This patch adds dumping of line table instructions as well as the final
state at each specified pc value in verbose mode. This is essentially
the same as the default in Darwin's dwarfdump. Dumping the actual line
table opcodes can be particularly useful for something like debugging a
bad `.debug_line` section.
Differential revision: https://reviews.llvm.org/D37971
llvm-svn: 313910
As discussed on llvm-dev in
http://lists.llvm.org/pipermail/llvm-dev/2017-September/117301.html
this changes the command line interface of llvm-dwarfdump to match the
one used by the dwarfdump utility shipping on macOS. In addition to
being shorter to type this format also has the advantage of allowing
more than one section to be specified at the same time.
In a nutshell, with this change
$ llvm-dwarfdump --debug-dump=info
$ llvm-dwarfdump --debug-dump=apple-objc
becomes
$ dwarfdump --debug-info --apple-objc
Differential Revision: https://reviews.llvm.org/D37714
llvm-svn: 312970
Summary:
Add a new load command LC_BUILD_VERSION. It is a generic version of
LC_*_VERSION_MIN load_command used on Apple platforms. Instead of having
a seperate load command for each platform, LC_BUILD_VERSION is recording
platform info as an enum. It also records SDK version, min_os, and tools
that used to build the binary.
rdar://problem/29781291
Reviewers: enderby
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D29044
llvm-svn: 292824
One more attempt to re-commit the patch r285355, which I had to revert in r285362, because some tests were failing (the reason is because the size of the line_table varied depending on the full file name).
In the past the compiler always emitted .debug_line version 2, though some opcodes from DWARF 3 (e.g. DW_LNS_set_prologue_end, DW_LNS_set_epilogue_begin or DW_LNS_set_isa) and from DWARF 4 could be emitted by the compiler.
This patch changes version information of .debug_line to exactly match the DWARF version. For .debug_line version 4, a new field maximum_operations_per_instruction is emitted.
Differential Revision: https://reviews.llvm.org/D16697
llvm-svn: 289925
In the past the compiler always emitted .debug_line version 2, though some opcodes from DWARF 3 (e.g. DW_LNS_set_prologue_end, DW_LNS_set_epilogue_begin or DW_LNS_set_isa) and from DWARF 4 could be emitted by the compiler.
This patch changes version information of .debug_line to exactly match the DWARF version. For .debug_line version 4, a new field maximum_operations_per_instruction is emitted.
Differential Revision: https://reviews.llvm.org/D16697
llvm-svn: 285355
The relative vtable ABI (PR26723) needs PLT relocations to refer to virtual
functions defined in other DSOs. The unnamed_addr attribute means that the
function's address is not significant, so we're allowed to substitute it
with the address of a PLT entry.
Also includes a bonus feature: addends for COFF image-relative references.
Differential Revision: http://reviews.llvm.org/D17938
llvm-svn: 267211
We'd disabled them on x86 because back in the early days some host tools
couldn't handle the new load commands. This no longer holds: anyone capable of
deploying Clang should be able to deploy its copies of ar/ranlib/etc.
rdar://25254790
llvm-svn: 267075
Since we can't emit diagnostics for missing "jmp 1f" labels until the end of
the file, we need to be able to restore the context used to calculate
file/line. This is basically the "# line file" directive that's being used at
the time the expression is seen.
rdar://25706972
llvm-svn: 266238
Before, ELF at least managed a diagnostic but it was a completely untraceable
"undefined symbol" error. MachO had a variety of even worse behaviours: crash,
emit corrupt file, or an equally bad message.
llvm-svn: 265984
This patch adds support for the MachO .alt_entry assembly directive, and uses
it for global aliases with non-zero GEP offsets. The alt_entry flag indicates
that a symbol should be layed out immediately after the preceding symbol.
Conceptually it introduces an alternate entry point for a function or data
structure. E.g.:
safe_foo:
// check preconditions for foo
.alt_entry fast_foo
fast_foo:
// body of foo, can assume preconditions.
The .alt_entry flag is also implicitly set on assembly aliases of the form:
a = b + C
where C is a non-zero constant, since these have the same effect as an
alt_entry symbol: they introduce a label that cannot be moved relative to the
preceding one. Setting the alt_entry flag on aliases of this form fixes
http://llvm.org/PR25381.
llvm-svn: 263521
MCDwarf emits a canned abbreviation table, but was not emitting proper
forms for DWARF version 4, which is the default after r249655.
Differential Revision: http://reviews.llvm.org/D15732
llvm-svn: 256313
This was fixed in r254751, but untestable until r254774, which
added the necessary command line flag to llc. Add a test now
to make sure this doesn't regress again.
llvm-svn: 254814
Currently, if the assembler encounters an error after parsing (such as an
out-of-range fixup), it reports this as a fatal error, and so stops after the
first error. However, for most of these there is an obvious way to recover
after emitting the error, such as emitting the fixup with a value of zero. This
means that we can report on all of the errors in a file, not just the first
one. MCContext::reportError records the fact that an error was encountered, so
we won't actually emit an object file with the incorrect contents.
Differential Revision: http://reviews.llvm.org/D14717
llvm-svn: 253328
These MachO file directives are used by linkers and other tools to provide
compatibility information, much like the existing .ios_version_min and
.macosx_version_min.
llvm-svn: 251569
Recommit r250342: move coal-sections-powerpc.s to subdirectory for powerpc.
Some background on why we don't have to use *coal* sections anymore:
Long ago when C++ was new and "weak" had not been standardized, an attempt was
made in cctools to support C++ inlines that can be coalesced by putting them
into their own section (TEXT/textcoal_nt instead of TEXT/text).
The current macho linker supports the weak-def bit on any symbol to allow it to
be coalesced, but the compiler still puts weak-def functions/data into alternate
section names, which the linker must map back to the base section name.
This patch makes changes that are necessary to prevent the compiler from using
the "coal" sections and have it use the non-coal sections instead when the
target architecture is not powerpc:
TEXT/textcoal_nt instead use TEXT/text
TEXT/const_coal instead use TEXT/const
DATA/datacoal_nt instead use DATA/data
If the target is powerpc, we continue to use the *coal* sections since anyone
targeting powerpc is probably using an old linker that doesn't have support for
the weak-def bits.
Also, have the assembler issue a warning if it encounters a *coal* section in
the assembly file and inform the users to use the non-coal sections instead.
rdar://problem/14265330
Differential Revision: http://reviews.llvm.org/D13188
llvm-svn: 250370
Recommit r250342: add -arch=ppc32 to the RUN lines of powerpc tests.
Some background on why we don't have to use *coal* sections anymore:
Long ago when C++ was new and "weak" had not been standardized, an attempt was
made in cctools to support C++ inlines that can be coalesced by putting them
into their own section (TEXT/textcoal_nt instead of TEXT/text).
The current macho linker supports the weak-def bit on any symbol to allow it to
be coalesced, but the compiler still puts weak-def functions/data into alternate
section names, which the linker must map back to the base section name.
This patch makes changes that are necessary to prevent the compiler from using
the "coal" sections and have it use the non-coal sections instead when the
target architecture is not powerpc:
TEXT/textcoal_nt instead use TEXT/text
TEXT/const_coal instead use TEXT/const
DATA/datacoal_nt instead use DATA/data
If the target is powerpc, we continue to use the *coal* sections since anyone
targeting powerpc is probably using an old linker that doesn't have support for
the weak-def bits.
Also, have the assembler issue a warning if it encounters a *coal* section in
the assembly file and inform the users to use the non-coal sections instead.
rdar://problem/14265330
Differential Revision: http://reviews.llvm.org/D13188
llvm-svn: 250349
Some background on why we don't have to use *coal* sections anymore:
Long ago when C++ was new and "weak" had not been standardized, an attempt was
made in cctools to support C++ inlines that can be coalesced by putting them
into their own section (TEXT/textcoal_nt instead of TEXT/text).
The current macho linker supports the weak-def bit on any symbol to allow it to
be coalesced, but the compiler still puts weak-def functions/data into alternate
section names, which the linker must map back to the base section name.
This patch makes changes that are necessary to prevent the compiler from using
the "coal" sections and have it use the non-coal sections instead when the
target architecture is not powerpc:
TEXT/textcoal_nt instead use TEXT/text
TEXT/const_coal instead use TEXT/const
DATA/datacoal_nt instead use DATA/data
If the target is powerpc, we continue to use the *coal* sections since anyone
targeting powerpc is probably using an old linker that doesn't have support for
the weak-def bits.
Also, have the assembler issue a warning if it encounters a *coal* section in
the assembly file and inform the users to use the non-coal sections instead.
rdar://problem/14265330
Differential Revision: http://reviews.llvm.org/D13188
llvm-svn: 250342
This sort-of deprecates macho-dump. It may take still a little while
to garbage collect it, but at least there's no real usage of it in
the tree anymore. New tests should always rely on llvm-readobj or
llvm-objdump.
llvm-svn: 247235
Example output:
Linker Options {
Size: 32
Count: 2
Strings [
Value: -framework
Value: Cocoa
]
}
There were only two tests using this -- so I converted them as part of
this commit rather than separately.
Differential Revision: http://reviews.llvm.org/D12702
llvm-svn: 247106
This commit accomplish two goals:
1) it's a step forward to deprecate macho-dump, now less than 40 tests
rely on it.
2) It tests all the MachO specific features introduced in llvm-readobj in
the following commits: r246789, r246665, r246474.
While the conversion is mostly mechanical (I double-checked all the
tests output one by one, but still), a post-commit review is greatly
appreciated.
llvm-svn: 246904
This is (almost) everything under MC/MachO/ARM. There are still some
cases missing, because llvm-readobj doesn't (yet) support some features,
that macho-dump provides. I plan to reduce the gap between them shortly.
llvm-svn: 245302
On Darwin, it is required to stamp the object file with VERSION_MIN load
command. This commit will provide a VERSRION_MIN load command to the
MachO file that doesn't specify the version itself by inferring from
Target Triple.
llvm-svn: 244059
The test part of r241149 has been reverted in r241451, due to misplaced test cases.
This patch splits those test cases among the appropriate targets.
Differential Revision: http://reviews.llvm.org/D10897
llvm-svn: 241283
Check for symbols in MCValue before using them. Bail out early in case
they are null. This fixes PR23779.
Differential Revision: http://reviews.llvm.org/D10712
rdar://problem/21532830
llvm-svn: 240649
This causes errors like:
ld: error: blah.o: requires dynamic R_X86_64_PC32 reloc against '' which
may overflow at runtime; recompile with -fPIC
blah.cc:function f(): error: undefined reference to ''
blah.o:g(): error: undefined reference to ''
I have not yet come up with an appropriate reproduction.
llvm-svn: 240394
Now that pr23900 is fixed, we can bring it back with no changes.
Original message:
Make all temporary symbols unnamed.
What this does is make all symbols that would otherwise start with a .L
(or L on MachO) unnamed.
Some of these symbols still show up in the symbol table, but we can just
make them unnamed.
In order to make sure we produce identical results when going thought assembly,
all .L (not just the compiler produced ones), are now unnamed.
Running llc on llvm-as.opt.bc, the peak memory usage goes from 208.24MB to
205.57MB.
llvm-svn: 240302
What this does is make all symbols that would otherwise start with a .L
(or L on MachO) unnamed.
Some of these symbols still show up in the symbol table, but we can just
make them unnamed.
In order to make sure we produce identical results when going thought assembly,
all .L (not just the compiler produced ones), are now unnamed.
Running llc on llvm-as.opt.bc, the peak memory usage goes from 208.24MB to
205.57MB.
llvm-svn: 240130
In a relocation target can take 3 basic forms
* A r_value in scattered relocations.
* A symbol in external relocations.
* A section is non-external relocations.
Have the dump reflect that. With this change we go from
CHECK-NEXT: Extern: 0
CHECK-NEXT: Type: X86_64_RELOC_SUBTRACTOR (5)
CHECK-NEXT: Symbol: 0x2
CHECK-NEXT: Scattered: 0
To just
// CHECK-NEXT: Type: X86_64_RELOC_SUBTRACTOR (5)
// CHECK-NEXT: Section: __data (2)
Since the relocation is with a section, we print the seciton name and don't
need to say that it is not scattered or external.
Someone motivated can add further special cases for things like
ARM64_RELOC_ADDEND and ARM_RELOC_PAIR.
llvm-svn: 240073
Fix the FIXME and remove this old as(1) compat option. It was useful for
bringup of the integrated assembler to diff object files, but now it's
just causing more relocations than strictly necessary to be generated.
rdar://21201804
llvm-svn: 239084
ld64 currently mishandles internal pointer relocations (i.e.
ARM64_RELOC_UNSIGNED referred to by section & offset rather than symbol). The
existing __cfstring clause was an early discovery and workaround for this, but
the problem is wider and we should avoid such relocations wherever possible for
now.
This code should be reverted to allowing internal relocations as soon as
possible.
PR23437.
llvm-svn: 237621
Jonas Devlieghere