableGen land, this adds Size and Offset attributes to SubRegIndex,
and the ComposedSubRegIndex class, for which the Size and Offset are
computed by TableGen. This also adds an accessor in MCRegisterInfo, and
Size/Offsets for the X86 and ARM subreg indices.
llvm-svn: 183020
The MOV64ri64i32 instruction required hacky MCInst lowering because it was
allocated as setting a GR64, but the eventual instruction ("movl") only set a
GR32. This converts it into a so-called "MOV32ri64" which still accepts a
(appropriate) 64-bit immediate but defines a GR32. This is then converted to
the full GR64 by a SUBREG_TO_REG operation, thus keeping everyone happy.
llvm-svn: 182991
Instead of having a bunch of separate MOV8r0, MOV16r0, ... pseudo-instructions,
it's better to use a single MOV32r0 (which will expand to "xorl %reg, %reg")
and obtain other sizes with EXTRACT_SUBREG and SUBREG_TO_REG. The encoding is
smaller and partial register updates can sometimes be avoided.
Until recently, this sequence was a barrier to rematerialization though. That
should now be fixed so it's an appropriate time to make the change.
llvm-svn: 182928
32-bit writes on amd64 zero out the high bits of the corresponding 64-bit
register. LLVM makes use of this for zero-extension, but until now relied on
custom MCLowering and other code to fixup instructions. Now we have proper
handling of sub-registers, this can be done by creating SUBREG_TO_REG
instructions at selection-time.
Should be no change in functionality.
llvm-svn: 182921
Fixes PR16146: gdb.base__call-ar-st.exp fails after
pre-RA-sched=source fixes.
Patch by Xiaoyi Guo!
This also fixes an unsupported dbg.value test case. Codegen was
previously incorrect but the test was passing by luck.
llvm-svn: 182885
This corrects a problem where x86 instructions that implicitly define/use both
an A-register (RAX, EAX, ..) and EFLAGS were declared as only defining/using
EFLAGS, because the outer "let Defs/Uses = [EFLAGS]" in the various multiclasses
overrides the "let Defs/Uses = [areg]" in BinOpAI.
The instructions deriving from BinOpAI were moved out of the "let Defs", and a
BinOpAI_FF class was created, for instructions that implicitly define and use
EFLAGS and the A-register (SBC, ADC).
llvm-svn: 182883
This is a basic first step towards symbolization of disassembled
instructions. This used to be done using externally provided (C API)
callbacks. This patch introduces:
- the MCSymbolizer class, that mimics the same functions that were used
in the X86 and ARM disassemblers to symbolize immediate operands and
to annotate loads based off PC (for things like c string literals).
- the MCExternalSymbolizer class, which implements the old C API.
- the MCRelocationInfo class, which provides a way for targets to
translate relocations (either object::RelocationRef, or disassembler
C API VariantKinds) to MCExprs.
- the MCObjectSymbolizer class, which does symbolization using what it
finds in an object::ObjectFile. This makes simple symbolization (with
no fancy relocation stuff) work for all object formats!
- x86-64 Mach-O and ELF MCRelocationInfos.
- A basic ARM Mach-O MCRelocationInfo, that provides just enough to
support the C API VariantKinds.
Most of what works in otool (the only user of the old symbolization API
that I know of) for x86-64 symbolic disassembly (-tvV) works, namely:
- symbol references: call _foo; jmp 15 <_foo+50>
- relocations: call _foo-_bar; call _foo-4
- __cf?string: leaq 193(%rip), %rax ## literal pool for "hello"
Stub support is the main missing part (because libObject doesn't know,
among other things, about mach-o indirect symbols).
As for the MCSymbolizer API, instead of relying on the disassemblers
to call the tryAdding* methods, maybe this could be done automagically
using InstrInfo? For instance, even though PC-relative LEAs are used
to get the address of string literals in a typical Mach-O file, a MOV
would be used in an ELF file. And right now, the explicit symbolization
only recognizes PC-relative LEAs. InstrInfo should have already have
most of what is needed to know what to symbolize, so this can
definitely be improved.
I'd also like to remove object::RelocationRef::getValueString (it seems
only used by relocation printing in objdump), as simply printing the
created MCExpr is definitely enough (and cleaner than string concats).
llvm-svn: 182625
The peephole tries to reorder MOV32r0 instructions such that they are
before the instruction that modifies EFLAGS.
The problem is that the peephole does not consider the case where the
instruction that modifies EFLAGS also depends on the previous state of
EFLAGS.
Instead, walk backwards until we find an instruction that has a def for
EFLAGS but does not have a use.
If we find such an instruction, insert the MOV32r0 before it.
If it cannot find such an instruction, skip the optimization.
llvm-svn: 182184
Shuffles that only move an element into position 0 of the vector are common in
the output of the loop vectorizer and often generate suboptimal code when SSSE3
is not available. Lower them to vector shifts if possible.
We still prefer palignr over psrldq because it has higher throughput on
sandybridge.
llvm-svn: 182102
Increase the number of instructions LLVM recognizes as setting the ZF
flag. This allows us to remove test instructions that redundantly
recalculate the flag.
llvm-svn: 181937
It was just a less powerful and more confusing version of
MCCFIInstruction. A side effect is that, since MCCFIInstruction uses
dwarf register numbers, calls to getDwarfRegNum are pushed out, which
should allow further simplifications.
I left the MachineModuleInfo::addFrameMove interface unchanged since
this patch was already fairly big.
llvm-svn: 181680
The issue was that the MatchingInlineAsm and VariantID args to the
MatchInstructionImpl function weren't being set properly. Specifically, when
parsing intel syntax, the parser thought it was parsing inline assembly in the
at&t dialect; that will never be the case.
The crash was caused when the emitter tried to emit the instruction, but the
operands weren't set. When parsing inline assembly we only set the opcode, not
the operands, which is used to lookup the instruction descriptor.
rdar://13854391 and PR15945
Also, this commit reverts r176036. Now that we're correctly parsing the intel
syntax the pushad/popad don't match properly. I've reimplemented that fix using
a MnemonicAlias.
llvm-svn: 181620
We generate a `push' of a random register (%rax) if the stack needs to be
aligned by the size of that register. However, this could mess up compact unwind
generation. In particular, we want to still generate compact unwind in the
presence of this monstrosity.
Check if the push of of the %rax/%eax register. If it is and it's marked with
the `FrameSetup' flag, then we can generate a compact unwind encoding for the
function only if the push is the last FrameSetup instruction.
llvm-svn: 181540
The compact unwind registers were defined in two different
places. It's better just to place them in the function that uses them
and specify that this is a 64-bit or 32-bit machine.
No functionality change.
llvm-svn: 181529
X86ISelLowering has support to treat:
(icmp ne (and (xor %flags, -1), (shl 1, flag)), 0)
as if it were actually:
(icmp eq (and %flags, (shl 1, flag)), 0)
However, r179386 has code at the InstCombine level to handle this.
llvm-svn: 181145
Craig Topper