Changes the default Windows target triple returned by
GetHostTriple.cmake from the old environment names (which we wanted to
move away from) to newer, normalized ones. This also requires updating
all tests to use the new systems names in constraints.
Differential Revision: https://reviews.llvm.org/D47381
llvm-svn: 339307
Don't try to generate large PIC code for non-ELF targets. Neither COFF
nor MachO have relocations for large position independent code, and
users have been using "large PIC" code models to JIT 64-bit code for a
while now. With this change, if they are generating ELF code, their
JITed code will truly be PIC, but if they target MachO or COFF, it will
contain 64-bit immediates that directly reference external symbols. For
a JIT, that's perfectly fine.
llvm-svn: 337740
Reverting because this is causing failures in the LLDB test suite on
GreenDragon.
LLVM ERROR: unsupported relocation with subtraction expression, symbol
'__GLOBAL_OFFSET_TABLE_' can not be undefined in a subtraction
expression
llvm-svn: 335894
LLJIT is a prefabricated ORC based JIT class that is meant to be the go-to
replacement for MCJIT. Unlike OrcMCJITReplacement (which will continue to be
supported) it is not API or bug-for-bug compatible, but targets the same
use cases: Simple, non-lazy compilation and execution of LLVM IR.
LLLazyJIT extends LLJIT with support for function-at-a-time lazy compilation,
similar to what was provided by LLVM's original (now long deprecated) JIT APIs.
This commit also contains some simple utility classes (CtorDtorRunner2,
LocalCXXRuntimeOverrides2, JITTargetMachineBuilder) to support LLJIT and
LLLazyJIT.
Both of these classes are works in progress. Feedback from JIT clients is very
welcome!
llvm-svn: 335670
The large code model allows code and data segments to exceed 2GB, which
means that some symbol references may require a displacement that cannot
be encoded as a displacement from RIP. The large PIC model even relaxes
the assumption that the GOT itself is within 2GB of all code. Therefore,
we need a special code sequence to materialize it:
.LtmpN:
leaq .LtmpN(%rip), %rbx
movabsq $_GLOBAL_OFFSET_TABLE_-.LtmpN, %rax # Scratch
addq %rax, %rbx # GOT base reg
From that, non-local references go through the GOT base register instead
of being PC-relative loads. Local references typically use GOTOFF
symbols, like this:
movq extern_gv@GOT(%rbx), %rax
movq local_gv@GOTOFF(%rbx), %rax
All calls end up being indirect:
movabsq $local_fn@GOTOFF, %rax
addq %rbx, %rax
callq *%rax
The medium code model retains the assumption that the code segment is
less than 2GB, so calls are once again direct, and the RIP-relative
loads can be used to access the GOT. Materializing the GOT is easy:
leaq _GLOBAL_OFFSET_TABLE_(%rip), %rbx # GOT base reg
DSO local data accesses will use it:
movq local_gv@GOTOFF(%rbx), %rax
Non-local data accesses will use RIP-relative addressing, which means we
may not always need to materialize the GOT base:
movq extern_gv@GOTPCREL(%rip), %rax
Direct calls are basically the same as they are in the small code model:
They use direct, PC-relative addressing, and the PLT is used for calls
to non-local functions.
This patch adds reasonably comprehensive testing of LEA, but there are
lots of interesting folding opportunities that are unimplemented.
I restricted the MCJIT/eh-lg-pic.ll test to Linux, since the large PIC
code model is not implemented for MachO yet.
Differential Revision: https://reviews.llvm.org/D47211
llvm-svn: 335508
The relocation for branch instructions in the dynamic loader of ExecutionEngine assumes branch instructions with R_PPC64_REL24 relocation type are only bl. However, with the tail call optimization, b instructions can be also used to jump into another function.
This patch makes the relocation to keep bits in the branch instruction other than the jump offset to avoid relocation rewrites a b instruction into bl.
Differential Revision: https://reviews.llvm.org/D47456
llvm-svn: 333502
Previously thumb bits were only checked for external relocations (thumb to arm
code and vice-versa). This patch adds detection for thumb callees in the same
section asthe (also thumb) caller.
The MachO/Thumb test case is updated to cover this, and redundant checks
(handled by the MachO/ARM test) are removed.
llvm-svn: 331838
Summary: The bit widths are wrong.
Reviewers: bkramer, lhames, hans
Reviewed By: hans
Subscribers: hans, nemanjai, kbarton, llvm-commits
Differential Revision: https://reviews.llvm.org/D45361
llvm-svn: 329573
test case.
r326290 fixed the assertion for decodeAddend, but not encodeAddend. The
regression test failed to catch this because it was missing the
subsections_via_symbols flag, so the desired relocation was not applied.
This patch also fixes the formatting of the assertion from r326290.
llvm-svn: 326406
Summary:
IMAGE_REL_AMD64_ADDR32NB relocations are currently set to zero in all cases.
This patch sets the relocation to the correct value when possible and shows an error when not.
Reviewers: enderby, lhames, compnerd
Reviewed By: compnerd
Subscribers: LepelTsmok, compnerd, martell, llvm-commits
Differential Revision: https://reviews.llvm.org/D30709
llvm-svn: 325700
These tests assumes availability of external symbols provided by the
C++ library, but those won't be available in case when the C++ library
is statically linked because lli itself doesn't need these.
This uses llvm-readobj -needed-libs to check if C++ library is linked as
shared library and exposes that information as a feature to lit.
Differential Revision: https://reviews.llvm.org/D41272
llvm-svn: 321981
As part of the unification of the debug format and the MIR format, print
MBB references as '%bb.5'.
The MIR printer prints the IR name of a MBB only for block definitions.
* find . \( -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#" << ([a-zA-Z0-9_]+)->getNumber\(\)/" << printMBBReference(*\1)/g'
* find . \( -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#" << ([a-zA-Z0-9_]+)\.getNumber\(\)/" << printMBBReference(\1)/g'
* find . \( -name "*.txt" -o -name "*.s" -o -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#([0-9]+)/%bb.\1/g'
* grep -nr 'BB#' and fix
Differential Revision: https://reviews.llvm.org/D40422
llvm-svn: 319665
We want to be writing a 32bit value, so we should be writing 4 bytes
instead of 2.
Patch by Alex Langford <apl@fb.com>.
Differential Revision: https://reviews.llvm.org/D38872
llvm-svn: 315964
This reverts commit SVN r313668. The original test case attempted to
write a pointer value into 16-bits, although the value may exceed the
range representable in 16-bits. Ensure that the symbol is located in
the address space such that its absolute address is representable in
16-bits. This should fix the assertion failure that was seen on the
Windows hosts.
llvm-svn: 313822
This reverts commit SVN r313654. Seems that it is triggering an
assertion on Windows specifically. Revert until I can build on Windows
and look into what is happening there.
llvm-svn: 313668
Add support for the R_AARCH64_ABS{16,32} relocations in the execution
engine. This is primarily used for DWARF debug information relocations
and needed by the LLVM JIT to support JITing for lldb.
Patch by Alex Langford!
llvm-svn: 313654
Re-committing after r311325 fixed an unintentional use of '#' comments in
clang.
The '#' token is not a comment for all targets (on ARM and AArch64 it marks an
immediate operand), so we shouldn't treat it as such.
Comments are already converted to AsmToken::EndOfStatement by
AsmLexer::LexLineComment, so this check was unnecessary.
Differential Revision: https://reviews.llvm.org/D36405
llvm-svn: 311326
The %T lit expansion expands to a common directory shared between all the tests in the same directory, which is unexpected and unintuitive, and more importantly, it's been a source of subtle race conditions and flaky tests. In https://reviews.llvm.org/D35396, it was agreed that it would be best to simply ban %T and only keep %t, which is unique to each test. When a test needs a temporary directory, it can just create one using mkdir %t.
This patch removes %T in llvm.
Differential Revision: https://reviews.llvm.org/D36495
llvm-svn: 310953
This patch adds support for thumb relocations to RuntimeDyldMachOARM, and adds
a target-specific flags field to JITSymbolFlags (so that on ARM we can record
whether each symbol is Thumb-mode code).
RuntimeDyldImpl::emitSection is modified to ensure that stubs memory is
correctly aligned based on the size returned by getStubAlignment().
llvm-svn: 310517
The '#' token is not a comment for all targets (on ARM and AArch64 it marks an
immediate operand), so we shouldn't treat it as such.
Comments are already converted to AsmToken::EndOfStatement by
AsmLexer::LexLineComment, so this check was unnecessary.
Differential Revision: https://reviews.llvm.org/D36405
llvm-svn: 310457
I was surprised to see the code model being passed to MC. After all,
it assembles code, it doesn't create it.
The one place it is used is in the expansion of .cfi directives to
handle .eh_frame being more that 2gb away from the code.
As far as I can tell, gnu assembler doesn't even have an option to
enable this. Compiling a c file with gcc -mcmodel=large produces a
regular looking .eh_frame. This is probably because in practice linker
parse and recreate .eh_frames.
In llvm this is used because the JIT can place the code and .eh_frame
very far apart. Ideally we would fix the jit and delete this
option. This is hard.
Apart from confusion another problem with the current interface is
that most callers pass CodeModel::Default, which is bad since MC has
no way to map it to the target default if it actually needed to.
This patch then replaces the argument with a boolean with a default
value. The vast majority of users don't ever need to look at it. In
fact, only CodeGen and llvm-mc use it and llvm-mc just to enable more
testing.
llvm-svn: 309884
The PowerPC part of processRelocationRef currently assumes that external
symbols can be identified by checking for SymType == SymbolRef::ST_Unknown.
This is actually incorrect in some cases, causing relocation overflows to
be mis-detected. The correct check is to test whether Value.SymbolName
is null.
Includes test case. Note that it is a bit tricky to replicate the exact
condition that triggers the bug in a test case. The one included here
seems to fail reliably (before the fix) across different operating
system versions on Power, but it still makes a few assumptions (called
out in the test case comments).
Also add ppc64le platform name to the supported list in the lit.local.cfg
files for the MCJIT and OrcMCJIT directories, since those tests were
currently not run at all.
Fixes PR32650.
Reviewer: hfinkel
Differential Revision: https://reviews.llvm.org/D33402
llvm-svn: 303637
Summary:
Debug info sections, (or non-SHF_ALLOC sections in general) should be
linked as if their load address was zero to emulate the behavior of the
static linker.
This bug was discovered because it was breaking lldb expression evaluation on
linux.
Reviewers: lhames
Subscribers: aprantl, eugene, clayborg, lldb-commits, llvm-commits
Differential Revision: https://reviews.llvm.org/D32899
llvm-svn: 303239
This patch implements two GOT relocations:
R_AARCH64_ADR_GOT_PAGE and R_AARCH64_LD64_GOT_LO12_NC
Differential revision: https://reviews.llvm.org/D28571
llvm-svn: 294191
This patch doesn't create thunk for branch operation when following conditions are met:
- Architecture is AArch64
- Relocation target is in the same object file
- Relocation target is close enough to be encoded in immediate offset
In such case we branch directly to the target instead of branching to thunk
Differential revision: https://reviews.llvm.org/D28108
llvm-svn: 291431
Canonicalize all CMake booleans to 0/1 before passing them to lit, to
ensure that the Python side handles all of them consistently
and correctly. 0/1 is a safe choice of values that trigger the same
boolean interpretation in CMake, Python and C++.
Furthermore, using them without quotes improves the chance Python will
explicitly fail when an incorrect value (such as ON/OFF, TRUE/FALSE,
YES/NO) is accidentally passed, rather than silently misinterpreting
the value.
This replaces a lot of different logics spread around lit site files,
attempting to partially reproduce the boolean logic used in CMake
and usually silently failing when an uncommon value was used instead.
In fact, some of them were never working correctly since different
values were assigned in CMake and checked in Python.
The alternative solution could be to create a common parser for CMake
booleans in lit and use it consistently throughout the site files.
However, it does not seem like the best idea to create redundant
implementation of the same logic and have to follow upstream if it ever
is extended to handle more values.
Differential Revision: https://reviews.llvm.org/D28294
llvm-svn: 291284
Summary: The relocation is missing mask so an address that has non-zero bits in 47:43 may overwrite the register number. (Frequently shows up as target register changed to `xzr`....)
Reviewers: t.p.northover, lhames
Subscribers: davide, aemerson, rengolin, llvm-commits
Differential Revision: https://reviews.llvm.org/D27609
llvm-svn: 289880
Otherwise we set it always to zero, which is not correct,
and we assert inside alignTo (Assertion failed:
Align != 0u && "Align can't be 0.").
Differential Revision: https://reviews.llvm.org/D26173
llvm-svn: 285841
Petr Hosek