Without this when lld failed to replace the output file it would leave
the temporary behind. The problem is that the existing logic is
- cancel the delete flag
- rename
We have to cancel first to avoid renaming and then crashing and
deleting the old version. What is missing then is deleting the
temporary file if the rename fails.
This can be an issue on both unix and windows, but I am not sure how
to cause the rename to fail reliably on unix. I think it can be done
on ZFS since it has an ACL system similar to what windows uses, but
adding support for checking that in llvm-lit is probably not worth it.
llvm-svn: 319786
We already allowed keep+discard. It is important to be able to discard
a temporary if a rename fail. It is also convenient as it allows the
use of RAII for discarding.
Allow discarding twice for similar reasons.
llvm-svn: 318867
This requires a small change to TempFile: allowing a discard after a
failed keep.
With this the cache now handles signals and reuses a fd instead of
reopening the file.
llvm-svn: 318322
This just adds a TempFile class and replaces the use in
FileOutputBuffer with it.
The only difference for now is better error handling. Followup work includes:
- Convert other user of temporary files to it.
- Add support for automatically deleting on windows.
- Add a createUnnamed method that returns a potentially unnamed
file. It would be actually unnamed on modern linux and have a
unknown name on windows.
llvm-svn: 318069
This allows clients to avoid an unnecessary fs::status() call on each
directory entry. Because the information returned by FindFirstFileEx
is a subset of the information returned by a regular status() call,
I needed to extract a base class from file_status that contains only
that information.
On my machine, this reduces the time required to enumerate a ThinLTO
cache directory containing 520k files from almost 4 minutes to less
than 2 seconds.
Differential Revision: https://reviews.llvm.org/D38716
llvm-svn: 315378
This creates a new library called BinaryFormat that has all of
the headers from llvm/Support containing structure and layout
definitions for various types of binary formats like dwarf, coff,
elf, etc as well as the code for identifying a file from its
magic.
Differential Revision: https://reviews.llvm.org/D33843
llvm-svn: 304864
In doing so, clean up the MD5 interface a little. Most
existing users only care about the lower 8 bytes of an MD5,
but for some users that care about the upper and lower,
there wasn't a good interface. Furthermore, consumers
of the MD5 checksum were required to handle endianness
details on their own, so it seems reasonable to abstract
this into a nicer interface that just gives you the right
value.
Differential Revision: https://reviews.llvm.org/D31105
llvm-svn: 298322
Previously which path syntax we supported dependend on what
platform we were compiling LLVM on. While this is normally
desirable, there are situations where we need to be able to
handle a path that we know was generated on a remote host.
Remote debugging, for example, or parsing debug info.
99% of the code in LLVM for handling paths was platform
agnostic and literally just a few branches were gated behind
pre-processor checks, so this changes those sites to use
runtime checks instead, and adds a flag to every path
API that allows one to override the host native syntax.
Differential Revision: https://reviews.llvm.org/D30858
llvm-svn: 298004
This change adds support for functions to set and get file permissions, in a similar manner to the C++17 permissions() function in <filesystem>. The setter uses chmod on Unix systems and SetFileAttributes on Windows, setting the permissions as passed in. The getter simply uses the existing status() function.
Prior to this change, status() would always return an unknown value for the permissions on a Windows file, making it impossible to test the new function on Windows. I have therefore added support for this as well. On Linux, prior to this change, the permissions included the file type, which should actually be accessed via a different member of the file_status class.
Note that on Windows, only the *_write permission bits have any affect - if any are set, the file is writable, and if not, the file is read-only. This is in common with what MSDN describes for their behaviour of std::filesystem::permissions(), and also what boost::filesystem does.
The motivation behind this change is so that we can easily test behaviour on read-only files in LLVM unit tests, but I am sure that others may find it useful in some situations.
Reviewers: zturner, amccarth, aaron.ballman
Differential Revision: https://reviews.llvm.org/D30736
llvm-svn: 297945
We already have a function create_directories() which can create
an entire tree, and remove() which can remove an empty directory,
but we do not have remove_directories() which can remove an entire
tree. This patch adds such a function.
Because removing a directory tree can have dangerous consequences
when the tree contains a directory symlink, the patch here updates
the existing directory_iterator construct to optionally not follow
symlinks (previously it would always follow symlinks). The delete
algorithm uses this flag so that for symlinks, only the links are
removed, and not the targets.
On Windows this is implemented with SHFileOperation, which also
does not recurse into symbolic links or junctions.
Differential Revision: https://reviews.llvm.org/D30676
llvm-svn: 297314
This was originall reverted due to some test failures in
ModuleCache and TestCompDirSymlink. These issues have all
been resolved and the code now passes all tests.
Differential Revision: https://reviews.llvm.org/D30698
llvm-svn: 297300
This deletes LLDB's FileType enumeration and replaces all
users, and all calls to functions that check whether a file
exists etc with corresponding calls to LLVM.
Differential Revision: https://reviews.llvm.org/D30624
llvm-svn: 297116
Windows does not treat `~` as a reference to home directory, so the call
to `llvm::sys::path::native` on, say, `~/somedir` produces `~\somedir`,
which has different meaning than the original path. With this change
tilde is expanded on Windows to user profile directory. Such behavior
keeps original meaning of the path and is consistent with the algorithm
of `llvm::sys::path::home_directory`.
Differential Revision: https://reviews.llvm.org/D27527
llvm-svn: 296590
This is the first part of an effort to add wasm binary
support across all llvm tools.
Patch by Sam Clegg
Differential Revision: https://reviews.llvm.org/D26172
llvm-svn: 288251
This patch makes it possible to identify object files created by CL.exe
with /GL option. Such file contains Microsoft proprietary intermediate
code instead of target machine code to do LTO.
I need this to print out user-friendly error message from LLD.
Differential Revision: https://reviews.llvm.org/D26645
llvm-svn: 286919
/../foo is still a proper path after removing the dotdot. This should
now finally match https://9p.io/sys/doc/lexnames.html [Cleaning names].
llvm-svn: 284384
Darwin added support in its Xcode 8.0 tools (released in the beta) for universal
files where offsets and sizes for the objects are 64-bits to allow support for
objects contained in universal files to be larger then 4gb. The change is very
straight forward. There is a new magic number that differs by one bit, much
like the 64-bit Mach-O files. Then there is a new structure that follow the
fat_header that has the same layout but with the offset and size fields using
64-bit values instead of 32-bit values.
rdar://26899493
llvm-svn: 273207
Summary:
Add support to control where files for a distributed backend (the
individual index files and optional imports files) are created.
This is invoked with a new thinlto-prefix-replace option in the gold
plugin and llvm-lto. If specified, expects a string of the form
"oldprefix:newprefix", and instead of generating these files in the
same directory path as the corresponding bitcode file, will use a path
formed by replacing the bitcode file's path prefix matching oldprefix
with newprefix.
Also add a new replace_path_prefix helper to Path.h in libSupport.
Depends on D19636.
Reviewers: joker.eph
Subscribers: llvm-commits, joker.eph
Differential Revision: http://reviews.llvm.org/D19644
llvm-svn: 269771
at least as big as the mach header to be identified as a Mach-O file and
make sure smaller files are not identified as a Mach-O files but as
unknown files. Also fix identify_magic() so it looks at all 4 bytes of
the filetype field when determining the type of the Mach-O file.
Then fix the macho-invalid-header test case to check that it is an
unknown file and make sure it does not get the error for
object_error::parse_failed. And also update the unit tests.
llvm-svn: 258883
Summary:
The new function sys::path::user_cache_directory tries to discover
a directory suitable for cache storage for current system user.
On Windows and Darwin it returns a path to system-specific user cache directory.
On Linux it follows XDG Base Directory Specification, what is:
- use non-empty $XDG_CACHE_HOME env var,
- use $HOME/.cache.
Reviewers: chapuni, aaron.ballman, rafael
Subscribers: rafael, aaron.ballman, llvm-commits
Differential Revision: http://reviews.llvm.org/D13801
llvm-svn: 251784
This reverts commit 228874. For some reason users reported
seeing Clang taking up 25+GB of memory and bringing down
machines with this change. Reverting until we figure it out.
llvm-svn: 228890
For Windows, filename_pos() tries to find the filename by
searching for separators after the last :. Instead, it should
really check for the only location that a : is valid, which is
in the second character, and search for separators after that.
llvm-svn: 228874
utils/sort_includes.py.
I clearly haven't done this in a while, so more changed than usual. This
even uncovered a missing include from the InstrProf library that I've
added. No functionality changed here, just mechanical cleanup of the
include order.
llvm-svn: 225974
Rafael Espindola